Zgłoszenia błędów [bramka ZigBee]

Moderator: vajera

LukiSpajder
Posts: 1548
Joined: Tue Aug 18, 2020 2:22 pm
Has thanked: 25 times
Been thanked: 34 times

Post

Coś się pojawia przy tym kanale , nawiasy kwadratowe . Najnowszy bin,
To może info z clouda że mieści się 0 - 5 liczb ?
You do not have the required permissions to view the files attached to this post.
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

LukiSpajder wrote: Wed Feb 19, 2025 7:38 am Coś się pojawia przy tym kanale , nawiasy kwadratowe . Najnowszy bin,
To może info z clouda że mieści się 0 - 5 liczb ?
To akurat błąd 😉 - to GPM od radaru obecności, ale dzięki za info - muszę przejrzeć kod.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
kiler88
Posts: 339
Joined: Sun Jun 21, 2020 10:55 am
Been thanked: 1 time

Post

LukiSpajder wrote: Wed Feb 19, 2025 7:38 am Coś się pojawia przy tym kanale , nawiasy kwadratowe . Najnowszy bin,
To może info z clouda że mieści się 0 - 5 liczb ?
Pewnie zła jednostka podawana przy tworzeniu kanału, możesz to zmienić na LUX w cloud.
Top
kiler88
Posts: 339
Joined: Sun Jun 21, 2020 10:55 am
Been thanked: 1 time

Post

U mnie przy restarcie bramki spowodowanym usuwaniem urządzeń ustawiają się odwrotne stany kanałów, zarówno przy czujnikach z odwróconą logiką jak i bez, przy normalnym restarcie tak się nie dzieje. Po zmianie stanu, albo wymuszeniu komunikacji przyciskiem wraca do normy dany kanał.
Top
User avatar
Robert Błaszczak
Posts: 5222
Joined: Sat Dec 22, 2018 8:55 pm
Location: Zielona Góra
Has thanked: 37 times
Been thanked: 27 times

Post

vajera wrote: Tue Feb 18, 2025 8:41 pm
Robert Błaszczak wrote: Mon Feb 17, 2025 6:34 pm Łukasz, czujnik otwarcia się bez problemu dodaje do bramki, jednak brak jest reakcji na magnes. Przed dodaniem czujnik wysyła informację przy zbliżaniu i oddalaniu magnesu. Widać to w załączonym pełnym logu (linie 258 - 260). Wrzucam log od procedury rejestracji czujnika.

Ps. Bramka z tym czujnikiem po kilkunastu minutach staje się nieaktywna w Cloud.
Wypróbuj jeszcze ostatni bin/kod 0.1.8-18/02/2025.
Niestety nie działa. Odpuszczam sobie te czujniki bo jest z nimi jakiś dziwny problem.

Ps.
Łukasz, jeśli chcesz, to mogę Ci podesłać 2 szt. na testy. Jakby co to wrzuć na priv nr paczkomatu, e-mail i nr telefonu.
Pozdrawiam
Robert Błaszczak

Moja prywatna strona: www.blaszczak.pl
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

kiler88 wrote: Wed Feb 19, 2025 8:01 am
LukiSpajder wrote: Wed Feb 19, 2025 7:38 am Coś się pojawia przy tym kanale , nawiasy kwadratowe . Najnowszy bin,
To może info z clouda że mieści się 0 - 5 liczb ?
Pewnie zła jednostka podawana przy tworzeniu kanału, możesz to zmienić na LUX w cloud.
A gdzie tam - szkolny błąd :D
Plik z2s_devices_table.cpp - linie 214 i 217...
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Robert Błaszczak wrote: Wed Feb 19, 2025 8:07 am
Łukasz, jeśli chcesz, to mogę Ci podesłać 2 szt. na testy. Jakby co to wrzuć na priv nr paczkomatu, e-mail i nr telefonu.
Historia w skrócie:
  • Najpierw znalazłem informację, że one nie działają na klastrze IAS (0x500) a na OnOff (0x06) - zmieniłem bindingi - nie pomogło,
  • Później wygrzebałem w sieci jakieś wzmianki o aktywacji kodem Xiaomi, znalazłem w końcu custom cluster Lumi 0xFCC0 i atrybut o nazwie mode (0x0009) równy 0x0, który nadpisałem 0x01 - nie pomogło,
  • podjąłem jeszcze jedną próbę - tym razem zapisując powyższy atrybut z tzw. manufacturer code LUMI_UNITED_TECHOLOGY_LTD_SHENZHEN = 0x115f - i wtedy poszło ;)
Jeżeli masz jeszcze te czujniki to wypróbuj je, proszę - jak chcesz mogę Ci odesłać te Twoje?
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

Code: Select all

n file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_iaszone.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_iaszone.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
"C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp-rv32\\2405/bin/riscv32-esp-elf-g++" -MMD -c "@C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/flags/cpp_flags" -Os -Werror=return-type -DF_CPU=160000000L -DARDUINO=10607 -DARDUINO_ESP32C6_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32C6_DEV\"" "-DARDUINO_VARIANT=\"esp32c6\"" -DARDUINO_PARTITION_custom_zigbee_zczr "-DARDUINO_HOST_OS=\"windows\"" "-DARDUINO_FQBN=\"esp32:esp32:esp32c6:UploadSpeed=921600,CDCOnBoot=cdc,CPUFreq=160,FlashFreq=80,FlashMode=qio,FlashSize=4M,PartitionScheme=custom,DebugLevel=verbose,EraseFlash=all,JTAGAdapter=default,ZigbeeMode=zczr\"" -DESP32=ESP32 -DCORE_DEBUG_LEVEL=5 -DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DZIGBEE_MODE_ZCZR "@C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/flags/defines" "-IC:\\Users\\Jacek\\Documents\\Arduino\\libraries\\Z2S_Library\\examples\\Z2S_Gateway" -iprefix "C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/include/" "@C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/flags/includes" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/qio_qspi/include" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\cores\\esp32" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\variants\\esp32c6" "-Ic:\\Users\\Jacek\\Documents\\Arduino\\libraries\\Z2S_Library\\src" "-Ic:\\Users\\Jacek\\Documents\\Arduino\\libraries\\SuplaDevice\\src" "-Ic:\\Users\\Jacek\\Documents\\Arduino\\libraries\\priv_auth_data.h" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\WiFi\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\Network\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\WebServer\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\FS\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\HTTPUpdateServer\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\SPIFFS\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\Update\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\NetworkClientSecure\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\EEPROM\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\LittleFS\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\Ticker\\src" "@C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834/build_opt.h" "@C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834/file_opts" "C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834\\sketch\\z2s_device_rgb.cpp" -o "C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834\\sketch\\z2s_device_rgb.cpp.o"
In file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_dimmer.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_dimmer.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
In file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_electricity_meter.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_electricity_meter.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
In file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_rgb.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_rgb.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
Co tu sie stało?
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

lukasz06 wrote: Sat Feb 22, 2025 8:53 am

Code: Select all

n file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_iaszone.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_iaszone.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
"C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp-rv32\\2405/bin/riscv32-esp-elf-g++" -MMD -c "@C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/flags/cpp_flags" -Os -Werror=return-type -DF_CPU=160000000L -DARDUINO=10607 -DARDUINO_ESP32C6_DEV -DARDUINO_ARCH_ESP32 "-DARDUINO_BOARD=\"ESP32C6_DEV\"" "-DARDUINO_VARIANT=\"esp32c6\"" -DARDUINO_PARTITION_custom_zigbee_zczr "-DARDUINO_HOST_OS=\"windows\"" "-DARDUINO_FQBN=\"esp32:esp32:esp32c6:UploadSpeed=921600,CDCOnBoot=cdc,CPUFreq=160,FlashFreq=80,FlashMode=qio,FlashSize=4M,PartitionScheme=custom,DebugLevel=verbose,EraseFlash=all,JTAGAdapter=default,ZigbeeMode=zczr\"" -DESP32=ESP32 -DCORE_DEBUG_LEVEL=5 -DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1 -DZIGBEE_MODE_ZCZR "@C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/flags/defines" "-IC:\\Users\\Jacek\\Documents\\Arduino\\libraries\\Z2S_Library\\examples\\Z2S_Gateway" -iprefix "C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/include/" "@C:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/flags/includes" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\tools\\esp32-arduino-libs\\idf-release_v5.3-cfea4f7c-v1\\esp32c6/qio_qspi/include" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\cores\\esp32" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\variants\\esp32c6" "-Ic:\\Users\\Jacek\\Documents\\Arduino\\libraries\\Z2S_Library\\src" "-Ic:\\Users\\Jacek\\Documents\\Arduino\\libraries\\SuplaDevice\\src" "-Ic:\\Users\\Jacek\\Documents\\Arduino\\libraries\\priv_auth_data.h" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\WiFi\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\Network\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\WebServer\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\FS\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\HTTPUpdateServer\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\SPIFFS\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\Update\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\NetworkClientSecure\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\EEPROM\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\LittleFS\\src" "-IC:\\Users\\Jacek\\AppData\\Local\\Arduino15\\packages\\esp32\\hardware\\esp32\\3.1.1\\libraries\\Ticker\\src" "@C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834/build_opt.h" "@C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834/file_opts" "C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834\\sketch\\z2s_device_rgb.cpp" -o "C:\\Users\\Jacek\\AppData\\Local\\arduino\\sketches\\E933CE886DD80CE7D55059184D728834\\sketch\\z2s_device_rgb.cpp.o"
In file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_dimmer.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_dimmer.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
In file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_electricity_meter.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_electricity_meter.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
In file included from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_devices_table.h:6,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_rgb.h:4,
                 from C:\Users\Jacek\Documents\Arduino\libraries\Z2S_Library\examples\Z2S_Gateway\z2s_device_rgb.cpp:1:
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:777:8: note: in expansion of macro 'GUID'
  777 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:944:8: note: in expansion of macro 'GUID'
  944 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:959:8: note: in expansion of macro 'GUID'
  959 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:977:8: note: in expansion of macro 'GUID'
  977 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:995:8: note: in expansion of macro 'GUID'
  995 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1017:8: note: in expansion of macro 'GUID'
 1017 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1037:8: note: in expansion of macro 'GUID'
 1037 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1059:8: note: in expansion of macro 'GUID'
 1059 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1605:8: note: in expansion of macro 'GUID'
 1605 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1642:8: note: in expansion of macro 'GUID'
 1642 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1653:8: note: in expansion of macro 'GUID'
 1653 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1666:8: note: in expansion of macro 'GUID'
 1666 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
c:\Users\Jacek\Documents\Arduino\libraries\priv_auth_data.h/priv_auth_data.h:1:14: error: expected unqualified-id before string constant
    1 | #define GUID "{0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B}"
      |              ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c:\Users\Jacek\Documents\Arduino\libraries\SuplaDevice\src/supla-common/proto.h:1680:8: note: in expansion of macro 'GUID'
 1680 |   char GUID[SUPLA_GUID_SIZE];
      |        ^~~~
Co tu sie stało?
Zrób tak:

Code: Select all

const static char GUID[SUPLA_GUID_SIZE] PROGMEM = {0x7E,0x6F,0xAB,0xDB,0x38,0x1C,0x6F,0xF0,0xCE,0x56,0x07,0xB9,0xD0,0xF3,0x8F,0x7B};
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
Yepestis
Posts: 890
Joined: Mon Sep 24, 2018 6:08 pm
Location: Wrocław
Has thanked: 19 times
Been thanked: 3 times

Post

vajera wrote: Sat Feb 22, 2025 11:11 am Wersja 0.2.5-22/02/2025
  • Dodałem nowe urządzenia,
  • UWAGA - przeprowadziłem bardzo dużą restrukturyzację kodu - bez tego dodawanie nowych funkcjonalności byłoby coraz trudniejsze i podatne na błędy. Przy tak dużej przebudowie kodu istnieje ryzyko zepsucia już istniejących funkcjonalności - dołożyłem wszelkich starań żeby to ryzyko zminimalizować, przeprowadziłem też testy na posiadanych urządzeniach Zigbee, ale nie mam możliwości sprawdzenia wszystkich dodanych już urządzeń. Stąd moja prośba, zwłaszcza do posiadaczy urządzeń opartych o Tuya cluster 0xEF00 (czujniki gleby, dymu, obecności, niestandardowe czujniki oświetlenia lub temperatury), o weryfikację działania swoich urządzeń i zgłaszanie błędów/nieprawidłowości.
    Pomimo zmian w kodzie nadal możliwe jest wgranie mniejszego pliku bin bez utraty ustawień Supla/Zigbee
Po aktualizacji czujniki gleby działa prawidłowo
Top

Return to “Bramka ZigBee”