Automatyczny reset - da się?

Masz pomysł na funkcjonalność lub koncepcję na rozwój projektu. Opisz wszystko tutaj.
Awatar użytkownika
Dawid84
Posty: 154
Rejestracja: pn sty 14, 2019 12:45 pm
Lokalizacja: Piekary Śląskie

Elmaya, can you do something about my problem?
Thank you
Pozdrawiam
Dawid
elmaya
Posty: 1482
Rejestracja: śr cze 27, 2018 5:48 pm
Lokalizacja: El Saucejo - Sevilla

Dawid84 pisze: pt sty 03, 2020 9:36 pm Elmaya, can you do something about my problem?
Thank you
Do you use the same SSID and Password on the router and amplifier?
I see two different IPs:
192.168.8.3 / 255.255.255.0 / 192.168.8.164
192.168.8.177 / 255.255.255.0 / 192.168.8.1
witch is the ip that corresponds to the amplifier?

Here it is connected and reset the counter to 0

Kod: Zaznacz cały

Connected
Adres IP:
192.168.8.177 / 255.255.255.0 / 192.168.8.1
(RSSI): -56 dBm
Pinging host www.google.com
Success!!
Pinging host www.google.com
Success!!
What version are you using, I see continuous WiFi disconnections?
Awatar użytkownika
Dawid84
Posty: 154
Rejestracja: pn sty 14, 2019 12:45 pm
Lokalizacja: Piekary Śląskie

In the main router I have the SSID HUAWEI-B525-DOM, and in the HUAWEI-B525-DOM1 amplifier I have a module registered and connected to the HUAWEI-B5B5-DOM1 with the amplifier and it should be reset if there is no internet access from the main router. as I wrote earlier, if on the main router it blocks access of the amplifier to the Internet, there is no reset, but if I remove the amplifier from the socket, it will be reset after a certain time
Pozdrawiam
Dawid
kwiatek67
Posty: 37
Rejestracja: pn sie 12, 2019 8:16 pm

Koledzy który z tych softów będzie najlepszy do Yunshan ?
Gucio2607.
Posty: 508
Rejestracja: wt sie 22, 2017 1:56 pm

A nie można by zrobić tego na sonnof'ie?. Taki przedłużacz który po prostu rozłącza zasilanie routera.
Zainstalowane:
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
kwiatek67
Posty: 37
Rejestracja: pn sie 12, 2019 8:16 pm

Gucio2607. pisze: sob lut 29, 2020 9:40 am A nie można by zrobić tego na sonnof'ie?. Taki przedłużacz który po prostu rozłącza zasilanie routera.
Mój router zasilany jest z zewnętrznego zasilacza 12 V i to za jego pomocą będę zasilał Yunshana.
elmaya
Posty: 1482
Rejestracja: śr cze 27, 2018 5:48 pm
Lokalizacja: El Saucejo - Sevilla

kwiatek67 pisze: sob lut 29, 2020 8:47 am Koledzy który z tych softów będzie najlepszy do Yunshan ?
the one on the first page of the thread,
if you read a little sure you find it :lol:
kwiatek67
Posty: 37
Rejestracja: pn sie 12, 2019 8:16 pm

elmaya pisze: sob lut 29, 2020 2:40 pm
kwiatek67 pisze: sob lut 29, 2020 8:47 am Koledzy który z tych softów będzie najlepszy do Yunshan ?
the one on the first page of the thread,
if you read a little sure you find it :lol:
Works, thank you
Gucio2607.
Posty: 508
Rejestracja: wt sie 22, 2017 1:56 pm

Podpowie ktoś z jakimi parametrami wgrać do yunshan? Wgrywamy tylko jeden plik? Po wgraniu świeci się tylko czerwona dioda
Zainstalowane:
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
Gucio2607.
Posty: 508
Rejestracja: wt sie 22, 2017 1:56 pm

Nikt?
Zainstalowane:
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
ODPOWIEDZ

Wróć do „Pomysły i koncepcje”