GUI-Generic + State GPIO (Gate, brama, kalitka)

vlymar
Posty: 26
Rejestracja: pn maja 28, 2018 5:22 am
Lokalizacja: Ukraine

Hi, I stitched your controller with a GUI-Generic.bin firmware, tell me which device from the list you need to choose that I could see the state of the gate and so on., Where to specify, thank you!
Albert
Posty: 576
Rejestracja: pt sty 04, 2019 8:32 pm
Lokalizacja: Chełm

You need to find "KONTAKTRON". Show screens from settings - USTAWIENIA URZĄDZEŃ (in 192.168.4.1). It was few different names for functions
vlymar
Posty: 26
Rejestracja: pn maja 28, 2018 5:22 am
Lokalizacja: Ukraine

Thank you, I will look.
mickarp
Posty: 56
Rejestracja: śr maja 27, 2020 2:33 pm

you need :
  • Sonoff SV
  • 2x Kontaktron
1,2. GUI Generic
12.png
12.png (83.21 KiB) Przejrzano 1439 razy
3. Supla Cloud
3.png
3.png (78.55 KiB) Przejrzano 1439 razy
4,5,6. Supla Cloud - config Sonoff SV
456.png
456.png (215.83 KiB) Przejrzano 1439 razy
vlymar
Posty: 26
Rejestracja: pn maja 28, 2018 5:22 am
Lokalizacja: Ukraine

Thank you very much, for extensive manual, trying! ;)
vlymar
Posty: 26
Rejestracja: pn maja 28, 2018 5:22 am
Lokalizacja: Ukraine

I do not have such a menu item in the firmware, which I do wrong .. :(
Załączniki
1.jpg
1.jpg (97.8 KiB) Przejrzano 1357 razy
jaku2k
Posty: 830
Rejestracja: ndz maja 24, 2020 8:40 pm
Kontakt:

vlymar pisze: pn cze 14, 2021 12:37 pm I do not have such a menu item in the firmware, which I do wrong .. :(
Hello,
did you remember to generate firmware with Limit switches?
Regards
Jakub
vlymar
Posty: 26
Rejestracja: pn maja 28, 2018 5:22 am
Lokalizacja: Ukraine

Probably I forgot .. right now I will try again!
vlymar
Posty: 26
Rejestracja: pn maja 28, 2018 5:22 am
Lokalizacja: Ukraine

Everything happened, thanks again! ;) :)
ODPOWIEDZ

Wróć do „GUI Generic”