ok za chwilę wrzucę ale jak na złość jak się podłączyłem przestało się resetować i jest normalnie połączone ;/
Natomiast jest trochę "krzaków" w logach i nie wiem czy to normalne: ?
Code: Select all
19:58:10.007 -> M⸮QmaWiFi station disconnected
19:58:10.107 -> )⸮L
19:58:10.107 -> ⸮C\- )⸮hE5)NRP-CغN
19:58:10.107 -> )⸮⸮⸮⸮P)LO⸮ JJk⸮A⸮ ⸮⸮V⸮⸮P⸮#E)⸮⸮
19:58:10.170 -> Config read
19:58:10.170 -> Key: 0 Value: ⸮_⸮⸮3t鷆⸮⸮⸮Zν
19:58:10.170 -> Key: 1 Value: W⸮J⸮⸮⸮:⸮⸮⸮⸮⸮k⸮
19:58:10.170 -> Key: 2 Value: Endor
19:58:10.170 -> Key: 3 Value: xxxxxxxxxxxxxx
19:58:10.170 -> Key: 4 Value: admin
19:58:10.208 -> Key: 5 Value: pass
19:58:10.208 -> Key: 6 Value: Roleta sypialnia 2
19:58:10.208 -> Key: 7 Value: svr14.supla.org
19:58:10.208 -> Key: 8 Value: xxxxxxxxxxxxxxx
19:58:10.208 -> Key: 9 Value: 2
19:58:10.208 -> Key: 10 Value: 2
19:58:10.208 -> Key: 11 Value: 2
19:58:10.208 -> Key: 12 Value:
19:58:10.208 -> Key: 13 Value:
19:58:10.208 -> Key: 14 Value: 1
19:58:10.208 -> Key: 15 Value: 1
19:58:10.254 -> Key: 16 Value: 0
19:58:10.254 -> Key: 17 Value:
19:58:10.254 -> Key: 18 Value:
19:58:10.254 -> Key: 19 Value:
19:58:10.254 -> Key: 20 Value: 2
19:58:10.254 -> Key: 21 Value: 1
19:58:10.254 -> Key: 22 Value:
19:58:10.254 -> Key: 23 Value:
19:58:10.254 -> Key: 24 Value: ,,,,,,,1,,,,,,,,,,,,,,,,,,,,,,,,,,,,
19:58:10.254 -> Key: 25 Value:
19:58:10.254 -> Key: 26 Value: 0,0,0,,,2,0,,,,,,0,,,,,1,,,,,,,,,,,,
19:58:10.254 -> Key: 27 Value:
19:58:10.254 -> Key: 28 Value: 1,3,,1,,2,0,0,,,,,,,,,,,,,,,,,,,,,,,
19:58:10.254 -> Key: 29 Value: 1,1,1,0,2,2,0,,,,,,,,,,,,,,,,,,,,,,,
19:58:10.308 -> Key: 30 Value:
19:58:10.308 -> Key: 31 Value:
19:58:10.308 -> Key: 32 Value:
19:58:10.308 -> Key: 33 Value:
19:58:10.308 -> Key: 34 Value:
19:58:10.308 -> Key: 35 Value: ,2,,,,,,,,,,1,,,,,,,,
19:58:10.308 -> Key: 36 Value: 2,2,,1,,2,0,,0,,,,,,,,1,,,,,,,,,,,,,
19:58:10.308 -> Key: 37 Value: 2,1,1,,2,2,0,,,,,,,,,,,,,,,,,,,,,,,,
19:58:10.308 -> Key: 38 Value: 1,2,,0,,1,2,,,,,,,,,,1,,,,,,,,,,,,,,
19:58:10.308 -> Key: 39 Value: ,,,,,
19:58:10.308 -> Key: 40 Value: 2,3,,1,,2,0,,,,,,,,,,,,,,,,,,,,,,,,,
19:58:10.355 -> Key: 41 Value:
19:58:10.355 -> Key: 42 Value:
19:58:10.355 -> Key: 43 Value:
19:58:10.355 -> Key: 44 Value:
19:58:10.355 -> Key: 45 Value:
19:58:10.355 -> Key: 46 Value:
19:58:10.355 -> Key: 47 Value:
19:58:10.355 -> Key: 48 Value:
19:58:10.355 -> Key: 49 Value:
19:58:10.355 -> Key: 50 Value:
19:58:10.355 -> Key: 51 Value:
19:58:10.355 -> Key: 52 Value:
19:58:10.355 -> Key: 53 Value:
19:58:10.355 -> Key: 54 Value:
19:58:10.355 -> Key: 55 Value:
19:58:10.355 -> Key: 56 Value:
19:58:10.355 -> Key: 57 Value:
19:58:10.355 -> Key: 58 Value: 1
19:58:10.355 -> Key: 59 Value: 0
19:58:10.355 -> Key: 60 Value:
19:58:10.408 -> Key: 61 Value:
19:58:10.408 -> Key: 62 Value:
19:58:10.408 -> Key: 63 Value:
19:58:10.408 -> Key: 64 Value:
19:58:10.408 -> Key: 65 Value:
19:58:10.408 -> Key: 66 Value:
19:58:10.408 -> Key: 67 Value:
19:58:10.408 -> Key: 68 Value:
19:58:10.408 -> Key: 69 Value:
19:58:10.408 -> Key: 70 Value:
19:58:10.408 -> Key: 71 Value:
19:58:10.408 -> Key: 72 Value:
19:58:10.408 -> Key: 73 Value:
19:58:10.408 -> Key: 74 Value: 0.55
19:58:10.408 -> Key: 75 Value: 0
19:58:10.408 -> Key: 76 Value: 0,1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
19:58:10.408 -> Key: 77 Value:
19:58:10.408 -> Key: 78 Value: 0,,,,,,,,,,,,,,,,,,,,,,,,
19:58:10.408 -> Key: 79 Value:
19:58:10.408 -> Key: 80 Value: 1
19:58:10.408 -> Key: 81 Value:
19:58:10.455 -> Key: 82 Value:
19:58:10.455 -> Key: 83 Value:
19:58:10.455 -> Key: 84 Value:
19:58:10.455 -> Key: 85 Value:
19:58:10.455 -> Supla - starting initialization
19:58:10.455 -> Storage initialization
19:58:10.455 -> readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
19:58:10.455 -> Storage: Number of sections 1
19:58:10.455 -> Reading section: 0
19:58:10.455 -> readStorage: 7; Read: [3 9 0 0 0 0 0 ]
19:58:10.455 -> Section type: 3; size: 9
19:58:10.455 -> Config storage not configured
19:58:10.508 -> Validating storage state section with current device configuration
19:58:10.508 -> Storage state section validation completed. Loading elements state...
19:58:10.508 -> readStorage: 9; Read: [A8 DE 0 0 A8 DE 0 0 63 ]
19:58:10.508 -> RollerShutter[0] settings restored from storage. Opening time: 57000 ms; closing time: 57000 ms. Position: 99
19:58:10.508 -> **** Digital write[0], gpio: 5; value 0
19:58:10.508 -> **** Digital write[0], gpio: 13; value 0
19:58:10.508 -> Channel[1] setting func list: 1
19:58:10.555 -> Channel[1] setting func list: 3
19:58:10.555 -> Channel[1] setting func list: 7
19:58:10.555 -> Channel[1] setting func list: 15
19:58:10.555 -> Channel[1] setting func list: 31
19:58:10.555 -> Channel[1] setting func list: 63
19:58:10.555 -> Channel[1] setting func list: 127
19:58:10.555 -> Channel[2] setting func list: 1
19:58:10.555 -> Channel[2] setting func list: 3
19:58:10.555 -> Channel[2] setting func list: 7
19:58:10.555 -> Channel[2] setting func list: 15
19:58:10.609 -> Channel[2] setting func list: 31
19:58:10.609 -> Channel[2] setting func list: 63
19:58:10.609 -> Channel[2] setting func list: 127
19:58:10.609 -> Channel(3) value changed to 1
19:58:10.609 -> Channel(4) value changed to 1
19:58:10.609 -> Initializing network layer
19:58:10.609 -> Network AP/hostname: ROLETA-SYPIALNIA-2-D8BFC00D56F3
19:58:10.609 -> Enter normal mode
19:58:10.609 -> Using Supla protocol version 16
19:58:10.609 -> Current status: [5] SuplaDevice initialized
19:58:10.609 -> WiFi: establishing connection with SSID: "Endor"
19:58:10.656 -> Channel(0) value changed to 99
19:58:16.491 -> local IP: 192.168.68.144
19:58:16.491 -> subnetMask: 255.255.255.0
19:58:16.491 -> gatewayIP: 192.168.68.1
19:58:16.491 -> Signal strength (RSSI): -69 dBm
19:58:16.491 -> IMPROV⸮
19:58:16.491 -> IMPROVhttp://192.168.68.144I
19:58:16.575 -> Establishing NOT encrypted connection with: svr14.supla.org (port: 2015)
19:58:16.575 -> Connected to Supla Server
19:58:16.575 -> Current status: [10] Register in progress
19:58:19.439 -> Device registered (activity timeout 120 s, server version: 19, server min version: 1)
19:58:19.485 -> Current status: [17] Registered and ready
19:58:19.485 -> Changing activity timeout to 30
19:58:19.485 -> Activity timeout set to 30 s
19:58:19.586 -> AT[1] received config with active actions: 0x20
19:58:19.686 -> AT[2] received config with active actions: 0x20
19:58:44.400 -> RollerShutter[0] new value from server: 110
19:58:44.400 -> **** Digital write[0], gpio: 5; value 0
19:58:44.400 -> **** Digital write[0], gpio: 13; value 1
19:58:44.986 -> **** Digital write[0], gpio: 5; value 0
19:58:44.986 -> **** Digital write[0], gpio: 13; value 0
19:58:44.986 -> Channel(0) value changed to 100
19:58:49.951 -> Wrote 9 bytes to storage at 15
19:58:50.005 -> Commit
19:58:54.421 -> RollerShutter[0] new value from server: 2
19:58:54.421 -> **** Digital write[0], gpio: 13; value 0
19:58:54.421 -> **** Digital write[0], gpio: 5; value 1
19:58:54.421 -> Channel(0) value changed to 99
20:02:48.145 -> ⸮⸮1e!RollerShutter[0] new value from server: 1
20:02:48.145 -> **** Digital write[0], gpio: 5; value 0
20:02:48.145 -> **** Digital write[0], gpio: 13; value 1
20:02:48.700 -> Channel(0) value changed to 99
20:03:24.282 -> ⸮⸮1e!TRollerShutter[0] new value from
20:03:43.391 -> 5⸮K1vdAE⸮!Qs⸮R⸮a⸮A⸮a⸮RollerShutter[0] new value from server: 10
20:03:43.391 -> **** Digital write[0], gpio: 13; value 0
20:03:43.391 -> **** Digital write[0], gpio: 5; value 1
20:03:43.440 -> Channel(0) value changed to 99
20:10:41.183 -> a⸮^ujT **** Digital write[0], gpio: 13; value 0
20:10:41.183 -> **** Digital write[0], gpio: 5; value 1
20:10:41.183 -> Channel(0) value changed to 99
20:10:41.544 -> **** Digital write[0], gpio: 5;
