Pomiar wysokich temperatur

elmaya
Posty: 1482
Rejestracja: śr cze 27, 2018 5:48 pm
Lokalizacja: El Saucejo - Sevilla

stachu1000 pisze: wt mar 03, 2020 7:41 pm Cześć.
Można do tego dodać jeszcze DS18B20 tak abym mógł też temperaturę na piecu monitorować?
Rozumiem, że potrzebujesz dodatkowego kanału (DS18B20)
do pomiaru temperatur od -55º do + 125º

I understand that you need an additional channel (DS18B20)
for measuring temperatures from -55º to + 125º


PORT SETTINGS:
DS18B20 = GPIO 5 // D1
CFG BUTTON = GPIO 0 // D3
status_led = GPIO 2 // D4
thermo DO = GPIO 14 // D5
thermo CS = GPIO 12 // D6
thermo CLK = GPIO 13 // D7

To bring the device into configuration mode, press and hold button for at least 10 sec.
When in configuration mode, the device goes into Access Point mode and status led goes On.

In order to enter or change the settings, you need to:

- Connect to WiFi called „K_Probe” from any computer with a wireless network card and Internet browser.
- Open access page: http://192.168.4.1
on the configuration page enter the data for "suplaServer, Email and Supla Device Name (name with which it will be seen in the cloud)"

K_Probe_DS_DOUT_16Mbit.rar
(606.07 KiB) Pobrany 131 razy
stachu1000
Posty: 53
Rejestracja: czw lut 28, 2019 8:22 pm

elmaya pisze: wt mar 03, 2020 8:18 pm
Rozumiem, że potrzebujesz dodatkowego kanału (DS18B20)
do pomiaru temperatur od -55º do + 125º

I understand that you need an additional channel (DS18B20)
for measuring temperatures from -55º to + 125º
Tak dokładnie o to mi chodziło, dzisiaj wieczorem przetestuję i dam znać czy jest ok.
Dzięki :)
wisniowy
Posty: 2
Rejestracja: czw mar 02, 2023 8:08 pm

Dzień dobry,
Czy jest już uruchomiona komunikacja z modułem MAX31865 ?

Takie niestety mam zamontowane na stałe - bez możliwości wymiany...
ODPOWIEDZ

Wróć do „Sprzęt”