Temperatura poprzez Linki bezpośrednie

PuteR · Post Sat Jul 23, 2022 2:56 pm

Witam, chcę zrobić na Wemos D1 mini z wyświetlaczem oled urządzenie które będzie wyświetlało temperaturę z rożnych czujników.
Generuje soft wgrywam, podaje linki bezpośrednie i ... Coś jest nie tak moduł działa tylko przez chwilę po czym się zawiesza, ale gdy działa to i tak wyświetla tylko napis błąd nie widać temperatury. O co może chodzić??

krycha88 · Post Sat Jul 23, 2022 3:07 pm

Pokaż logi z urządzenia.

Patryk · Post Sat Jul 23, 2022 3:30 pm

Zerknij:
viewtopic.php?p=125815#p125815

PuteR · Post Sat Jul 23, 2022 3:31 pm

krycha88 wrote: Sat Jul 23, 2022 3:07 pm Pokaż logi z urządzenia.

Mniej więcej tak to wygląda

Code: Select all

 ets Jan  8 2013,rst cause:2, boot mode:(3,7)

load 0x4010f000, len 3460, room 16
tail 4
chksum 0xcc
load 0x3fff20b8, len 40, room 4
tail 4
chksum 0xc9
csum 0xc9
v00096410
~ld
Config read
Key: 0 Value: ▒▒wa▒▒**▒▒z▒9▒
Key: 1 Value: L▒▒▒"▒▒E▒A▒-▒g
Key: 2 Value: Supla
Key: 3 Value: xxxx-xx
Key: 4 Value: xxxx
Key: 5 Value: xxxxxx
Key: 6 Value: OLED
Key: 7 Value: 192.168.1.81
Key: 8 Value: [email protected]
Key: 9 Value: 1
Key: 10 Value: 1
Key: 11 Value: 1
Key: 12 Value: 0
Key: 13 Value:
Key: 14 Value: 0
Key: 15 Value:
Key: 16 Value:
Key: 17 Value:
Key: 18 Value:
Key: 19 Value: ,,,,2,,,,,,,,,,,
Key: 20 Value:
Key: 21 Value:
Key: 22 Value:
Key: 23 Value:
Key: 24 Value: ,,,,,,,1,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 25 Value:
Key: 26 Value:
Key: 27 Value:
Key: 28 Value:
Key: 29 Value:
Key: 30 Value:
Key: 31 Value:
Key: 32 Value:
Key: 33 Value:
Key: 34 Value:
Key: 35 Value:
Key: 36 Value: 1,10,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value:
Key: 38 Value: 1,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 39 Value:
Key: 40 Value:
Key: 41 Value:
Key: 42 Value:
Key: 43 Value: 5
Key: 44 Value: 5
Key: 45 Value:
Key: 46 Value: 0
Key: 47 Value: 0
Key: 48 Value:
Key: 49 Value:
Key: 50 Value:
Key: 51 Value:
Key: 52 Value:
Key: 53 Value:
Key: 54 Value:
Key: 55 Value:
Key: 56 Value:
Key: 57 Value:
Key: 58 Value: 1
Key: 59 Value: 0
Key: 60 Value: 20
Key: 61 Value:
Key: 62 Value: 2
Key: 63 Value: 63/hUe4zPn4XCeLtyJk/read,64/QeVq_Mc_Z2/read,,,,,,,,,,,,,,,,,,,,,,                                                                                                                                                             ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,                                                                                                                                                             ,,,,,,,,,,,,,,,
Key: 64 Value: 0
Key: 65 Value:
Key: 66 Value:
Key: 67 Value:
Key: 68 Value:
Key: 69 Value:
Key: 70 Value:
Key: 71 Value:
Key: 72 Value:
Key: 73 Value:
Key: 74 Value: 0.45
Key: 75 Value: 0.45
Key: 76 Value:
Key: 77 Value:
Key: 78 Value:
Key: 79 Value:
Key: 80 Value: 0
Key: 81 Value:
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 0 ]
Storage: Number of sections 0
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
Channel(0) value changed to -275.0
Channel(1) value changed to -275.0
Initializing network layer
WiFi: establishing connection with SSID: "Supla"
Using Supla protocol version 16
Current status: [5] SuplaDevice initialized
Current status: [8] No connection to network
local IP: 192.168.1.36
subnetMask: 255.255.255.0
gatewayIP: 192.168.1.1
Signal strength (RSSI): -65 dBm
IMPROV▒
       IMPROVhttp://192.168.1.36▒
                                 Establishing unsecured connection with: 192.168                                                                                                                                                             .1.81 (port: 2015)
Connected to Supla Server
Current status: [10] Register in progress
Device registered (activity timeout 120 s, server version: 17, server min versio                                                                                                                                                             n: 1)
Current status: [17] Registered and ready
Changing activity timeout to 30
Activity timeout set to 30 s
}
parseObject - failed
}
parseObject - failed
}
parseObject - failed
}
parseObject - failed
}
parseObject - failed

 ets Jan  8 2013,rst cause:2, boot mode:(3,6)

load 0x4010f000, len 3460, room 16
tail 4
chksum 0xcc
load 0x3fff20b8, len 40, room 4
tail 4
chksum 0xc9
csum 0xc9
v00096410
~ld
Config read
Key: 0 Value: ▒▒wa▒▒**▒▒z▒9▒
Key: 1 Value: L▒▒▒"▒▒E▒A▒-▒g
Key: 2 Value:xxx
Key: 3 Value: xxxx
Key: 4 Value: adxxxx
Key: 5 Value:xxxx
Key: 6 Value: OLED
Key: 7 Value: 192.168.1.81
Key: 8 Value: [email protected]
Key: 9 Value: 1
Key: 10 Value: 1
Key: 11 Value: 1
Key: 12 Value: 0
Key: 13 Value:
Key: 14 Value: 0
Key: 15 Value:
Key: 16 Value:
Key: 17 Value:
Key: 18 Value:
Key: 19 Value: ,,,,2,,,,,,,,,,,
Key: 20 Value:
Key: 21 Value:
Key: 22 Value:
Key: 23 Value:
Key: 24 Value: ,,,,,,,1,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 25 Value:
Key: 26 Value:
Key: 27 Value:
Key: 28 Value:
Key: 29 Value:
Key: 30 Value:
Key: 31 Value:
Key: 32 Value:
Key: 33 Value:
Key: 34 Value:
Key: 35 Value:
Key: 36 Value: 1,10,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value:
Key: 38 Value: 1,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 39 Value:
Key: 40 Value:
Key: 41 Value:
Key: 42 Value:
Key: 43 Value: 5
Key: 44 Value: 5
Key: 45 Value:
Key: 46 Value: 0
Key: 47 Value: 0
Key: 48 Value:
Key: 49 Value:
Key: 50 Value:
Key: 51 Value:
Key: 52 Value:
Key: 53 Value:
Key: 54 Value:
Key: 55 Value:
Key: 56 Value:
Key: 57 Value:
Key: 58 Value: 1
Key: 59 Value: 0
Key: 60 Value: 20
Key: 61 Value:
Key: 62 Value: 2
Key: 63 Value: 63/hUe4zPn4XCeLtyJk/read,64/QeVq_Mc_Z2/read,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,                                                                                                                 ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 64 Value: 0
Key: 65 Value:
Key: 66 Value:
Key: 67 Value:
Key: 68 Value:
Key: 69 Value:
Key: 70 Value:
Key: 71 Value:
Key: 72 Value:
Key: 73 Value:
Key: 74 Value: 0.45
Key: 75 Value: 0.45
Key: 76 Value:
Key: 77 Value:
Key: 78 Value:
Key: 79 Value:
Key: 80 Value: 0
Key: 81 Value:
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 0 ]
Storage: Number of sections 0
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
Channel(0) value changed to -275.0
Channel(1) value changed to -275.0
Initializing network layer
WiFi: establishing connection with SSID: "Supla"
Using Supla protocol version 16
Current status: [5] SuplaDevice initialized
Current status: [8] No connection to network
local IP: 192.168.1.36
subnetMask: 255.255.255.0
gatewayIP: 192.168.1.1
Signal strength (RSSI): -68 dBm
IMPROV▒
       IMPROVhttp://192.168.1.36▒
                                 Establishing unsecured connection with: 192.168.1.81 (port: 2015)
Connected to Supla Server
Current status: [10] Register in progress
Device registered (activity timeout 120 s, server version: 17, server min version: 1)
Current status: [17] Registered and ready
Changing activity timeout to 30
Activity timeout set to 30 s
}
parseObject - failed

Był tutaj wykony jeden reset

krycha88 · Post Sat Jul 23, 2022 5:36 pm

To jest prywatny serwer? Wyślij mi na priv tego linka.