Witam
Zastanawiam się nad zmontowaniem czegoś takiego do zbiornika na deszczówkę.
Jak wygląda wskazanie poziomu w aplikacji klienckiej?
Pozdrawiam
Czujnik głębokości dla cieczy z czujnikiem różnicy ciśnień
Witam,
po dwóch miesiącach wróciłem do tematu czujnika. Połączenia sprawdziłem, parametry w programie poprawiłem, programator: kupiłem (z lenistwa ). Niemniej, dziękuję Panie Robercie za instrukcję.
Wszystko zlutowałem na płytce i... dioda na ESP miga jedynie raz (po podłączeniu zasilania), a potem nic się nie dzieje. Mimo że wciskam przycisk WIFI config, nie pojawia się sieć ESP. Co zrobiłem źle? Dodam, że ESP włożone do programatora tworzy sieć WIFI i wszystko zdaje się działać jak należy.
Hello,
after two months I came back to this project. I checked the connections, corrected parameters and bought programmer. I soldered everything on a circuit board and... ESP's diode flashes only once (after turning on) and nothing happens. Although I press WIFI config button, there is no ESP's WIFI. What am I doing wrong? In addition when ESP is in programmer, it spreads WIFI and everything seems to work properly.
PS. Dodaję linki do zdjęć płytki.
Links to photos of my board.
https://drive.google.com/drive/folders/ ... sp=sharing
po dwóch miesiącach wróciłem do tematu czujnika. Połączenia sprawdziłem, parametry w programie poprawiłem, programator: kupiłem (z lenistwa ). Niemniej, dziękuję Panie Robercie za instrukcję.
Wszystko zlutowałem na płytce i... dioda na ESP miga jedynie raz (po podłączeniu zasilania), a potem nic się nie dzieje. Mimo że wciskam przycisk WIFI config, nie pojawia się sieć ESP. Co zrobiłem źle? Dodam, że ESP włożone do programatora tworzy sieć WIFI i wszystko zdaje się działać jak należy.
Hello,
after two months I came back to this project. I checked the connections, corrected parameters and bought programmer. I soldered everything on a circuit board and... ESP's diode flashes only once (after turning on) and nothing happens. Although I press WIFI config button, there is no ESP's WIFI. What am I doing wrong? In addition when ESP is in programmer, it spreads WIFI and everything seems to work properly.
PS. Dodaję linki do zdjęć płytki.
Links to photos of my board.
https://drive.google.com/drive/folders/ ... sp=sharing
Pozdrawiam
Jakub
PS. Czekam na Supla Offline Party 2024
Jakub
PS. Czekam na Supla Offline Party 2024
No, I'm using the LD1086V33.
Pozdrawiam
Jakub
PS. Czekam na Supla Offline Party 2024
Jakub
PS. Czekam na Supla Offline Party 2024
Do you have any idea whats wrong @elmaya? The weirdest thing about it is that when I tried connecting other esp on breadboard, the same way as on a circuit board, it also didn't work (diode flashes only once after powering it up). But when I put it into programmer and connect usb magic happens . ESP spreads WIFI and flashes with blue diode.
Pozdrawiam
Jakub
PS. Czekam na Supla Offline Party 2024
Jakub
PS. Czekam na Supla Offline Party 2024
Hello,
I added those resistors and after powering on - ESP starts to flash with diode and turns on WIFI, so I can see it in my phone. Unfortunetly, I can't connect to it - after taping it to connect - it disappears and doesn't want to come back (only restarting device restarts the sequence). When I press buttons nothing happens . What should I do?
I added those resistors and after powering on - ESP starts to flash with diode and turns on WIFI, so I can see it in my phone. Unfortunetly, I can't connect to it - after taping it to connect - it disappears and doesn't want to come back (only restarting device restarts the sequence). When I press buttons nothing happens . What should I do?
Pozdrawiam
Jakub
PS. Czekam na Supla Offline Party 2024
Jakub
PS. Czekam na Supla Offline Party 2024
Should I use 10kOhm resistors?
Pozdrawiam
Jakub
PS. Czekam na Supla Offline Party 2024
Jakub
PS. Czekam na Supla Offline Party 2024
Yes, when it is in programmer I can.
Pozdrawiam
Jakub
PS. Czekam na Supla Offline Party 2024
Jakub
PS. Czekam na Supla Offline Party 2024