Zgłoszenia błędów [bramka ZigBee]

bokk · Post Mon Dec 29, 2025 9:26 pm

vajera wrote: Mon Dec 29, 2025 8:48 pm
bokk wrote: Mon Dec 29, 2025 10:59 am Na bramce z wersja 1.1.9 głowicy Sonoff nie da się wyłączyć za 1 razem. Z programu wciskam wyłącz pokazuje off po czym wskakuje 5° i dopiero kolejne wciśnięcie wyłącz wyłącza głowicę.
Wypróbuj 1.1.11-29/12/25

Wgrałem v1.1.11 ale w bramce po aktualizacji pokazuje się jako v1.1.10. Glowicacw trybie program ustawiona na 23° i grzeje. Naciskam wyłacz i wyłącza się na chwilkę ale po chwili pokazuje reczne 5° i podnosi na 23°

vajera · Post Tue Dec 30, 2025 12:17 am

bokk wrote: Mon Dec 29, 2025 9:26 pm
vajera wrote: Mon Dec 29, 2025 8:48 pm
bokk wrote: Mon Dec 29, 2025 10:59 am Na bramce z wersja 1.1.9 głowicy Sonoff nie da się wyłączyć za 1 razem. Z programu wciskam wyłącz pokazuje off po czym wskakuje 5° i dopiero kolejne wciśnięcie wyłącz wyłącza głowicę.
Wypróbuj 1.1.11-29/12/25
Wgrałem v1.1.11 ale w bramce po aktualizacji pokazuje się jako v1.1.10. Glowicacw trybie program ustawiona na 23° i grzeje. Naciskam wyłacz i wyłącza się na chwilkę ale po chwili pokazuje reczne 5° i podnosi na 23°

Mój błąd - nie zsynchronizowałem plików na GitHub - poprawka w 1.1.12-30/12/25

bokk · Post Tue Dec 30, 2025 1:50 am

vajera wrote: Tue Dec 30, 2025 12:17 am
bokk wrote: Mon Dec 29, 2025 9:26 pm
vajera wrote: Mon Dec 29, 2025 8:48 pm

Wypróbuj 1.1.11-29/12/25
Wgrałem v1.1.11 ale w bramce po aktualizacji pokazuje się jako v1.1.10. Glowicacw trybie program ustawiona na 23° i grzeje. Naciskam wyłacz i wyłącza się na chwilkę ale po chwili pokazuje reczne 5° i podnosi na 23°
Mój błąd - nie zsynchronizowałem plików na GitHub - poprawka w 1.1.12-30/12/25

Wersja 1.1.12 eliminuje te błędy, teraz działa prawidłowo

vajera · Post Tue Dec 30, 2025 4:01 am

bokk wrote: Tue Dec 30, 2025 1:50 am
vajera wrote: Tue Dec 30, 2025 12:17 am
bokk wrote: Mon Dec 29, 2025 9:26 pm

Wgrałem v1.1.11 ale w bramce po aktualizacji pokazuje się jako v1.1.10. Glowicacw trybie program ustawiona na 23° i grzeje. Naciskam wyłacz i wyłącza się na chwilkę ale po chwili pokazuje reczne 5° i podnosi na 23°
Mój błąd - nie zsynchronizowałem plików na GitHub - poprawka w 1.1.12-30/12/25
Wersja 1.1.12 eliminuje te błędy, teraz działa prawidłowo

Kiedy Ty śpisz?

Nic nie zepsułem przy okazji?

bokk · Post Tue Dec 30, 2025 5:55 am

Z obserwacji na pozostałych urzadzeniach inne działają prawidłowo- bez zmian. A przy tych ostatnuch aktualizacjach nie dodawałeś żadnych nowych urządzeń tych zgłoszonych

george1255 · Post Wed Dec 31, 2025 4:36 pm

Code: Select all

/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/examples/Z2S_Gateway/z2s_device_hvac.cpp: In function 'void msgZ2SDeviceHvac(int16_t, uint8_t, int32_t)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/examples/Z2S_Gateway/z2s_device_hvac.cpp:348:31: error: 'class Supla::Control::HvacBaseEE' has no member named 'isHvacFlagForcedOffBySensor'
  348 |   /**/if (Supla_Z2S_HvacBase->isHvacFlagForcedOffBySensor()) {
      |                               ^~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      Compilation error: 'class Supla::Control::HvacBaseEE' has no member named 'isHvacFlagForcedOffBySensor'

wersja Release v1.1.16

vajera · Post Wed Dec 31, 2025 4:54 pm

george1255 wrote: Wed Dec 31, 2025 4:36 pm

Code: Select all

/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/examples/Z2S_Gateway/z2s_device_hvac.cpp: In function 'void msgZ2SDeviceHvac(int16_t, uint8_t, int32_t)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/examples/Z2S_Gateway/z2s_device_hvac.cpp:348:31: error: 'class Supla::Control::HvacBaseEE' has no member named 'isHvacFlagForcedOffBySensor'
  348 |   /**/if (Supla_Z2S_HvacBase->isHvacFlagForcedOffBySensor()) {
      |                               ^~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      Compilation error: 'class Supla::Control::HvacBaseEE' has no member named 'isHvacFlagForcedOffBySensor'

wersja Release v1.1.16

Masz nieaktualną bibliotekę SuplaDevice.

george1255 · Post Wed Dec 31, 2025 5:48 pm

vajera wrote: Wed Dec 31, 2025 4:54 pm

Masz nieaktualną bibliotekę SuplaDevice.

pobralem z main i teraz mam calkiem na czerwono

Code: Select all

/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerBase::setValueOnServer(uint32_t)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:76:22: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
   76 |   channel.setNewValue(0, 0, 0, 0, _brightness);
      |   ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:18:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerBase::setStateOnServer(bool)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:80:22: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
   80 |   channel.setNewValue(0, 0, 0, 0, (state ? _last_brightness : 0));
      |   ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerBase::iterateAlways()':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:92:24: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
   92 |     channel.setNewValue(0, 0, 0, 0, _current_brightness);
      |     ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:104:29: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  104 |          channel.setNewValue(0, 0, 0, 0, (isOn() ? _last_brightness : 0));
      |          ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:109:30: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  109 |           channel.setNewValue(0, 0, 0, 0, 0);
      |           ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerInterface::iterateAlways()':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp:216:24: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
  216 |     channel.setNewValue(0, 0, 0, 0, _brightness);
      |     ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp:18:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp:218:38: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  218 |       _rgb->getChannel()->setNewValue(0, 0, 0, 0, 0);
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp: In member function 'virtual void Supla::Control::Z2S_RGBInterface::iterateAlways()':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp:283:24: error: no matching function for call to 'Supla::Channel::setNewValue(uint8_t&, uint8_t&, uint8_t&, uint8_t&, int)'
  283 |     channel.setNewValue(_red, _green, _blue, _colorBrightness, 0);
      |     ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp:19:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp:285:41: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  285 |       _dimmer->getChannel()->setNewValue(0, 0, 0, 0, 0);
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.cpp: In member function 'virtual void Supla::Control::Z2S_TuyaDimmerSwitch::setValueOnServer(uint32_t)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.cpp:152:22: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
  152 |   channel.setNewValue(0, 0, 0, 0, _brightness);
      |   ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.h:22,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.cpp:20:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided

exit status 1

Compilation error: exit status 1

vajera · Post Wed Dec 31, 2025 5:54 pm

george1255 wrote: Wed Dec 31, 2025 5:48 pm

vajera wrote: Wed Dec 31, 2025 4:54 pm

Masz nieaktualną bibliotekę SuplaDevice.

pobralem z main i teraz mam calkiem na czerwono

Code: Select all

/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerBase::setValueOnServer(uint32_t)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:76:22: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
   76 |   channel.setNewValue(0, 0, 0, 0, _brightness);
      |   ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:18:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerBase::setStateOnServer(bool)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:80:22: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
   80 |   channel.setNewValue(0, 0, 0, 0, (state ? _last_brightness : 0));
      |   ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerBase::iterateAlways()':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:92:24: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
   92 |     channel.setNewValue(0, 0, 0, 0, _current_brightness);
      |     ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:104:29: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  104 |          channel.setNewValue(0, 0, 0, 0, (isOn() ? _last_brightness : 0));
      |          ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.cpp:109:30: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  109 |           channel.setNewValue(0, 0, 0, 0, 0);
      |           ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp: In member function 'virtual void Supla::Control::Z2S_DimmerInterface::iterateAlways()':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp:216:24: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
  216 |     channel.setNewValue(0, 0, 0, 0, _brightness);
      |     ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp:18:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_interface.cpp:218:38: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  218 |       _rgb->getChannel()->setNewValue(0, 0, 0, 0, 0);
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp: In member function 'virtual void Supla::Control::Z2S_RGBInterface::iterateAlways()':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp:283:24: error: no matching function for call to 'Supla::Channel::setNewValue(uint8_t&, uint8_t&, uint8_t&, uint8_t&, int)'
  283 |     channel.setNewValue(_red, _green, _blue, _colorBrightness, 0);
      |     ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp:19:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_rgb_interface.cpp:285:41: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, int)'
  285 |       _dimmer->getChannel()->setNewValue(0, 0, 0, 0, 0);
      |       ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.cpp: In member function 'virtual void Supla::Control::Z2S_TuyaDimmerSwitch::setValueOnServer(uint32_t)':
/Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.cpp:152:22: error: no matching function for call to 'Supla::Channel::setNewValue(int, int, int, int, uint8_t&)'
  152 |   channel.setNewValue(0, 0, 0, 0, _brightness);
      |   ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channel_element.h:20,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_dimmer_base.h:24,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.h:22,
                 from /Users/zbyszek/Documents/Arduino/libraries/Z2S_Library/src/Z2S_control/Z2S_Tuya_dimmer_switch.cpp:20:
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note: candidate: 'void Supla::Channel::setNewValue(double)'
   50 |   void setNewValue(double dbl);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:50:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note: candidate: 'void Supla::Channel::setNewValue(double, double)'
   51 |   void setNewValue(double temp, double humi);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:51:8: note:   candidate expects 2 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note: candidate: 'void Supla::Channel::setNewValue(int32_t)'
   52 |   void setNewValue(int32_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:52:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note: candidate: 'void Supla::Channel::setNewValue(bool)'
   53 |   void setNewValue(bool value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:53:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note: candidate: 'void Supla::Channel::setNewValue(const TElectricityMeter_ExtendedValue_V3&)'
   54 |   void setNewValue(const TElectricityMeter_ExtendedValue_V3 &emValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:54:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note: candidate: 'void Supla::Channel::setNewValue(uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t)'
   55 |   void setNewValue(uint8_t red,
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:55:8: note:   candidate expects 6 arguments, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note: candidate: 'void Supla::Channel::setNewValue(uint64_t)'
   61 |   void setNewValue(uint64_t value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:61:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_RollerShutterValue&)'
   62 |   void setNewValue(const TDSC_RollerShutterValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:62:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note: candidate: 'void Supla::Channel::setNewValue(const TDSC_FacadeBlindValue&)'
   63 |   void setNewValue(const TDSC_FacadeBlindValue &value);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:63:8: note:   candidate expects 1 argument, 5 provided
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note: candidate: 'bool Supla::Channel::setNewValue(const char*)'
   64 |   bool setNewValue(const char *newValue);
      |        ^~~~~~~~~~~
/Users/zbyszek/Documents/Arduino/libraries/SuplaDevice/src/supla/channels/channel.h:64:8: note:   candidate expects 1 argument, 5 provided

exit status 1

Compilation error: exit status 1

To teraz masz dla odmiany "za nową"

@klew chyba znowu coś tam pozmieniał - zapewne przy okazji wdrożenia klasy RGBWCT.
Pobierz wersję z mojego GitHuba.

kaju666 · Post Fri Jan 02, 2026 5:14 pm

Witam w nowym roku.

Dzisiaj taka niespodzianka. Kupiłem gnizadko zigbee z ikei, dodałem do bramki i jest problem

Bramka łapie loop, chwile działa, nie da sie odpalić www.
logi: https://pastebin.com/rAQ79TMe
Zaktualizowałem do najnowszej wersji ale nic nie pomogło.
Cóż czynić

?

płytka to Xiao

PS: nie wiem czy to ważne ale Xiao było wgrane z backupu z ESP 16MB
16 MB:
esptool.py --chip esp32c6 --port COMX read_flash 0x690000 0x160000 littlefs_zigbee.bin
Xiao:
esptool.py --chip esp32c6 --port COMX write_flash 0x290000 littlefs_zigbee.bin