Dyskusja ogólna [bramka Zigbee]

maniex36 · Post Fri Feb 21, 2025 12:52 pm

Dzięki. Będę próbował.

lukasz06 · Post Fri Feb 21, 2025 7:10 pm

[email protected] wrote: Fri Feb 21, 2025 4:59 am
lukasz06 wrote: Thu Feb 20, 2025 10:43 pm
bokk wrote: Thu Feb 20, 2025 8:45 am Siła sygnału - węzeł mostu pokazuje cały czas 100% pomimo zmiany lokalizacji czujnika temperatury. Nawet za 3 ścianami i stropem nie zmieniło wskazania
U mnie to samo, ciekawe
Złap logi z momentu jak nowa wartość przychodzi do bramki to się okaże co przychodzi z urządzenia

Takie logi mi wypluwa

Code: Select all

[ 60001][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[ 60002][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[ 60003][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[ 60004][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
Send: [53 55 50 4C 41 17 0A 00 00 00 28 00 00 00 10 00 00 00 BE DA B8 67 00 00 00 00 1F 6B 0E 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 0C 00 00 00 32 00 00 00 10 00 00 00 AF CC B8 67 00 00 00 00 02 5A 09 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 0B 00 00 00 28 00 00 00 10 00 00 00 D7 DA B8 67 00 00 00 00 A5 7E 0E 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 0D 00 00 00 32 00 00 00 10 00 00 00 C8 CC B8 67 00 00 00 00 C8 43 09 00 00 00 00 00 53 55 50 4C 41 ]
[120005][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[120005][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[120006][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[120007][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[120007][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
Send: [53 55 50 4C 41 17 0C 00 00 00 28 00 00 00 10 00 00 00 F0 DA B8 67 00 00 00 00 88 8F 0E 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 0E 00 00 00 32 00 00 00 10 00 00 00 E1 CC B8 67 00 00 00 00 84 82 09 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 0D 00 00 00 28 00 00 00 10 00 00 00 09 DB B8 67 00 00 00 00 E9 9D 0E 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 0F 00 00 00 32 00 00 00 10 00 00 00 FA CC B8 67 00 00 00 00 7A C6 08 00 00 00 00 00 53 55 50 4C 41 ]
[160909][V][ZigbeeCore.cpp:372] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[160928][I][ZigbeeCore.cpp:325] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x058c)
[160929][V][ZigbeeCore.cpp:329] esp_zb_app_signal_handler(): Device capabilities: 0x80
[160929][D][ZigbeeCore.cpp:346] esp_zb_app_signal_handler(): Device already bound to endpoint 1
[160935][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[160935][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x1)
[160936][I][ZigbeeGateway.cpp:599] zbAttributeReporting(): zbAttributeReporting power config cluster (0x1), attribute id (0x20), attribute data type (0x20)
[160937][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x1), attribute id (0x20), attribute data type (0x20)
[160941][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[160941][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x1)
[160942][I][ZigbeeGateway.cpp:596] zbAttributeReporting(): zbAttributeReporting power config battery percentage remaining 152
[160943][I][z2s_devices_table.cpp:448] Z2S_onBatteryPercentageReceive(): onBatteryPercentageReceive 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1
[160943][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xffffffff
[160944][I][z2s_devices_table.cpp:83] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xffffffff
[160945][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x1), attribute id (0x21), attribute data type (0x20)
[160948][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[160948][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x402)
[160949][I][ZigbeeGateway.cpp:509] zbAttributeReporting(): zbAttributeReporting temperature measurement 20.559999
[160950][I][z2s_devices_table.cpp:258] Z2S_onTemperatureReceive(): onTemperatureReceive 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1
[160950][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xbde
[160951][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x402), attribute id (0x0), attribute data type (0x29)
[160954][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[160954][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x405)
[160955][I][ZigbeeGateway.cpp:518] zbAttributeReporting(): zbAttributeReporting humidity measurement 38.740002
[160956][I][z2s_devices_table.cpp:277] Z2S_onHumidityReceive(): onHumidityReceive 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1
[160956][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xbde
[160957][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x405), attribute id (0x0), attribute data type (0x21)
Channel(0) value changed to temp(20.56), humi(38.74)
Send: [53 55 50 4C 41 17 0E 00 00 00 67 00 00 00 0E 00 00 00 00 00 00 00 00 00 4F 50 00 00 54 97 00 00 ]
Send: [53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 0F 00 00 00 28 00 00 00 10 00 00 00 23 DB B8 67 00 00 00 00 7E 5D 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 10 00 00 00 32 00 00 00 10 00 00 00 13 CD B8 67 00 00 00 00 E9 1D 0A 00 00 00 00 00 53 55 50 4C 41 ]
[180009][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(YES)
[180009][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[180010][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[180011][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[180011][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[184547][I][ZigbeeCore.cpp:358] esp_zb_app_signal_handler(): Network(0xdbbc) closed, devices joining not allowed.
Send: [53 55 50 4C 41 17 10 00 00 00 28 00 00 00 10 00 00 00 3C DB B8 67 00 00 00 00 2B 6E 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 11 00 00 00 32 00 00 00 10 00 00 00 2C CD B8 67 00 00 00 00 01 F0 09 00 00 00 00 00 53 55 50 4C 41 ]
[210964][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[210965][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x402)
[210966][I][ZigbeeGateway.cpp:509] zbAttributeReporting(): zbAttributeReporting temperature measurement 20.700001
[210966][I][z2s_devices_table.cpp:258] Z2S_onTemperatureReceive(): onTemperatureReceive 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1
[210967][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xbde
[210968][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x402), attribute id (0x0), attribute data type (0x29)
[210971][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[210971][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x405)
[210972][I][ZigbeeGateway.cpp:518] zbAttributeReporting(): zbAttributeReporting humidity measurement 41.160000
[210972][I][z2s_devices_table.cpp:277] Z2S_onHumidityReceive(): onHumidityReceive 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1
[210973][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xbde
[210974][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x405), attribute id (0x0), attribute data type (0x21)
Channel(0) value changed to temp(20.70), humi(41.16)
Send: [53 55 50 4C 41 17 11 00 00 00 67 00 00 00 0E 00 00 00 00 00 00 00 00 00 DC 50 00 00 C7 A0 00 00 ]
Send: [53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 12 00 00 00 28 00 00 00 10 00 00 00 55 DB B8 67 00 00 00 00 53 86 01 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 12 00 00 00 32 00 00 00 10 00 00 00 45 CD B8 67 00 00 00 00 E9 47 0B 00 00 00 00 00 53 55 50 4C 41 ]
[240013][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(YES)
[240013][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[240014][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[240015][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[240016][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[250948][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[250949][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x402)
[250950][I][ZigbeeGateway.cpp:509] zbAttributeReporting(): zbAttributeReporting temperature measurement 21.030001
[250950][I][z2s_devices_table.cpp:258] Z2S_onTemperatureReceive(): onTemperatureReceive 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1
[250951][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xbde
[250952][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x402), attribute id (0x0), attribute data type (0x29)
[250954][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[250955][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x58c) src endpoint(1) to dst endpoint(1) cluster(0x405)
[250956][I][ZigbeeGateway.cpp:518] zbAttributeReporting(): zbAttributeReporting humidity measurement 40.410000
[250956][I][z2s_devices_table.cpp:277] Z2S_onHumidityReceive(): onHumidityReceive 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1
[250957][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xfc:0x3b:0x53:0x9:0x40, endpoint 0x1, channel type 0xbde
[250958][I][ZigbeeGateway.cpp:608] zbAttributeReporting(): zbAttributeReporting from (0x940), endpoint (1), cluster (0x405), attribute id (0x0), attribute data type (0x21)
Send: [53 55 50 4C 41 17 13 00 00 00 28 00 00 00 10 00 00 00 6E DB B8 67 00 00 00 00 26 96 01 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 13 00 00 00 32 00 00 00 10 00 00 00 5E CD B8 67 00 00 00 00 CF 16 0B 00 00 00 00 00 53 55 50 4C 41 ]
Channel(0) value changed to temp(21.03), humi(40.41)
Send: [53 55 50 4C 41 17 14 00 00 00 67 00 00 00 0E 00 00 00 00 00 00 00 00 00 26 52 00 00 D9 9D 00 00 ]
Send: [53 55 50 4C 41 ]
[269919][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1031) callback
[269920][V][ZigbeeHandlers.cpp:294] zb_cmd_ias_zone_status_change_handler(): IAS Zone Status Notification: from address(0xa668) src endpoint(1) to dst endpoint(1) cluster(0x500), zone status (0x1), extended status (0x0), zone id (0xff), delay (0x0)
[269921][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xd1:0x7f:0x45:0xef:0xf6, endpoint 0x1, channel type 0x3e8
[269924][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[269925][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa668) src endpoint(1) to dst endpoint(1) cluster(0x500)
[269926][I][ZigbeeGateway.cpp:604] zbAttributeReporting(): zbAttributeReporting IAS zone status 1
[269926][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xd1:0x7f:0x45:0xef:0xf6, endpoint 0x1, channel type 0x3e8
Channel(1) value changed to 0
Send: [53 55 50 4C 41 17 15 00 00 00 67 00 00 00 0E 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Wrote 1 bytes to storage at 15
Wrote 7 bytes to storage at 8
Commit
Send: [53 55 50 4C 41 17 16 00 00 00 28 00 00 00 10 00 00 00 87 DB B8 67 00 00 00 00 AC A7 02 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 14 00 00 00 32 00 00 00 10 00 00 00 77 CD B8 67 00 00 00 00 D4 6D 0C 00 00 00 00 00 53 55 50 4C 41 ]
[300017][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(YES)
[300017][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[300018][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[300019][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[300019][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
Send: [53 55 50 4C 41 17 17 00 00 00 E0 01 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 15 00 00 00 EA 01 00 00 1A 00 00 00 E9 07 02 15 06 14 01 24 0E 00 00 00 45 75 72 6F 70 65 2F 57 61 72 73 61 77 00 53 55 50 4C 41 ]
Clock: current time: 2025-02-21 20:01:35
Clock: time diff (system-new): -1 s
Clock: new time: 2025-02-21 20:01:36
[322753][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1031) callback
[322753][V][ZigbeeHandlers.cpp:294] zb_cmd_ias_zone_status_change_handler(): IAS Zone Status Notification: from address(0xa668) src endpoint(1) to dst endpoint(1) cluster(0x500), zone status (0x0), extended status (0x0), zone id (0xff), delay (0x0)
[322755][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xd1:0x7f:0x45:0xef:0xf6, endpoint 0x1, channel type 0x3e8
[322758][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[322758][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa668) src endpoint(1) to dst endpoint(1) cluster(0x500)
[322759][I][ZigbeeGateway.cpp:604] zbAttributeReporting(): zbAttributeReporting IAS zone status 0
[322760][I][z2s_devices_table.cpp:62] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0xd1:0x7f:0x45:0xef:0xf6, endpoint 0x1, channel type 0x3e8
Channel(1) value changed to 1
Send: [53 55 50 4C 41 17 18 00 00 00 67 00 00 00 0E 00 00 00 01 00 00 00 00 00 01 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Wrote 1 bytes to storage at 15
Wrote 7 bytes to storage at 8
Commit
Send: [53 55 50 4C 41 17 19 00 00 00 28 00 00 00 10 00 00 00 B8 DB B8 67 00 00 00 00 EF 3D 0F 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 16 00 00 00 32 00 00 00 10 00 00 00 A9 CD B8 67 00 00 00 00 6E CD 07 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 1A 00 00 00 28 00 00 00 10 00 00 00 D2 DB B8 67 00 00 00 00 3E 0F 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 17 00 00 00 32 00 00 00 10 00 00 00 C2 CD B8 67 00 00 00 00 C6 E0 07 00 00 00 00 00 53 55 50 4C 41 ]
[360021][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(YES)
[360021][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[360022][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[360023][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[360023][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
Send: [53 55 50 4C 41 17 1B 00 00 00 28 00 00 00 10 00 00 00 EB DB B8 67 00 00 00 00 C9 22 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 18 00 00 00 32 00 00 00 10 00 00 00 DB CD B8 67 00 00 00 00 78 9E 08 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 1C 00 00 00 28 00 00 00 10 00 00 00 04 DC B8 67 00 00 00 00 5F 32 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 19 00 00 00 32 00 00 00 10 00 00 00 F4 CD B8 67 00 00 00 00 84 74 08 00 00 00 00 00 53 55 50 4C 41 ]
[420025][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(YES)
[420025][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[420026][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[420027][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[420027][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
Send: [53 55 50 4C 41 17 1D 00 00 00 28 00 00 00 10 00 00 00 1D DC B8 67 00 00 00 00 07 42 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 1A 00 00 00 32 00 00 00 10 00 00 00 0D CE B8 67 00 00 00 00 F7 3D 08 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 1E 00 00 00 28 00 00 00 10 00 00 00 36 DC B8 67 00 00 00 00 A6 51 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 1B 00 00 00 32 00 00 00 10 00 00 00 26 CE B8 67 00 00 00 00 6C 28 08 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 1F 00 00 00 28 00 00 00 10 00 00 00 4F DC B8 67 00 00 00 00 37 65 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 1C 00 00 00 32 00 00 00 10 00 00 00 3F CE B8 67 00 00 00 00 69 38 08 00 00 00 00 00 53 55 50 4C 41 ]
[480029][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(YES)
[480029][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[480030][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[480031][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[480032][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
Send: [53 55 50 4C 41 17 20 00 00 00 28 00 00 00 10 00 00 00 68 DC B8 67 00 00 00 00 9E 7C 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 1D 00 00 00 32 00 00 00 10 00 00 00 58 CE B8 67 00 00 00 00 A9 4E 08 00 00 00 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 21 00 00 00 28 00 00 00 10 00 00 00 81 DC B8 67 00 00 00 00 0C 94 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 1E 00 00 00 32 00 00 00 10 00 00 00 71 CE B8 67 00 00 00 00 ED 8E 0A 00 00 00 00 00 53 55 50 4C 41 ]
[540033][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(YES)
[540033][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[540034][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0x58c), model id(0x1001), rejoined(NO)
[540035][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)
[540035][I][Z2S_Gateway.ino:245] loop(): Device on endpoint(0x1), short address(0xa668), model id(0x2000), rejoined(NO)

[email protected] · Post Fri Feb 21, 2025 7:28 pm

@lukasz06
No i się wyjaśniło ...
Z racji że cześć urządzeń jest Tuya to są odpytywane a nie same przysyłają dane , ale to ma konsekwencje w formacie wymienianej wiadomości , a ta nie posiada nagłówka z rssi ...
Więc dla niektórych urządzeń tej informacji nie ma i ja nie wiem jak by miała się tam znaleźć. Ustawiane jest zero które po przeliczeniu odpowiada 100 % zasięgu

lukasz06 · Post Fri Feb 21, 2025 7:47 pm

No czujnik otwarcia okna jest tuya, ale czujnik temperatury to już nie. To jest twardy orzech do zgryzienia

[email protected] · Post Fri Feb 21, 2025 7:51 pm

Idea Zigbee jest piękna ale wykonanie jak widać , może vajera coś wie więcej , ale trzeba brać pod uwagę że pewnie nie wszystko się będzie dało zrobić tak samo

lukasz06 · Post Fri Feb 21, 2025 8:11 pm

To pozostaje liczyć na niego, może znajdzie jakieś rozwiązanie

Zibi_007 · Post Fri Feb 21, 2025 8:28 pm

To może i ja dołożę swoje "trzy grosze". Z moich obserwacji wynika, że w niektórych urządzeniach nawet pod Tuya trudno jest uzyskać wiarygodne informacje o poziomie sygnału. Ba, z niektórych jest to w normalnych warunkach nie do wyciągnięcia. Może się to udać na samym początku, przy dodawaniu urządzenia do oryginalnej bramki, a później wcale lub trzeba kombinować. Taki np. czujnik zalania trzeba wzbudzić i w tym momencie w informacjach o urządzeniu włączyć procedurę sprawdzania sieci. Jest to niewygodne i czasami się po prostu nie udaje. Czasami też pojawia się komunikat o słabym zasięgu (i tylko tyle). Myślę, że to może dotyczyć wielu urządzeń przechodzących w stan uśpienia w celu oszczędzania energii. Jeśli się to uda pod Suplą z części wyciągnąć, to i tak będzie sukces.

klew · Post Fri Feb 21, 2025 9:23 pm

RSSI to "moc sygnału odbieranego". Przy komunikacji dwukierunkowej zawsze są dwa parametry RSSI. Jeden z punktu widzenia ESP i drugi z puntu widzenia urządzenia ZigBee. Nawet jeśli one nie wysyłają informacji o poziomie RSSI z ich punktu widzenia, to na ESP mamy radio, które odbiera komunikaty i to RSSI zawsze powinno być znane (bo nie zależy od tego co nadaje urządzenie ZigBee).

W urządzeniach Supli:
1. RSSI dla Wi-Fi zawsze dotyczy sygnału z routera, który jest odbierany przez urządzenie
2. Na Boxie jest to RSSI też z punktu widzenia Boxa.

Także pewnie ten RSSI z punktu widzenia radia na ESP też jest gdzieś dostępny i to byłoby niezależne od tego co urządzenie na ZigBee sobie wysyła.

Albert · Post Sat Feb 22, 2025 12:04 pm

Hmm .. ten kontaktron działa słabo. Rzadko kiedy pokazuje właściwy stan. Esp jest jakieś 3m obok. Podrzucicie foty jakie macie czujniki, które sprawnie działają?

Zibi_007 · Post Sat Feb 22, 2025 12:30 pm

Albert wrote: Sat Feb 22, 2025 12:04 pm Hmm .. ten kontaktron działa słabo. Rzadko kiedy pokazuje właściwy stan. Esp jest jakieś 3m obok. Podrzucicie foty jakie macie czujniki, które sprawnie działają?

Mam identyczny z wyglądu, taki https://pl.aliexpress.com/item/1005006876002235.html
Działa idealnie. Może tylko tyle, że zamontowany jest tak, jak na tych zdjęciach z aukcji, czyli bokami do siebie. Stan odczytuje bez opóźnień. Sam byłem zdziwiony, jak dobrze działa. U mnie przedstawia się jako _TZ3000_au1rjicn::TS0203.