Welcome to the ioT world

[Pelikano]

Welcome to the world of iot! Till now it is very good loocking but I do not see how I can make my own devices. I am using esp8266 and other iot platforms but would like to try Supla. I am honored to be the first user.
To help Supla become populair, some more information is needed. For example, manual or sketches. Will there be an Arduino library?
best regards,
Leon

[pzygmunt]

Hi. Thank you for your interest. For beginning you can run "SUPLA WiFi Socket" on your ESP8266 module. All you nead to do is:
1. Flash firmware to the chip, it is avaiable at
https://github.com/SUPLA/ESP8266/tree/m ... t-firmware
or
https://github.com/SUPLA/ESP8266/tree/m ... are-gpio54
the different between firmware images is an GPIO PORTS definitions.

Sources: https://github.com/SUPLA/supla-core/tre ... SP8266_IOT

2. Run the device and connect it to the SUPLA server. To do this, please read user manual
https://www.supla.org/download/wifisocket-manual-en.pdf

You can also run supla device based on any raspberry pi.
To do this, just move this card image:
https://www.supla.org/download/rbpiext01.zip

on to your SD Card, and fill location settings in /boot/location.txt file
(Card size: minimum 3GB)

[pzygmunt]

Regarding to Arduino. Software will be ready until 29 feb 2016