Dyskusja ogólna [bramka Zigbee]

Moderator: vajera

User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

vajera wrote: Tue Jan 14, 2025 9:48 pm
Zibi_007 wrote: Tue Jan 14, 2025 9:18 pm
vajera wrote: Tue Jan 14, 2025 6:25 pm Dodałem licznik pomiaru zużycia energii - na moim gniazdku działa od strony formalnej natomiast muszę jeszcze zweryfikować wartości raportowane.
[...]
Program skompilował się normalnie.
Licznik się dodaje i pokazuje w kanałach. Na razie same ---- ;-)
Możesz zobaczyć w Serialu czy pojawiają się raporty dotyczące atrybutów RMS Voltage/Current/Power
Na serialu tylko takie coś (za ostatnie 10 min.):

Code: Select all

22:55:50.535 -> Send: [53 55 50 4C 41 ]
22:55:50.631 -> Recv: [53 55 50 4C 41 17 67 00 00 00 32 00 00 00 10 00 00 00 66 DD 86 67 00 00 00 00 EC 76 00 00 00 00 00 00 53 55 50 4C 41 ]
22:56:15.610 -> Send: [53 55 50 4C 41 17 68 00 00 00 28 00 00 00 10 00 00 00 5F 0C 00 00 00 00 00 00 34 58 02 00 00 00 00 00 ]
22:56:15.610 -> Send: [53 55 50 4C 41 ]
22:56:15.707 -> Recv: [53 55 50 4C 41 17 68 00 00 00 32 00 00 00 10 00 00 00 7F DD 86 67 00 00 00 00 1B D2 00 00 00 00 00 00 53 55 50 4C 41 ]
22:56:40.683 -> Send: [53 55 50 4C 41 17 69 00 00 00 28 00 00 00 10 00 00 00 78 0C 00 00 00 00 00 00 EB 5D 03 00 00 00 00 00 ]
22:56:40.683 -> Send: [53 55 50 4C 41 ]
22:56:40.780 -> Recv: [53 55 50 4C 41 17 69 00 00 00 32 00 00 00 10 00 00 00 98 DD 86 67 00 00 00 00 77 DB 01 00 00 00 00 00 53 55 50 4C 41 ]
22:57:05.754 -> Send: [53 55 50 4C 41 17 6A 00 00 00 28 00 00 00 10 00 00 00 91 0C 00 00 00 00 00 00 1E 77 04 00 00 00 00 00 ]
22:57:05.754 -> Send: [53 55 50 4C 41 ]
22:57:05.853 -> Recv: [53 55 50 4C 41 17 6A 00 00 00 32 00 00 00 10 00 00 00 B1 DD 86 67 00 00 00 00 6F F9 02 00 00 00 00 00 53 55 50 4C 41 ]
22:57:30.804 -> Send: [53 55 50 4C 41 17 6B 00 00 00 28 00 00 00 10 00 00 00 AA 0C 00 00 00 00 00 00 93 88 05 00 00 00 00 00 ]
22:57:30.804 -> Send: [53 55 50 4C 41 ]
22:57:30.901 -> Recv: [53 55 50 4C 41 17 6B 00 00 00 32 00 00 00 10 00 00 00 CA DD 86 67 00 00 00 00 EA 4B 04 00 00 00 00 00 53 55 50 4C 41 ]
22:57:55.884 -> Send: [53 55 50 4C 41 17 6C 00 00 00 28 00 00 00 10 00 00 00 C3 0C 00 00 00 00 00 00 BF A5 06 00 00 00 00 00 ]
22:57:55.884 -> Send: [53 55 50 4C 41 ]
22:57:55.980 -> Recv: [53 55 50 4C 41 17 6C 00 00 00 32 00 00 00 10 00 00 00 E3 DD 86 67 00 00 00 00 18 A4 05 00 00 00 00 00 53 55 50 4C 41 ]
22:58:20.952 -> Send: [53 55 50 4C 41 17 6D 00 00 00 28 00 00 00 10 00 00 00 DC 0C 00 00 00 00 00 00 66 AB 07 00 00 00 00 00 ]
22:58:20.952 -> Send: [53 55 50 4C 41 ]
22:58:21.049 -> Recv: [53 55 50 4C 41 17 6D 00 00 00 32 00 00 00 10 00 00 00 FC DD 86 67 00 00 00 00 0C FB 06 00 00 00 00 00 53 55 50 4C 41 ]
22:58:46.020 -> Send: [53 55 50 4C 41 17 6E 00 00 00 28 00 00 00 10 00 00 00 F5 0C 00 00 00 00 00 00 D3 C4 08 00 00 00 00 00 ]
22:58:46.020 -> Send: [53 55 50 4C 41 ]
22:58:46.116 -> Recv: [53 55 50 4C 41 17 6E 00 00 00 32 00 00 00 10 00 00 00 15 DE 86 67 00 00 00 00 C3 42 07 00 00 00 00 00 53 55 50 4C 41 ]
22:59:11.079 -> Send: [53 55 50 4C 41 17 6F 00 00 00 28 00 00 00 10 00 00 00 0E 0D 00 00 00 00 00 00 A0 CA 09 00 00 00 00 00 ]
22:59:11.079 -> Send: [53 55 50 4C 41 ]
22:59:11.208 -> Recv: [53 55 50 4C 41 17 6F 00 00 00 32 00 00 00 10 00 00 00 2E DE 86 67 00 00 00 00 F5 46 08 00 00 00 00 00 53 55 50 4C 41 ]
22:59:28.928 -> [3360850][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x2000) callback
22:59:28.928 -> [3360851][V][ZigbeeHandlers.cpp:72] zb_attribute_reporting_handler(): Received report from address(0x1cc) src endpoint(1) to dst endpoint(1) cluster(0x0)
22:59:28.928 -> [3360852][I][ZigbeeGateway.cpp:339] zbAttributeRead(): zbAttributeRead from (0x4fa8), endpoint (1), cluster (0x0), attribute id (0x1), attribute data type (0x20) 
22:59:36.154 -> Send: [53 55 50 4C 41 17 70 00 00 00 28 00 00 00 10 00 00 00 27 0D 00 00 00 00 00 00 B8 E3 0A 00 00 00 00 00 ]
22:59:36.154 -> Send: [53 55 50 4C 41 ]
22:59:36.250 -> Recv: [53 55 50 4C 41 17 70 00 00 00 32 00 00 00 10 00 00 00 47 DE 86 67 00 00 00 00 2A 75 09 00 00 00 00 00 53 55 50 4C 41 ]
23:00:01.222 -> Send: [53 55 50 4C 41 17 71 00 00 00 28 00 00 00 10 00 00 00 40 0D 00 00 00 00 00 00 A0 E1 0B 00 00 00 00 00 ]
23:00:01.222 -> Send: [53 55 50 4C 41 ]
23:00:01.318 -> Recv: [53 55 50 4C 41 17 71 00 00 00 32 00 00 00 10 00 00 00 60 DE 86 67 00 00 00 00 9C CD 0A 00 00 00 00 00 53 55 50 4C 41 ]
23:00:09.773 -> [3401684][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x2000) callback
23:00:09.773 -> [3401684][V][ZigbeeHandlers.cpp:72] zb_attribute_reporting_handler(): Received report from address(0x1cc) src endpoint(1) to dst endpoint(1) cluster(0x702)
23:00:09.773 -> [3401685][I][ZigbeeGateway.cpp:338] zbAttributeRead(): zbAttributeRead electrical measurement cluster (0x702), attribute id (0x0), attribute data type (0x25)
23:00:26.292 -> Send: [53 55 50 4C 41 17 72 00 00 00 28 00 00 00 10 00 00 00 59 0D 00 00 00 00 00 00 02 F7 0C 00 00 00 00 00 ]
23:00:26.292 -> Send: [53 55 50 4C 41 ]
23:00:26.388 -> Recv: [53 55 50 4C 41 17 72 00 00 00 32 00 00 00 10 00 00 00 79 DE 86 67 00 00 00 00 32 28 0C 00 00 00 00 00 53 55 50 4C 41 ]
23:00:51.368 -> Send: [53 55 50 4C 41 17 73 00 00 00 28 00 00 00 10 00 00 00 72 0D 00 00 00 00 00 00 DB F4 0D 00 00 00 00 00 ]
23:00:51.368 -> Send: [53 55 50 4C 41 ]
23:00:51.465 -> Recv: [53 55 50 4C 41 17 73 00 00 00 32 00 00 00 10 00 00 00 92 DE 86 67 00 00 00 00 9C 76 0C 00 00 00 00 00 53 55 50 4C 41 ]
23:01:16.438 -> Send: [53 55 50 4C 41 17 74 00 00 00 28 00 00 00 10 00 00 00 8B 0D 00 00 00 00 00 00 33 0A 0F 00 00 00 00 00 ]
23:01:16.438 -> Send: [53 55 50 4C 41 ]
23:01:16.537 -> Recv: [53 55 50 4C 41 17 74 00 00 00 32 00 00 00 10 00 00 00 AB DE 86 67 00 00 00 00 96 8D 0D 00 00 00 00 00 53 55 50 4C 41 ]
23:01:41.515 -> Send: [53 55 50 4C 41 17 75 00 00 00 28 00 00 00 10 00 00 00 A5 0D 00 00 00 00 00 00 C2 CD 00 00 00 00 00 00 ]
23:01:41.515 -> Send: [53 55 50 4C 41 ]
23:01:41.612 -> Recv: [53 55 50 4C 41 17 75 00 00 00 32 00 00 00 10 00 00 00 C4 DE 86 67 00 00 00 00 60 A0 0E 00 00 00 00 00 53 55 50 4C 41 ]
23:02:06.581 -> Send: [53 55 50 4C 41 17 76 00 00 00 28 00 00 00 10 00 00 00 BE 0D 00 00 00 00 00 00 3C DF 01 00 00 00 00 00 ]
23:02:06.581 -> Send: [53 55 50 4C 41 ]
23:02:06.680 -> Recv: [53 55 50 4C 41 17 76 00 00 00 32 00 00 00 10 00 00 00 DE DE 86 67 00 00 00 00 79 B6 00 00 00 00 00 00 53 55 50 4C 41 ]
23:02:31.623 -> Send: [53 55 50 4C 41 17 77 00 00 00 28 00 00 00 10 00 00 00 D7 0D 00 00 00 00 00 00 F0 E0 02 00 00 00 00 00 ]
23:02:31.623 -> Send: [53 55 50 4C 41 ]
23:02:31.752 -> Recv: [53 55 50 4C 41 17 77 00 00 00 32 00 00 00 10 00 00 00 F7 DE 86 67 00 00 00 00 35 10 02 00 00 00 00 00 53 55 50 4C 41 ]
23:02:56.717 -> Send: [53 55 50 4C 41 17 78 00 00 00 28 00 00 00 10 00 00 00 F0 0D 00 00 00 00 00 00 5B F2 03 00 00 00 00 00 ]
23:02:56.717 -> Send: [53 55 50 4C 41 ]
23:02:56.815 -> Recv: [53 55 50 4C 41 17 78 00 00 00 32 00 00 00 10 00 00 00 10 DF 86 67 00 00 00 00 07 76 02 00 00 00 00 00 53 55 50 4C 41 ]
23:03:21.777 -> Send: [53 55 50 4C 41 17 79 00 00 00 28 00 00 00 10 00 00 00 09 0E 00 00 00 00 00 00 1B F8 04 00 00 00 00 00 ]
23:03:21.777 -> Send: [53 55 50 4C 41 ]
23:03:21.874 -> Recv: [53 55 50 4C 41 17 79 00 00 00 32 00 00 00 10 00 00 00 29 DF 86 67 00 00 00 00 28 7D 03 00 00 00 00 00 53 55 50 4C 41 ]
23:03:46.858 -> Send: [53 55 50 4C 41 17 7A 00 00 00 28 00 00 00 10 00 00 00 22 0E 00 00 00 00 00 00 D9 15 06 00 00 00 00 00 ]
23:03:46.858 -> Send: [53 55 50 4C 41 ]
23:03:46.956 -> Recv: [53 55 50 4C 41 17 7A 00 00 00 32 00 00 00 10 00 00 00 42 DF 86 67 00 00 00 00 69 A0 04 00 00 00 00 00 53 55 50 4C 41 ]
23:04:11.914 -> Send: [53 55 50 4C 41 17 7B 00 00 00 28 00 00 00 10 00 00 00 3B 0E 00 00 00 00 00 00 EA 1E 07 00 00 00 00 00 ]
23:04:11.914 -> Send: [53 55 50 4C 41 ]
23:04:12.179 -> Recv: [53 55 50 4C 41 17 7B 00 00 00 32 00 00 00 10 00 00 00 5B DF 86 67 00 00 00 00 9E E1 05 00 00 00 00 00 53 55 50 4C 41 ]
23:04:36.991 -> Send: [53 55 50 4C 41 17 7C 00 00 00 28 00 00 00 10 00 00 00 54 0E 00 00 00 00 00 00 69 30 08 00 00 00 00 00 ]
23:04:36.991 -> Send: [53 55 50 4C 41 ]
23:04:37.377 -> Recv: [53 55 50 4C 41 17 7C 00 00 00 32 00 00 00 10 00 00 00 74 DF 86 67 00 00 00 00 63 3A 07 00 00 00 00 00 53 55 50 4C 41 ]
23:05:02.047 -> Send: [53 55 50 4C 41 17 7D 00 00 00 28 00 00 00 10 00 00 00 6D 0E 00 00 00 00 00 00 53 32 09 00 00 00 00 00 ]
23:05:02.047 -> Send: [53 55 50 4C 41 ]
23:05:02.149 -> Recv: [53 55 50 4C 41 17 7D 00 00 00 32 00 00 00 10 00 00 00 8D DF 86 67 00 00 00 00 ED 94 08 00 00 00 00 00 53 55 50 4C 41 ]
23:05:18.463 -> [3710395][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x2000) callback
23:05:18.463 -> [3710395][V][ZigbeeHandlers.cpp:72] zb_attribute_reporting_handler(): Received report from address(0x1cc) src endpoint(1) to dst endpoint(1) cluster(0x0)
23:05:18.463 -> [3710396][I][ZigbeeGateway.cpp:339] zbAttributeRead(): zbAttributeRead from (0x4fa8), endpoint (1), cluster (0x0), attribute id (0x1), attribute data type (0x20) 
23:05:27.120 -> Send: [53 55 50 4C 41 17 7E 00 00 00 28 00 00 00 10 00 00 00 86 0E 00 00 00 00 00 00 25 57 0A 00 00 00 00 00 ]
23:05:27.120 -> Send: [53 55 50 4C 41 ]
23:05:27.216 -> Recv: [53 55 50 4C 41 17 7E 00 00 00 32 00 00 00 10 00 00 00 A6 DF 86 67 00 00 00 00 E4 E5 08 00 00 00 00 00 53 55 50 4C 41 ]
23:05:52.196 -> Send: [53 55 50 4C 41 17 7F 00 00 00 28 00 00 00 10 00 00 00 9F 0E 00 00 00 00 00 00 DC 58 0B 00 00 00 00 00 ]
23:05:52.196 -> Send: [53 55 50 4C 41 ]
Cały czas gniazdko jest włączone (z podpiętym laptopem - zasilaczem 65W).
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

To wrzucę i ja moje logi takiego termometru: https://a.aliexpress.com/_EvH4NG8

Code: Select all

  ============ After Setup End =============
                                                         [  1416][I][ZigbeeCore.                                                                                        cpp:330] esp_zb_app_signal_handler(): Network(0xe6bb) is open for 180 seconds
[ 31807][V][ZigbeeCore.cpp:343] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 31809][V][ZigbeeCore.cpp:343] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[ 32329][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xcd99)
[ 32329][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x80
[ 32445][D][ZigbeeGateway.cpp:128] find_Cb(): Sensor found: short address(0xcd99), endpoint(1)
[ 32456][I][ZigbeeGateway.cpp:271] printJoinedDevices(): joined devices:
[ 32456][I][ZigbeeGateway.cpp:274] printJoinedDevices(): Device on endpoint 1, short address: 0xcd99
[ 32561][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 32562][V][ZigbeeHandlers.cpp:94] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xcd99) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 32563][V][ZigbeeHandlers.cpp:103] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[ 32563][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_rcuyhwe3"
[ 32457][I][Z2S_Device_Scanner.ino:88] loop(): manufacturer _TZ3000_rcuyhwe3
[ 32681][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 32682][V][ZigbeeHandlers.cpp:94] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xcd99) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 32682][V][ZigbeeHandlers.cpp:103] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[ 32683][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS0203"
[ 32565][I][Z2S_Device_Scanner.ino:89] loop(): model TS0203
[ 32684][I][ZigbeeGateway.cpp:207] zbPrintDeviceDiscovery(): short_addr_req 52633
[ 32800][I][ZigbeeGateway.cpp:141] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 52633, endpoints count 1
[ 32800][I][ZigbeeGateway.cpp:144] Z2S_active_ep_req_cb(): Endpont # 1, id 1
[ 32835][I][ZigbeeGateway.cpp:160] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 52633, endpoint # 1
[ 32836][I][ZigbeeGateway.cpp:161] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 4, out clusters # 8
[ 32837][I][ZigbeeGateway.cpp:165] Z2S_simple_desc_req_cb(): In cluster # 1, id 1
[ 32837][I][ZigbeeGateway.cpp:165] Z2S_simple_desc_req_cb(): In cluster # 2, id 3
[ 32838][I][ZigbeeGateway.cpp:165] Z2S_simple_desc_req_cb(): In cluster # 3, id 1280
[ 32838][I][ZigbeeGateway.cpp:165] Z2S_simple_desc_req_cb(): In cluster # 4, id 0
[ 32838][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 1, id 3
[ 32839][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 2, id 4
[ 32839][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 3, id 5
[ 32840][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 4, id 6
[ 32840][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 5, id 8
[ 32840][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 6, id 4096
[ 32841][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 7, id 25
[ 32841][I][ZigbeeGateway.cpp:180] Z2S_simple_desc_req_cb(): Out cluster # 8, id 10
[ 32958][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 32959][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x1), attribute id (0x0), data type (0x21)
[ 32959][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x1), attribute id (0x20), data type (0x20)
[ 32960][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x1), attribute id (0x21), data type (0x20)
[ 32961][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x1), attribute id (0xfffd), data type (0x21)
[ 32975][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 32989][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 32990][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x500), attribute id (0x0), data type (0x30)
[ 32991][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x500), attribute id (0x1), data type (0x31)
[ 32991][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x500), attribute id (0x2), data type (0x19)
[ 32992][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x500), attribute id (0x10), data type (0xf0)
[ 32993][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x500), attribute id (0x11), data type (0x20)
[ 32994][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x500), attribute id (0xfffd), data type (0x21)
[ 33010][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33010][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x0), data type (0x20)
[ 33011][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x1), data type (0x20)
[ 33012][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x2), data type (0x20)
[ 33013][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x3), data type (0x20)
[ 33014][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x4), data type (0x42)
[ 33014][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x5), data type (0x42)
[ 33015][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x6), data type (0x42)
[ 33016][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0x7), data type (0x30)
[ 33017][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0xffde), data type (0x20)
[ 33018][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0xfffd), data type (0x21)
[ 33019][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0xfffe), data type (0x30)
[ 33020][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0xffe2), data type (0x20)
[ 33021][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x0), attribute id (0xffe3), data type (0x48)
[ 33034][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33048][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33049][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x4), attribute id (0x0), data type (0x18)
[ 33049][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x4), attribute id (0xfffd), data type (0x21)
[ 33064][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33064][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x5), attribute id (0x0), data type (0x20)
[ 33065][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x5), attribute id (0x1), data type (0x20)
[ 33066][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x5), attribute id (0x2), data type (0x21)
[ 33067][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x5), attribute id (0x3), data type (0x10)
[ 33068][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x5), attribute id (0x4), data type (0x18)
[ 33068][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x5), attribute id (0xfffd), data type (0x21)
[ 33083][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33083][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x6), attribute id (0x0), data type (0x10)
[ 33084][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x6), attribute id (0xfffd), data type (0x21)
[ 33098][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33099][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x8), attribute id (0x0), data type (0x20)
[ 33099][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x8), attribute id (0xfffd), data type (0x21)
[ 33113][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33128][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33128][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x0), data type (0xf0)
[ 33129][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x1), data type (0x23)
[ 33130][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x2), data type (0x23)
[ 33131][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x3), data type (0x21)
[ 33131][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x4), data type (0x23)
[ 33132][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x5), data type (0x21)
[ 33133][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x6), data type (0x30)
[ 33134][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x7), data type (0x21)
[ 33135][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x8), data type (0x21)
[ 33136][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0x9), data type (0x21)
[ 33137][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0x19), attribute id (0xfffd), data type (0x21)
[ 33140][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 33140][I][ZigbeeGateway.cpp:357] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0xcd99), source endpoint (0x1), source cluster (0xa), attribute id (0xfffd), data type (0x21)
[ 33751][V][ZigbeeCore.cpp:343] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[ 33832][I][ZigbeeCore.cpp:330] esp_zb_app_signal_handler(): Network(0xe6bb) is open for 180 seconds
[ 36879][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1031) callback
[ 36879][V][ZigbeeHandlers.cpp:167] zb_cmd_ias_zone_status_change_handler(): IAS Zone Status Notification: from address(0xcd99) src endpoint(1) to dst endpoint(1) cluster(0x500), zone status (0x0), extended status (0x0), zone id (0x0), delay (0x0)
[ 44842][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1031) callback
[ 44842][V][ZigbeeHandlers.cpp:167] zb_cmd_ias_zone_status_change_handler(): IAS Zone Status Notification: from address(0xcd99) src endpoint(1) to dst endpoint(1) cluster(0x500), zone status (0x1), extended status (0x0), zone id (0x0), delay (0x0)
[ 50368][I][ZigbeeHandlers.cpp:21] zb_action_handler(): Receive Zigbee action(0x1031) callback
[ 50369][V][ZigbeeHandlers.cpp:167] zb_cmd_ias_zone_status_change_handler(): IAS Zone Status Notification: from address(0xcd99) src endpoint(1) to dst endpoint(1) cluster(0x500), zone status (0x0), extended status (0x0), zone id (0x0), delay (0x0)
Resetting Zigbee to factory settings, reboot.
                                             [ 62911][V][ZigbeeCore.cpp:348] factoryReset(): Factory resetting Zigbee stack, device will reboot
ESP-ROM:esp32c6-20220919
Build:Sep 19 2022
rst:0xc (SW_CPU),boot:0x1e (SPI_FAST_FLASH_BOOT)
Saved PC:0x4001975a
SPIWP:0xee
mode:DIO, clock div:2
load:0x4086c410,len:0xcf8
load:0x4086e610,len:0x2e30
load:0x40875728,len:0x113c
entry 0x4086c410
[   312][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x420074e6
[   323][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x420074aa
[   334][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4200746e
[   346][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42007432
[   357][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x420074e6
[   368][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x420074aa
[   380][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4200746e
[   391][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x42007432
[   403][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DM (38) successfully set to 0x42003dfa
[   414][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DP (39) successfully set to 0x42003dfa
[   425][V][ZigbeeEP.cpp:21] ZigbeeEP(): Endpoint: 1
[   436][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 17 successfully set to type UART_RX (2) with bus 0x4080e584
[   447][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 16 successfully set to type UART_TX (3) with bus 0x4080e584
[   458][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 12 successfully set to type USB_DM (38) with bus 0x408105e8
[   468][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 13 successfully set to type USB_DP (39) with bus 0x408105e8
1) successfully set to 0x42004d3c
[   592][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 9 successfully set to type GPIO (1) with bus 0xa
[   592][D][ZigbeeCore.cpp:85] addEndpoint(): Endpoint: 1, Device ID: 0x0050
[   593][D][ZigbeeCore.cpp:124] zigbeeInit(): Initialize Zigbee stack
[   690][D][ZigbeeCore.cpp:131] zigbeeInit(): Register all Zigbee EPs in list
[   693][I][ZigbeeCore.cpp:139] zigbeeInit(): List of registered Zigbee EPs:
[   693][I][ZigbeeCore.cpp:141] zigbeeInit(): Device type: Home Gateway, Endpoint: 1, Device ID: 0x0050
[   697][V][ZigbeeCore.cpp:343] esp_zb_app_signal_handler(): ZDO signal: ZDO Config Ready (0x17), status: ESP_FAIL
[   698][I][ZigbeeCore.cpp:220] esp_zb_app_signal_handler(): Zigbee stack initialized
[   700][I][ZigbeeCore.cpp:226] esp_zb_app_signal_handler(): Device started up in  factory-reset mode
[   700][I][ZigbeeCore.cpp:230] esp_zb_app_signal_handler(): Start network formation
[  3068][I][ZigbeeCore.cpp:332] esp_zb_app_signal_handler(): Network(0x5317) closed, devices joining not allowed.
[  3069][I][ZigbeeCore.cpp:261] esp_zb_app_signal_handler(): Formed network successfully (Extended PAN ID: 54:32:04:ff:fe:33:53:58, PAN ID: 0x5317, Channel:23, Short Address: 0x0000)
[  3537][I][ZigbeeCore.cpp:330] esp_zb_app_signal_handler(): Network(0x5317) is open for 180 seconds
[  3539][I][ZigbeeCore.cpp:276] esp_zb_app_signal_handler(): Network steering started
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

lukasz06 wrote: Tue Jan 14, 2025 11:12 pm To wrzucę i ja moje logi takiego termometru: https://a.aliexpress.com/_EvH4NG8
To nie termometr, tylko czujnik otwarcia drzwi/okna ;-)
Jest już w programie i powinien Ci się normalnie dodać i pokazać w Supli.
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
bokk
Posts: 730
Joined: Fri Mar 01, 2019 4:26 am
Has thanked: 7 times
Been thanked: 25 times

Post

A czy jest szansa ze przełącznik Sonoff ZBMINIL2 będzie współpracował prawidłowo z bramką.
https://sonoff.tech/product/diy-smart-s ... zbmini-l2/
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

Zibi_007 wrote: Wed Jan 15, 2025 12:41 am
lukasz06 wrote: Tue Jan 14, 2025 11:12 pm To wrzucę i ja moje logi takiego termometru: https://a.aliexpress.com/_EvH4NG8
To nie termometr, tylko czujnik otwarcia drzwi/okna ;-)
Jest już w programie i powinien Ci się normalnie dodać i pokazać w Supli.
Dokładnie - czujnik otwarcia okna :), ale w Cloud musiałem to sam ustawić, bo pokazało "brak" i wybrałem funkcję door/window
Termometru Xiaomi lywsd03mmc z oprogramowaniem Zigbee nie wykrył

EDIT; Zauważyłem, że po zaniku zasilania bramka owszem loguje sie, ale status czujnika jest inny ( tzn okno jest otwarte :))
Last edited by lukasz06 on Wed Jan 15, 2025 8:49 am, edited 2 times in total.
Top
andras
Posts: 636
Joined: Fri Dec 30, 2016 5:51 pm
Has thanked: 2 times
Been thanked: 4 times

Post

Zibi_007

Bin na esp32c6 N4 mini jednak nie idzie , po wgraniu sieć rozgłasza ale nie można do niej się zalogować
zrywa połączenie jakby moduł się resetował .

A to w logu

Code: Select all

ELF file SHA256: 9ebb1175f9cbc20c

Rebooting...
ESP-ROM:esp32c6-20220919
Build:Sep 19 2022
rst:0xc (SW_CPU),boot:0xc (SPI_FAST_FLASH_BOOT)
Saved PC:0x4001975a
SPIWP:0xee
mode:DIO, clock div:2
load:0x4086c410,len:0xcf8
load:0x4086e610,len:0x2e30
load:0x40875728,len:0x113c
entry 0x4086c410
[   705][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4202df8e
[   716][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4202df52
[   728][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4202df16
[   739][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4202deda
[   750][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4202df8e
[   762][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4202df52
[   773][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4202df16
[   784][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4202deda
[   796][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DM (38) successfully set to 0x420290ca
[   807][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DP (39) successfully set to 0x420290ca
[   819][V][NetworkServer.h:41] NetworkServer(): NetworkServer::NetworkServer(port=80, ...)
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

andras wrote: Wed Jan 15, 2025 8:26 am Zibi_007

Bin na esp32c6 N4 mini jednak nie idzie , po wgraniu sieć rozgłasza ale nie można do niej się zalogować
zrywa połączenie jakby moduł się resetował .

A to w logu

Code: Select all

ELF file SHA256: 9ebb1175f9cbc20c

Rebooting...
ESP-ROM:esp32c6-20220919
Build:Sep 19 2022
rst:0xc (SW_CPU),boot:0xc (SPI_FAST_FLASH_BOOT)
Saved PC:0x4001975a
SPIWP:0xee
mode:DIO, clock div:2
load:0x4086c410,len:0xcf8
load:0x4086e610,len:0x2e30
load:0x40875728,len:0x113c
entry 0x4086c410
[   705][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4202df8e
[   716][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4202df52
[   728][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4202df16
[   739][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4202deda
[   750][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4202df8e
[   762][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4202df52
[   773][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4202df16
[   784][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4202deda
[   796][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DM (38) successfully set to 0x420290ca
[   807][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DP (39) successfully set to 0x420290ca
[   819][V][NetworkServer.h:41] NetworkServer(): NetworkServer::NetworkServer(port=80, ...)
To jedyny moduł, którego nie testowałem. Dzisiaj mi przyszedł z Chin. Sprawdzę w nocy, czy wsad wchodzi i dam znać. Jak da radę, to skompiluję specjalną wersję dla niego. Generalnie mini bym nie polecał, chyba, że dla kogoś bardzo liczy się rozmiar. C6mini ma antenę jak C3 i dla polepszenia zasięgu trzeba by było podlutować antenkę (drucik). Kupiłem tylko w celach edukacyjnych, bo różnica w cenie mini vs N4 jest symboliczna.
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

bokk wrote: Wed Jan 15, 2025 5:34 am A czy jest szansa ze przełącznik Sonoff ZBMINIL2 będzie współpracował prawidłowo z bramką.
https://sonoff.tech/product/diy-smart-s ... zbmini-l2/
Jak wrzucisz logi ze skanera, a Łukasz doda do programu, to całkiem możliwe, że zadziała. W każdym razie, jeśli pytasz, czy jest szansa, to jest. Czekamy na logi ze skanera.
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

lukasz06 wrote: Wed Jan 15, 2025 7:24 am
Zibi_007 wrote: Wed Jan 15, 2025 12:41 am
lukasz06 wrote: Tue Jan 14, 2025 11:12 pm To wrzucę i ja moje logi takiego termometru: https://a.aliexpress.com/_EvH4NG8
To nie termometr, tylko czujnik otwarcia drzwi/okna ;-)
Jest już w programie i powinien Ci się normalnie dodać i pokazać w Supli.
Dokładnie - czujnik otwarcia okna :), ale w Cloud musiałem to sam ustawić, bo pokazało "brak" i wybrałem funkcję door/window
Termometru Xiaomi lywsd03mmc z oprogramowaniem Zigbee nie wykrył

EDIT; Zauważyłem, że po zaniku zasilania bramka owszem loguje sie, ale status czujnika jest inny ( tzn okno jest otwarte :))
Zawsze sam musisz ustalić co to jest. Do Supli masz dodany kanał binarny, a jego funkcję ustalasz samemu.
Po zaniku zasilania trzeba poczekać, aż czujnik zaraportuje swój stan. W zależności od ustawienia może to potrwać nawet kilka (kilkanaście) minut.
Swoją drogą (@Klew wiem, że to czytasz) przydałoby się dodać możliwość wyboru tutaj (w cloud, binarne) czujnika dymu i ruchu. W tej chwili takie urządzenia mam dodane jako alarm lub czujnik cieczy.
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Wrzuciłem update kodu - objaśnienia poniżej:

1. wszystkie definicje urządzeń przeniosłem do pliku

Code: Select all

Z2S_devices_database.h
.

Powinno to ułatwić dodawanie nowych urządzeń a jednocześnie pomogło mi zautomatyzować i uprościć kod bindowania nowych urządzeń.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top

Return to “Bramka ZigBee”