Dyskusja ogólna [bramka Zigbee]

Moderator: vajera

User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

A to czujnik ruchu. Dokładnie taki (ZP01): https://pl.aliexpress.com/item/1005006627166271.html

Code: Select all

00:34:32.085> 
00:34:32.555> [685074][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x79be) is open for 180 seconds
00:34:32.555> 
00:34:35.148> [687666][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
00:34:35.148> 
00:34:35.148> [687668][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
00:34:35.148> 
00:34:35.684> [688186][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x19f8)
00:34:35.684> 
00:34:35.684> [688187][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x80
00:34:35.684> 
00:34:35.871> [688304][I][ZigbeeGateway.cpp:87] find_Cb(): Found sensor
00:34:35.871> 
00:34:35.871> [688304][D][ZigbeeGateway.cpp:96] find_Cb(): Sensor found: short address(0x19f8), endpoint(1)
00:34:35.871> 
00:34:35.871> [688318][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:34:35.871> 
00:34:35.871> [688318][I][ZigbeeGateway.cpp:162] printJoinedDevices(): Device on endpoint 1, short address: 0x19f8
00:34:35.871> 
00:34:35.871> [688319][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
00:34:35.871> 
00:34:35.871> [688320][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
00:34:35.871> 
00:34:35.871> [688320][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:34:35.871> 
00:34:36.550> [688419][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
00:34:36.550> 
00:34:36.550> [688419][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x19f8) src endpoint(1) 
00:34:36.550> to dst endpoint(1) cluster(0x0)
00:34:36.550> 
00:34:36.550> [688420][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
00:34:36.550> 4), type(0x42), value(16)
00:34:36.550> 
00:34:36.550> [688421][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_lf56vpxj"
00:34:36.550> 
00:34:36.550> [688321][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_lf56vpxj 
00:34:36.550> 
00:34:36.550> [688539][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
00:34:36.550> 
00:34:36.550> [688539][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x19f8) src endpoint(1) 
00:34:36.550> to dst endpoint(1) cluster(0x0)
00:34:36.550> 
00:34:36.550> [688540][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
00:34:36.550> 5), type(0x42), value(6)
00:34:36.550> 
00:34:36.550> [688541][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS0202"
00:34:36.550> 
00:34:36.550> [688542][I][Zigbee_Gateway_2.ino:169] loop(): model TS0202 
00:34:36.550> 
00:34:36.550> [688542][D][Zigbee_Gateway_2.ino:186] loop(): Unknown model TS0202, no binding is possible
00:34:36.550> 
00:34:37.693> [689606][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
00:34:37.693> 
00:34:37.693> [689690][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x79be) is open for 180 seconds
00:34:37.693> 
00:34:48.141> [700641][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
00:34:48.141> 
00:34:48.141> [700641][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x19f8) src endpoint(1) to dst e
00:34:48.141> ndpoint(1) cluster(0x500)
00:34:48.141> 
00:34:48.141> [700642][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1280 
00:34:48.141> 
00:34:48.141> [700642][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 61441 
00:34:48.141> 
00:34:48.578> [700765][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
00:34:48.578> 
00:34:48.578> [700765][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x19f8) src endpoint(1) to dst e
00:34:48.578> ndpoint(1) cluster(0x500)
00:34:48.578> 
00:34:48.578> [700766][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1280 
00:34:48.578> 
00:34:48.578> [700766][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 19 
00:34:48.578> 
00:35:13.063> -----------------------------------------
00:35:13.063> Monitoring stopped (02.01.2025 00:35:13).
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

I jeszcze gniazdko, takie (aukcja przykładowa): https://pl.aliexpress.com/item/1005007003484197.html
Mam wersję 20A (w co oczywiście mało wierzę), ale kosztowało mnie niecałe 11 zł (choice) i o dziwo (po kalibracji) pokazuje zużycie prądu tak samo jak SP111.

Code: Select all

00:41:50.425> [1122902][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
00:41:50.426> 
00:41:50.426> [1122905][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
00:41:50.426> 
00:41:50.694> [1122983][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x7cb5)
00:41:50.694> 
00:41:50.694> [1122984][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x8e
00:41:50.694> 
00:41:50.694> [1122989][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x7cb5)
00:41:50.694> 
00:41:50.694> [1122989][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x8e
00:41:50.694> 
00:41:50.694> [1123072][I][ZigbeeGateway.cpp:87] find_Cb(): Found sensor
00:41:50.694> 
00:41:50.694> [1123073][D][ZigbeeGateway.cpp:96] find_Cb(): Sensor found: short address(0x7cb5), endpoint(1)
00:41:50.694> 
00:41:50.694> [1123078][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:41:50.694> 
00:41:50.694> [1123078][I][ZigbeeGateway.cpp:162] printJoinedDevices(): Device on endpoint 1, short address: 0x7cb5
00:41:50.694> 
00:41:50.694> [1123079][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
00:41:50.694> 
00:41:50.694> [1123079][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
00:41:50.694> 
00:41:50.694> [1123080][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:41:50.694> 
00:41:50.694> [1123095][I][ZigbeeGateway.cpp:87] find_Cb(): Found sensor
00:41:50.694> 
00:41:50.694> [1123095][D][ZigbeeGateway.cpp:96] find_Cb(): Sensor found: short address(0x7cb5), endpoint(1)
00:41:50.694> 
00:41:50.694> [1123140][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
00:41:50.694> 
00:41:50.694> [1123141][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7cb5) src endpoint(1)
00:41:50.694>  to dst endpoint(1) cluster(0x0)
00:41:50.694> 
00:41:50.694> [1123141][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0
00:41:50.694> x4), type(0x42), value(16)
00:41:50.694> 
00:41:50.694> [1123142][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_5f43h46b"
00:41:50.694> 
00:41:50.694> [1123080][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_5f43h46b 
00:41:50.694> 
00:41:52.284> [1123191][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
00:41:52.284> 
00:41:52.284> [1123191][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7cb5) src endpoint(1)
00:41:52.284>  to dst endpoint(1) cluster(0x0)
00:41:52.284> 
00:41:52.284> [1123192][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0
00:41:52.284> x5), type(0x42), value(6)
00:41:52.284> 
00:41:52.284> [1123192][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS011F"
00:41:52.284> 
00:41:52.284> [1123194][I][Zigbee_Gateway_2.ino:169] loop(): model TS011F 
00:41:52.284> 
00:41:52.284> [1123195][D][Zigbee_Gateway_2.ino:186] loop(): Unknown model TS011F, no binding is possible
00:41:52.284> 
00:41:52.285> [1123195][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
00:41:52.285> 
00:41:52.285> [1123196][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
00:41:52.285> 
00:41:52.285> [1123196][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:41:52.285> 
00:41:52.285> [1123242][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
00:41:52.285> 
00:41:52.285> [1123242][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7cb5) src endpoint(1)
00:41:52.285>  to dst endpoint(1) cluster(0x0)
00:41:52.285> 
00:41:52.285> [1123243][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0
00:41:52.285> x4), type(0x42), value(16)
00:41:52.285> 
00:41:52.285> [1123244][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_5f43h46b"
00:41:52.285> 
00:41:52.285> [1123197][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_5f43h46b 
00:41:52.285> 
00:41:52.285> [1123301][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
00:41:52.285> 
00:41:52.285> [1123301][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7cb5) src endpoint(1)
00:41:52.285>  to dst endpoint(1) cluster(0x0)
00:41:52.285> 
00:41:52.285> [1123302][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0
00:41:52.285> x5), type(0x42), value(6)
00:41:52.285> 
00:41:52.285> [1123303][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS011F"
00:41:52.285> 
00:41:52.285> [1123304][I][Zigbee_Gateway_2.ino:169] loop(): model TS011F 
00:41:52.285> 
00:41:52.285> [1123305][D][Zigbee_Gateway_2.ino:186] loop(): Unknown model TS011F, no binding is possible
00:41:52.285> 
00:41:52.285> [1123405][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:41:52.285> 
00:41:52.285> [1123530][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
00:41:52.285> 
00:41:52.285> [1123609][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x79be) is open for 180 seconds
00:41:52.285> 
00:41:56.336> [1128815][I][ZigbeeGateway.cpp:150] printGatewayDevices(): gateway devices:
00:41:56.337> 
00:41:56.337> [1128815][I][ZigbeeGateway.cpp:153] printGatewayDevices(): Device on endpoint 1, short address: 0xf20c
00:41:56.337> 
00:41:56.337> [1128816][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:41:56.337> 
00:41:56.801> [1129284][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
00:41:56.801> 
00:41:56.802> [1129285][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x7cb5) src endpoint(1) to dst 
00:41:56.802> endpoint(1) cluster(0x6)
00:41:56.802> 
00:41:56.802> [1129285][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 6 
00:41:56.802> 
00:41:56.802> [1129286][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
00:41:56.802> 
00:41:57.376> [1129291][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
00:41:57.376> 
00:41:57.376> [1129291][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x7cb5) src endpoint(1) to dst 
00:41:57.376> endpoint(1) cluster(0xe001)
00:41:57.377> 
00:41:57.377> [1129292][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 57345 
00:41:57.377> 
00:41:57.377> [1129292][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 53264 
00:41:57.377> 
00:41:57.377> [1129299][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
00:41:57.377> 
00:41:57.377> [1129300][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x7cb5) src endpoint(1) to dst 
00:41:57.377> endpoint(1) cluster(0xe001)
00:41:57.377> 
00:41:57.377> [1129300][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 57345 
00:41:57.377> 
00:41:57.377> [1129301][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 53296 
00:41:57.377> 
00:42:00.957> [1133441][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NLME Status Indication (0x32), status: ESP_OK
00:42:00.958> 
00:42:56.386> [1188867][I][ZigbeeGateway.cpp:150] printGatewayDevices(): gateway devices:
00:42:56.386> 
00:42:56.386> [1188867][I][ZigbeeGateway.cpp:153] printGatewayDevices(): Device on endpoint 1, short address: 0xf20c
00:42:56.386> 
00:42:56.386> [1188868][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
00:42:56.386> 
00:43:01.684> -----------------------------------------
A na koniec czujnik temperatury i wilgotności. Taki: https://pl.aliexpress.com/item/1005006469579613.html

Code: Select all

01:02:16.216> [ 18235][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
01:02:16.216> 
01:02:16.216> [ 18239][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
01:02:16.216> 
01:02:16.735> [ 18757][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x4e41)
01:02:16.735> 
01:02:16.735> [ 18757][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x80
01:02:16.735> 
01:02:16.998> [ 18873][I][ZigbeeGateway.cpp:87] find_Cb(): Found sensor
01:02:16.998> 
01:02:16.998> [ 18873][D][ZigbeeGateway.cpp:96] find_Cb(): Sensor found: short address(0x4e41), endpoint(1)
01:02:16.998> 
01:02:16.998> [ 18913][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
01:02:16.998> 
01:02:16.998> [ 18913][I][ZigbeeGateway.cpp:162] printJoinedDevices(): Device on endpoint 1, short address: 0x4e41
01:02:16.998> 
01:02:16.998> [ 18914][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
01:02:16.998> 
01:02:16.998> [ 18914][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
01:02:16.998> 
01:02:16.998> [ 18915][I][ZigbeeGateway.cpp:159] printJoinedDevices(): joined devices:
01:02:16.998> 
01:02:16.998> [ 18989][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
01:02:16.998> 
01:02:16.998> [ 18989][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x4e41) src endpoint(1) 
01:02:16.998> to dst endpoint(1) cluster(0x0)
01:02:16.998> 
01:02:16.998> [ 18990][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
01:02:16.998> 4), type(0x42), value(16)
01:02:16.998> 
01:02:16.998> [ 18991][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_fllyghyj"
01:02:16.998> 
01:02:16.998> [ 18915][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_fllyghyj 
01:02:16.998> 
01:02:17.943> [ 19108][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
01:02:17.943> 
01:02:17.943> [ 19108][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x4e41) src endpoint(1) 
01:02:17.943> to dst endpoint(1) cluster(0x0)
01:02:17.943> 
01:02:17.943> [ 19109][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
01:02:17.943> 5), type(0x42), value(6)
01:02:17.943> 
01:02:17.943> [ 19110][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS0201"
01:02:17.943> 
01:02:17.943> [ 19111][I][Zigbee_Gateway_2.ino:169] loop(): model TS0201 
01:02:17.943> 
01:02:17.943> [ 19111][D][Zigbee_Gateway_2.ino:186] loop(): Unknown model TS0201, no binding is possible
01:02:17.943> 
01:02:18.428> [ 20178][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
01:02:18.428> 
01:02:18.428> [ 20257][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x79be) is open for 180 seconds
01:02:18.428> 
01:02:23.393> [ 25401][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:23.393> 
01:02:23.393> [ 25401][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:23.393> ndpoint(1) cluster(0x402)
01:02:23.393> 
01:02:23.393> [ 25402][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1026 
01:02:23.393> 
01:02:23.393> [ 25402][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:23.393> 
01:02:23.711> [ 25526][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:23.711> 
01:02:23.711> [ 25526][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:23.711> ndpoint(1) cluster(0x405)
01:02:23.711> 
01:02:23.711> [ 25527][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1029 
01:02:23.711> 
01:02:23.711> [ 25527][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:23.711> 
01:02:28.387> [ 30406][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:28.387> 
01:02:28.387> [ 30406][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:28.387> ndpoint(1) cluster(0x402)
01:02:28.387> 
01:02:28.387> [ 30407][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1026 
01:02:28.387> 
01:02:28.387> [ 30407][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:28.387> 
01:02:28.812> [ 30530][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:28.812> 
01:02:28.812> [ 30530][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:28.812> ndpoint(1) cluster(0x405)
01:02:28.812> 
01:02:28.812> [ 30531][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1029 
01:02:28.812> 
01:02:28.812> [ 30531][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:28.812> 
01:02:33.387> [ 35407][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:33.387> 
01:02:33.387> [ 35408][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:33.387> ndpoint(1) cluster(0x402)
01:02:33.387> 
01:02:33.387> [ 35409][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1026 
01:02:33.387> 
01:02:33.387> [ 35409][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:33.387> 
01:02:33.772> [ 35533][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:33.772> 
01:02:33.772> [ 35533][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:33.772> ndpoint(1) cluster(0x405)
01:02:33.772> 
01:02:33.772> [ 35534][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1029 
01:02:33.772> 
01:02:33.772> [ 35534][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:33.772> 
01:02:38.392> [ 40410][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:38.392> 
01:02:38.392> [ 40411][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:38.392> ndpoint(1) cluster(0x402)
01:02:38.392> 
01:02:38.392> [ 40411][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1026 
01:02:38.392> 
01:02:38.392> [ 40412][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:38.392> 
01:02:38.760> [ 40534][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:38.760> 
01:02:38.760> [ 40535][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:38.760> ndpoint(1) cluster(0x405)
01:02:38.760> 
01:02:38.760> [ 40535][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1029 
01:02:38.760> 
01:02:38.760> [ 40536][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:38.760> 
01:02:43.390> [ 45412][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:43.391> 
01:02:43.391> [ 45413][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:43.391> ndpoint(1) cluster(0x402)
01:02:43.391> 
01:02:43.391> [ 45413][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1026 
01:02:43.391> 
01:02:43.391> [ 45414][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:43.391> 
01:02:43.778> [ 45537][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:43.778> 
01:02:43.778> [ 45538][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:43.778> ndpoint(1) cluster(0x405)
01:02:43.778> 
01:02:43.778> [ 45538][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1029 
01:02:43.778> 
01:02:43.778> [ 45539][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:43.778> 
01:02:48.404> [ 50417][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:48.404> 
01:02:48.404> [ 50418][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:48.404> ndpoint(1) cluster(0x402)
01:02:48.404> 
01:02:48.404> [ 50418][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1026 
01:02:48.404> 
01:02:48.404> [ 50419][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:48.404> 
01:02:48.750> [ 50541][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
01:02:48.750> 
01:02:48.750> [ 50542][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e41) src endpoint(1) to dst e
01:02:48.750> ndpoint(1) cluster(0x405)
01:02:48.750> 
01:02:48.750> [ 50543][I][ZigbeeGateway.cpp:170] zbAttributeRead(): cluster_id 1029 
01:02:48.750> 
01:02:48.750> [ 50543][I][ZigbeeGateway.cpp:171] zbAttributeRead(): attribute->id 0 
01:02:48.750> 
01:02:51.118> -----------------------------------------
01:02:51.118> Monitoring stopped (02.01.2025 01:02:51).
Mam jeszcze pod ręką czujnik zalania, głowicę termostatyczną i przycisk z pokrętłem. I kilka innych rzeczy mogę sprawdzić (ale dostęp do nich mam utrudniony). Myślę też, że poczekam jak ustalimy gdzie to wrzucać, bo może tego trochę być...
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

Możecie podpowiedzieć czy w samym Arduino należy coś odkomentować lub, wpisac?
Program wgrałem ale logi tylko takie:

Code: Select all

08:20:29.960 -> ESP-ROM:esp32c6-20220919
08:20:29.960 -> Build:Sep 19 2022
08:20:29.960 -> rst:0xc (SW_CPU),boot:0x1e (SPI_FAST_FLASH_BOOT)
08:20:29.960 -> Saved PC:0x4001975a
08:20:29.960 -> SPIWP:0xee
08:20:29.960 -> mode:DIO, clock div:2
08:20:29.960 -> load:0x4086c410,len:0xcf8
08:20:29.960 -> load:0x4086e610,len:0x2e30
08:20:29.960 -> load:0x40875728,len:0x113c
08:20:29.960 -> entry 0x4086c410
Top
User avatar
vajera
Posts: 7291
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

lukasz06 wrote: Thu Jan 02, 2025 7:28 am Możecie podpowiedzieć czy w samym Arduino należy coś odkomentować lub, wpisac?
Program wgrałem ale logi tylko takie:

Code: Select all

08:20:29.960 -> ESP-ROM:esp32c6-20220919
08:20:29.960 -> Build:Sep 19 2022
08:20:29.960 -> rst:0xc (SW_CPU),boot:0x1e (SPI_FAST_FLASH_BOOT)
08:20:29.960 -> Saved PC:0x4001975a
08:20:29.960 -> SPIWP:0xee
08:20:29.960 -> mode:DIO, clock div:2
08:20:29.960 -> load:0x4086c410,len:0xcf8
08:20:29.960 -> load:0x4086e610,len:0x2e30
08:20:29.960 -> load:0x40875728,len:0x113c
08:20:29.960 -> entry 0x4086c410
zrób screen ustawień płytki
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
vajera
Posts: 7291
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

@Zibi_007 - sprawdź w wolnej chwili, co teraz wypluwa ten przycisk x4 (sprawdź każdy z przycisków, proszę), czujnik ruchu i ten od temperatury.

Przy okazji - podobno ten przycisk 4x sprawia problemy przy słabych bateriach a on wysyłał jakieś atrybuty dla klastra 0x1 (power management).

EDIT - naniosłem jeszcze kolejne poprawki - również w kwestii tego gniazdka z pomiarem.
Daj znać czy się kompiluje bo nadal wrzucam to z komórki.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

Ja zaktualizowałem, lecz teraz się nie kompiluje. Poniżej screen ustawień płytki
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

vajera wrote: Thu Jan 02, 2025 9:00 pm @Zibi_007 - sprawdź w wolnej chwili, co teraz wypluwa ten przycisk x4 (sprawdź każdy z przycisków, proszę), czujnik ruchu i ten od temperatury.

Przy okazji - podobno ten przycisk 4x sprawia problemy przy słabych bateriach a on wysyłał jakieś atrybuty dla klastra 0x1 (power management).

EDIT - naniosłem jeszcze kolejne poprawki - również w kwestii tego gniazdka z pomiarem.
Daj znać czy się kompiluje bo nadal wrzucam to z komórki.
Kod się nie kompiluje, wypluwa błędy:

Code: Select all

C:\Users\xxx\Documents\Arduino\Zigbee_Gateway_2\Zigbee_Gateway_2.ino: In function 'void loop()':
C:\Users\xxx\Documents\Arduino\Zigbee_Gateway_2\Zigbee_Gateway_2.ino:171:38: error: expected ';' before '{' token
  171 |       strcmp(zbd_model_name,"TS0201") {
      |                                      ^~
      |                                      ;
C:\Users\xxx\Documents\Arduino\Zigbee_Gateway_2\Zigbee_Gateway_2.ino:175:9: error: expected primary-expression before 'else'
  175 |       } else
      |         ^~~~
C:\Users\xxx\Documents\Arduino\Zigbee_Gateway_2\Zigbee_Gateway_2.ino:175:8: error: expected ')' before 'else'
  175 |       } else
      |        ^~~~~
      |        )
C:\Users\xxx\Documents\Arduino\Zigbee_Gateway_2\Zigbee_Gateway_2.ino:170:10: note: to match this '('
  170 |       if ((strcmp(zbd_model_name,"ZigbeeTempSensor") == 0)||
      |          ^

exit status 1

Compilation error: expected ';' before '{' token
Poprawiłem linię 171 na:

Code: Select all

          strcmp(zbd_model_name,"TS0201") ==0) {
Skompilowałem. Uruchomiłem. Sprawdziłem przycisk. Może i baterie są słabe, nie mam pod ręką teraz nowych. W każdym razie takie coś teraz loguje:

Code: Select all

03:58:18.406> pp_signal_handler(): Network(0x1880) is open for 180 seconds
03:58:18.406> 
03:58:18.406> [  4432][V][ZigbeeCore.cpp:200] openNetwork(): Opening network for joining for 180 seconds
03:58:18.406> 
03:58:18.406> [  4899][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x1880) is open for 180 seconds
03:58:18.406> 
03:58:26.102> [ 17804][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:58:26.102> 
03:58:26.102> [ 17805][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:58:26.102> ize(1)
03:58:26.102> 
03:58:33.882> [ 25586][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Leave Indication (0x13), status: ESP_OK
03:58:33.882> 
03:58:37.693> [ 29393][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
03:58:37.693> 
03:58:37.693> [ 29395][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
03:58:37.693> 
03:58:38.208> [ 29914][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xa212)
03:58:38.208> 
03:58:38.208> [ 29914][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x80
03:58:38.208> 
03:58:38.725> [ 30420][I][ZigbeeGateway.cpp:91] find_Cb(): Found sensor
03:58:38.725> 
03:58:38.725> [ 30420][D][ZigbeeGateway.cpp:100] find_Cb(): Sensor found: short address(0xa212), endpoint(1)
03:58:38.725> 
03:58:38.826> [ 30502][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
03:58:38.826> 
03:58:38.826> [ 30503][I][ZigbeeGateway.cpp:166] printJoinedDevices(): Device on endpoint 1, short address: 0xa212
03:58:38.826> 
03:58:38.826> [ 30503][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
03:58:38.827> 
03:58:38.827> [ 30504][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
03:58:38.827> 
03:58:38.827> [ 30504][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
03:58:38.827> 
03:58:39.228> [ 30922][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
03:58:39.228> 
03:58:39.228> [ 30922][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa212) src endpoint(1) 
03:58:39.228> to dst endpoint(1) cluster(0x0)
03:58:39.228> 
03:58:39.228> [ 30923][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
03:58:39.228> 4), type(0x42), value(16)
03:58:39.228> 
03:58:39.228> [ 30924][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_wkai4ga5"
03:58:39.228> 
03:58:39.228> [ 30505][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_wkai4ga5 
03:58:39.228> 
03:58:39.725> [ 31426][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
03:58:39.725> 
03:58:39.725> [ 31427][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa212) src endpoint(1) 
03:58:39.725> to dst endpoint(1) cluster(0x0)
03:58:39.725> 
03:58:39.725> [ 31427][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
03:58:39.725> 5), type(0x42), value(6)
03:58:39.725> 
03:58:39.725> [ 31428][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS0044"
03:58:39.725> 
03:58:39.725> [ 31430][I][Zigbee_Gateway_2.ino:169] loop(): model TS0044 
03:58:39.725> 
03:58:39.725> [ 31431][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
03:58:39.725> 
03:58:39.725> [ 31435][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
03:58:39.725> 
03:58:39.725> [ 31435][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
03:58:39.725> 
03:58:40.168> [ 31524][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
03:58:40.168> 
03:58:40.168> [ 31534][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
03:58:40.168> 
03:58:40.317> [ 32020][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x1880) is open for 180 seconds
03:58:40.317> 
03:58:48.635> [ 40335][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:58:48.635> 
03:58:48.635> [ 40336][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:58:48.635> ndpoint(1) cluster(0x1)
03:58:48.635> 
03:58:48.635> [ 40337][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:58:48.635> 
03:58:48.635> [ 40337][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 33 
03:58:48.635> 
03:58:48.635> [ 40337][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:58:48.635> 
03:58:48.635> [ 40338][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:58:48.635> ndpoint(1) cluster(0x1)
03:58:48.635> 
03:58:48.635> [ 40338][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:58:48.635> 
03:58:48.635> [ 40339][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 32 
03:58:48.635> 
03:58:58.664> [ 50372][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:58:58.664> 
03:58:58.664> [ 50372][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:58:58.664> ndpoint(1) cluster(0x1)
03:58:58.664> 
03:58:58.664> [ 50373][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:58:58.664> 
03:58:58.664> [ 50373][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 33 
03:58:58.664> 
03:58:58.664> [ 50374][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:58:58.664> 
03:58:58.941> [ 50374][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:58:58.941> ndpoint(1) cluster(0x1)
03:58:58.941> 
03:58:58.941> [ 50375][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:58:58.941> 
03:58:58.941> [ 50375][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 32 
03:58:58.941> 
03:59:05.864> [ 57569][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:05.864> 
03:59:05.864> [ 57569][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:05.864> ize(1)
03:59:05.864> 
03:59:08.977> [ 60674][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:59:08.977> 
03:59:08.977> [ 60674][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:59:08.977> ndpoint(1) cluster(0x1)
03:59:08.977> 
03:59:08.977> [ 60675][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:59:08.977> 
03:59:08.977> [ 60675][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 33 
03:59:08.977> 
03:59:08.977> [ 60676][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:59:08.977> 
03:59:08.977> [ 60676][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:59:08.977> ndpoint(1) cluster(0x1)
03:59:08.977> 
03:59:08.977> [ 60677][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:59:08.977> 
03:59:08.977> [ 60677][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 32 
03:59:08.977> 
03:59:10.808> [ 62515][I][ZigbeeGateway.cpp:154] printGatewayDevices(): gateway devices:
03:59:10.808> 
03:59:10.808> [ 62515][I][ZigbeeGateway.cpp:157] printGatewayDevices(): Device on endpoint 1, short address: 0x5a7d
03:59:10.808> 
03:59:10.808> [ 62516][I][ZigbeeGateway.cpp:157] printGatewayDevices(): Device on endpoint 1, short address: 0xa212
03:59:10.808> 
03:59:10.808> [ 62517][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
03:59:10.808> 
03:59:18.928> [ 70636][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:59:18.928> 
03:59:18.928> [ 70637][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:59:18.928> ndpoint(1) cluster(0x1)
03:59:18.928> 
03:59:18.928> [ 70637][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:59:18.928> 
03:59:18.928> [ 70638][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 33 
03:59:18.929> 
03:59:18.929> [ 70638][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
03:59:18.929> 
03:59:19.200> [ 70638][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0xa212) src endpoint(1) to dst e
03:59:19.200> ndpoint(1) cluster(0x1)
03:59:19.200> 
03:59:19.200> [ 70639][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1 
03:59:19.200> 
03:59:19.200> [ 70639][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 32 
03:59:19.200> 
03:59:25.759> [ 77467][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:25.759> 
03:59:25.759> [ 77468][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:25.759> ize(1)
03:59:25.759> 
03:59:26.272> [ 77967][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:26.272> 
03:59:26.272> [ 77968][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:26.272> ize(1)
03:59:26.272> 
03:59:26.772> [ 78467][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:26.772> 
03:59:26.772> [ 78468][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:26.772> ize(1)
03:59:26.772> 
03:59:31.385> [ 83089][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:31.385> 
03:59:31.385> [ 83089][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:31.385> ize(1)
03:59:31.385> 
03:59:31.881> [ 83590][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:31.881> 
03:59:31.881> [ 83590][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:31.881> ize(1)
03:59:31.881> 
03:59:33.239> [ 84941][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:33.239> 
03:59:33.239> [ 84941][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:33.239> ize(1)
03:59:33.239> 
03:59:34.131> [ 85838][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:34.131> 
03:59:34.131> [ 85838][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:34.131> ize(1)
03:59:34.131> 
03:59:37.669> [ 89378][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:37.669> 
03:59:37.669> [ 89379][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:37.669> ize(1)
03:59:37.669> 
03:59:38.181> [ 89879][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:38.181> 
03:59:38.181> [ 89880][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:38.181> ize(1)
03:59:38.181> 
03:59:42.988> [ 94695][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:42.988> 
03:59:42.988> [ 94696][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:42.988> ize(1)
03:59:42.988> 
03:59:43.498> [ 95195][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:43.498> 
03:59:43.498> [ 95196][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:43.498> ize(1)
03:59:43.498> 
03:59:43.993> [ 95698][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:43.993> 
03:59:43.993> [ 95699][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:43.993> ize(1)
03:59:43.993> 
03:59:44.488> [ 96198][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:44.488> 
03:59:44.488> [ 96198][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:44.488> ize(1)
03:59:44.488> 
03:59:48.648> [100350][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:48.648> 
03:59:48.648> [100350][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:48.648> ize(1)
03:59:48.648> 
03:59:49.152> [100850][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x0) callback
03:59:49.152> 
03:59:49.152> [100850][V][ZigbeeHandlers.cpp:42] zb_attribute_set_handler(): Received message: endpoint(1), cluster(0x6), attribute(0x0), data s
03:59:49.152> ize(1)
03:59:49.152>
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

Czujnik temperatury i wilgotności:

Code: Select all

04:09:57.230> [  3518][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x0655) is open for 180 seconds
04:09:57.230> 
04:09:57.230> [  3520][I][ZigbeeCore.cpp:276] esp_zb_app_signal_handler(): Network steering started
04:09:57.230> 
04:10:38.459> [ 45962][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
04:10:38.459> 
04:10:38.459> [ 45964][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
04:10:38.459> 
04:10:38.991> [ 46484][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x6b4c)
04:10:38.991> 
04:10:38.991> [ 46485][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x80
04:10:38.991> 
04:10:39.148> [ 46602][I][ZigbeeGateway.cpp:91] find_Cb(): Found sensor
04:10:39.148> 
04:10:39.148> [ 46602][D][ZigbeeGateway.cpp:100] find_Cb(): Sensor found: short address(0x6b4c), endpoint(1)
04:10:39.148> 
04:10:39.148> [ 46630][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
04:10:39.148> 
04:10:39.149> [ 46631][I][ZigbeeGateway.cpp:166] printJoinedDevices(): Device on endpoint 1, short address: 0x6b4c
04:10:39.149> 
04:10:39.149> [ 46631][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
04:10:39.149> 
04:10:39.149> [ 46632][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
04:10:39.149> 
04:10:39.149> [ 46633][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
04:10:39.149> 
04:10:39.749> [ 46723][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
04:10:39.749> 
04:10:39.749> [ 46723][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x6b4c) src endpoint(1) 
04:10:39.749> to dst endpoint(1) cluster(0x0)
04:10:39.749> 
04:10:39.749> [ 46724][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
04:10:39.749> 4), type(0x42), value(16)
04:10:39.749> 
04:10:39.749> [ 46725][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_fllyghyj"
04:10:39.749> 
04:10:39.749> [ 46633][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_fllyghyj 
04:10:39.749> 
04:10:39.749> [ 46838][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
04:10:39.749> 
04:10:39.749> [ 46839][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x6b4c) src endpoint(1) 
04:10:39.749> to dst endpoint(1) cluster(0x0)
04:10:39.749> 
04:10:39.749> [ 46840][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
04:10:39.749> 5), type(0x42), value(6)
04:10:39.749> 
04:10:39.749> [ 46840][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS0201"
04:10:39.750> 
04:10:39.750> [ 46841][I][Zigbee_Gateway_2.ino:169] loop(): model TS0201 
04:10:39.750> 
04:10:39.750> [ 46842][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
04:10:39.750> 
04:10:39.750> [ 46845][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
04:10:39.750> 
04:10:39.750> [ 46845][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:10:39.750> 
04:10:39.750> [ 46970][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:10:39.750> 
04:10:41.231> [ 47915][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
04:10:41.231> 
04:10:41.231> [ 47986][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x0655) is open for 180 seconds
04:10:41.231> 
04:10:45.648> [ 53142][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:10:45.648> 
04:10:45.649> [ 53143][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:10:45.649> ndpoint(1) cluster(0x402)
04:10:45.649> 
04:10:45.649> [ 53143][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:10:45.649> 
04:10:45.649> [ 53144][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:10:45.649> 
04:10:46.001> [ 53267][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:10:46.001> 
04:10:46.001> [ 53267][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:10:46.001> ndpoint(1) cluster(0x405)
04:10:46.001> 
04:10:46.002> [ 53268][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:10:46.002> 
04:10:46.002> [ 53268][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:10:46.002> 
04:10:50.556> [ 58053][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:10:50.556> 
04:10:50.556> [ 58053][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:10:50.556> ndpoint(1) cluster(0x402)
04:10:50.556> 
04:10:50.556> [ 58054][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:10:50.556> 
04:10:50.556> [ 58054][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:10:50.556> 
04:10:50.907> [ 58177][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:10:50.907> 
04:10:50.907> [ 58178][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:10:50.907> ndpoint(1) cluster(0x405)
04:10:50.907> 
04:10:50.907> [ 58178][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:10:50.907> 
04:10:50.907> [ 58179][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:10:50.907> 
04:10:53.180> [ 60680][I][ZigbeeGateway.cpp:154] printGatewayDevices(): gateway devices:
04:10:53.180> 
04:10:53.180> [ 60681][I][ZigbeeGateway.cpp:157] printGatewayDevices(): Device on endpoint 1, short address: 0x6b4c
04:10:53.180> 
04:10:53.180> [ 60681][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
04:10:53.180> 
04:10:55.553> [ 63055][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:10:55.553> 
04:10:55.553> [ 63056][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:10:55.553> ndpoint(1) cluster(0x402)
04:10:55.553> 
04:10:55.553> [ 63056][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:10:55.553> 
04:10:55.553> [ 63057][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:10:55.553> 
04:10:55.792> [ 63180][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:10:55.792> 
04:10:55.792> [ 63181][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:10:55.792> ndpoint(1) cluster(0x405)
04:10:55.792> 
04:10:55.792> [ 63182][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:10:55.792> 
04:10:55.792> [ 63182][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:10:55.792> 
04:11:00.557> [ 68059][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:00.557> 
04:11:00.557> [ 68060][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:00.557> ndpoint(1) cluster(0x402)
04:11:00.557> 
04:11:00.557> [ 68061][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:00.557> 
04:11:00.557> [ 68061][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:00.557> 
04:11:00.789> [ 68184][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:00.789> 
04:11:00.789> [ 68184][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:00.789> ndpoint(1) cluster(0x405)
04:11:00.789> 
04:11:00.789> [ 68185][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:00.789> 
04:11:00.789> [ 68185][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:00.789> 
04:11:05.571> [ 73063][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:05.571> 
04:11:05.571> [ 73063][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:05.571> ndpoint(1) cluster(0x402)
04:11:05.571> 
04:11:05.571> [ 73064][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:05.571> 
04:11:05.571> [ 73064][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:05.571> 
04:11:05.804> [ 73187][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:05.805> 
04:11:05.805> [ 73187][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:05.805> ndpoint(1) cluster(0x405)
04:11:05.805> 
04:11:05.805> [ 73188][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:05.805> 
04:11:05.805> [ 73188][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:05.805> 
04:11:10.573> [ 78067][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:10.573> 
04:11:10.573> [ 78067][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:10.573> ndpoint(1) cluster(0x402)
04:11:10.573> 
04:11:10.573> [ 78068][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:10.573> 
04:11:10.573> [ 78068][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:10.573> 
04:11:10.805> [ 78191][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:10.805> 
04:11:10.805> [ 78191][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:10.805> ndpoint(1) cluster(0x405)
04:11:10.805> 
04:11:10.805> [ 78192][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:10.805> 
04:11:10.805> [ 78192][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:10.805> 
04:11:15.567> [ 83071][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:15.567> 
04:11:15.567> [ 83072][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:15.567> ndpoint(1) cluster(0x402)
04:11:15.567> 
04:11:15.567> [ 83072][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:15.567> 
04:11:15.745> [ 83073][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:15.745> 
04:11:15.745> [ 83196][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:15.745> 
04:11:15.745> [ 83197][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:15.745> ndpoint(1) cluster(0x405)
04:11:15.745> 
04:11:15.745> [ 83198][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:15.745> 
04:11:15.745> [ 83198][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:15.745> 
04:11:20.584> [ 88075][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:20.584> 
04:11:20.584> [ 88076][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:20.584> ndpoint(1) cluster(0x402)
04:11:20.584> 
04:11:20.584> [ 88077][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:20.584> 
04:11:20.584> [ 88077][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:20.584> 
04:11:20.807> [ 88200][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:20.807> 
04:11:20.807> [ 88201][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:20.807> ndpoint(1) cluster(0x405)
04:11:20.807> 
04:11:20.807> [ 88202][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:20.807> 
04:11:20.807> [ 88202][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:20.807> 
04:11:25.573> [ 93078][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:25.573> 
04:11:25.573> [ 93078][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:25.649> ndpoint(1) cluster(0x402)
04:11:25.649> 
04:11:25.649> [ 93079][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:25.649> 
04:11:25.649> [ 93079][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:25.649> 
04:11:25.800> [ 93203][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:25.800> 
04:11:25.800> [ 93203][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:25.800> ndpoint(1) cluster(0x405)
04:11:25.800> 
04:11:25.800> [ 93204][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:25.800> 
04:11:25.800> [ 93204][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:25.800> 
04:11:30.583> [ 98082][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:30.583> 
04:11:30.583> [ 98082][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:30.583> ndpoint(1) cluster(0x402)
04:11:30.583> 
04:11:30.583> [ 98083][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:30.583> 
04:11:30.583> [ 98083][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:30.583> 
04:11:30.809> [ 98206][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:30.809> 
04:11:30.809> [ 98206][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:30.809> ndpoint(1) cluster(0x405)
04:11:30.809> 
04:11:30.809> [ 98207][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:30.809> 
04:11:30.809> [ 98207][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:30.809> 
04:11:35.583> [103083][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:35.583> 
04:11:35.583> [103083][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:35.583> ndpoint(1) cluster(0x402)
04:11:35.583> 
04:11:35.583> [103084][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:35.583> 
04:11:35.583> [103084][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:35.583> 
04:11:35.808> [103208][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:35.808> 
04:11:35.808> [103209][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:35.808> ndpoint(1) cluster(0x405)
04:11:35.808> 
04:11:35.808> [103209][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:35.808> 
04:11:35.808> [103210][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:35.808> 
04:11:40.584> [108085][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:40.584> 
04:11:40.584> [108085][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:40.584> ndpoint(1) cluster(0x402)
04:11:40.584> 
04:11:40.584> [108086][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:40.584> 
04:11:40.584> [108086][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:40.584> 
04:11:40.834> [108210][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:40.834> 
04:11:40.834> [108211][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:40.834> ndpoint(1) cluster(0x405)
04:11:40.834> 
04:11:40.834> [108211][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:40.834> 
04:11:40.834> [108212][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:40.835> 
04:11:45.648> [113150][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:45.648> 
04:11:45.649> [113150][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:45.649> ndpoint(1) cluster(0x402)
04:11:45.649> 
04:11:45.649> [113151][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1026 
04:11:45.649> 
04:11:45.649> [113151][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:45.649> 
04:11:45.868> [113274][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:11:45.868> 
04:11:45.868> [113274][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x6b4c) src endpoint(1) to dst e
04:11:45.868> ndpoint(1) cluster(0x405)
04:11:45.868> 
04:11:45.868> [113275][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 1029 
04:11:45.868> 
04:11:45.868> [113275][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:11:45.868> 
04:11:50.860> -----------------------------------------
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

I gniazdko. Ostatnie kilkanaście linijek, to reakcja na przycisk (włącz/wyłącz) na obudowie. Działa (loguje) natychmiastowo (w przeciwieństwie do tego switch 4ch).

Code: Select all

04:20:20.378> 
04:20:20.378> [  3509][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x6401) is open for 180 seconds
04:20:20.378> 
04:20:20.378> [  3511][I][ZigbeeCore.cpp:276] esp_zb_app_signal_handler(): Network steering started
04:20:20.378> 
04:20:24.568> [  7956][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
04:20:24.568> 
04:20:24.568> [  7958][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
04:20:24.568> 
04:20:24.701> [  8034][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x4e25)
04:20:24.701> 
04:20:24.701> [  8034][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x8e
04:20:24.701> 
04:20:24.701> [  8039][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x4e25)
04:20:24.701> 
04:20:24.701> [  8039][V][ZigbeeCore.cpp:303] esp_zb_app_signal_handler(): Device capabilities: 0x8e
04:20:24.701> 
04:20:24.928> [  8125][I][ZigbeeGateway.cpp:91] find_Cb(): Found sensor
04:20:24.928> 
04:20:24.928> [  8125][D][ZigbeeGateway.cpp:100] find_Cb(): Sensor found: short address(0x4e25), endpoint(1)
04:20:24.928> 
04:20:24.928> [  8127][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
04:20:24.928> 
04:20:24.928> [  8127][I][ZigbeeGateway.cpp:166] printJoinedDevices(): Device on endpoint 1, short address: 0x4e25
04:20:24.928> 
04:20:24.928> [  8128][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
04:20:24.928> 
04:20:24.928> [  8129][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
04:20:24.928> 
04:20:24.928> [  8129][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
04:20:24.928> 
04:20:24.928> [  8154][I][ZigbeeGateway.cpp:91] find_Cb(): Found sensor
04:20:24.928> 
04:20:24.928> [  8155][D][ZigbeeGateway.cpp:100] find_Cb(): Sensor found: short address(0x4e25), endpoint(1)
04:20:24.928> 
04:20:24.928> [  8204][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
04:20:24.928> 
04:20:24.928> [  8205][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x4e25) src endpoint(1) 
04:20:24.928> to dst endpoint(1) cluster(0x0)
04:20:24.928> 
04:20:24.928> [  8206][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
04:20:24.928> 4), type(0x42), value(16)
04:20:24.928> 
04:20:24.928> [  8206][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_5f43h46b"
04:20:24.928> 
04:20:24.928> [  8130][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_5f43h46b 
04:20:24.928> 
04:20:24.928> [  8250][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
04:20:24.928> 
04:20:24.928> [  8250][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x4e25) src endpoint(1) 
04:20:24.928> to dst endpoint(1) cluster(0x0)
04:20:24.928> 
04:20:24.928> [  8251][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
04:20:24.928> 5), type(0x42), value(6)
04:20:24.928> 
04:20:24.928> [  8252][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS011F"
04:20:24.928> 
04:20:24.928> [  8253][I][Zigbee_Gateway_2.ino:169] loop(): model TS011F 
04:20:24.928> 
04:20:24.928> [  8254][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
04:20:24.928> 
04:20:24.928> [  8254][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
04:20:24.928> 
04:20:24.929> [  8255][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
04:20:24.929> 
04:20:24.929> [  8264][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
04:20:24.929> 
04:20:24.929> [  8265][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:24.929> 
04:20:24.929> [  8265][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
04:20:24.929> 
04:20:24.929> [  8265][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:24.929> 
04:20:24.929> [  8266][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
04:20:24.929> 
04:20:24.929> [  8266][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:24.929> 
04:20:24.929> [  8267][D][Zigbee_Gateway_2.ino:161] loop(): getJoinedDEvices 1 0 357913941 before
04:20:24.929> 
04:20:24.929> [  8269][D][Zigbee_Gateway_2.ino:164] loop(): getJoinedDEvices 1 0 357913941 after
04:20:24.929> 
04:20:24.929> [  8269][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
04:20:24.929> 
04:20:26.896> [  8352][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.896> 
04:20:26.896> [  8388][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.896> 
04:20:26.896> [  8421][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.896> 
04:20:26.896> [  8435][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
04:20:26.896> 
04:20:26.896> [  8435][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x4e25) src endpoint(1) 
04:20:26.896> to dst endpoint(1) cluster(0x0)
04:20:26.896> 
04:20:26.896> [  8436][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
04:20:26.896> 4), type(0x42), value(16)
04:20:26.897> 
04:20:26.897> [  8436][I][ZigbeeEP.cpp:223] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_5f43h46b"
04:20:26.897> 
04:20:26.897> [  8270][I][Zigbee_Gateway_2.ino:167] loop(): manufacturer _TZ3000_5f43h46b 
04:20:26.897> 
04:20:26.897> [  8520][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x1000) callback
04:20:26.897> 
04:20:26.898> [  8520][V][ZigbeeHandlers.cpp:87] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x4e25) src endpoint(1) 
04:20:26.898> to dst endpoint(1) cluster(0x0)
04:20:26.898> 
04:20:26.898> [  8521][V][ZigbeeHandlers.cpp:96] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x
04:20:26.898> 5), type(0x42), value(6)
04:20:26.898> 
04:20:26.898> [  8521][I][ZigbeeEP.cpp:232] zbReadBasicCluster(): Peer Model is "TS011F"
04:20:26.898> 
04:20:26.898> [  8523][I][Zigbee_Gateway_2.ino:169] loop(): model TS011F 
04:20:26.898> 
04:20:26.898> [  8524][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
04:20:26.898> 
04:20:26.898> [  8524][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
04:20:26.898> 
04:20:26.898> [  8525][D][ZigbeeGateway.cpp:112] bindDeviceCluster(): Request sensor to bind us
04:20:26.898> 
04:20:26.898> [  8534][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
04:20:26.898> 
04:20:26.898> [  8535][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.899> 
04:20:26.899> [  8535][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
04:20:26.899> 
04:20:26.899> [  8535][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.899> 
04:20:26.899> [  8536][V][ZigbeeGateway.cpp:73] bindCb(): Binding success (ZC side)
04:20:26.899> 
04:20:26.899> [  8536][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.899> 
04:20:26.899> [  8636][I][ZigbeeGateway.cpp:163] printJoinedDevices(): joined devices:
04:20:26.899> 
04:20:26.899> [  8660][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.899> 
04:20:26.899> [  8710][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.899> 
04:20:26.899> [  8726][V][ZigbeeGateway.cpp:75] bindCb(): Binding success (ED side
04:20:26.899> 
04:20:26.899> [  8749][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
04:20:26.899> 
04:20:26.899> [  8815][I][ZigbeeCore.cpp:327] esp_zb_app_signal_handler(): Network(0x6401) is open for 180 seconds
04:20:26.899> 
04:20:31.897> [ 15284][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:20:31.897> 
04:20:31.897> [ 15285][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e25) src endpoint(1) to dst e
04:20:31.897> ndpoint(1) cluster(0x6)
04:20:31.897> 
04:20:31.897> [ 15286][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 6 
04:20:31.897> 
04:20:31.897> [ 15286][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:20:31.897> 
04:20:31.897> [ 15290][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:20:31.897> 
04:20:31.897> [ 15291][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e25) src endpoint(1) to dst e
04:20:31.897> ndpoint(1) cluster(0xe001)
04:20:31.897> 
04:20:31.897> [ 15291][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 57345 
04:20:31.897> 
04:20:32.420> [ 15292][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 53264 
04:20:32.420> 
04:20:32.420> [ 15374][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:20:32.420> 
04:20:32.420> [ 15375][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e25) src endpoint(1) to dst e
04:20:32.420> ndpoint(1) cluster(0xe001)
04:20:32.420> 
04:20:32.420> [ 15376][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 57345 
04:20:32.420> 
04:20:32.420> [ 15376][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 53296 
04:20:32.420> 
04:20:35.294> [ 18679][V][ZigbeeCore.cpp:340] esp_zb_app_signal_handler(): ZDO signal: NLME Status Indication (0x32), status: ESP_OK
04:20:35.294> 
04:20:58.917> [ 42309][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:20:58.918> 
04:20:58.918> [ 42309][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e25) src endpoint(1) to dst e
04:20:58.918> ndpoint(1) cluster(0x6)
04:20:58.918> 
04:20:58.918> [ 42310][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 6 
04:20:58.918> 
04:20:58.918> [ 42310][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:20:58.918> 
04:21:03.728> [ 47112][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:21:03.728> 
04:21:03.728> [ 47113][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e25) src endpoint(1) to dst e
04:21:03.728> ndpoint(1) cluster(0x6)
04:21:03.728> 
04:21:03.728> [ 47113][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 6 
04:21:03.728> 
04:21:03.728> [ 47114][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:21:03.728> 
04:21:05.396> [ 48787][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:21:05.396> 
04:21:05.396> [ 48787][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e25) src endpoint(1) to dst e
04:21:05.396> ndpoint(1) cluster(0x6)
04:21:05.396> 
04:21:05.396> [ 48788][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 6 
04:21:05.396> 
04:21:05.396> [ 48789][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:21:05.396> 
04:21:06.603> [ 49998][I][ZigbeeHandlers.cpp:20] zb_action_handler(): Receive Zigbee action(0x2000) callback
04:21:06.603> 
04:21:06.603> [ 49998][V][ZigbeeHandlers.cpp:67] zb_attribute_reporting_handler(): Received report from address(0x4e25) src endpoint(1) to dst e
04:21:06.603> ndpoint(1) cluster(0x6)
04:21:06.603> 
04:21:06.773> [ 49999][I][ZigbeeGateway.cpp:174] zbAttributeRead(): cluster_id 6 
04:21:06.773> 
04:21:06.773> [ 49999][I][ZigbeeGateway.cpp:175] zbAttributeRead(): attribute->id 0 
04:21:06.773> 
04:21:17.271> [ 60666][I][ZigbeeGateway.cpp:154] printGatewayDevices(): gateway devices:
04:21:17.271> 
04:21:17.272> [ 60667][I][ZigbeeGateway.cpp:157] printGatewayDevices(): Device on endpoint 1, short address: 0x4e25
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
vajera
Posts: 7291
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

lukasz06 wrote: Thu Jan 02, 2025 11:14 pm Ja zaktualizowałem, lecz teraz się nie kompiluje. Poniżej screen ustawień płytki
poprawiłem kod - tak to jest jak z komórki się pisze 😉
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top

Return to “Bramka ZigBee”