supla-device na Linux

[klew]

Ale właściwych jednostek (W, kW, kWh) nie uzyskam?

Uzyskasz. W airly jest przykład jak pobierać dane z json, a w readme jest opisane jak konfigurować licznik elektryczny. Trzeba połączyć te dwa opisy

[kris.gie]

No właśnie próbowałem ugryźć ElectricityMeterParsed, bez efektu. Skoro mówisz że da się, to muszę to ogarnąć

[klew]

No właśnie próbowałem ugryźć ElectricityMeterParsed, bez efektu. Skoro mówisz że da się, to muszę to ogarnąć

Tutaj jest przykład użycia ElectricityMeterParsed ze źródłem typu json, ale dla prostej struktury jsona (jeden poziom, bez zagnieżdżeń):
https://github.com/SUPLA/supla-device/b ... ain=1#L311

Tutaj na przykładzie "airly" jest pokazane jak używać "json pointer", aby dobrać się do pola o bardziej złożonej strukturze:
https://github.com/SUPLA/supla-device/b ... e.yaml#L24

Tutaj w readme opisałem najbardziej podstawowe funkcje tego "json pointer":
https://github.com/SUPLA/supla-device/b ... ain=1#L516

Jeśli coś nie będzie działać, to najpierw ustaw logi na verbose i zobacz co się w logach pojawia. Zawsze możesz też wstawić na forum te rzeczy, to pomogę. Tylko daj przykładowy plik json, plik konfiguracyjny yaml (oczywiście bez maila, adresów serwerów itp) oraz załącz log z konsoli.

[kris.gie]

Nie ugryzłem tego jednak. Tak wygląda json bez zagnieżdżeń:

Code: Select all

{"inverters":[{"serial":"116173707423","name":"1","data_age":15,"reachable":true,"producing":true,"limit_relative":100,"limit_absolute":1500,"AC":{"0":{"Power":{"v":910.4000244,"u":"W","d":1},"Voltage":{"v":238.3999939,"u":"V","d":1},"Current":{"v":3.819999933,"u":"A","d":2},"Power DC":{"v":958.2999268,"u":"W","d":1},"YieldDay":{"v":2677,"u":"Wh","d":0},"YieldTotal":{"v":1630.845947,"u":"kWh","d":3},"Frequency":{"v":50,"u":"Hz","d":2},"PowerFactor":{"v":1,"u":"","d":3},"ReactivePower":{"v":22.79999924,"u":"var","d":1},"Efficiency":{"v":95.00157166,"u":"%","d":3}}},"DC":{"0":{"name":{"u":""},"Power":{"v":241.1999969,"u":"W","d":1},"Voltage":{"v":41.5,"u":"V","d":1},"Current":{"v":5.820000172,"u":"A","d":2},"YieldDay":{"v":654,"u":"Wh","d":0},"YieldTotal":{"v":405.2160034,"u":"kWh","d":3}},"1":{"name":{"u":""},"Power":{"v":238.8999939,"u":"W","d":1},"Voltage":{"v":41.5,"u":"V","d":1},"Current":{"v":5.760000229,"u":"A","d":2},"YieldDay":{"v":683,"u":"Wh","d":0},"YieldTotal":{"v":411.7680054,"u":"kWh","d":3}},"2":{"name":{"u":""},"Power":{"v":240.6000061,"u":"W","d":1},"Voltage":{"v":41.29999924,"u":"V","d":1},"Current":{"v":5.829999924,"u":"A","d":2},"YieldDay":{"v":657,"u":"Wh","d":0},"YieldTotal":{"v":404.3179932,"u":"kWh","d":3}},"3":{"name":{"u":""},"Power":{"v":237.6000061,"u":"W","d":1},"Voltage":{"v":41.29999924,"u":"V","d":1},"Current":{"v":5.760000229,"u":"A","d":2},"YieldDay":{"v":683,"u":"Wh","d":0},"YieldTotal":{"v":409.5440063,"u":"kWh","d":3}}},"INV":{"0":{"Temperature":{"v":39.20000076,"u":"°C","d":1}}},"events":0},{"serial":"116173708896","name":"2","data_age":9,"reachable":true,"producing":true,"limit_relative":100,"limit_absolute":1500,"AC":{"0":{"Power":{"v":843.5,"u":"W","d":1},"Voltage":{"v":237.6999969,"u":"V","d":1},"Current":{"v":3.549999952,"u":"A","d":2},"Power DC":{"v":888,"u":"W","d":1},"YieldDay":{"v":2369,"u":"Wh","d":0},"YieldTotal":{"v":1507.158936,"u":"kWh","d":3},"Frequency":{"v":49.99000168,"u":"Hz","d":2},"PowerFactor":{"v":1,"u":"","d":3},"ReactivePower":{"v":22.70000076,"u":"var","d":1},"Efficiency":{"v":94.98873901,"u":"%","d":3}}},"DC":{"0":{"name":{"u":""},"Power":{"v":245.5,"u":"W","d":1},"Voltage":{"v":41.79999924,"u":"V","d":1},"Current":{"v":5.880000114,"u":"A","d":2},"YieldDay":{"v":617,"u":"Wh","d":0},"YieldTotal":{"v":416.2319946,"u":"kWh","d":3}},"1":{"name":{"u":""},"Power":{"v":239.6000061,"u":"W","d":1},"Voltage":{"v":41.79999924,"u":"V","d":1},"Current":{"v":5.739999771,"u":"A","d":2},"YieldDay":{"v":670,"u":"Wh","d":0},"YieldTotal":{"v":412.8049927,"u":"kWh","d":3}},"2":{"name":{"u":""},"Power":{"v":230.5,"u":"W","d":1},"Voltage":{"v":38.5,"u":"V","d":1},"Current":{"v":5.989999771,"u":"A","d":2},"YieldDay":{"v":587,"u":"Wh","d":0},"YieldTotal":{"v":387.1740112,"u":"kWh","d":3}},"3":{"name":{"u":""},"Power":{"v":172.3999939,"u":"W","d":1},"Voltage":{"v":38.5,"u":"V","d":1},"Current":{"v":4.489999771,"u":"A","d":2},"YieldDay":{"v":495,"u":"Wh","d":0},"YieldTotal":{"v":290.947998,"u":"kWh","d":3}}},"INV":{"0":{"Temperature":{"v":35.29999924,"u":"°C","d":1}}},"events":15}],"total":{"Power":{"v":1753.900024,"u":"W","d":1},"YieldDay":{"v":5046,"u":"Wh","d":0},"YieldTotal":{"v":3138.004883,"u":"kWh","d":2}},"hints":{"time_sync":false,"radio_problem":false,"default_password":false}}

Yaml:

Code: Select all

# Example supla-device config file for Linux device
# https://github.com/SUPLA/supla-device

name: supla-device
#log_level: debug
log_level: verbose
state_files_path: "/var/lib/supla-device"
security_level: 2 # disable certyficate verification

supla:
  server: svrX.supla.org
  mail: 

channels:

  - type: ThermometerParsed # Temperatura Raspberry
    name: Temperatura Raspberry
    temperature: 0
    multiplier: 1
    parser:
      type: Simple
      refresh_time_ms: 5000
    source:
      name: s1
      type: File
      file: /home/pi/supla-filesensors/raspi-temp.txt
      expiration_time_sec: 900

  - type: ThermometerParsed # karta Raspberry
    name: karta Raspberry
    temperature: 0
    multiplier: 1
    parser:
      type: Simple
      refresh_time_ms: 5000
    source:
      name: s1
      type: File
      file: /home/pi/supla-filesensors/storage.txt
      expiration_time_sec: 900

  - type: ThermHygroMeterParsed
    name: kuchnia
    source:
      type: File
  # use file "temp_humi.txt" from current folder
      file: "/home/pi/MiTemperature2/.txt"
    parser:
      type: Simple
      refresh_time_ms: 5000
  # temperature is read from first line of txt file
    temperature: 0
  # humidity is read from second line of txt file
    humidity: 1
    multiplier_temp: 1
    multiplier_humi: 1
    battery_level: 2

  - type: ThermHygroMeterParsed
    name: łazienka
    source:
      type: File
  # use file "temp_humi.txt" from current folder
      file: "/home/pi/MiTemperature2/.txt"
    parser:
      type: Simple
      refresh_time_ms: 5000
  # temperature is read from first line of txt file
    temperature: 0
  # humidity is read from second line of txt file
    humidity: 1
    multiplier_temp: 1
    multiplier_humi: 1
    battery_level: 2

  - type: ThermHygroMeterParsed
    name: salon
    source:
      type: File
  # use file "temp_humi.txt" from current folder
      file: "/home/pi/MiTemperature2/.txt"
    parser:
      type: Simple
      refresh_time_ms: 5000
  # temperature is read from first line of txt file
    temperature: 0
  # humidity is read from second line of txt file
    humidity: 1
    multiplier_temp: 1
    multiplier_humi: 1
    battery_level: 2

  - type: ThermHygroMeterParsed
    name: sypialnia
    source:
      type: File
  # use file "temp_humi.txt" from current folder
      file: "/home/pi/MiTemperature2/.txt"
    parser:
      type: Simple
      refresh_time_ms: 5000
  # temperature is read from first line of txt file
    temperature: 0
  # humidity is read from second line of txt file
    humidity: 1
    multiplier_temp: 1
    multiplier_humi: 1
    battery_level: 2

  - type: ThermHygroMeterParsed
    name: przedpokój
    source:
      type: File
  # use file "temp_humi.txt" from current folder
      file: "/home/pi/MiTemperature2/.txt"
    parser:
      type: Simple
      refresh_time_ms: 5000
  # temperature is read from first line of txt file
    temperature: 0
  # humidity is read from second line of txt file
    humidity: 1
    multiplier_temp: 1
    multiplier_humi: 1
    battery_level: 2

  - type: ElectricityMeterParsed # hoymiles
    parser:
      type: Json
    source:
      type: File
      file: "/home/pi/supla-filesensors/hoymiles.json"
    phase_1:
      - voltage: x.inverters[0].AC.0.Voltage.v
      - rvr_act_energy: x.total.YieldTotal.v
        multiplier: 1000
      - rvr_power_active: x.total.Power.v
        multiplier: 1000

Z konsoli wychodzi to:

Code: Select all

VERBOSE[1677757005.877745] Source: {"inverters":[{"serial":"116173707423","name":"1","data_age":1,"reachable":true,"producing":false,"limit_relative":100,"limit_absolute":1500,"AC":{"0":{"Power":{"v":0,"u":"W","d":1},"Voltage":{"v":0,"u":"V","d":1},"Current":{"v":0,"u":"A","d":2},"Power DC":{"v":0,"u":"W","d":1},"YieldDay":{"v":0,"u":"Wh","d":0},"YieldTotal":{"v":0,"u":"kWh","d":3},"Frequency":{"v":0,"u":"Hz","d":2},"PowerFactor":{"v":0,"u":"","d":3},"ReactivePower":{"v":0,"u":"var","d":1},"Efficiency":{"v":0,"u":"%","d":3}}},"DC":{"0":{"name":{"u":""},"Power":{"v":0,"u":"W","d":1},"Voltage":{"v":2886.399902,"u":"V","d":1},"Current":{"v":0,"u":"A","d":2},"YieldDay":{"v":0,"u":"Wh","d":0},"YieldTotal":{"v":0,"u":"kWh","d":3}},"1":{"name":{"u":""},"Power":{"v":0,"u":"W","d":1},"Voltage":{"v":2886.399902,"u":"V","d":1},"Current":{"v":0,"u":"A","d":2},"YieldDay":{"v":0,"u":"Wh","d":0},"YieldTotal":{"v":0,"u":"kWh","d":3}},"2":{"name":{"u":""},"Power":{"v":0,"u":"W","d":1},"Voltage":{"v":0,"u":"V","d":1},"Current":{"v":0,"u":"A","d":2},"YieldDay":{"v":0,"u":"Wh","d":0},"YieldTotal":{"v":0,"u":"kWh","d":3}},"3":{"name":{"u":""},"Power":{"v":0,"u":"W","d":1},"Voltage":{"v":0,"u":"V","d":1},"Current":{"v":0,"u":"A","d":2},"YieldDay":{"v":0,"u":"Wh","d":0},"YieldTotal":{"v":0,"u":"kWh","d":3}}},"INV":{"0":{"Temperature":{"v":0,"u":"°C","d":1}}},"events":0},{"serial":"116173708896","name":"2","data_age":8,"reachable":true,"producing":true,"limit_relative":100,"limit_absolute":1500,"AC":{"0":{"Power":{"v":859.4000244,"u":"W","d":1},"Voltage":{"v":237.6999969,"u":"V","d":1},"Current":{"v":3.619999886,"u":"A","d":2},"Power DC":{"v":904.6999512,"u":"W","d":1},"YieldDay":{"v":2541,"u":"Wh","d":0},"YieldTotal":{"v":1507.330933,"u":"kWh","d":3},"Frequency":{"v":50,"u":"Hz","d":2},"PowerFactor":{"v":1,"u":"","d":3},"ReactivePower":{"v":22.70000076,"u":"var","d":1},"Efficiency":{"v":94.99282074,"u":"%","d":3}}},"DC":{"0":{"name":{"u":""},"Power":{"v":250,"u":"W","d":1},"Voltage":{"v":41.5,"u":"V","d":1},"Current":{"v":6.03000021,"u":"A","d":2},"YieldDay":{"v":665,"u":"Wh","d":0},"YieldTotal":{"v":416.2799988,"u":"kWh","d":3}},"1":{"name":{"u":""},"Power":{"v":244,"u":"W","d":1},"Voltage":{"v":41.5,"u":"V","d":1},"Current":{"v":5.889999866,"u":"A","d":2},"YieldDay":{"v":716,"u":"Wh","d":0},"YieldTotal":{"v":412.8510132,"u":"kWh","d":3}},"2":{"name":{"u":""},"Power":{"v":235.6000061,"u":"W","d":1},"Voltage":{"v":38.29999924,"u":"V","d":1},"Current":{"v":6.159999847,"u":"A","d":2},"YieldDay":{"v":632,"u":"Wh","d":0},"YieldTotal":{"v":387.2189941,"u":"kWh","d":3}},"3":{"name":{"u":""},"Power":{"v":175.1000061,"u":"W","d":1},"Voltage":{"v":38.29999924,"u":"V","d":1},"Current":{"v":4.579999924,"u":"A","d":2},"YieldDay":{"v":528,"u":"Wh","d":0},"YieldTotal":{"v":290.9809875,"u":"kWh","d":3}}},"INV":{"0":{"Temperature":{"v":36.59999847,"u":"°C","d":1}}},"events":15}],"total":{"Power":{"v":859.4000244,"u":"W","d":1},"YieldDay":{"v":2541,"u":"Wh","d":0},"YieldTotal":{"v":1507.330933,"u":"kWh","d":2}},"hints":{"time_sync":false,"radio_problem":false,"default_password":false}}

ERR[1677757005.880620] JSON key "x.total.YieldTotal.v" not found
ERR[1677757005.880723] JSON key "x.total.Power.v" not found
ERR[1677757005.880817] JSON key "x.inverters[0].AC.0.Voltage.v" not found
DEBUG[1677757006.235284] Send: [53 55 50 4C 41 10 0A 00 00 00 28 00 00 00 10 00 00 00 4E 8A 00 64 00 00 00 00 D2 96 03 00 00 00 00 00 ]
DEBUG[1677757006.235567] Send: [53 55 50 4C 41 ]
DEBUG[1677757006.317455] Recv: [53 55 50 4C 41 10 03 00 00 00 32 00 00 00 10 00 00 00 4E 8A 00 64 00 00 00 00 3A 80 04 00 00 00 00 00 53 55 50 4C 41 ]

Licznik się dodaje do clouda, ale nic nie pokazuje

[klew]

Nie ugryzłem tego jednak. Tak wygląda json bez zagnieżdżeń:

To jest json z "zagnieżdżeniami"

Code: Select all

ERR[1677757005.880620] JSON key "x.total.YieldTotal.v" not found
ERR[1677757005.880723] JSON key "x.total.Power.v" not found
ERR[1677757005.880817] JSON key "x.inverters[0].AC.0.Voltage.v" not found

Licznik się dodaje do clouda, ale nic nie pokazuje

Przepraszam, pomieszałem "json path" z "json pointer"
Także tamten link do "path finder" jest błędny.

U Ciebie napięcie jest pod:

Code: Select all

voltage: "/inverters/0/AC/0/Voltage/v"

I analogicznie dla pozostałych parametrów.

[kris.gie]

Nie ugryzłem tego jednak. Tak wygląda json bez zagnieżdżeń:

To jest json z "zagnieżdżeniami"

Ja jestem cienki w tym temacie . Zaczęło coś pokazywać, dzięki!!!. Ale:
Napięcie OK
Energia czynna zwrócona OK
Moc czynna z minusem, bez informacji zwrócona, czy tak ma być?

[klew]

Nie ugryzłem tego jednak. Tak wygląda json bez zagnieżdżeń:

To jest json z "zagnieżdżeniami"

Ja jestem cienki w tym temacie . Zaczęło coś pokazywać, dzięki!!!. Ale:
Napięcie OK
Energia czynna zwrócona OK
Moc czynna z minusem, bez informacji zwrócona, czy tak ma być?

To zależy od tego jakie dane są w json i jak je chcesz prezentować.

Ja u siebie falownik pokazuję na plusie i jako energią pobraną.
Tutaj niestety ani "pobrana", ani "zwrócona" nie pasuje .

[kris.gie]

Wszystko jasne, bardzo dziękuję za pomoc!!!

[shimano73]

Takie pytanie , mam zainstalowany supla-device for linux na moim wyse i działa super, on zbiera dane ze stacji pogodowej .
Przedwczoraj dane przestały się pokazywać w aplikacji. Sprawdziłem aktualne dane i pliki z których korzysta supla-device były aktualne , Supla-device też działała bo mam ustawiony skrypt {{not state(wyse).connected}} co 10 min daje powiadomienie a nie dawał . Zresetowałem terminal i zaczęło działać poprawnie, dane pojawiły się w aplikacji,
Jak sprawdzić następnym razem w czym problem, które logi sprawdzić. Zauważyłem to że nie działa dopiero gdy przestały się przymykać rolety gdy jest zbyt gorąco na zewnątrz a warunki są powiązane ze stacja pogodową.

[klew]

Takie pytanie , mam zainstalowany supla-device for linux na moim wyse i działa super, on zbiera dane ze stacji pogodowej .
Przedwczoraj dane przestały się pokazywać w aplikacji. Sprawdziłem aktualne dane i pliki z których korzysta supla-device były aktualne , Supla-device też działała bo mam ustawiony skrypt {{not state(wyse).connected}} co 10 min daje powiadomienie a nie dawał . Zresetowałem terminal i zaczęło działać poprawnie, dane pojawiły się w aplikacji,
Jak sprawdzić następnym razem w czym problem, które logi sprawdzić. Zauważyłem to że nie działa dopiero gdy przestały się przymykać rolety gdy jest zbyt gorąco na zewnątrz a warunki są powiązane ze stacja pogodową.

Zerknij do /var/log/syslog (lub jakiejś starszej kopii tego pliku).Poszukaj logów z supla-device. Powinieneś tam widzieć gdzieś start aplikacji po tym resecie. Następnie poszukaj kilku ostatnich logów sprzed tego startu.

Jak będzie niewiele, to możesz zmienić poziom logowania ustawiając

Code: Select all

log_level: debug

np. pod "name" urządzenie w yaml - to włączy dodatkowe logi i gdyby coś się ponownie stało, to będzie jakiś ślad.