SONOFF

gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

SONOFF

Post by gaurav » Mon May 08, 2017 1:19 pm

Can you build a firmware which can replicate the gate module firmware on SONOFF SV?

Thank you in Advance. :)

User avatar
pzygmunt
Posts: 4985
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Re: SONOFF

Post by pzygmunt » Mon May 08, 2017 1:23 pm

You can build by yourself using ESP8266 - IOT SDK
https://www.supla.org/pl/download

Zybi
Posts: 1267
Joined: Sun Jun 26, 2016 4:24 pm

Re: SONOFF

Post by Zybi » Mon May 08, 2017 7:46 pm

Or ... You can upload and test this software:

https://github.com/zchmielak/ESP8266/bl ... 2.0_p5.rar

gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

Re: SONOFF

Post by gaurav » Mon Jun 26, 2017 6:27 am

When I build sonoff firmware from SDK sonoff doesn't boots up. I tried the same firmware on Nodemcu with no luck. I even tried with cfg with pullup but it didn't solved the issue. Am I missing anything?

User avatar
pzygmunt
Posts: 4985
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Re: SONOFF

Post by pzygmunt » Mon Jun 26, 2017 9:27 am

What do you see on the console ?

gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

Re: SONOFF

Post by gaurav » Mon Jun 26, 2017 11:13 am

how can I check it on console?

User avatar
pzygmunt
Posts: 4985
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Re: SONOFF

Post by pzygmunt » Mon Jun 26, 2017 12:57 pm

You can use putty.
Speed rate 74880

gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

Re: SONOFF

Post by gaurav » Tue Jul 04, 2017 12:39 pm

putty_1.png
putty_1.png (30.13 KiB) Viewed 13569 times
This is what I got when I reset the nodemcu.

User avatar
pzygmunt
Posts: 4985
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Re: SONOFF

Post by pzygmunt » Tue Jul 04, 2017 1:02 pm

Use esp_init_data_default.bin

User avatar
pzygmunt
Posts: 4985
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Re: SONOFF

Post by pzygmunt » Tue Jul 04, 2017 1:02 pm

Erase all flash and use esp_init_data_default.bin

Post Reply