Don't see a sensor response (solved)

Post Reply
jangolen
Posts: 16
Joined: Thu Apr 14, 2016 6:10 pm

Thu Apr 14, 2016 6:30 pm

Hi, All!
First of all, very nice project, nice concept and cool grafic. I like It!

That my problem: I don't see any response on GPIO12 change state from pullup at Vcc to Gnd.
Is it implemented yet or not? Is it picture of gate/rollers/liquid must change like a lamp?
hardware: esp8266 esp12 from ai-thinker just buttons and LED thermometer is on the way from china.

Mike
Last edited by jangolen on Fri Apr 15, 2016 5:43 pm, edited 1 time in total.
User avatar
pzygmunt
Posts: 6887
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Fri Apr 15, 2016 8:06 am

Which firmware do you use ?
jangolen
Posts: 16
Joined: Thu Apr 14, 2016 6:10 pm

Fri Apr 15, 2016 3:54 pm

SUPLA-RS-MODULE rollershutter-module-firmware v1.2
files eagle.flash.bin from github dowloaded 11.04
I also tried gate firmware with same effect.
jangolen
Posts: 16
Joined: Thu Apr 14, 2016 6:10 pm

Fri Apr 15, 2016 5:02 pm

I found my mistake in polish topics there
Now it's work perfect.

Sensor is connecting input to power +3.3V not the ground (as always I do in my projects). In my opinion is much safer not to expose power source to sensor beware to shortcut.
input0.jpg
something like that schema
input0.jpg (8 KiB) Viewed 2427 times
But I am agree with you in that case, output and input together is difficult to do without conflicts.


Thank You for your job. Maybe I can help with translate Supla site in russian :) if you want to do this.
User avatar
pzygmunt
Posts: 6887
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Sat Apr 16, 2016 3:59 pm

I'm glad that everything works. You can join to team and help us with translation if you want.
jangolen
Posts: 16
Joined: Thu Apr 14, 2016 6:10 pm

Sun Apr 24, 2016 6:29 am

Hi!
I really love this projects, and agree to help him wide spread. Send me in private english language pack and I translate it back to you.
jangolen
Posts: 16
Joined: Thu Apr 14, 2016 6:10 pm

Thu Apr 28, 2016 10:03 pm

Uff... Done for CLOUD in 2 files
please see pull request
don't now is't done all right because it is my first work of same sort
Hope it is be useful for SUPLA :)
User avatar
pzygmunt
Posts: 6887
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków
Contact:

Sat Apr 30, 2016 5:30 pm

Thank you for translations, please read private message from me.
Post Reply