Mega 2560 + SUplaDEvice = sterowanie oświetleniem w salonie

[email protected]
Posts: 23
Joined: Thu Feb 03, 2022 9:36 pm

Post

Zibi_007 wrote: Mon Dec 30, 2024 2:15 pm Na próbę wygeneruj soft z GG (z tego co widzę powinno dać się wyklikać wszystkie funkcjonalności) i sprawdź czy działa.
GG działa z esp 32, 8266 i 8255 mega2560 ma mikrokontroler amtega
Top
User avatar
YoMan
Posts: 3522
Joined: Thu Apr 30, 2020 5:18 pm
Location: Częstochowa
Has thanked: 3 times
Been thanked: 3 times

Post

[email protected] wrote: Mon Dec 30, 2024 2:00 pm
klew wrote: Mon Dec 30, 2024 1:51 pm
[email protected] wrote: Mon Dec 30, 2024 1:03 pm Mega działa lokalnie bez LANU. Mogę sterować z przycisków. Nie ma samo załączeń.
Po podpięciu do lanu i wykryciu w Cloudzie zaczyna się, wszystkie przekaźniki załączają się i wyłączają tak w pętli. (nawet jak w cloudzie nie ma wybranej żadnej funkcji)
Pokaż logi z urządzenia :P

Code: Select all

Connecting to network...
DHCP connection result: 1
localIP: 10.0.0.127
subnetMask: 255.255.255.0
gatewayIP: 10.0.0.1
dnsServerIP: 10.0.0.1
Establishing NOT encrypted connection with: svrx.supla.org (port: 2015)
Connected to Supla Server
Initializing SRPC (proto: 23)
Current status: [10] Register in progress
CH[0], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [00 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[1], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [01 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[2], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [02 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[3], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [03 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[4], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [04 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[5], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [05 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[6], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [06 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[7], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [07 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1A 01 53 55 50 4C 41 ]
Device registered (activity timeout 120 s, server version: 26, server min version: 1)
Current status: [17] Registered and ready
Changing activity timeout to 30 s
Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
Send: [53 55 50 4C 41 ]
Relay[0]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 0
Send: [53 55 50 4C 41 ]
Relay[1]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 1
Send: [53 55 50 4C 41 ]
Relay[2]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 2
Send: [53 55 50 4C 41 ]
Relay[3]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 3
Send: [53 55 50 4C 41 ]
Relay[4]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 4
Send: [53 55 50 4C 41 ]
Relay[5]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 5
Send: [53 55 50 4C 41 ]
Relay[6]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 6
Send: [53 55 50 4C 41 ]
Relay[7]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 7
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 17 03 00 00 00 AA 02 00 00 ]
Receiv�Button[8]::setMulticlickTime: 200
Supla - starting initialization (pButton[0] pressed
Relay[0] toggle (duration 0 ms)
Relay[0] turn ON (duration 0 ms)
 **** Digital write[0], gpio: 26; value 0
Channel(0) value changed to 1
Button[1] pressed
Relay[1] toggle (duration 0 ms)
Relay[1] turn ON (duration 0 ms)
 **** Digital write[1], gpio: 27; value 0
Channel(1) value changed to 1
Button[2] pressed
Relay[2] toggle (duration 0 ms)
Relay[2] turn ON (duration 0 ms)
 **** Digital write[2], gpio: 28; value 0
Channel(2) value changed to 1
Button[3] pressed
Relay[3] toggle (duration 0 ms)
Relay[3] turn ON (duration 0 ms)
 **** Digital write[3], gpio: 29; value 0
Channel(3) value changed to 1
Button[4] pressed
 **** Digital write[6], gpio: 32; value 0
Channel(6) value changed to 1
Button[7] pressed
Relay[7] toggle (duration 0 ms)
Relay[7] turn ON (duration 0 ms)
 **** Digital write[7], gpio: 33; value 0
Channel(7) value changed to 1
Button[8] pressed
Button[9] pressed
Relay[0] turn ON (duration 0 ms)
 **** Digital write[0], gpio: 26; value 0
Relay[1] turn ON (duration 0 ms)
 **** Digital write[1], gpio: 27; value 0
Relay[2] turn ON (duration 0 ms)
 **** Digital write[2], gpio: 28; value 0
Relay[3] turn ON (duration 0 ms)
 **** Digital write[3], gpio: 29; value 0
Relay[4] turn ON (duration 0 ms)
 **** Digital write[4], gpio: 30; value 0
Relay[5] turn ON (durationatform 0)
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 28 0 14 5 14 5 ]
Section type: 3; size: 40
storedCRC 1300, CRC calc 1300
Config stRelay[0] turn OFF (duration 0 ms)
 **** Digital write[0], gpio: 26; value 1
Channel(0) value changed to 0
Relay[1] turn OFF (duration 0 ms)
 **** Digital write[1], gpio: 27; value 1
Channel(1) value changed to 0
Relay[2] turn OFF (duration 0 ms)
 **** Digital write[2], gpio: 28; value 1
Channel(2) value changed to 0
Relay[3] turn OFF (duration 0 ms)
 **** Digital write[3], gpio: 29; value 1
Channel(3) value changed to 0
Relay[4] turn OFF (duration 0 ms)
 **** Digital write[4], gpio: 30; value 1
Channel(4) value changed to 0
Relay[5] turn OFF (duration 0 ms)
 **** Digital write[5], gpio: 31; value 1
Channel(5) value changed to 0
Relay[6] turn OFF (duration 0 ms)
 **** Digital write[6], gpio: 32; value 1
Channel(6) value changed to 0
Relay[7] turn OFF (duration 0 ms)
 **** Digital write[7], gpio: 33; vrage not configured
Validating storage state section with current device configuration
Storage state section validation successful
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
Relay[0] turn OFF (duration 0 ms)
 **** Digital write[0], gpio: 26; value 1
Relay[0] turn OFF (duration 0 ms)
 **** Digital write[0], gpio: 26; value 1
Relay[1] turn OFF (duration 0 ms)
 **** Digital write[1], gpio: 27; value 1
Relay[1] turn OFF (duration 0 ms)
 **** Digital write[1], gpio: 27; value 1
Relay[2] turn OFF (duration 0 ms)
 **** Digital write[2], gpio: 28; value 1
Relay[2] turn OFF (duration 0 ms)
 **** Digital write[2], gpio: 28; value 1
Relay[3] turn OFF (duration 0 ms)
 **** Digital write[3], gpio: 29; value 1
Relay[3] turn OFF (duration 0 ms)
 **** Digital write[3], gpio: 29; value 1
Relay[4] turn OFF (duration 0 ms)
 **** Digital write[4], gpio: 30; value 1
Relay[4] turn OFF (duration 0 ms)
 **** Digital write[4], gpio: 30; value 1
Relay[5] turn OFF (duration 0 ms)
 **** Digital write[5], gpio: 31; value 1
Relay[5] turn OFF (duration 0 ms)
 **** Digital write[5], gpio: 31; value 1
Relay[6] turn OFF (duration 0 ms)
 **** Digital write[6], gpio: 32; value 1
Relay[6] turn OFF (duration 0 ms)
 **** Digital write[6], gpio: 32; value 1
Relay[7] turn OFF (duration 0 ms)
 **** Digital write[7], gpio: 33; value 1
Relay[7] turn OFF (duration 0 ms)
 **** Digital write[7], gpio: 33; value 1
GUID: xxxxxxxxxxxxxxxxxxxxxxxxx
Device name: Salon
[NA] Network AP/hostname: SALON-000000000000
Using Supla protocol version 23
Current status: [5] SuplaDevice initialized
Enter normal mode
Connecting to network...
DHCP connection result: 1
localIP: 10.0.0.127
subnetMask: 255.255.255.0
gatewayIP: 10.0.0.1
dnsServerIP: 10.0.0.1
Establishing NOT encrypted connection with: svrx.supla.org (port: 2015)
Connected to Supla Server
Initializing SRPC (proto: 23)
Current status: [10] Register in progress
CH[0], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [00 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[1], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [01 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[2], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [02 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[3], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [03 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[4], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [04 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[5], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [05 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[6], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [06 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[7], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [07 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Send: [53 55 50 4C 41 ]
Relay[0]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 0
Send: [53 55 50 4C 41 ]
Relay[1]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 1
Send: [53 55 50 4C 41 ]
Relay[2]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 2
Send: [53 55 50 4C 41 ]
Relay[3]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 3
Send: [53 55 50 4C 41 ]
Relay[4]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 4
Send: [53 55 50 4C 41 ]
Relay[5]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 5
Send: [53 55 50 4C 41 ]
Relay[6]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 6
Send: [53 55 50 4C 41 ]
Relay[7]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 7
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 17 03 00 00 00 AA 02 00 00 ]
Receiv�Button[8]::setMulticlickTime: 200
Supla - starting initialization (pButton[0] pressed
Relay[0] toggle (duration 0 ms)
Relay[0] turn ON (duration 0 ms)
 **** Digital write[0], gpio: 26; value 0
Channel(0) value changed to 1
Button[1] pressed
Relay[3] toggle (duration 0 ms)
Relay[3] turn ON (duration 0 ms)
 **** Digital write[3], gpio: 29; value 0
Channel(3) value changed to 1
Button[4] pressed
Relay[4] toggle (duration 0 ms)
Relay[4] turn ON (duration 0 ms)
 **** Digital write[4], gpio: 30; value 0
Channel(4) value changed to 1
Button[5] pressed
Relay[5] toggle (duration 0 ms)
Relay[5] turn ON (duration 0 ms)
 **** Digital write[5], gpio: 31; value 0
Channel(5) value changed to 1
Button[6] pressed
Relay[6] toggle (duration 0 ms)
Relay[6] turn ON (duration 0 ms)
 **** Digital write[6], gpio: 32; value 0
Channel(6) value changed to 1
Button[7] pressed
Relay[7] toggle (duration 0 ms)
Relay[7] turn ON (duration 0 ms)
 **** Digital write[7], gpio: 33; value 0
Channel(7) value changed to 1
Button[8] pressed
Button[9] pressed
Relay[0] turn ON (duration 0 ms)
 **** Digital write[0], gpio: 26; value 0
Relay[1] turn ON (duration 0 ms)
 **** Digital write[3], gpio: 29; value 0
Relay[4] turn ON (duration 0 ms)
 **** Digital write[4], gpio: 30; value 0
Relay[5] turn ON (durationatform 0)
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 28 0 14 5 14 5 ]
Section type: 3; size: 40
storedCRC 1300, CRC calc 1300
Config stRelay[0] turn OFF (duration 0 ms)
 **** Digital write[0], gpio: 26; value 1
Channel(0) value changed to 0
Relay[1] turn OFF (duration 0 ms)
 **** Digital write[1], gpio: 27; value 1
Channel(1) value changed to 0
Relay[2] turn OFF (duration 0 ms)
 **** Digital write[2], gpio: 28; value 1
Channel(2) value changed to 0
Relay[3] turn OFF (duration 0 ms)
 **** Digital write[3], gpio: 29; value 1
Channel(3) value changed to 0
Relay[4] turn OFF (duration 0 ms)
 **** Digital write[4], gpio: 30; value 1
Channel(4) value changed to 0
Relay[5] turn OFF (duration 0 ms)
 **** Digital write[5], gpio: 31; value 1
Channel(5) value changed to 0
Relay[6] turn OFF (duration 0 ms)
 **** Digital write[6], gpio: 32; value 1
readStorage: 1; Read: [0 ]
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
Relay[0] turn OFF (duration 0 ms)
 **** Digital write[0], gpio: 26; value 1
Relay[0] turn OFF (duration 0 ms)
 **** Digital write[0], gpio: 26; value 1
Relay[1] turn OFF (duration 0 ms)
 **** Digital write[1], gpio: 27; value 1
Relay[1] turn OFF (duration 0 ms)
 **** Digital write[1], gpio: 27; value 1
Relay[2] turn OFF (duration 0 ms)
 **** Digital write[2], gpio: 28; value 1
Relay[2] turn OFF (duration 0 ms)
 **** Digital write[2], gpio: 28; value 1
Relay[3] turn OFF (duration 0 ms)
 **** Digital write[3], gpio: 29; value 1
Relay[3] turn OFF (duration 0 ms)
 **** Digital write[3], gpio: 29; value 1
Relay[4] turn OFF (duration 0 ms)
 **** Digital write[4], gpio: 30; value 1
Relay[4] turn OFF (duration 0 ms)
 **** Digital write[4], gpio: 30; value 1
Relay[5] turn OFF (duration 0 ms)
 **** Digital write[5], gpio: 31; value 1
Relay[5] turn OFF (duration 0 ms)
 **** Digital write[5], gpio: 31; value 1
Relay[6] turn OFF (duration 0 ms)
 **** Digital write[6], gpio: 32; value 1
Relay[6] turn OFF (duration 0 ms)
Send: [05 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[6], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [06 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[7], type: 2900, FuncList: 0x0, function: 239, flags: 0x
Send: [07 54 0B 00 00 EF 00 00 00 00 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1A 01 53 55 50 4C 41 ]
Device registered (activity timeout 120 s, server version: 26, server min version: 1)
Current status: [17] Registered and ready
Changing activity timeout to 30 s
Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
Send: [53 55 50 4C 41 ]
Relay[0]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 0
Send: [53 55 50 4C 41 ]
Relay[1]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 1
Send: [53 55 50 4C 41 ]
Relay[2]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 2
Send: [53 55 50 4C 41 ]
Relay[3]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 3
Send: [53 55 50 4C 41 ]
Relay[4]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 4
Send: [53 55 50 4C 41 ]
Relay[5]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 5
Send: [53 55 50 4C 41 ]
Relay[6]: updating timer value: remainingTime=0 state=0
SRPC sending: remaining time 0, channel 0, state 6
Send: [53 55 50 4C 41 ]
Relay[6] turn OFF (duration 0 ms)
 **** Digital write[6], gpio: 32; value 1
Relay[6] turn OFF (duration 0 ms)
 **** Digital write[6], gpio: 32; value 1
Relay[7] turn OFF (duration 0 ms)
 **** Digital write[7], gpio: 33; value 1
Relay[7] turn OFF (duration 0 ms)
 **** Digital write[7], gpio: 33; value 1
GUID: xxxxxxxxxxxxxxxxxxxxxxxxxx
Device name: Salon
Device software version: SDK 24.11.04-dev
Initializing network layer
[NA] Network AP/hostname: SALON-000000000000
Using Supla protocol version 23
Current status: [5] SuplaDevice initialized
Enter normal mode
Connecting to network...
DHCP connection result: 1
localIP: 10.0.0.127
subnetMask: 255.255.255.0
gatewayIP: 10.0.0.1
dnsServerIP: 10.0.0.1
Establishing NOT encrypted connection with: svrx.supla.org (port: 2015)
Connected to Supla Server
Initializing SRPC (proto: 23)
Current status: [10] Register in progress
Connection fail (0). Server: svr10.supla.org
Establishing NOT encrypted connection with: svrx.supla.org (port: 2015)
Connection fail (0). Server: svrx.supla.org
mnie to wygląda na resety - jakiś bug w sofcie

P.S. stosuj tagi proszę "[/code]"
YoMan
________________________________________
Wziąłem udział w SOP2023 & SOP2024
Top
User avatar
klew
Posts: 13911
Joined: Thu Jun 27, 2019 12:16 pm
Location: Wrocław
Has thanked: 136 times
Been thanked: 137 times

Post

Tak, wygląda na resety. Możliwie że pamięć się kończy. Dodaj sobie logi z ilością wolnej pamięci
Najlepsze suple dla Twojego domu :mrgreen:
Top
[email protected]
Posts: 23
Joined: Thu Feb 03, 2022 9:36 pm

Post

Udało mi się to naprawić.
Zamiast najnowszej biblioteki 24.11.4 użyłem najstarszej dostępnej 2.3.4.
Działa resetów brak.
Dziękuję za chęć pomocy. Wszystkiego dobrego w Nowym Roku!
Top

Return to “Pomoc”