i cant work it

[odin56]

hi. i was trying test supla and doing exatly same like manual but still not work... i have a rasperry pi 3b and android phone. Look a pictures:
have any ideas? what i was doing wrong?

[pzygmunt]

Hi. Current sd card image doesn't support raspberry pi 3. You have to install supla software manually. Please type few commands at console:

cd
git clone https://github.com/SUPLA/raspberry
rm raspberry/ext01/boot/config.txt
sudo cp -r raspberry/ext01/* /
sudo update-rc.d supla-dev defaults
sudo nano /boot/location.txt
sudo /etc/init.d/supla-dev start

[odin56]

I installed noobs linux and open console and adding lines and it download supla directorys. So what i need to do next?

[pzygmunt]

Yes, you should use dedicated image of SD Card contained Linux. Then you can install supla software manually.

[odin56]

Command line say "supla start ok" but still my phone does not regonize it... so could you please do manual for noobs or video.

[pzygmunt]

Please check last state

cat /boot/last_state.txt

[odin56]

it say "registered and ready"

[pzygmunt]

It looks like the device is connected to the server.
Please login at cloud.supla.org and check if devices status is "CONNECTED".
Probably you should select channel functions at cloud.supla.org.

[odin56]

Yes. Now i got it online, Thanks man.

[pzygmunt]

Your welcome