Request firmware for DIGOO DG-SP202 Smart Socket with Energy Monitor

Post Reply
klambrev
Posts: 1
Joined: Sun Feb 24, 2019 5:11 pm

Request firmware for DIGOO DG-SP202 Smart Socket with Energy Monitor

Post by klambrev » Sun Feb 24, 2019 5:33 pm

Hello,
I congratulate you for the great project!

Can anyone compile a flash for DIGOO DG-SP202?
Image
I copy GPIOs from the Tasmota

Code: Select all

 { "Digoo DG-SP202",  // Digoo DG-SP202
                       // https://www.banggood.com/DIGOO-DG-SP202-Dual-EU-Plug-Smart-WIFI-Socket-Individual-Controllable-Energy-Monitor-Remote-Control-Timing-Smart-Home-Outlet-let-p-1375323.html
     GPIO_KEY1,        // GPIO00 Button1
     0,                // GPIO01 Serial RXD
     0,                // GPIO02
     0,                // GPIO03 Serial TXD
     GPIO_HJL_CF,      // GPIO04 BL0937 or HJL-01 CF power
     GPIO_NRG_CF1,     // GPIO05 BL0937 or HJL-01 CF1 current / voltage
                       // GPIO06 (SD_CLK   Flash)
                       // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
                       // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
     0,                // GPIO09 (SD_DATA2 Flash QIO or ESP8285)
     0,                // GPIO10 (SD_DATA3 Flash QIO or ESP8285)
                       // GPIO11 (SD_CMD   Flash)
     GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage)
     GPIO_LED1,        // GPIO13 Blue Leds - Link Status
     GPIO_REL2,        // GPIO14 Relay2 (0 = Off, 1 = On) and Red Led
     GPIO_REL1,        // GPIO15 Relay1 (0 = Off, 1 = On) and Red Led
     GPIO_KEY2_NP,     // GPIO16 Button2, externally pulled up
     0
  }

Post Reply