exit status 1 multiple definition of 'enum _sensorI2C'

Hektorek · Post Fri Aug 27, 2021 12:34 pm

Proszę o pomoc - mam taki komunikat jak w temacie przy kompilacji.
źródła pobrane z gihub od Krycha88
płytka esp v.3.0

krycha88 · Post Fri Aug 27, 2021 12:44 pm

W czym to kompilujesz?

krycha88 · Post Fri Aug 27, 2021 12:52 pm

Usuń i daj znać:
https://github.com/krycha88/GUI-Generic ... nsors.h#L4

Hektorek · Post Fri Aug 27, 2021 2:11 pm

krycha88 wrote: Fri Aug 27, 2021 12:52 pm Usuń i daj znać:
https://github.com/krycha88/GUI-Generic ... nsors.h#L4

Code: Select all

#ifndef SuplaWebPageSensor_h
#define SuplaWebPageSensor_h

#include "SuplaDeviceGUI.h"
#include "SuplaWebServer.h"
#include "SuplaWebPageControl.h"

#define PATH_MULTI_DS                 "multids"
#define PATH_SAVE_MULTI_DS            "savemultids"
#define PATH_1WIRE                    "1wire"
#define PATH_SAVE_1WIRE               "save1wire"
#define PATH_I2C                      "i2c"
#define PATH_SAVE_I2C                 "savei2c"
#define PATH_SPI                      "spi"
#define PATH_SAVE_SPI                 "savespi"

#define INPUT_MULTI_DS_GPIO   "mdsg"
#define INPUT_DHT11_GPIO      "dht11"
#define INPUT_DHT22_GPIO      "dht22"
#define INPUT_SDA_GPIO        "sdag"
#define INPUT_SCL_GPIO        "sclg"
#define INPUT_BME280          "bme280"
#define INPUT_ALTITUDE_BME280 "abme280"
#define INPUT_SHT3x           "sht30"
#define INPUT_SI7021          "si7021"
#define INPUT_OLED            "oled"
#define INPUT_OLED_ANIMATION  "oleda"
#define INPUT_OLED_BRIGHTNESS "oledb"
#define INPUT_MCP23017        "mcp"
#define INPUT_SI7021_SONOFF   "si7021sonoff"
#define INPUT_MAX_DHT11       "mdht11"
#define INPUT_MAX_DHT22       "mdht22"
#define INPUT_MAX_DS18B20     "maxds"
#define INPUT_CLK_GPIO        "clk"
#define INPUT_CS_GPIO         "cs"
#define INPUT_D0_GPIO         "d0"
#define INPUT_MAX6675         "max6675"
#define INPUT_OLED_NAME       "ion"





/* enum _sensorI2C
{
  SENSOR_I2C_BME280,
  SENSOR_I2C_SHT3x,
  SENSOR_I2C_SI7021,
  SENSOR_I2C_MAX6675,
  SENSOR_I2C_OLED,
  SENSOR_I2C_MCP23017
};





#ifdef SUPLA_BME280
enum _bmeAdress
{
  BME280_ADDRESS_0X76 = 1,
  BME280_ADDRESS_0X77,
  BME280_ADDRESS_0X76_AND_0X77
};
#endif



#ifdef SUPLA_SHT3x
enum _shtAdress
{
  SHT3x_ADDRESS_0X44 = 1,
  SHT3x_ADDRESS_0X45,
  SHT3x_ADDRESS_0X44_AND_0X45
};
#endif

*/


class SuplaWebPageSensor {
 public:
  SuplaWebPageSensor();
  void createWebPageSensor();

#ifdef SUPLA_DS18B20
#define INPUT_DS18B20_ADDR "dsaddr"
#define INPUT_DS18B20_NAME "dsname"

  void handleSearchDS();
  void handleDSSave();
  void showDS18B20(bool readonly = false);
  void supla_webpage_search(int save);
#endif

#if defined(SUPLA_BME280) || defined(SUPLA_SI7021) || defined(SUPLA_SHT3x) || defined(SUPLA_OLED) || defined(SUPLA_MCP23017)
  void handlei2c();
  void handlei2cSave();
  void supla_webpage_i2c(int save);
#endif

#if defined(SUPLA_MAX6675)
  void handleSpi();
  void handleSpiSave();
#endif

#if defined(SUPLA_DS18B20) || defined(SUPLA_DHT11) || defined(SUPLA_DHT22) || defined(SUPLA_SI7021_SONOFF)
  void handle1Wire();
  void handle1WireSave();
  void supla_webpage_1wire(int save);
#endif

#if defined(SUPLA_MAX6675)
  void supla_webpage_spi(int save);
#endif
};

extern SuplaWebPageSensor* WebPageSensor;
#endif  // SuplaWebPageSensor_h

Po zakomentowaniu kompilacja zatrzymuje się z komunikatem:
"exit status 1
'KEY_ALTITUDE_BME280' was not declared in this scope; did you mean 'KEY_ALTITUDE_BMX280'?"

a kompiluje w arduino v 1.8.13

krycha88 · Post Fri Aug 27, 2021 6:05 pm

Pobierz nowe źródła i nic nie zmieniaj. Powinno wszystko się kompilować - przed chwilą sprawdziłem. W preferencjach Arduino Ide mam ustawione Ostrzeżenia kompilatora: Domyślne.

Patryk · Post Fri Aug 27, 2021 7:15 pm

@Hektorek
A masz bibliotekę:
SuplaDeviceExtensions

Hektorek · Post Fri Aug 27, 2021 7:21 pm

krycha88 wrote: Fri Aug 27, 2021 6:05 pm Pobierz nowe źródła i nic nie zmieniaj. Powinno wszystko się kompilować - przed chwilą sprawdziłem. W preferencjach Arduino Ide mam ustawione Ostrzeżenia kompilatora: Domyślne.

Uaktualniłem biblioteki i płytkę Generic ESP8266 do v. 3.0.2 i tym razem błąd:

exit status 1
'MDNS' was not declared in this scope

W pliku cały przebieg kompilacji arduino

Źródła pobrane stąd:

https://github.com/krycha88/GUI-Generic

Nie wiem, co robię źle?
Czy błąd tkwi w nieprawidłowych bibliotekach?

Jeśli mam:
// #define USE_CUSTOM

to mam błąd:
exit status 1
Błąd kompilacji dla płytki Generic ESP8266 Module.

krycha88 · Post Fri Aug 27, 2021 7:30 pm

najpierw skompiluj sobie źródła z zakomentowanym
https://github.com/krycha88/GUI-Generic ... onfig.h#L4
jak się skompilują to odkomentuj
https://github.com/krycha88/GUI-Generic ... onfig.h#L4
oraz flagi poniżej które ciebie nie interesują

a jak dalej nie pójdzie to użyj:
https://gui-generic-builder.supla.io/
który aktualnie coś nie działa

Hektorek · Post Fri Aug 27, 2021 7:55 pm

krycha88 wrote: Fri Aug 27, 2021 7:30 pm najpierw skompiluj sobie źródła z zakomentowanym
https://github.com/krycha88/GUI-Generic ... onfig.h#L4
jak się skompilują to odkomentuj
https://github.com/krycha88/GUI-Generic ... onfig.h#L4
oraz flagi poniżej które ciebie nie interesują

a jak dalej nie pójdzie to użyj:
https://gui-generic-builder.supla.io/
który aktualnie coś nie działa

Wróciłem do wersji płytki 2.7.4 i dla próby skompilowałem SOLAREDGE.ino od lukfud-a i poszło.
To wziąłem na tapetę GUI-Generic https://github.com/krycha88/GUI-Generic ... onfig.h#L4 i błąd:
exit status 1
Błąd kompilacji dla płytki Generic ESP8266 Module.

Code: Select all

C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp: In constructor 'SuplaConfigManager::SuplaConfigManager()':
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:166:7: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
   if (SPIFFS.begin()) {
       ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:362:5: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
     SPIFFS.format();
     ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp: In member function 'int SuplaConfigManager::sizeFile()':
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:458:7: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
   if (SPIFFS.begin()) {
       ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:459:9: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
     if (SPIFFS.exists(CONFIG_FILE_PATH)) {
         ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:460:25: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
       File configFile = SPIFFS.open(CONFIG_FILE_PATH, "r");
                         ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp: In member function 'uint8_t SuplaConfigManager::load(uint8_t, bool)':
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:468:7: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
   if (SPIFFS.begin()) {
       ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:469:9: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
     if (SPIFFS.exists(CONFIG_FILE_PATH)) {
         ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:470:25: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
       File configFile = SPIFFS.open(CONFIG_FILE_PATH, "r");
                         ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp: In member function 'uint8_t SuplaConfigManager::save()':
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:523:7: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
   if (SPIFFS.begin()) {
       ^
C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaConfigManager.cpp:532:23: warning: 'SPIFFS' is deprecated (declared at C:\Users\S�awek\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4\cores\esp8266/FS.h:269): SPIFFS has been deprecated. Please consider moving to LittleFS or other filesystems. [-Wdeprecated-declarations]
     File configFile = SPIFFS.open(CONFIG_FILE_PATH, "w+");
                       ^
In file included from C:\Users\SAWEK~1\AppData\Local\Temp\arduino_build_158472\sketch\SuplaDeviceGUI.cpp:18:0:
C:\Users\S�awek\Desktop\SUPLA\przyklady\libraries\SuplaDeviceExtensions\src/supla/network/SuplaGuiWiFi.h: In member function 'virtual void Supla::GUIESPWifi::setup()':
C:\Users\S�awek\Desktop\SUPLA\przyklady\libraries\SuplaDeviceExtensions\src/supla/network/SuplaGuiWiFi.h:114:14: error: 'class ESP8266WiFiClass' has no member named 'setHostname'
         WiFi.setHostname(hostname);
              ^

ps
Nie raz kompilowałem szkice ale z GUI mam problemy i nie mogę ich rozwiązać mimo Twojej pomocy Krycha88.
Normalnie mi głupio

krycha88 · Post Fri Aug 27, 2021 8:05 pm

Ja zawsze kompiluje na najnowszych płytkach. Ten błąd mówi, że nie masz dodanego #include "FS.h"