Kompilacja ESP8266

[maghost]

Witam

Jak wygląda teraz kompilacja w nowych wersjach firmware'u?
W jaki sposób wybrać płytkę?
W starszych wersjach wybierało się płytkę poprzez odkomentowanie jej w kodzie.
Teraz widzę nowe pliki tj. genmisc.sh, genmisc.bat (czyżby możliwość kompilacji pod Winowsem?), build.sh zmieniło się dosyć wyraźnie.
Posiadam tylko pobrane źródła.
Czy konieczny jest Eclipse? Czy muszę coś jeszcze posiadać?

[pzygmunt]

Uruchamia się skrypt ./build.sh
Jako parametr należy podać nazwę płytki.
Uruchomienie ./build.sh spowoduje wyświetlenie dostępnych płytek.


root@debian:/home/user01/workspace-supla/ESP8266_IOT# ./build.sh
Usage:
build.sh BOARD_TYPE
--------------------------
Board types:
dht11_esp01
dht22_esp01
am2302_esp01
thermometer_esp01
thermometer_esp01_ds_gpio0
wifisocket
wifisocket_esp01
wifisocket_esp01_thermometer
wifisocket_54
gate_module
gate_module_dht11
gate_module_dht22
gate_module_esp01
gate_module_esp01_ds
gate_module_wroom
gate_module2_wroom
rs_module
rs_module_wroom
starter1_module_wroom
jangoe_rs

[maghost]

Udało się do polowy
Wpisałem poprawne scieżki, ale poprawnie kompilują się tylko firmwary esp01 jak i jangoe.

W przypadku kompilacji np. wifisocket (wyciag z terminala):

Kod: Zaznacz cały

supla@supla-iotsdk:~/Devel/supla-core/ESP8266_IOT$ ./build.sh wifisocket
make -C user clean;  make -C driver clean;  make -C supla-dev clean;
make[1]: Entering directory '/home/supla/Devel/supla-core/ESP8266_IOT/user'
rm -f -r .output/eagle/debug
make[1]: Leaving directory '/home/supla/Devel/supla-core/ESP8266_IOT/user'
make[1]: Entering directory '/home/supla/Devel/supla-core/ESP8266_IOT/driver'
rm -f -r .output/eagle/debug
make[1]: Leaving directory '/home/supla/Devel/supla-core/ESP8266_IOT/driver'
make[1]: Entering directory '/home/supla/Devel/supla-core/ESP8266_IOT/supla-dev'
rm -f -r .output/eagle/debug
make[1]: Leaving directory '/home/supla/Devel/supla-core/ESP8266_IOT/supla-dev'
rm -f -r .output/eagle/debug
make[1]: Entering directory '/home/supla/Devel/supla-core/ESP8266_IOT/user'
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle supla_ds18b20.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle supla_esp_cfgmode.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle supla_esp_cfg.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle user_main.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle supla_esp_devconn.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle supla_esp_gpio.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle supla_w1.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle supla_dht.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/supla_dht.o -c supla_dht.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/supla_w1.o -c supla_w1.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/supla_esp_gpio.o -c supla_esp_gpio.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/supla_esp_devconn.o -c supla_esp_devconn.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/user_main.o -c user_main.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/supla_esp_cfg.o -c supla_esp_cfg.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/supla_esp_cfgmode.o -c supla_esp_cfgmode.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./  -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/supla_ds18b20.o -c supla_ds18b20.c
xtensa-lx106-elf-ar ru .output/eagle/debug/lib/libuser.a .output/eagle/debug/obj/supla_dht.o .output/eagle/debug/obj/supla_w1.o .output/eagle/debug/obj/supla_esp_gpio.o .output/eagle/debug/obj/supla_esp_devconn.o .output/eagle/debug/obj/user_main.o .output/eagle/debug/obj/supla_esp_cfg.o .output/eagle/debug/obj/supla_esp_cfgmode.o .output/eagle/debug/obj/supla_ds18b20.o 
xtensa-lx106-elf-ar: creating .output/eagle/debug/lib/libuser.a
make[1]: Leaving directory '/home/supla/Devel/supla-core/ESP8266_IOT/user'
make[1]: Entering directory '/home/supla/Devel/supla-core/ESP8266_IOT/driver'
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle key.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include -I ../include -I ../include/eagle dht22.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./ -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/dht22.o -c dht22.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include -I ./ -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/key.o -c key.c
xtensa-lx106-elf-ar ru .output/eagle/debug/lib/libdriver.a .output/eagle/debug/obj/dht22.o .output/eagle/debug/obj/key.o 
xtensa-lx106-elf-ar: creating .output/eagle/debug/lib/libdriver.a
make[1]: Leaving directory '/home/supla/Devel/supla-core/ESP8266_IOT/driver'
make[1]: Entering directory '/home/supla/Devel/supla-core/ESP8266_IOT/supla-dev'
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle proto.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle espconnection.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle srpc.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle lck.c
DEPEND: xtensa-lx106-elf-gcc -M -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket -I include -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle log.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include  -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/log.o -c log.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include  -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/lck.o -c lck.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include  -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/srpc.o -c srpc.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include  -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/espconnection.o -c espconnection.c
xtensa-lx106-elf-gcc -Os -g -Wpointer-arith -Wundef -Werror -Wl,-EL -fno-inline-functions -nostdlib -mlongcalls -mtext-section-literals -ffunction-sections -fdata-sections  -DICACHE_FLASH -DESP8266 -D__SINGLE_THREAD -D__EH_DISABLED -D__BOARD_wifisocket  -I include  -I ./ -I ../include/supla-dev -I ../include -I ../include -I ../include/eagle  -o .output/eagle/debug/obj/proto.o -c proto.c
xtensa-lx106-elf-ar ru .output/eagle/debug/lib/libsupladev.a .output/eagle/debug/obj/log.o .output/eagle/debug/obj/lck.o .output/eagle/debug/obj/srpc.o .output/eagle/debug/obj/espconnection.o .output/eagle/debug/obj/proto.o 
xtensa-lx106-elf-ar: creating .output/eagle/debug/lib/libsupladev.a
make[1]: Leaving directory '/home/supla/Devel/supla-core/ESP8266_IOT/supla-dev'
xtensa-lx106-elf-gcc  -L/home/supla/Devel/Espressif/ESP8266_IOT_SDK/lib -Wl,--gc-sections -nostdlib -T/home/supla/Devel/Espressif/ESP8266_IOT_SDK/ld/eagle.app.v6.ld -Wl,--no-check-sections -u call_user_start -Wl,-static -Wl,--start-group -lgcc -lpp -lphy -lnet80211 -lwpa -lcrypto -lssl -lmain -llwip user/.output/eagle/debug/lib/libuser.a driver/.output/eagle/debug/lib/libdriver.a supla-dev/.output/eagle/debug/lib/libsupladev.a -Wl,--end-group -o .output/eagle/debug/image/eagle.app.v6.out 
user/.output/eagle/debug/lib/libuser.a(supla_ds18b20.o):(.text.supla_ds18b20_read_temperatureB+0x20): undefined reference to `supla_esp_devconn_on_temp_changed'
user/.output/eagle/debug/lib/libuser.a(supla_ds18b20.o): In function `supla_ds18b20_read_temperatureB':
/home/supla/Devel/supla-core/ESP8266_IOT/user/supla_ds18b20.c:130: undefined reference to `supla_esp_devconn_on_temp_changed'
collect2: error: ld returned 1 exit status
/home/supla/Devel/Espressif/ESP8266_IOT_SDK/Makefile:362: recipe for target '.output/eagle/debug/image/eagle.app.v6.out' failed
make: *** [.output/eagle/debug/image/eagle.app.v6.out] Error 1

[pzygmunt]

Pobierz aktualną wersję z Github-a spróbuj ponownie. Powinno być ok.

[slawek]

Uruchamia się skrypt ./build.sh
Jako parametr należy podać nazwę płytki.
Uruchomienie ./build.sh spowoduje wyświetlenie dostępnych płytek.


root@debian:/home/user01/workspace-supla/ESP8266_IOT# ./build.sh
Usage:
build.sh BOARD_TYPE
--------------------------
Board types:
dht11_esp01
dht22_esp01
am2302_esp01
thermometer_esp01
thermometer_esp01_ds_gpio0
wifisocket
wifisocket_esp01
wifisocket_esp01_thermometer
wifisocket_54
gate_module
gate_module_dht11
gate_module_dht22
gate_module_esp01
gate_module_esp01_ds
gate_module_wroom
gate_module2_wroom
rs_module
rs_module_wroom
starter1_module_wroom
jangoe_rs

Wszystko się zgadza, a jak mam wybrać płytkę? gdzie wpisać ścieżkę?

[pzygmunt]

np:

./build.sh dht11_esp01

[slawek]

Mam:
make: *** No rule to make target 'clean'. Stop.
make: *** No targets specified and no makefile found. Stop.
Czegoś brak?

[pzygmunt]

Musisz zmodyfikować ścieżki w build.sh

[Rafaello]

Witam

próbuje skompilować firmware dla 4 przekaźników czy mógłbyś mi w tym pomóc.
Czy wystarczy w Eclipse supla_esp.h dodać kolejne wiersze

PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO4_U, FUNC_GPIO4); \
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO5_U, FUNC_GPIO5); \
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO6_U, FUNC_GPIO6); \
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO7_U, FUNC_GPIO7); \

oraz

#define RELAY1_PORT 4
#define RELAY2_PORT 5
#define RELAY3_PORT 6
#define RELAY4_PORT 7

przy próbie kompilacji w BUILD z ustawionym WIFISOCKET wyskakuje poniższy komunikat


make: *** No rule to make target 'clean'. Stop.
make: *** No targets specified and no makefile found. Stop.

z góry wielkie dzięki za pomoc

ps.
szacun za chyba pierwszy taki polski projekt.
mam wdrożone IOT rosyjskie dla dallasów.
Obecnie pracuje nad oświetleniem awaryjnym i pomyślałem o SUPLA.

pzdr
Rafał

[pzygmunt]

Musisz jeszcze dodać dodatkowe kanały tutaj:

https://github.com/SUPLA/supla-core/blo ... onn.c#L424

Jeżeli trzeba to również dodatkowe timer-y
https://github.com/SUPLA/supla-core/blo ... conn.c#L34

i wszędzie tam gdzie występuje RELAY1_PORT lub RELAY2_PORT analogicznie trzeba dodać kolejne porty.