SONOFF
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
I flashed 1MB blank.bin from address 0x00000 and then flashed the sonoff socket firmware but the problem was same.
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
Yes, I used it at address 0xfc000 when I flashed firmware.
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
This problem has arised with "Sonoff Basic R2 Ver1.0 2017-10-11". Earlier boards of sonoff basic get flashed easily
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
I am using this configuration
boot file address 0x00000
sonoff socket firmware 0x01000
esp_int 0xFC000
flash size 1 MB
baud rate 115200
SPI speed 40MHz
SPI Mode DOUT.
boot file address 0x00000
sonoff socket firmware 0x01000
esp_int 0xFC000
flash size 1 MB
baud rate 115200
SPI speed 40MHz
SPI Mode DOUT.
-
- Posts: 1511
- Joined: Sun Jun 26, 2016 4:24 pm