SONOFF

gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

I flashed firmware from your link and it worked but firmware from the IoT SDK is not working. What could be the reason?
gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

The firmware which I am flashing is built from IoTSDK. I have installed the latest SDK still the firmware is getting flashed with proper configuration as discussed earlier but doesn't works.
Kindly help.
User avatar
pzygmunt
Posts: 18207
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

What do you see on the console ?
gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

I didn't checked the console. But I flashed firmware next day and it worked. I don't know what happened but it worked.

Can you tell me that is there anyway to integrate the wall switch to sonoff so that I can control it locally.
Is there anyway?
User avatar
pzygmunt
Posts: 18207
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

You can connect wall switch to the sonoff button.
gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

Not like using sonoff button. But using live or neutral wire connection from the wall switch to sonoff. I have seen some devices which provide live wire input switch so that we can use the existing switches. Like this device.
Attachments
image_source_google.jpg
image_source_google.jpg (46.84 KiB) Viewed 7010 times
User avatar
pzygmunt
Posts: 18207
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

I'm sorry but I do not understand what you want to do.
gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

I want to integrate wall switch to the devices like sonoff so that I can control fans and lights from supla application as well as from wall switch.
gaurav
Posts: 82
Joined: Mon May 08, 2017 9:49 am

I have changed #define CFG_BTN_PRESS_COUNT 10 to #define CFG_BTN_PRESS_COUNT 5 still it takes 10 press to enter config mode. What could be the reason?
User avatar
pzygmunt
Posts: 18207
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

gaurav wrote: Thu Jul 12, 2018 8:32 am I have changed #define CFG_BTN_PRESS_COUNT 10 to #define CFG_BTN_PRESS_COUNT 5 still it takes 10 press to enter config mode. What could be the reason?
BTN is BISTABLE ?
Post Reply

Return to “General discussion”