+BWNUandras wrote: Tue Mar 11, 2025 11:50 am Proszę o dodanie przełącznika 2 dotykowego :
https://pl.aliexpress.com/item/10050075 ... 00254481_2
_TZ3000_xk5udnd6::TS0012
Gniazdka, rolety, włączniki, mierniki elektryczne - zgłoszenia, uwagi, pomysły [bramka ZigBee]
Moderator: vajera
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
+BWNUandras wrote: Wed Mar 12, 2025 1:06 pm Proszę o dodanie przełącznika gniazdka na 3 USB :
https://pl.aliexpress.com/item/10050074 ... ry_from%3A
_TZ3000_mw1pqqqt TS0003
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
adamdd1
- Posts: 25
- Joined: Sun Jun 02, 2019 8:11 pm
Proszę o dodanie MINI Smart Switcha
Code: Select all
[/[ 1][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Dein Info:
---------- --------------------------------
GPIO : BUS_TYPE[bus/unit][chan]
------------- -------------------------
9 : GPIO
12 : USB_DM
13 : USB_DP
16 : U ART_TX[0]
17 : UART_RX[0]
============ After Setup End =============
[ 59601][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 59603][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[ 59626][I][ZigbeeCore.cpp:354] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x3578)
[ 59627][V][ZigbeeCore.cpp:358] esp_zb_app_signal_handler(): Device capabilities: 0x8e
[ 59627][D][ZigbeeGateway.cpp:471] zbDeviceAnnce(): zbDeviceAnnce short address (0x3578), ieee_addr (0xa4):(0xc1):(0x38):(0x24):(0xdf):(0x26):(0x2d):(0x52)
[ 59628][D][ZigbeeGateway.cpp:474] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x3578), ieee_addr (0xa4):(0xc1):(0x38):(0x24):(0xdf):(0x26):(0x2d):(0x52)
[ 59629][I][ZigbeeGateway.cpp:498] zbDeviceAnnce(): Tuya magic last hope
[ 59832][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 59832][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 59833][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x8001), attribute data type (0x30)
[ 59834][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x8001), attribute data type (0x30)
[ 59864][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 59865][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 59866][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[ 59866][I][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_skueekg3"
[ 59867][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[ 59867][I][ZigbeeGateway.cpp:355] zbReadBasicCluster(): ZCL version id is "3"
[ 59868][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(65)
[ 59869][I][ZigbeeGateway.cpp:361] zbReadBasicCluster(): ZCL application version id is "65"
[ 59869][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[ 59870][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "TS000F"
[ 59870][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(1)
[ 59871][I][ZigbeeGateway.cpp:367] zbReadBasicCluster(): ZCL power source id is "1"
[ 59871][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(134), cluster(0x0), attribute(0xfffe), type(0x0), value(0)
[ 59891][I][ZigbeeGateway.cpp:541] printJoinedDevices(): joined devices:
[ 59891][I][ZigbeeGateway.cpp:544] printJoinedDevices(): Device on endpoint 1, short address: 0x3578
[ 59912][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 59912][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x3578), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0x81
[ 59913][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 59914][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1[0x0]
[ 60292][I][ZigbeeGateway.cpp:309] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 60313][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 60313][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 60314][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[ 60315][I][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_skueekg3"
[ 60792][I][ZigbeeGateway.cpp:315] zbQueryDeviceBasicCluster(): basic tsn 0x2
[ 60792][I][ZigbeeGateway.cpp:309] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[ 60813][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 60814][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 60815][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[ 60815][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "TS000F"
[ 60883][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[ 60904][I][ZigbeeCore.cpp:386] esp_zb_app_signal_handler(): Network(0x6bd8) is open for 180 seconds
[ 61293][I][ZigbeeGateway.cpp:315] zbQueryDeviceBasicCluster(): basic tsn 0x3
[ 61293][I][ZigbeeGateway.cpp:993] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[ 61314][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1001) callback
[ 61315][V][ZigbeeHandlers.cpp:187] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 61315][V][ZigbeeHandlers.cpp:194] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0x0), attribute(0xffde)
[ 61794][I][ZigbeeGateway.cpp:271] zbPrintDeviceDiscovery(): short_addr_req 13688
[ 61813][I][ZigbeeGateway.cpp:205] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 13688, endpoints count 2
[ 61813][I][ZigbeeGateway.cpp:208] Z2S_active_ep_req_cb(): Endpont # 1, id 1
[ 61814][I][ZigbeeGateway.cpp:208] Z2S_active_ep_req_cb(): Endpont # 2, id 242
[ 61838][I][ZigbeeGateway.cpp:224] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 13688, endpoint # 1
[ 61839][I][ZigbeeGateway.cpp:225] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 8, out clusters # 1
[ 61839][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 1, id 0
[ 61840][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 2, id 3
[ 61840][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 3, id 4
[ 61840][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 4, id 5
[ 61841][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 5, id 6
[ 61841][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 6, id 10
[ 61842][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 7, id 57344
[ 61842][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 8, id 4096
[ 61843][I][ZigbeeGateway.cpp:244] Z2S_simple_desc_req_cb(): Out cluster # 1, id 25
[ 61971][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 61971][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x0), data type (0x20)
[ 61972][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x1), data type (0x20)
[ 61973][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x2), data type (0x20)
[ 61974][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x3), data type (0x20)
[ 61974][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x4), data type (0x42)
[ 61975][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x5), data type (0x42)
[ 61976][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x7), data type (0x30)
[ 61977][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x12), data type (0x10)
[ 61978][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0x4000), data type (0x42)
[ 61979][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x0), attribute id (0xfffd), data type (0x21)
[ 61985][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 61986][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x3), attribute id (0x0), data type (0x21)
[ 61987][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x3), attribute id (0xfffd), data type (0x21)
[ 61994][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 61994][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x4), attribute id (0x0), data type (0x18)
[ 61995][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x4), attribute id (0xfffd), data type (0x21)
[ 62000][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 62001][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x5), attribute id (0x0), data type (0x20)
[ 62002][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x5), attribute id (0x1), data type (0x20)
[ 62003][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x5), attribute id (0x2), data type (0x21)
[ 62003][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x5), attribute id (0x3), data type (0x10)
[ 62004][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x5), attribute id (0x4), data type (0x18)
[ 62005][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x5), attribute id (0xfffd), data type (0x21)
[ 62008][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 62008][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0xe000), attribute id (0xd001), data type (0x48)
[ 62009][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0xe000), attribute id (0xd002), data type (0x48)
[ 62010][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0xe000), attribute id (0xd003), data type (0x42)
[ 62011][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0xe000), attribute id (0xfffd), data type (0x21)
[ 62014][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
[ 62014][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x0), data type (0xf0)
[ 62015][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x1), data type (0x23)
[ 62016][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x2), data type (0x23)
[ 62017][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x3), data type (0x21)
[ 62018][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x4), data type (0x23)
[ 62018][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x5), data type (0x21)
[ 62019][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x6), data type (0x30)
[ 62020][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x7), data type (0x21)
[ 62021][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x8), data type (0x21)
[ 62022][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0x9), data type (0x21)
[ 62023][I][ZigbeeGateway.cpp:716] zbCmdDiscAttrResponse(): Attribute Discovery Message - device address (0x3578), source endpoint (0x1), source cluster (0x19), attribute id (0xfffd), data type (0x21)
[ 62916][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[ 62917][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 62917][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 62918][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[ 62918][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 5 size: 2
[ 62919][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[ 62919][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[ 62919][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x3578, 0x3578, 0x0, 0x0
[ 62920][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[ 76017][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 76017][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 76018][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[ 76018][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[ 76197][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 76197][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 76198][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x8000), attribute data type (0x10)
[ 76198][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x8000), attribute data type (0x10)
[ 76424][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 76424][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 76425][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x8001), attribute data type (0x30)
[ 76426][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x8001), attribute data type (0x30)
[ 76585][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 76586][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 76587][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x8002), attribute data type (0x30)
[ 76587][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x8002), attribute data type (0x30)
[ 76712][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 76712][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 76713][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0xe001), attribute id (0xd030), attribute data type (0x30)
[ 77135][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 77136][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0xe000)
[ 77136][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0xe000), attribute id (0xd003), attribute data type (0x42)
[ 77282][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 77282][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 77283][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4001), attribute data type (0x21)
[ 77284][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x4001), attribute data type (0x21)
[ 77440][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 77440][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 77441][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4002), attribute data type (0x21)
[ 77441][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x4002), attribute data type (0x21)
[ 77917][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[ 77917][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 77917][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 77918][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[ 77918][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 7 size: 2
[ 77919][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[ 77919][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[ 77919][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x3578, 0x3578, 0x0, 0x0
[ 77920][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[240905][I][ZigbeeCore.cpp:388] esp_zb_app_signal_handler(): Network(0x6bd8) closed, devices joining not allowed.
[376418][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[376419][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[376419][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[376420][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[377911][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[377911][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[377912][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[377912][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[377913][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 10 size: 2
[377913][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[377913][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[377914][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x3578, 0x3578, 0x0, 0x0
[377914][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[676537][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[676537][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[676538][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[676539][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[677905][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[677905][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[677906][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[677906][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[677907][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 11 size: 2
[677907][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[677907][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[677907][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x3578, 0x3578, 0x0, 0x0
[677908][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[976652][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[976652][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[976653][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[976653][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[977899][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[977899][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[977900][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[977900][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[977901][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 13 size: 2
[977901][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[977901][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[977902][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x3578, 0x3578, 0x0, 0x0
[977902][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[1276779][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[1276779][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[1276780][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[1276780][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[1277893][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[1277894][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[1277894][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[1277895][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[1277895][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 16 size: 2
[1277895][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[1277896][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[1277896][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x3578, 0x3578, 0x0, 0x0
[1277897][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
NLME Status Indication, status: 0x12
NLME Status Indication, status: 0x12
[1576932][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[1576932][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x3578) src endpoint(1) to dst endpoint(1) cluster(0x6)
[1576933][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[1576933][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x2d52), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[1577887][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[1577888][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[1577888][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[1577889][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[1577889][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 10 size: 2
[1577890][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[1577890][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[1577890][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x3578, 0x3578, 0x0, 0x0
[1577891][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
]-
LukiSpajder
- Posts: 1548
- Joined: Tue Aug 18, 2020 2:22 pm
- Has thanked: 25 times
- Been thanked: 34 times
Proszę o dodanie Moduł przełącznika światła Smart ZigBee-L 2CH
https://pl.aliexpress.com/item/10050060 ... pt=glo2pol
logi ze skanera:
Peer Manufacturer is "_TZ3000_jl7qyupf"
Peer Model is "TS0012"
https://pl.aliexpress.com/item/10050060 ... pt=glo2pol
logi ze skanera:
Peer Manufacturer is "_TZ3000_jl7qyupf"
Peer Model is "TS0012"
Code: Select all
Using 'COM13' as serial port.
Showing logs:
[16:35:26][ 80][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Dein=========== Before Setup Start ===========
[16:35:26]Chip Info:
[16:35:26]------------------------------------------
[16:35:26] Model : ESP32-C6
[16:35:26] Package : 0
[16:35:26] Revision : 0.00
[16:35:26] Cores : 1
[16:35:26] CPU Frequency : 160 MHz
[16:35:26] XTAL Frequency : 40 MHz
[16:35:26] Features Bitfield : 0x00000052
[16:35:26] Embedded Flash : No
[16:35:26] Embedded PSRAM : No
[16:35:26] 2.4GHz WiFi : Yes
[16:35:26] Classic BT : No
[16:35:26] BT Low Energy : Yes
[16:35:26] IEEE 802.15.4 : Yes
[16:35:26]------------------------------------------
[16:35:26]INTERNAL Memory Info:
[16:35:26]------------------------------------------
[16:35:26] Total Size : 394204 B ( 385.0 KB)
[16:35:26] Free Bytes : 350424 B ( 342.2 KB)
[16:35:26] Allocated Bytes : 32204 B ( 31.4 KB)
[16:35:26] Minimum Free Bytes: 345380 B ( 337.3 KB)
[16:35:26] Largest Free Block: 319476 B ( 312.0 KB)
[16:35:26]------------------------------------------
[16:35:26]Flash Info:
[16:35:26]------------------------------------------
[16:35:26] Chip Size : 4194304 B (4 MB)
[16:35:26] Block Size : 65536 B ( 64.0 KB)
[16:35:26] Sector Size : 4096 B ( 4.0 KB)
[16:35:26] Page Size : 256 B ( 0.2 KB)
[16:35:26] Bus Speed : 40 MHz
[16:35:26] Bus Mode : QIO
[16:35:26]------------------------------------------
[16:35:26]Partitions Info:
[16:35:26]------------------------------------------
[16:35:26] nvs : addr: 0x00009000, size: 20.0 KB, type: DATA, subtype: NVS
[16:35:26] otadata : addr: 0x0000E000, size: 8.0 KB, type: DATA, subtype: OTA
[16:35:26] app0 : addr: 0x00010000, size: 2560.0 KB, type: APP, subtype: OTA_0
[16:35:26] spiffs : addr: 0x00290000, size: 1384.0 KB, type: DATA, subtype: SPIFFS
[16:35:26] zb_storage : addr: 0x003EA000, size: 16.0 KB, type: DATA, subtype: FAT
[16:35:26] zb_fct : addr: 0x003EE000, size: 4.0 KB, type: DATA, subtype: FAT
[16:35:26] rcp_fw : addr: 0x003EF000, size: 4.0 KB, type: DATA, subtype: SPIFFS
[16:35:26] coredump : addr: 0x003F0000, size: 64.0 KB, type: DATA, subtype: COREDUMP
[16:35:26]------------------------------------------
[16:35:26]Software Info:
[16:35:26]------------------------------------------
[16:35:26] Compile Date/Time : Mar 10 2025 09:32:48
[16:35:26] Compile Host OS : linux
[16:35:26] ESP-IDF Version : v5.3.2-584-g489d7a2b3a-dirty
[16:35:26] Arduino Version : 3.1.3
[16:35:26]------------------------------------------
[16:35:26]Board Info:
[16:35:26]------------------------------------------
[16:35:26] Arduino Board : ESP32C6_DEV
[16:35:26] Arduino Variant : esp32c6
[16:35:26] Arduino FQBN : esp32:esp32:esp32c6:PartitionScheme=custom,ZigbeeMode=zczr,DebugLevel=verbose,CDCOnBoot=cdc
[16:35:26]============ Before Setup End ============
[16:35:26][ 1721][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x4201023a
[16:35:26][ 1722][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 9 successfully set to type GPIO (1) with bus 0xa
[16:35:26][ 1723][D][ZigbeeCore.cpp:85] addEndpoint(): Endpoint: 1, Device ID: 0x0050
[16:35:26][ 1723][D][ZigbeeCore.cpp:166] zigbeeInit(): Initialize Zigbee stack
[16:35:26][ 1772][D][ZigbeeCore.cpp:173] zigbeeInit(): Register all Zigbee EPs in list
[16:35:26][ 1777][I][ZigbeeCore.cpp:181] zigbeeInit(): List of registered Zigbee EPs:
[16:35:26][ 1777][I][ZigbeeCore.cpp:183] zigbeeInit(): Device type: Home Gateway, Endpoint: 1, Device ID: 0x0050
[16:35:26][ 1791][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: ZDO Config Ready (0x17), status: ESP_FAIL
[16:35:26][ 1792][I][ZigbeeCore.cpp:275] esp_zb_app_signal_handler(): Zigbee stack initialized
[16:35:26][ 1797][I][ZigbeeCore.cpp:388] esp_zb_app_signal_handler(): Network(0xc5a7) closed, devices joining not allowed.
[16:35:26][ 1799][I][ZigbeeCore.cpp:281] esp_zb_app_signal_handler(): Device started up in non factory-reset mode
[16:35:26][ 1799][I][ZigbeeCore.cpp:294] esp_zb_app_signal_handler(): Device rebooted
[16:35:26][ 1800][I][ZigbeeCore.cpp:298] esp_zb_app_signal_handler(): Opening network for joining for 180 seconds
[16:35:26][ 1800][D][ZigbeeCore.cpp:539] searchBindings(): Requesting binding table for address 0x0000
[16:35:26][ 1802][D][ZigbeeCore.cpp:479] bindingTableCb(): Binding table callback for address 0x0000 with status 0
[16:35:26][ 1802][D][ZigbeeCore.cpp:482] bindingTableCb(): Binding table info: total 0, index 0, count 0
[16:35:26][ 1803][D][ZigbeeCore.cpp:485] bindingTableCb(): No binding table entries found
[16:35:26]=========== After Setup Start ============
[16:35:26]INTERNAL Memory Info:
[16:35:26]------------------------------------------
[16:35:26] Total Size : 394204 B ( 385.0 KB)
[16:35:26] Free Bytes : 275940 B ( 269.5 KB)
[16:35:26] Allocated Bytes : 107808 B ( 105.3 KB)
[16:35:26] Minimum Free Bytes: 271416 B ( 265.1 KB)
[16:35:26] Largest Free Block: 245748 B ( 240.0 KB)
[16:35:26]------------------------------------------
[16:35:26]GPIO Info:
[16:35:26]------------------------------------------
[16:35:26] GPIO : BUS_TYPE[bus/unit][chan]
[16:35:26] --------------------------------------
[16:35:26] 9 : GPIO
[16:35:26] 12 : USB_DM
[16:35:26] 13 : USB_DP
[16:35:26] 16 : UART_TX[0]
[16:35:26] 17 : UART_RX[0]
[16:35:26]============ After Setup End =============
[16:35:27][ 2268][I][ZigbeeCore.cpp:386] esp_zb_app_signal_handler(): Network(0xc5a7) is open for 180 seconds
[16:35:27][ 2437][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[16:35:27][ 2445][I][ZigbeeCore.cpp:354] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x02a4)
[16:35:27][ 2446][V][ZigbeeCore.cpp:358] esp_zb_app_signal_handler(): Device capabilities: 0x80
[16:35:27][ 2446][D][ZigbeeGateway.cpp:471] zbDeviceAnnce(): zbDeviceAnnce short address (0x2a4), ieee_addr (0xa4):(0xc1):(0x38):(0x69):(0xd4):(0x27):(0x9):(0xb6)
[16:35:27][ 2447][D][ZigbeeGateway.cpp:474] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x2a4), ieee_addr (0xa4):(0xc1):(0x38):(0x69):(0xd4):(0x27):(0x9):(0xb6)
[16:35:27][ 2448][I][ZigbeeGateway.cpp:498] zbDeviceAnnce(): Tuya magic last hope
[16:35:27][ 2733][I][ZigbeeGateway.cpp:541] printJoinedDevices(): joined devices:
[16:35:27][ 2733][I][ZigbeeGateway.cpp:544] printJoinedDevices(): Device on endpoint 1, short address: 0x2a4
[16:35:27][ 2962][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[16:35:27][ 2963][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x2a4) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:27][ 2963][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[16:35:27][ 2964][I][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_jl7qyupf"
[16:35:27][ 2965][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[16:35:27][ 2965][I][ZigbeeGateway.cpp:355] zbReadBasicCluster(): ZCL version id is "3"
[16:35:27][ 2966][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(68)
[16:35:27][ 2966][I][ZigbeeGateway.cpp:361] zbReadBasicCluster(): ZCL application version id is "68"
[16:35:27][ 2967][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[16:35:27][ 2967][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "TS0012"
[16:35:27][ 2968][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(3)
[16:35:27][ 2968][I][ZigbeeGateway.cpp:367] zbReadBasicCluster(): ZCL power source id is "3"
[16:35:27][ 2969][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0xfffe), type(0x30), value(0)
[16:35:27][ 2970][I][ZigbeeGateway.cpp:371] zbReadBasicCluster(): Attribute 0xFFFE, data type 0x30
[16:35:27][ 3134][I][ZigbeeGateway.cpp:309] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[16:35:28][ 3174][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:28][ 3175][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0x0
[16:35:28][ 3175][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:28][ 3176][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1[0x2]
[16:35:28][ 3634][I][ZigbeeGateway.cpp:315] zbQueryDeviceBasicCluster(): basic tsn 0x2
[16:35:28][ 3634][I][ZigbeeGateway.cpp:309] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[16:35:28][ 3920][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[16:35:28][ 3921][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x2a4) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:28][ 3921][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[16:35:28][ 3922][I][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_jl7qyupf"
[16:35:28][ 4032][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[16:35:28][ 4033][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x2a4) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:28][ 4033][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[16:35:28][ 4034][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "TS0012"
[16:35:28][ 4135][I][ZigbeeGateway.cpp:315] zbQueryDeviceBasicCluster(): basic tsn 0x3
[16:35:29][ 4135][I][ZigbeeGateway.cpp:993] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[16:35:29][ 4595][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1001) callback
[16:35:29][ 4595][V][ZigbeeHandlers.cpp:187] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x2a4) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:29][ 4596][V][ZigbeeHandlers.cpp:194] zb_cmd_write_attr_resp_handler(): Write attribute response: status(0), cluster(0x0), attribute(0xffff)
[16:35:29][ 4636][I][ZigbeeGateway.cpp:271] zbPrintDeviceDiscovery(): short_addr_req 676
[16:35:29][ 4706][I][ZigbeeGateway.cpp:205] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 676, endpoints count 2
[16:35:29][ 4706][I][ZigbeeGateway.cpp:208] Z2S_active_ep_req_cb(): Endpont # 1, id 1
[16:35:29][ 4707][I][ZigbeeGateway.cpp:208] Z2S_active_ep_req_cb(): Endpont # 2, id 2
[16:35:29][ 4921][I][ZigbeeGateway.cpp:224] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 676, endpoint # 1
[16:35:29][ 4921][I][ZigbeeGateway.cpp:225] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 7, out clusters # 2
[16:35:29][ 4922][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 1, id 3
[16:35:29][ 4922][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 2, id 4
[16:35:29][ 4923][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 3, id 5
[16:35:29][ 4923][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 4, id 6
[16:35:29][ 4924][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 5, id 57344
[16:35:29][ 4924][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 6, id 57345
[16:35:29][ 4925][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 7, id 0
[16:35:29][ 4925][I][ZigbeeGateway.cpp:244] Z2S_simple_desc_req_cb(): Out cluster # 1, id 25
[16:35:29][ 4925][I][ZigbeeGateway.cpp:244] Z2S_simple_desc_req_cb(): Out cluster # 2, id 10
[16:35:29][ 5033][I][ZigbeeGateway.cpp:224] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 676, endpoint # 2
[16:35:29][ 5034][I][ZigbeeGateway.cpp:225] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 3, out clusters # 0
[16:35:29][ 5034][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 1, id 4
[16:35:29][ 5035][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 2, id 5
[16:35:29][ 5035][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 3, id 6
[16:35:30][ 5254][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:30][ 5254][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0x3) for command (0xc) with status 0x84
[16:35:30][ 5255][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:30][ 5255][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x5[0x0]
[16:35:30][ 5369][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:30][ 5370][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0x4) for command (0xc) with status 0x84
[16:35:30][ 5371][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:30][ 5371][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x6[0x0]
[16:35:30][ 5486][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:30][ 5487][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0x5) for command (0xc) with status 0x84
[16:35:30][ 5487][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:30][ 5488][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x7[0x0]
[16:35:30][ 5603][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:30][ 5603][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0x6) for command (0xc) with status 0x84
[16:35:30][ 5604][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:30][ 5605][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x8[0x0]
[16:35:30][ 5720][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:30][ 5720][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0xe000) for command (0xc) with status 0x84
[16:35:30][ 5721][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:30][ 5722][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x9[0x0]
[16:35:30][ 5837][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:30][ 5837][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0xe001) for command (0xc) with status 0x84
[16:35:30][ 5838][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:30][ 5838][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0xa[0x0]
[16:35:30][ 5952][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:30][ 5953][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0x0) for command (0xc) with status 0x84
[16:35:30][ 5954][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:30][ 5954][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0xb[0x0]
[16:35:30][ 6078][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0x19, command id: 11
[16:35:30][ 6079][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[16:35:30][ 6079][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[16:35:30][ 6080][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[16:35:30][ 6080][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 18 size: 2
[16:35:30][ 6081][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x0C
[16:35:30][ 6081][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x84
[16:35:30][ 6081][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2a4, 0x2a4, 0x0, 0x0
[16:35:30][ 6082][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[16:35:31][ 6185][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:31][ 6185][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(1) to dst_endpoint(1), cluster(0xa) for command (0xc) with status 0x84
[16:35:31][ 6186][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:31][ 6187][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0xd[0x0]
[16:35:31][ 6665][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:31][ 6665][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(2) to dst_endpoint(1), cluster(0x4) for command (0xc) with status 0x84
[16:35:31][ 6666][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:31][ 6667][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0xe[0x0]
[16:35:31][ 6782][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:31][ 6782][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(2) to dst_endpoint(1), cluster(0x5) for command (0xc) with status 0x84
[16:35:31][ 6783][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:31][ 6784][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0xf[0x0]
[16:35:31][ 6897][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:31][ 6898][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2a4), src_endpoint(2) to dst_endpoint(1), cluster(0x6) for command (0xc) with status 0x84
[16:35:31][ 6899][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:31][ 6899][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x10[0x0]
[16:35:34][ 9262][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:34][ 9262][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2a4) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:35:34][ 9263][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:35:34][ 9263][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:35:34][ 9387][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:34][ 9388][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2a4) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:35:34][ 9388][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:35:34][ 9389][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:35:34][ 9689][I][ZigbeeCore.cpp:403] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0x02a4), rejoin (NO)
[16:35:38][ 13710][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[16:35:38][ 13713][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[16:35:39][ 14233][I][ZigbeeCore.cpp:354] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x2c0a)
[16:35:39][ 14234][V][ZigbeeCore.cpp:358] esp_zb_app_signal_handler(): Device capabilities: 0x80
[16:35:39][ 14234][D][ZigbeeGateway.cpp:471] zbDeviceAnnce(): zbDeviceAnnce short address (0x2c0a), ieee_addr (0xa4):(0xc1):(0x38):(0x69):(0xd4):(0x27):(0x9):(0xb6)
[16:35:39][ 14235][D][ZigbeeGateway.cpp:474] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x2c0a), ieee_addr (0xa4):(0xc1):(0x38):(0x69):(0xd4):(0x27):(0x9):(0xb6)
[16:35:39][ 14235][I][ZigbeeGateway.cpp:498] zbDeviceAnnce(): Tuya magic last hope
[16:35:39][ 14462][I][ZigbeeGateway.cpp:541] printJoinedDevices(): joined devices:
[16:35:39][ 14462][I][ZigbeeGateway.cpp:544] printJoinedDevices(): Device on endpoint 1, short address: 0x2c0a
[16:35:39][ 14552][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[16:35:39][ 14552][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:39][ 14553][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[16:35:39][ 14554][I][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_jl7qyupf"
[16:35:39][ 14554][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[16:35:39][ 14555][I][ZigbeeGateway.cpp:355] zbReadBasicCluster(): ZCL version id is "3"
[16:35:39][ 14555][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(68)
[16:35:39][ 14556][I][ZigbeeGateway.cpp:361] zbReadBasicCluster(): ZCL application version id is "68"
[16:35:39][ 14556][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[16:35:39][ 14557][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "TS0012"
[16:35:39][ 14557][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(3)
[16:35:39][ 14558][I][ZigbeeGateway.cpp:367] zbReadBasicCluster(): ZCL power source id is "3"
[16:35:39][ 14558][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0xfffe), type(0x30), value(0)
[16:35:39][ 14559][I][ZigbeeGateway.cpp:371] zbReadBasicCluster(): Attribute 0xFFFE, data type 0x30
[16:35:39][ 14731][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:39][ 14732][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0x0
[16:35:39][ 14732][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:39][ 14733][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x12[0x2]
[16:35:39][ 14863][I][ZigbeeGateway.cpp:309] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[16:35:39][ 14945][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[16:35:39][ 14946][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:39][ 14946][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[16:35:39][ 14947][I][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_jl7qyupf"
[16:35:40][ 15363][I][ZigbeeGateway.cpp:315] zbQueryDeviceBasicCluster(): basic tsn 0x13
[16:35:40][ 15363][I][ZigbeeGateway.cpp:309] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[16:35:40][ 15552][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[16:35:40][ 15553][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:40][ 15553][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[16:35:40][ 15554][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "TS0012"
[16:35:40][ 15864][I][ZigbeeGateway.cpp:315] zbQueryDeviceBasicCluster(): basic tsn 0x14
[16:35:40][ 15864][I][ZigbeeGateway.cpp:993] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[16:35:40][ 16124][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[16:35:41][ 16241][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1001) callback
[16:35:41][ 16241][V][ZigbeeHandlers.cpp:187] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:41][ 16242][V][ZigbeeHandlers.cpp:194] zb_cmd_write_attr_resp_handler(): Write attribute response: status(0), cluster(0x0), attribute(0xffff)
[16:35:41][ 16357][I][ZigbeeCore.cpp:386] esp_zb_app_signal_handler(): Network(0xc5a7) is open for 180 seconds
[16:35:41][ 16365][I][ZigbeeGateway.cpp:271] zbPrintDeviceDiscovery(): short_addr_req 11274
[16:35:41][ 16469][I][ZigbeeGateway.cpp:205] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 11274, endpoints count 2
[16:35:41][ 16470][I][ZigbeeGateway.cpp:208] Z2S_active_ep_req_cb(): Endpont # 1, id 1
[16:35:41][ 16471][I][ZigbeeGateway.cpp:208] Z2S_active_ep_req_cb(): Endpont # 2, id 2
[16:35:41][ 16934][I][ZigbeeGateway.cpp:224] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 11274, endpoint # 1
[16:35:41][ 16935][I][ZigbeeGateway.cpp:225] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 7, out clusters # 2
[16:35:41][ 16935][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 1, id 3
[16:35:41][ 16936][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 2, id 4
[16:35:41][ 16936][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 3, id 5
[16:35:41][ 16937][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 4, id 6
[16:35:41][ 16937][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 5, id 57344
[16:35:41][ 16938][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 6, id 57345
[16:35:41][ 16938][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 7, id 0
[16:35:41][ 16938][I][ZigbeeGateway.cpp:244] Z2S_simple_desc_req_cb(): Out cluster # 1, id 25
[16:35:41][ 16939][I][ZigbeeGateway.cpp:244] Z2S_simple_desc_req_cb(): Out cluster # 2, id 10
[16:35:41][ 17046][I][ZigbeeGateway.cpp:224] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 11274, endpoint # 2
[16:35:41][ 17047][I][ZigbeeGateway.cpp:225] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 3, out clusters # 0
[16:35:41][ 17047][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 1, id 4
[16:35:41][ 17048][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 2, id 5
[16:35:41][ 17048][I][ZigbeeGateway.cpp:229] Z2S_simple_desc_req_cb(): In cluster # 3, id 6
[16:35:42][ 17260][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:42][ 17260][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0x3) for command (0xc) with status 0x84
[16:35:42][ 17261][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:42][ 17262][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x16[0x0]
[16:35:42][ 17374][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:42][ 17374][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0x4) for command (0xc) with status 0x84
[16:35:42][ 17375][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:42][ 17376][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x17[0x0]
[16:35:42][ 17486][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:42][ 17487][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0x5) for command (0xc) with status 0x84
[16:35:42][ 17488][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:42][ 17488][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x18[0x0]
[16:35:42][ 17599][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:42][ 17599][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0x6) for command (0xc) with status 0x84
[16:35:42][ 17600][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:42][ 17600][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x19[0x0]
[16:35:42][ 17711][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:42][ 17711][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0xe000) for command (0xc) with status 0x84
[16:35:42][ 17712][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:42][ 17713][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1a[0x0]
[16:35:42][ 17823][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:42][ 17824][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0xe001) for command (0xc) with status 0x84
[16:35:42][ 17824][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:42][ 17825][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1b[0x0]
[16:35:42][ 17935][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:42][ 17936][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0x0) for command (0xc) with status 0x84
[16:35:42][ 17937][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:42][ 17937][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1c[0x0]
[16:35:42][ 18048][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0x19, command id: 11
[16:35:42][ 18048][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[16:35:42][ 18049][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[16:35:42][ 18049][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[16:35:42][ 18050][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 11 size: 2
[16:35:42][ 18050][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x0C
[16:35:42][ 18050][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x84
[16:35:42][ 18051][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2c0a, 0x2c0a, 0x0, 0x0
[16:35:42][ 18051][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[16:35:43][ 18160][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:43][ 18160][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(1) to dst_endpoint(1), cluster(0xa) for command (0xc) with status 0x84
[16:35:43][ 18161][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:43][ 18162][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1e[0x0]
[16:35:43][ 18358][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:43][ 18358][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:35:43][ 18359][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:35:43][ 18359][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:35:43][ 18471][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:43][ 18472][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(2) to dst_endpoint(1), cluster(0x4) for command (0xc) with status 0x84
[16:35:43][ 18472][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:43][ 18473][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1f[0x0]
[16:35:43][ 18584][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:43][ 18585][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(2) to dst_endpoint(1), cluster(0x5) for command (0xc) with status 0x84
[16:35:43][ 18585][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:43][ 18586][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x20[0x0]
[16:35:43][ 18696][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[16:35:43][ 18697][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x2c0a), src_endpoint(2) to dst_endpoint(1), cluster(0x6) for command (0xc) with status 0x84
[16:35:43][ 18698][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[16:35:43][ 18698][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x21[0x0]
[16:35:43][ 18820][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:43][ 18820][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:35:43][ 18821][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:35:43][ 18821][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:35:45][ 20830][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:45][ 20830][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0xe000)
[16:35:45][ 20831][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0xe000), attribute id (0xd003), attribute data type (0x42)
[16:35:46][ 21506][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21506][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:35:46][ 21507][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:35:46][ 21507][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:35:46][ 21508][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21509][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:35:46][ 21509][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4001), attribute data type (0x21)
[16:35:46][ 21510][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x4001), attribute data type (0x21)
[16:35:46][ 21511][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21511][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:35:46][ 21512][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4002), attribute data type (0x21)
[16:35:46][ 21513][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x4002), attribute data type (0x21)
[16:35:46][ 21513][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21514][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:35:46][ 21515][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x8002), attribute data type (0x30)
[16:35:46][ 21515][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x8002), attribute data type (0x30)
[16:35:46][ 21629][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21630][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[16:35:46][ 21631][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0xe001), attribute id (0xd030), attribute data type (0x30)
[16:35:46][ 21753][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21754][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:35:46][ 21754][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:35:46][ 21755][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:35:46][ 21756][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21756][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:35:46][ 21757][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4001), attribute data type (0x21)
[16:35:46][ 21757][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x4001), attribute data type (0x21)
[16:35:46][ 21758][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21758][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:35:46][ 21759][I][ZigbeeGateway.cpp:601] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4002), attribute data type (0x21)
[16:35:46][ 21760][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x4002), attribute data type (0x21)
[16:35:46][ 21876][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21877][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:46][ 21878][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x0), attribute id (0x1), attribute data type (0x20)
[16:35:46][ 21878][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21879][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:46][ 21879][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x0), attribute id (0xffe2), attribute data type (0x20)
[16:35:46][ 21880][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:46][ 21881][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:46][ 21881][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x0), attribute id (0xffe4), attribute data type (0x20)
[16:35:47][ 22553][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:47][ 22554][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x0)
[16:35:47][ 22554][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x0), attribute id (0xffdf), attribute data type (0x42)
[16:35:47][ 22688][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[16:35:47][ 22689][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[16:35:47][ 22689][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[16:35:47][ 22690][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[16:35:47][ 22690][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 9 size: 2
[16:35:47][ 22690][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[16:35:47][ 22691][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[16:35:47][ 22691][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2c0a, 0x2c0a, 0x0, 0x0
[16:35:47][ 22692][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[16:35:54][ 29984][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:54][ 29985][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:35:54][ 29985][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report ON
[16:35:54][ 29986][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:35:59][ 34745][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:35:59][ 34746][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:35:59][ 34747][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:35:59][ 34747][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:02][ 38045][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:02][ 38046][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:36:02][ 38046][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report ON
[16:36:02][ 38047][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:05][ 40839][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:05][ 40840][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:36:05][ 40840][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:36:05][ 40841][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:07][ 43077][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:07][ 43077][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:36:07][ 43078][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report ON
[16:36:07][ 43078][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:11][ 46323][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:11][ 46324][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:36:11][ 46324][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:36:11][ 46325][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:15][ 50541][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:15][ 50542][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:36:15][ 50543][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report ON
[16:36:15][ 50543][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:15][ 50666][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:15][ 50666][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:36:15][ 50667][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report ON
[16:36:15][ 50668][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:19][ 54271][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:19][ 54271][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(1) to dst endpoint(1) cluster(0x6)
[16:36:19][ 54272][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:36:19][ 54273][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:19][ 54395][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[16:36:19][ 54395][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0x2c0a) src endpoint(2) to dst endpoint(1) cluster(0x6)
[16:36:19][ 54396][I][ZigbeeGateway.cpp:598] zbAttributeReporting(): zbAttributeReporting on/off report OFF
[16:36:19][ 54397][I][ZigbeeGateway.cpp:678] zbAttributeReporting(): zbAttributeReporting from (0x9b6), endpoint (2), cluster (0x6), attribute id (0x0), attribute data type (0x10)
[16:36:26]
Serial port closed!
-
LukiSpajder
- Posts: 1548
- Joined: Tue Aug 18, 2020 2:22 pm
- Has thanked: 25 times
- Been thanked: 34 times
A tu na testy moduł do rolet , nie wiem czy na razie nie musi iść do poczekalni 
,
https://pl.aliexpress.com/item/10050068 ... pt=glo2pol
Peer Manufacturer is "_TZ3210_ol1uhvza"
Peer Model is "TS130F"
Logi ze skanera:
, https://pl.aliexpress.com/item/10050068 ... pt=glo2pol
Peer Manufacturer is "_TZ3210_ol1uhvza"
Peer Model is "TS130F"
Logi ze skanera:
You do not have the required permissions to view the files attached to this post.
-
Mario78
- Posts: 409
- Joined: Fri Jan 05, 2024 6:18 am
- Location: Śląsk
- Been thanked: 1 time
Koledzy.
Mam sonoff SNZB 01P. Jest to przycisk na baterie
https://sklep.msalamon.pl/produkt/intel ... bOVO49nwEM
Sparował mi się zgodnie z instrukcją z bramka z najnowszym wgranym softem ale mimo ze dioda na przycisku odpowiada zgodnie z instrukcja jednym mignieciem to nie widzę tego przycisku w cloud.
Parowanie przebiega szybko i kończy się 3sekundowym świeceniem diody. Wszystko jak w instrukcji. Nie wiecie co może być powodem?
Mam sonoff SNZB 01P. Jest to przycisk na baterie
https://sklep.msalamon.pl/produkt/intel ... bOVO49nwEM
Sparował mi się zgodnie z instrukcją z bramka z najnowszym wgranym softem ale mimo ze dioda na przycisku odpowiada zgodnie z instrukcja jednym mignieciem to nie widzę tego przycisku w cloud.
Parowanie przebiega szybko i kończy się 3sekundowym świeceniem diody. Wszystko jak w instrukcji. Nie wiecie co może być powodem?
Code: Select all
[21:53:09][ 26260][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[21:53:10][ 26265][V][ZigbeeCore.cpp:412] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[21:53:10][ 26488][I][ZigbeeCore.cpp:354] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x77ca)
[21:53:10][ 26489][V][ZigbeeCore.cpp:358] esp_zb_app_signal_handler(): Device capabilities: 0x80
[21:53:10][ 26489][D][ZigbeeGateway.cpp:471] zbDeviceAnnce(): zbDeviceAnnce short address (0x77ca), ieee_addr (0xc):(0xef):(0xf6):(0xff):(0xfe):(0x77):(0xaf):(0x75)
[21:53:10][ 26490][D][ZigbeeGateway.cpp:474] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x77ca), ieee_addr (0xc):(0xef):(0xf6):(0xff):(0xfe):(0x77):(0xaf):(0x75)
[21:53:10][ 26491][I][ZigbeeGateway.cpp:498] zbDeviceAnnce(): Tuya magic last hope
[21:53:10][ 26698][I][ZigbeeGateway.cpp:541] printJoinedDevices(): joined devices:
[21:53:10][ 26699][I][ZigbeeGateway.cpp:544] printJoinedDevices(): Device on endpoint 1, short address: 0x77ca
[21:53:10][ 26937][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[21:53:10][ 26937][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x77ca) src endpoint(1) to dst endpoint(1) cluster(0x0)
[21:53:10][ 26938][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(7)
[21:53:10][ 26939][I][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "eWeLink"
[21:53:10][ 26939][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(8)
[21:53:10][ 26940][I][ZigbeeGateway.cpp:355] zbReadBasicCluster(): ZCL version id is "8"
[21:53:10][ 26940][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(0)
[21:53:10][ 26941][I][ZigbeeGateway.cpp:361] zbReadBasicCluster(): ZCL application version id is "0"
[21:53:10][ 26942][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(8)
[21:53:10][ 26942][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "SNZB-01P"
[21:53:10][ 26943][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(0)
[21:53:10][ 26945][I][ZigbeeGateway.cpp:367] zbReadBasicCluster(): ZCL power source id is "0"
[21:53:10][ 26945][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(134), cluster(0x0), attribute(0xfffe), type(0x0), value(0)
[21:53:10][ 26967][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[21:53:10][ 26968][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0x77ca), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0xc3
[21:53:10][ 26968][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[21:53:10][ 26969][I][ZigbeeGateway.cpp:1298] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1[0x2]
[21:53:10][ 27099][I][ZigbeeGateway.cpp:993] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[21:53:10][ 27291][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1001) callback
[21:53:10][ 27291][V][ZigbeeHandlers.cpp:187] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x77ca) src endpoint(1) to dst endpoint(1) cluster(0x0)
[21:53:10][ 27292][V][ZigbeeHandlers.cpp:194] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0x0), attribute(0xffde)
[21:53:11][ 27601][I][ZigbeeGateway.cpp:993] sendAttributeWrite(): Sending 'write attribute' command - id (0x9), type (0x20), size (0x1), value (0x1)
[21:53:11][ 27747][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1001) callback
[21:53:11][ 27748][V][ZigbeeHandlers.cpp:187] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x77ca) src endpoint(1) to dst endpoint(1) cluster(0xfcc0)
[21:53:11][ 27749][V][ZigbeeHandlers.cpp:194] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0xfcc0), attribute(0x9)
[21:53:11][ 28103][D][Z2S_Gateway.ino:677] loop(): Unknown model eWeLink::SNZB-01P, no binding is possible-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Mario78 wrote: Sat Mar 15, 2025 7:19 pm Koledzy.
Mam sonoff SNZB 01P. Jest to przycisk na baterie
https://sklep.msalamon.pl/produkt/intel ... bOVO49nwEM
Sparował mi się zgodnie z instrukcją z bramka z najnowszym wgranym softem ale mimo ze dioda na przycisku odpowiada zgodnie z instrukcja jednym mignieciem to nie widzę tego przycisku w cloud.
Parowanie przebiega szybko i kończy się 3sekundowym świeceniem diody. Wszystko jak w instrukcji. Nie wiecie co może być powodem?
Code: Select all
[21:53:11][ 28103][D][Z2S_Gateway.ino:677] loop(): Unknown model eWeLink::SNZB-01P, no binding is possibleBramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
Mario78
- Posts: 409
- Joined: Fri Jan 05, 2024 6:18 am
- Location: Śląsk
- Been thanked: 1 time
Bardzo Ci dziękuję i czekam z niecierpliwością bo rozumiem że będzie w +BWNU?vajera wrote: Sat Mar 15, 2025 10:13 pmMario78 wrote: Sat Mar 15, 2025 7:19 pm Koledzy.
Mam sonoff SNZB 01P. Jest to przycisk na baterie
https://sklep.msalamon.pl/produkt/intel ... bOVO49nwEM
Sparował mi się zgodnie z instrukcją z bramka z najnowszym wgranym softem ale mimo ze dioda na przycisku odpowiada zgodnie z instrukcja jednym mignieciem to nie widzę tego przycisku w cloud.
Parowanie przebiega szybko i kończy się 3sekundowym świeceniem diody. Wszystko jak w instrukcji. Nie wiecie co może być powodem?Nie sparował się bo nie ma go w bazie - muszę dodać.Code: Select all
[21:53:11][ 28103][D][Z2S_Gateway.ino:677] loop(): Unknown model eWeLink::SNZB-01P, no binding is possible
Robisz super robote
Last edited by Mario78 on Sat Mar 15, 2025 11:14 pm, edited 2 times in total.
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Tu jest zupełnie nowy klaster - WindowsCovering(0x102) - muszę napisać jego obsługę i wymyślić jak to pożenić z Supla - na szczęście @Klew dodał ostatnio funkcje, które mogą to ułatwić.LukiSpajder wrote: Sat Mar 15, 2025 3:51 pm A tu na testy moduł do rolet , nie wiem czy na razie nie musi iść do poczekalni
https://pl.aliexpress.com/item/10050068 ... pt=glo2pol
Peer Manufacturer is "_TZ3210_ol1uhvza"
Peer Model is "TS130F"
Logi ze skanera:
Logi sterownik rolety .rar
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
, jak byś potrzebował go, to mogę wysłać do Ciebie .