GUI-Generic GG v7.9.6 Problem z zapisywaniem ustawień przekaźników, czujników i resetowanie ESP w ustawieniach DS18B20

krycha88
Posts: 5575
Joined: Fri Nov 16, 2018 7:25 am
Been thanked: 5 times

Post

Tak ruszyło, musisz podać wymagane dane czyli email i serwer.
https://gui-generic-builder.supla.io/
Top
tomzi
Posts: 46
Joined: Fri May 19, 2023 6:12 am

Post

krycha88 wrote: Wed Jan 10, 2024 8:20 pm Tak ruszyło, musisz podać wymagane dane czyli email i serwer.
Wysłałem PW
Top
tomzi
Posts: 46
Joined: Fri May 19, 2023 6:12 am

Post

krycha88 wrote: Wed Jan 10, 2024 8:20 pm Tak ruszyło, musisz podać wymagane dane czyli email i serwer.
Widzę że odbijam się od ściany...

Zauważyłem że jest pojawiła się nowa wersja GG (7.9.11)
Wygenerowałem soft przez Chrome, wgrałem przez chrome i dalej zachowuje się tak samo.
Urządzenie dodaje się do chmury ale cały czas jest jak by w trybie konfiguracji - bardzo szybko miga dioda, wystawia swoje WiFi Supla-GUI-Generic-xxxxxx ale nie da się z tym połączyć muszę tak czy inaczej wprowadzić je w tryb konfiguracji 10x przycisk albo przez cloud'a

serwer, email, login i hasło do urządzenia zapisuje się poprawnie, reszta konfiguracji nie. Nawet nazwa urządzenia się nie zapisuje.
Po ponownym wgraniu starego softu 7.4.21 wszystko jest OK

Załączam wygenerowany dzisiaj soft do NodeMCU (trzeba wypakować) - może ktoś sprawdzić czy działa "normalnie" ??
Może to kwestia serwera/chmury a nie samego GG i NodeMCU? svr91.supla.org
You do not have the required permissions to view the files attached to this post.
Top
User avatar
klew
Posts: 13908
Joined: Thu Jun 27, 2019 12:16 pm
Location: Wrocław
Has thanked: 134 times
Been thanked: 137 times

Post

Może załącz logi, z nich łatwiej coś wywnioskować.
Najlepsze suple dla Twojego domu :mrgreen:
Top
tomzi
Posts: 46
Joined: Fri May 19, 2023 6:12 am

Post

klew wrote: Fri Jan 12, 2024 3:19 pm Może załącz logi, z nich łatwiej coś wywnioskować.
Logi z NodeMCU z GG 7.9.6 informacje wrażliwe dot haseł, loginów emaili czy serwerów wyciąłem (były poprawne)
To activity timeout na końcu kręci się w pętli co 30sek i mniej więcej wtedy też dioda na 0,5sek przestaje migać i znowu dalej miga bardzo szybko jak w konfiguracji

Code: Select all

Key: 0 Value: Wş	Í)d[10]ĐE˛?ÜýOĆ[0C]
Key: 1 Value: şc4ý‰7"&ĆĹôˆ˝Š[02]=
Key: 2 Value: // Nazwa WiFi //
Key: 3 Value: // haslo do WiFi //
Key: 4 Value: // login_admina//
Key: 5 Value: // haslo_admina //
Key: 6 Value: NodeMCU ESP8266 // - nazwa urzadzenia tu zapisywałem inną ale zawsze zglasza się z tą 
Key: 7 Value: // adres serwera //
Key: 8 Value: // email //
Key: 9 Value: 0
Key: 10 Value: 0
Key: 11 Value: 
Key: 12 Value: 
Key: 13 Value: 
Key: 14 Value: 1
Key: 15 Value: 
Key: 16 Value: 
Key: 17 Value: 
Key: 18 Value: 
Key: 19 Value: 
Key: 20 Value: 1
Key: 21 Value: 0
Key: 22 Value: 
Key: 23 Value: 
Key: 24 Value: 
Key: 25 Value: 
Key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Key: 27 Value: 
Key: 28 Value: 
Key: 29 Value: 
Key: 30 Value: 
Key: 31 Value: 
Key: 32 Value: 
Key: 33 Value: 
Key: 34 Value: 
Key: 35 Value: 
Key: 36 Value: 
Key: 37 Value: 
Key: 38 Value: 
Key: 39 Value: 
Key: 40 Value: 
Key: 41 Value: 
Key: 42 Value: 
Key: 43 Value: 
Key: 44 Value: 
Key: 45 Value: 
Key: 46 Value: 
Key: 47 Value: 
Key: 48 Value: 
Key: 49 Value: 
Key: 50 Value: 
Key: 51 Value: 
Key: 52 Value: 
Key: 53 Value: 
Key: 54 Value: 
Key: 55 Value: 
Key: 56 Value: 
Key: 57 Value: 
Key: 58 Value: 1
Key: 59 Value: 1
Key: 60 Value: 
Key: 61 Value: 
Key: 62 Value: 
Key: 63 Value: 
Key: 64 Value: 0
Key: 65 Value: 
Key: 66 Value: 
Key: 67 Value: 
Key: 68 Value: 
Key: 69 Value: 
Key: 70 Value: 
Key: 71 Value: 
Key: 72 Value: 
Key: 73 Value: 
Key: 74 Value: 0.25
Key: 75 Value: 0.4
Key: 76 Value: 
Key: 77 Value: 
Key: 78 Value: 
Key: 79 Value: 
Key: 80 Value: 0
Key: 81 Value: 
Key: 82 Value: 
Key: 83 Value: 
Key: 84 Value: 
Key: 85 Value: 
Key: 86 Value: 
Key: 87 Value: 0
Key: 88 Value: 0
Key: 89 Value: 
Key: 90 Value: 
Key: 91 Value: 
Key: 92 Value: 
Key: 93 Value: 
Key: 94 Value: 
Key: 95 Value: 
Key: 96 Value: 
Key: 97 Value: 
Key: 98 Value: 
SET DEVICE CONFIGURATION!
Save key: 0 Value: Wş	Í)d[10]ĐE˛?ÜýOĆ[0C]
Save key: 1 Value: şc4ý‰7"&ĆĹôˆ˝Š[02]=
Save key: 2 Value: // nazwa WiFi//
Save key: 3 Value: // haslo do WiFi //
Save key: 4 Value: // login_admina //
Save key: 5 Value: // haslo_admina //
Save key: 6 Value: NodeMCU ESP8266 - // tu znowu "defaultowa nazwa pomimo że zapisałem inną"
Save key: 7 Value: // adres serwera //
Save key: 8 Value: // email //
Save key: 9 Value: 0
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [3 0 0 0 0 0 0 0 ]
Storage: missing Supla tag. Rewriting...
Wrote 8 bytes to storage at 0
Commit
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
GUID: // wykasowałem //
Device name: NodeMCU ESP8266
Device software version: GG v7.9.6
Initializing network layer
Network AP/hostname: NODEMCU-ESP8266-// wykasowałem //
Using Supla protocol version 21
Current status: [5] SuplaDevice initialized
Enter normal mode
WiFi: enter config mode with SSID: "SUPLA-GUI-Generic-// wykasowałem //"
WiFi: WIFI_AP_STA
Wrote 7 bytes to storage at 0
Commit
Connected BSSID: //mac//
local IP: //IP lokalne//
subnetMask: 255.255.255.0
gatewayIP: //gatewayIP//
Signal strength (RSSI): -79 dBm
Establishing NOT encrypted connection with: //adres serwera// (port: //numer portu//)
Connected to Supla Server
Initializing SRPC
LAST STATE ADDED: Register in progress
Current status: [10] Register in progress
Send: [53 55 50 4C 41 15 01 00 00 00 45 00 00 00 48 02 00 00 74 6F 6D 6D 65 6B 2E 6D 40 67 6D 61 69 6C 2E 63 6F 6D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 BA 63 34 FD 89 37 22 26 C6 C5 F4 88 BD 8A 02 3D 57 BA 09 CD 29 64 10 D0 45 B2 3F DC FD 4F C6 0C 4E 6F 64 65 4D 43 55 20 45 53 50 38 32 36 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 16 01 53 55 50 4C 41 ]
Device registered (activity timeout 120 s, server version: 22, server min version: 1)
LAST STATE ADDED: Registered and ready
Current status: [17] Registered and ready
Changing activity timeout to 30
Send: [53 55 50 4C 41 15 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
Received new device config
Sending device config result OK (1)
Send: [53 55 50 4C 41 15 03 00 00 00 B7 02 00 00 0A 00 00 00 01 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 03 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
Activity timeout set to 30 s
Send: [53 55 50 4C 41 15 04 00 00 00 28 00 00 00 10 00 00 00 20 00 00 00 00 00 00 00 37 A1 08 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 04 00 00 00 32 00 00 00 10 00 00 00 52 FE 9E 65 00 00 00 00 00 06 0D 00 00 00 00 00 53 55 50 4C 41 ]
Top
User avatar
klew
Posts: 13908
Joined: Thu Jun 27, 2019 12:16 pm
Location: Wrocław
Has thanked: 134 times
Been thanked: 137 times

Post

Nie widzę w logach aby " activity timeout" się powtarzał.
Ogólnie na pierwszy rzut oka tutaj jest wszystko ok.
Urządzenie połączyło się z serwerem i ma utrzymane połączenie.
Jeśli problem pojawia się później, to dołącz proszę dłuższe logi
Najlepsze suple dla Twojego domu :mrgreen:
Top
tomzi
Posts: 46
Joined: Fri May 19, 2023 6:12 am

Post

klew wrote: Fri Jan 12, 2024 3:52 pm Nie widzę w logach aby " activity timeout" się powtarzał.
Ogólnie na pierwszy rzut oka tutaj jest wszystko ok.
Urządzenie połączyło się z serwerem i ma utrzymane połączenie.
Jeśli problem pojawia się później, to dołącz proszę dłuższe logi
Tzn z tym activity timeout to poprostu sekwenca się po tym powtarza co 30sek - samo zapis w log "Activity timeout set to 30" nie występuje więciej

Logów mam 5:

1 - czysty NodeMCU po zaprogramowaniu softem wygenerowanym z GG Builder'a w Chrome i przez Chrome zaprogramowanego
2 - Zapis ustawień WiFi (SSID, hasło) ustawień serwera (adres, email) oraz nazwy urzadzenia "MojaNowaNazwaUrzadzenia" i loginu i hasła użykownika
3 - po resecie po zapisaniu powyższego (punkt 2) - Tu urządzenie zgłasza się z nazwą defaultową "NodeMCU ESP8266"a nie "MojaNowaNazwaUrzadzenia" i z tą defaultowa rejestruje się w chmurze i ta nazwa już zostaje na zawsze
4 - Zapis ustawień przekaźników (3 przekaźniki D5 D6 D7 - tylko ilość i GPIO reszta bez zmian)
5 - Reset po zapisaniu ustawień przekaźników (punkt 4)



1 - czysty NodeMCU po zaprogramowaniu softem wygenerowanym z GG Builder'a w Chrome i przez Chrome zaprogramowanego

Code: Select all

rl[00]lr[02]$[12]ân[0C][0C][0C]Ä[0C]lÇ[0C]b|Ž[02][07][12]’r[12]bÄ[0C]b[04]ňnn[02]lnn[12]b[0C]b[1C]pě$b[0E]lrlpňn0[02][0C][0C][0C]l[0C]Ś[02][0C][0C][0C]b[0C]nânÇ[0C]Ś[0C][04]bÄňnn'lŚ[04]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]bl’`[02]pňn[10][02][0C][0C]rŚ[1C][1C]b[0C][04][02][0C]b[0C]nân[0C][04][0C]bÄňnn'[0C][0C]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]b[04]’`[02][0E]r’’n[0C][0C]b[04]’`[02]ś[02][0C][0C]l[0C]Ś[04][0C]l`[02]ü‚n’`[02]Ś[1C][02][07][12]‚nÇ[12]rňn|ě[0C]l[0C]Ä[0C]l`[02][1C]b[12][12][02][0C]b[12]r[12][02]lânb‚n[02][0C]l`[02]Ś[1C]r[12]lÄl[12]ä[0C][0C][0C]ţConfig read
Key: 0 Value: 
Key: 1 Value: 
Key: 2 Value: 
Key: 3 Value: 
Key: 4 Value: admin
Key: 5 Value: pass
Key: 6 Value: NodeMCU ESP8266
Key: 7 Value: svrX.supla.org
Key: 8 Value: [email protected]
Key: 9 Value: 0
Key: 10 Value: 0
Key: 11 Value: 
Key: 12 Value: 
Key: 13 Value: 
Key: 14 Value: 
Key: 15 Value: 
Key: 16 Value: 
Key: 17 Value: 
Key: 18 Value: 
Key: 19 Value: 
Key: 20 Value: 1
Key: 21 Value: 0
Key: 22 Value: 
Key: 23 Value: 
Key: 24 Value: 
Key: 25 Value: 
Key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Key: 27 Value: 
Key: 28 Value: 
Key: 29 Value: 
Key: 30 Value: 
Key: 31 Value: 
Key: 32 Value: 
Key: 33 Value: 
Key: 34 Value: 
Key: 35 Value: 
Key: 36 Value: 
Key: 37 Value: 
Key: 38 Value: 
Key: 39 Value: 
Key: 40 Value: 
Key: 41 Value: 
Key: 42 Value: 
Key: 43 Value: 
Key: 44 Value: 
Key: 45 Value: 
Key: 46 Value: 
Key: 47 Value: 
Key: 48 Value: 
Key: 49 Value: 
Key: 50 Value: 
Key: 51 Value: 
Key: 52 Value: 
Key: 53 Value: 
Key: 54 Value: 
Key: 55 Value: 
Key: 56 Value: 
Key: 57 Value: 
Key: 58 Value: 1
Key: 59 Value: 1
Key: 60 Value: 
Key: 61 Value: 
Key: 62 Value: 
Key: 63 Value: 
Key: 64 Value: 0
Key: 65 Value: 
Key: 66 Value: 
Key: 67 Value: 
Key: 68 Value: 
Key: 69 Value: 
Key: 70 Value: 
Key: 71 Value: 
Key: 72 Value: 
Key: 73 Value: 
Key: 74 Value: 0.25
Key: 75 Value: 0.4
Key: 76 Value: 
Key: 77 Value: 
Key: 78 Value: 
Key: 79 Value: 
Key: 80 Value: 0
Key: 81 Value: 
Key: 82 Value: 
Key: 83 Value: 
Key: 84 Value: 
Key: 85 Value: 
Key: 86 Value: 
Key: 87 Value: 0
Key: 88 Value: 0
Key: 89 Value: 
Key: 90 Value: 
Key: 91 Value: 
Key: 92 Value: 
Key: 93 Value: 
Key: 94 Value: 
Key: 95 Value: 
Key: 96 Value: 
Key: 97 Value: 
Key: 98 Value: 
SET DEVICE CONFIGURATION!
Save key: 4 Value: admin
Save key: 5 Value: pass
Save key: 6 Value: NodeMCU ESP8266
Save key: 7 Value: svrX.supla.org
Save key: 8 Value: [email protected]
Save key: 9 Value: 0
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [3 0 0 0 0 0 0 0 ]
Storage: missing Supla tag. Rewriting...
Wrote 8 bytes to storage at 0
Commit
Config incomplete: missing Wi-Fi SSID
LAST STATE ADDED: Missing Wi-Fi SSID
Config incomplete: missing Wi-Fi password
LAST STATE ADDED: Missing Wi-Fi password
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
Config incomplete: deviceMode = CONFIG
GUID: //NumerGUID//
Device name: NodeMCU ESP8266
Device software version: GG v7.9.11
Initializing network layer
Network AP/hostname: NODEMCU-ESP8266-xxx
Using Supla protocol version 21
Current status: [5] SuplaDevice initialized
Wi-Fi SSID missing
WiFi: enter config mode with SSID: "SUPLA-GUI-Generic-xxx"
WiFi: WIFI_AP_STA
LAST STATE ADDED: Config mode
Current status: [40] Config mode
WiFi: enter config mode with SSID: "SUPLA-GUI-Generic-xxx"
WiFi: WIFI_AP_STA
Wrote 7 bytes to storage at 0
Commit
2 - Zapis ustawień WiFi (SSID, hasło) ustawień serwera (adres, email) oraz nazwy urzadzenia "MojaNowaNazwaUrzadzenia" i loginu i hasła użykownika

Code: Select all

rl[00]lr[02]$[12]ân[0C][0C][0C]Ä[0C]lÇ[0C]b|Ž[02][07][12]’r[12]bÄ[0C]b[04]ňnn[02]lnn[12]b[0C]b[1C]pě$b[0E]lrlpňn0[02][0C][0C][0C]l[0C]Ś[02][0C][0C][0C]b[0C]nânÇ[0C]Ś[0C][04]bÄňnn'lŚ[04]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]bl’`[02]pňn[10][02][0C][0C]rŚ[1C][1C]b[0C][04][02][0C]b[0C]nân[0C][04][0C]bÄňnn'[0C][0C]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]b[04]’`[02][0E]r’’n[0C][0C]b[04]’`[02]ś[02][0C][0C]l[0C]Ś[04][0C]l`[02]ü‚n’`[02]Ś[1C][02][07][12]‚nÇ[12]rňn|ě[0C]l[0C]Ä[0C]l`[02][1C]b[12][12][02][0C]b[12]r[12][02]lânb‚n[02][0C]l`[02]Ś[1C]r[12]lÄl[12]ä[0C][0C][0C]ţConfig read
Key: 0 Value: 
Key: 1 Value: 
Key: 2 Value: 
Key: 3 Value: 
Key: 4 Value: admin
Key: 5 Value: pass
Key: 6 Value: NodeMCU ESP8266
Key: 7 Value: svrX.supla.org
Key: 8 Value: [email protected]
Key: 9 Value: 0
Key: 10 Value: 0
Key: 11 Value: 
Key: 12 Value: 
Key: 13 Value: 
Key: 14 Value: 
Key: 15 Value: 
Key: 16 Value: 
Key: 17 Value: 
Key: 18 Value: 
Key: 19 Value: 
Key: 20 Value: 1
Key: 21 Value: 0
Key: 22 Value: 
Key: 23 Value: 
Key: 24 Value: 
Key: 25 Value: 
Key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Key: 27 Value: 
Key: 28 Value: 
Key: 29 Value: 
Key: 30 Value: 
Key: 31 Value: 
Key: 32 Value: 
Key: 33 Value: 
Key: 34 Value: 
Key: 35 Value: 
Key: 36 Value: 
Key: 37 Value: 
Key: 38 Value: 
Key: 39 Value: 
Key: 40 Value: 
Key: 41 Value: 
Key: 42 Value: 
Key: 43 Value: 
Key: 44 Value: 
Key: 45 Value: 
Key: 46 Value: 
Key: 47 Value: 
Key: 48 Value: 
Key: 49 Value: 
Key: 50 Value: 
Key: 51 Value: 
Key: 52 Value: 
Key: 53 Value: 
Key: 54 Value: 
Key: 55 Value: 
Key: 56 Value: 
Key: 57 Value: 
Key: 58 Value: 1
Key: 59 Value: 1
Key: 60 Value: 
Key: 61 Value: 
Key: 62 Value: 
Key: 63 Value: 
Key: 64 Value: 0
Key: 65 Value: 
Key: 66 Value: 
Key: 67 Value: 
Key: 68 Value: 
Key: 69 Value: 
Key: 70 Value: 
Key: 71 Value: 
Key: 72 Value: 
Key: 73 Value: 
Key: 74 Value: 0.25
Key: 75 Value: 0.4
Key: 76 Value: 
Key: 77 Value: 
Key: 78 Value: 
Key: 79 Value: 
Key: 80 Value: 0
Key: 81 Value: 
Key: 82 Value: 
Key: 83 Value: 
Key: 84 Value: 
Key: 85 Value: 
Key: 86 Value: 
Key: 87 Value: 0
Key: 88 Value: 0
Key: 89 Value: 
Key: 90 Value: 
Key: 91 Value: 
Key: 92 Value: 
Key: 93 Value: 
Key: 94 Value: 
Key: 95 Value: 
Key: 96 Value: 
Key: 97 Value: 
Key: 98 Value: 
SET DEVICE CONFIGURATION!
Save key: 4 Value: admin
Save key: 5 Value: pass
Save key: 6 Value: NodeMCU ESP8266
Save key: 7 Value: svrX.supla.org
Save key: 8 Value: [email protected]
Save key: 9 Value: 0
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [3 0 0 0 0 0 0 0 ]
Storage: missing Supla tag. Rewriting...
Wrote 8 bytes to storage at 0
Commit
Config incomplete: missing Wi-Fi SSID
LAST STATE ADDED: Missing Wi-Fi SSID
Config incomplete: missing Wi-Fi password
LAST STATE ADDED: Missing Wi-Fi password
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
Config incomplete: deviceMode = CONFIG
GUID: xxxx
Device name: NodeMCU ESP8266
Device software version: GG v7.9.11
Initializing network layer
Network AP/hostname: NODEMCU-ESP8266-xxx
Using Supla protocol version 21
Current status: [5] SuplaDevice initialized
Wi-Fi SSID missing
WiFi: enter config mode with SSID: "SUPLA-GUI-Generic-xxx"
WiFi: WIFI_AP_STA
LAST STATE ADDED: Config mode
Current status: [40] Config mode
WiFi: enter config mode with SSID: "SUPLA-GUI-Generic-xxx"
WiFi: WIFI_AP_STA
Wrote 7 bytes to storage at 0
Commit
Save key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Save key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Save key: 2 Value: [b]//MojaNazwaWiFi//[/b]
Save key: 3 Value: [b]MojeHasłoWiFi[/b]
Save key: 4 Value: [b]NowyLogin[/b]
Save key: 5 Value: [b]NoweHaslo[/b]
Save key: 6 Value: [b]MojaNowaNazwaUrzadzenia[/b]
Save key: 7 Value: [b]svr91.supla.org[/b]
Save key: 8 Value: [b]MojAdresEmail[/b]
Save key: 9 Value: 0
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
3 - po resecie po zapisaniu powyższego (punkt 2) - Tu urządzenie zgłasza się z nazwą defaultową "NodeMCU ESP8266"a nie "MojaNowaNazwaUrzadzenia" i z tą defaultowa rejestruje się w chmurze

Code: Select all

rl[00]ls[02]$[12]ân[0C][0C][0C]Ä[0C]lÇ[0C]b|Ž[02][07][12]’r[12]bÄ[0C]b[04]ňnn[02]lnn[12]b[0C]b[1C]pě$b[0E]lrlpňn0[02][0C][0C][0C]l[0C]Ś[02][0C][0C][0C]b[0C]nânÇ[0C]Ś[0C][04]bÄňnn'lŚ[04]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]bl’`[02]pňn[10][02][0C][0C]rŚ[1C][1C]b[0C][04][02][0C]b[0C]nân[0C][04][0C]bÄňnn'[0C][0C]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]b[04]’`[02][0E]r’’o[0C][0C]b[04]’`[02]ś[02][0C][0C]l[0C]Ś[04][0C]l`[02]ü‚n’`[02]Ś[1C][02][07][12]‚nÇ[12]rňn|ě[0C]l[0C]Ä[0C]l`[02][1C]b[12][12][02][0C]b[12]r[12][02]lânb‚n[02][0C]l`[02]Ś[1C]r[12]lÄl[12]ä[0C][0C][0C]ţConfig read
Key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Key: 2 Value: //MojaNazwaWiFi//
Key: 3 Value: //MojeHasloWiFi//
Key: 4 Value: //NowyLogin//
Key: 5 Value: //NoweHaslo//
Key: 6 Value: [b]NodeMCU ESP8266[/b]
Key: 7 Value: svr91.supla.org
Key: 8 Value: //MojAdresEmail//
Key: 9 Value: 0
Key: 10 Value: 0
Key: 11 Value: 
Key: 12 Value: 
Key: 13 Value: 
Key: 14 Value: 
Key: 15 Value: 
Key: 16 Value: 
Key: 17 Value: 
Key: 18 Value: 
Key: 19 Value: 
Key: 20 Value: 1
Key: 21 Value: 0
Key: 22 Value: 
Key: 23 Value: 
Key: 24 Value: 
Key: 25 Value: 
Key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Key: 27 Value: 
Key: 28 Value: 
Key: 29 Value: 
Key: 30 Value: 
Key: 31 Value: 
Key: 32 Value: 
Key: 33 Value: 
Key: 34 Value: 
Key: 35 Value: 
Key: 36 Value: 
Key: 37 Value: 
Key: 38 Value: 
Key: 39 Value: 
Key: 40 Value: 
Key: 41 Value: 
Key: 42 Value: 
Key: 43 Value: 
Key: 44 Value: 
Key: 45 Value: 
Key: 46 Value: 
Key: 47 Value: 
Key: 48 Value: 
Key: 49 Value: 
Key: 50 Value: 
Key: 51 Value: 
Key: 52 Value: 
Key: 53 Value: 
Key: 54 Value: 
Key: 55 Value: 
Key: 56 Value: 
Key: 57 Value: 
Key: 58 Value: 1
Key: 59 Value: 1
Key: 60 Value: 
Key: 61 Value: 
Key: 62 Value: 
Key: 63 Value: 
Key: 64 Value: 0
Key: 65 Value: 
Key: 66 Value: 
Key: 67 Value: 
Key: 68 Value: 
Key: 69 Value: 
Key: 70 Value: 
Key: 71 Value: 
Key: 72 Value: 
Key: 73 Value: 
Key: 74 Value: 0.25
Key: 75 Value: 0.4
Key: 76 Value: 
Key: 77 Value: 
Key: 78 Value: 
Key: 79 Value: 
Key: 80 Value: 0
Key: 81 Value: 
Key: 82 Value: 
Key: 83 Value: 
Key: 84 Value: 
Key: 85 Value: 
Key: 86 Value: 
Key: 87 Value: 0
Key: 88 Value: 0
Key: 89 Value: 
Key: 90 Value: 
Key: 91 Value: 
Key: 92 Value: 
Key: 93 Value: 
Key: 94 Value: 
Key: 95 Value: 
Key: 96 Value: 
Key: 97 Value: 
Key: 98 Value: 
SET DEVICE CONFIGURATION!
Save key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Save key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Save key: 2 Value: //MojaNazwaWiFi//
Save key: 3 Value: //MojeHasloWiFi//
Save key: 4 Value: //NowyLogin//
Save key: 5 Value: //NoweHaslo//
Save key: 6 Value: [b]NodeMCU ESP8266[/b]
Save key: 7 Value: svr91.supla.org
Save key: 8 Value: //MojAdresEmail"
Save key: 9 Value: 0
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [3 0 0 0 0 0 0 0 ]
Storage: missing Supla tag. Rewriting...
Wrote 8 bytes to storage at 0
Commit
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
GUID: //NumerGUID//
Device name: NodeMCU ESP8266
Device software version: GG v7.9.11
Initializing network layer
Network AP/hostname: NODEMCU-ESP8266-xxx
Using Supla protocol version 21
Current status: [5] SuplaDevice initialized
Enter normal mode
WiFi: enter config mode with SSID: "SUPLA-GUI-Generic-xxx"
WiFi: WIFI_AP_STA
Wrote 7 bytes to storage at 0
Commit
Connected BSSID: xxx
local IP: 192.168.100.217
subnetMask: 255.255.255.0
gatewayIP: 192.168.100.1
Signal strength (RSSI): -77 dBm
Establishing NOT encrypted connection with: svr91.supla.org (port: 2015)
Connected to Supla Server
Initializing SRPC
LAST STATE ADDED: Register in progress
Current status: [10] Register in progress
Send: [53 55 50 4C 41 15 01 00 00 00 45 00 00 00 48 02 00 00 74 6F 6D 6D 65 6B 2E 6D 40 67 6D 61 69 6C 2E 63 6F 6D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 33 C2 AC 7D 51 0F 81 9E 01 6F 4C 26 A5 7D 62 38 04 E4 68 22 C9 BF 9F 45 72 EA 7C 05 46 D3 5E 16 4E 6F 64 65 4D 43 55 20 45 53 50 38 32 36 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 16 01 53 55 50 4C 41 ]
Device registered (activity timeout 120 s, server version: 22, server min version: 1)
LAST STATE ADDED: Registered and ready
Current status: [17] Registered and ready
Changing activity timeout to 30
Send: [53 55 50 4C 41 15 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
Received new device config
Sending device config result OK (1)
Send: [53 55 50 4C 41 15 03 00 00 00 B7 02 00 00 0A 00 00 00 01 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 03 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
Activity timeout set to 30 s
Send: [53 55 50 4C 41 15 04 00 00 00 28 00 00 00 10 00 00 00 20 00 00 00 00 00 00 00 5F 6C 03 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 04 00 00 00 32 00 00 00 10 00 00 00 0E 91 A1 65 00 00 00 00 ED 02 07 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 15 05 00 00 00 28 00 00 00 10 00 00 00 39 00 00 00 00 00 00 00 48 93 03 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 05 00 00 00 32 00 00 00 10 00 00 00 27 91 A1 65 00 00 00 00 0E 07 08 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 15 06 00 00 00 28 00 00 00 10 00 00 00 52 00 00 00 00 00 00 00 53 AF 03 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 06 00 00 00 32 00 00 00 10 00 00 00 40 91 A1 65 00 00 00 00 A9 E5 07 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 15 07 00 00 00 28 00 00 00 10 00 00 00 6B 00 00 00 00 00 00 00 20 E8 03 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 07 00 00 00 32 00 00 00 10 00 00 00 59 91 A1 65 00 00 00 00 85 35 08 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 15 08 00 00 00 28 00 00 00 10 00 00 00 84 00 00 00 00 00 00 00 42 15 04 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 08 00 00 00 32 00 00 00 10 00 00 00 72 91 A1 65 00 00 00 00 7D 58 08 00 00 00 00 00 53 55 50 4C 41 ]
4 - Zapis ustawień przekaźników (3 przekaźniki D5 D6 D7 - tylko ilość i GPIO reszta bez zmian)

Code: Select all

Save key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Save key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Save key: 2 Value: //MojaNazwaWiFi//
Save key: 3 Value: //MojeHasloWiFi//
Save key: 4 Value: //NowyLogin//
Save key: 5 Value: //NoweHaslo//
Save key: 6 Value: [b]NodeMCU ESP8266[/b]
Save key: 7 Value: svr91.supla.org
Save key: 8 Value: //MojAdresEmail//
Save key: 9 Value: 3
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
Send: [53 55 50 4C 41 15 05 00 00 00 28 00 00 00 10 00 00 00 3A 00 00 00 00 00 00 00 C4 93 01 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 05 00 00 00 32 00 00 00 10 00 00 00 5D 92 A1 65 00 00 00 00 3A AD 0D 00 00 00 00 00 53 55 50 4C 41 ]
Save key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Save key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Save key: 2 Value: //MojaNazwaWiFi//
Save key: 3 Value: //MojeHasloWiFi//
Save key: 4 Value: //NowyLogin//
Save key: 5 Value: //NoweHaslo//
Save key: 6 Value: [b]NodeMCU ESP8266[/b] - cały czas nazwa defaultowa a nie ta którą zapisałem
Save key: 7 Value: svr91.supla.org
Save key: 8 Value: //MojAdresEmail//
Save key: 9 Value: 3
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 36 Value: 2,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Save key: 37 Value: 3,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Save key: 38 Value: 1,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
Send: [53 55 50 4C 41 15 06 00 00 00 28 00 00 00 10 00 00 00 53 00 00 00 00 00 00 00 26 BA 01 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 06 00 00 00 32 00 00 00 10 00 00 00 76 92 A1 65 00 00 00 00 6D A7 0D 00 00 00 00 00 53 55 50 4C 41 ]

5 - Reset po zapisaniu ustawień przekaźników (punkt 4)

Code: Select all

rl[00]lr[02]$[12]ân[0C][0C][0C]Ä[0C]lÇ[0C]b|Ž[02][07][12]’r[12]bÄ[0C]b[04]ňnn[02]lnn2b[0C]b[1C]pŚ$b[0E]lrlpňn‚[02][0C][0C][0C]l[0C]Ś[02][0C][0C][0C]b[0C]nânÇ[0C]Ś[0C][04]bÄňnn'lŚ[04]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]bl’`[02]pňn‚[02][0C][0C]rŚ[1C][1C]b[0C][04][02][0C]b[0C]nân[0C][04][0C]bÄňnn'[0C][0C]l`[02][12][12]nn[0C]l`[02][0E][02]nrŽ’’n[0C][0C]b[04]’`[02][0E]r’’n[0C][0C]b[04]’`[02]ś[02][0C][0C]l[0C]Ś[04][0C]l`[02]ü‚n’`[02]Ś[1C][02][07][12]‚nÇ[12]rňn|ě[0C]l[0C]Ä[0C]l`[02][1C]b[12][12][02][0C]b[12]r[12][02]lânb‚n[02][0C]l`[02]Ś[1C]r[12]lÄl[12]ä[0C][0C][0C]ţConfig read
Key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Key: 2 Value: //MojaNazwaWiFi//
Key: 3 Value: //MojeHasloWiFi//
Key: 4 Value: //NowyLogin
Key: 5 Value: //NoweHaslo
Key: 6 Value: [b]NodeMCU ESP8266[/b] nazwa cały czas defaultowa
Key: 7 Value: svr91.supla.org
Key: 8 Value: //MojAdresEmail//
Key: 9 Value: 3
Key: 10 Value: 0
Key: 11 Value: 
Key: 12 Value: 
Key: 13 Value: 
Key: 14 Value: 
Key: 15 Value: 
Key: 16 Value: 
Key: 17 Value: 
Key: 18 Value: 
Key: 19 Value: 
Key: 20 Value: 1
Key: 21 Value: 0
Key: 22 Value: 
Key: 23 Value: 
Key: 24 Value: 
Key: 25 Value: 
Key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Key: 27 Value: 
Key: 28 Value: 
Key: 29 Value: 
Key: 30 Value: 
Key: 31 Value: 
Key: 32 Value: 
Key: 33 Value: 
Key: 34 Value: 
Key: 35 Value: 
Key: 36 Value: 2,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value: 3,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 38 Value: 1,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 39 Value: 
Key: 40 Value: 
Key: 41 Value: 
Key: 42 Value: 
Key: 43 Value: 
Key: 44 Value: 
Key: 45 Value: 
Key: 46 Value: 
Key: 47 Value: 
Key: 48 Value: 
Key: 49 Value: 
Key: 50 Value: 
Key: 51 Value: 
Key: 52 Value: 
Key: 53 Value: 
Key: 54 Value: 
Key: 55 Value: 
Key: 56 Value: 
Key: 57 Value: 
Key: 58 Value: 1
Key: 59 Value: 1
Key: 60 Value: 
Key: 61 Value: 
Key: 62 Value: 
Key: 63 Value: 
Key: 64 Value: 0
Key: 65 Value: 
Key: 66 Value: 
Key: 67 Value: 
Key: 68 Value: 
Key: 69 Value: 
Key: 70 Value: 
Key: 71 Value: 
Key: 72 Value: 
Key: 73 Value: 
Key: 74 Value: 0.25
Key: 75 Value: 0.4
Key: 76 Value: 
Key: 77 Value: 
Key: 78 Value: 
Key: 79 Value: 
Key: 80 Value: 0
Key: 81 Value: 
Key: 82 Value: 
Key: 83 Value: 
Key: 84 Value: 
Key: 85 Value: 
Key: 86 Value: 
Key: 87 Value: 0
Key: 88 Value: 0
Key: 89 Value: 
Key: 90 Value: 
Key: 91 Value: 
Key: 92 Value: 
Key: 93 Value: 
Key: 94 Value: 
Key: 95 Value: 
Key: 96 Value: 
Key: 97 Value: 
Key: 98 Value: 
SET DEVICE CONFIGURATION!
Save key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Save key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Save key: 2 Value: //MojaNazwaWiFi//
Save key: 3 Value: //MojeHasloWiFi//
Save key: 4 Value: //NowyLogin//
Save key: 5 Value: //NoweHaslo//
Save key: 6 Value: [b]NodeMCU ESP8266[/b] - cały czas defaultowa nazwa
Save key: 7 Value: svr91.supla.org
Save key: 8 Value: //MojAdresEmail//
Save key: 9 Value: 0
Save key: 10 Value: 0
Save key: 20 Value: 1
Save key: 21 Value: 0
Save key: 26 Value: ,,0,,,,,,,,,,,,,,,1,,,,,,,,,,,,,,,,,
Save key: 58 Value: 1
Save key: 59 Value: 1
Save key: 74 Value: 0.25
Save key: 75 Value: 0.4
Save key: 88 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [3 0 0 0 0 0 0 0 ]
Storage: missing Supla tag. Rewriting...
Wrote 8 bytes to storage at 0
Commit
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
GUID: //NumerGUID//
Device name: NodeMCU ESP8266
Device software version: GG v7.9.11
Initializing network layer
Network AP/hostname: NODEMCU-ESP8266-xxx
Using Supla protocol version 21
Current status: [5] SuplaDevice initialized
Enter normal mode
WiFi: enter config mode with SSID: "SUPLA-GUI-Generic-xxx"
WiFi: WIFI_AP_STA
Wrote 7 bytes to storage at 0
Commit
Connected BSSID: xxx
local IP: 192.168.100.217
subnetMask: 255.255.255.0
gatewayIP: 192.168.100.1
Signal strength (RSSI): -73 dBm
Establishing NOT encrypted connection with: svr91.supla.org (port: 2015)
Connected to Supla Server
Initializing SRPC
LAST STATE ADDED: Register in progress
Current status: [10] Register in progress
Send: [53 55 50 4C 41 15 01 00 00 00 45 00 00 00 48 02 00 00 74 6F 6D 6D 65 6B 2E 6D 40 67 6D 61 69 6C 2E 63 6F 6D 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 33 C2 AC 7D 51 0F 81 9E 01 6F 4C 26 A5 7D 62 38 04 E4 68 22 C9 BF 9F 45 72 EA 7C 05 46 D3 5E 16 4E 6F 64 65 4D 43 55 20 45 53 50 38 32 36 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 16 01 53 55 50 4C 41 ]
Device registered (activity timeout 120 s, server version: 22, server min version: 1)
LAST STATE ADDED: Registered and ready
Current status: [17] Registered and ready
Changing activity timeout to 30
Send: [53 55 50 4C 41 15 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
Received new device config
Sending device config result OK (1)
Send: [53 55 50 4C 41 15 03 00 00 00 B7 02 00 00 0A 00 00 00 01 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 03 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
Activity timeout set to 30 s
Send: [53 55 50 4C 41 15 04 00 00 00 28 00 00 00 10 00 00 00 21 00 00 00 00 00 00 00 30 92 05 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 04 00 00 00 32 00 00 00 10 00 00 00 C5 92 A1 65 00 00 00 00 97 02 07 00 00 00 00 00 53 55 50 4C 41 ]
Top
User avatar
klew
Posts: 13908
Joined: Thu Jun 27, 2019 12:16 pm
Location: Wrocław
Has thanked: 134 times
Been thanked: 137 times

Post

tomzi wrote: Fri Jan 12, 2024 7:55 pm Tzn z tym activity timeout to poprostu sekwenca się po tym powtarza co 30sek - samo zapis w log "Activity timeout set to 30" nie występuje więciej
Ta wiadomość widoczna co 30 s, to ping do serwera na poziomie protokołu Supli. To normalna wiadomość, która pojawia się cyklicznie.

Z tym brakiem zapisu, to krycha88 musiałby rzucić okiem.
Najlepsze suple dla Twojego domu :mrgreen:
Top
tomzi
Posts: 46
Joined: Fri May 19, 2023 6:12 am

Post

klew wrote: Fri Jan 12, 2024 9:00 pm
tomzi wrote: Fri Jan 12, 2024 7:55 pm Tzn z tym activity timeout to poprostu sekwenca się po tym powtarza co 30sek - samo zapis w log "Activity timeout set to 30" nie występuje więciej
Ta wiadomość widoczna co 30 s, to ping do serwera na poziomie protokołu Supli. To normalna wiadomość, która pojawia się cyklicznie.

Z tym brakiem zapisu, to krycha88 musiałby rzucić okiem.
Tak tak domyśliłem się że to cykliczna komunikacja z serwerem.

Dodatkowo jak wygeneruje soft z 1Wire DS18B20 i ustawię np. 4 x DS18B20 to przy próbie wejścia w ustawienia "multiDS18B20" wszystko się wykrzacza - i przeglądarka pokazuje komunikat "Przerwano połączenie" - niestety nie mam tego zlogowanego
Top
krycha88
Posts: 5575
Joined: Fri Nov 16, 2018 7:25 am
Been thanked: 5 times

Post

Code: Select all

Save key: 0 Value: [04]äh"ÉżźErę|[05]FÓ^[16]
Save key: 1 Value: 3¬}Q[0F]ž[01]oL&Ą}b8
Save key: 2 Value: [b]//MojaNazwaWiFi//[/b]
Save key: 3 Value: [b]MojeHasłoWiFi[/b]
Save key: 4 Value: [b]NowyLogin[/b]
Save key: 5 Value: [b]NoweHaslo[/b]
Save key: 6 Value: [b]MojaNowaNazwaUrzadzenia[/b]
Save key: 7 Value: [b]svr91.supla.org[/b]
Save key: 8 Value: [b]MojAdresEmail[/b]
Jak możesz nie podmieniaj tych danych bo nie dokońca wiadomo co podmieniłeś a co zapisuje się do konfiga. Z tych logów wynika, że do konfiga zapisują się jakieś głupoty ... Spróbuj zmienić przeglądarkę?
https://gui-generic-builder.supla.io/
Top

Return to “GUI Generic”