No na to wygląda. Nawet wydaje mi sie ze jakos tak szybciej reaguje na zmiany nastaw niż wcześniej.vajera wrote: Tue Mar 31, 2026 4:38 pmW takim razie, być może, przez absolutny zbieg okoliczności, ta głowica ma taką wersję firmware
ZigBee OTA [bramka ZigBee]
Moderator: vajera
-
Mario78
- Posts: 409
- Joined: Fri Jan 05, 2024 6:18 am
- Location: Śląsk
- Been thanked: 1 time
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Nie sądzę, żeby ona się zaktualizowała do 1.4.4 przy pomocy pliku OTA od TRVZB - być może od początku miała taki numer.Mario78 wrote: Tue Mar 31, 2026 4:40 pmNo na to wygląda. Nawet wydaje mi sie ze jakos tak szybciej reaguje na zmiany nastaw niż wcześniej.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
LukiSpajder
- Posts: 1548
- Joined: Tue Aug 18, 2020 2:22 pm
- Has thanked: 25 times
- Been thanked: 34 times
@vajera ma pytanie czy w tych logach widać że zaczęło się przesyłane pliku do urządzenia . Wrzuciłem plik do pamięci i tak jakby wystartowała
aktualizacja
aktualizacja
Code: Select all
Using 'COM10' as serial port.
Showing logs:
[19:15:12][922802][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:12]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:12]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:12]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:12][922803][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:12][922804][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:12][922804][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:12][922805][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:12][922805][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 2 size: 16
[19:15:12][922806][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:12][922806][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:12][922807][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:12][922807][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:12][922807][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:12][922808][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922808][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922808][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922809][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922809][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922809][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922810][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922810][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922810][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922811][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922811][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922811][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:12][922812][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:12][922812][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:12][922813][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:12][922813][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:12][922814][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:12][922814][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:12] 19:C5:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:12][922815][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:12][922884][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:12][922884][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:12]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:12]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:12]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:12][922886][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:12][922886][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:12][922887][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:12][922887][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:12][922888][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 18 size: 16
[19:15:12][922888][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:12][922889][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:12][922889][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:12][922889][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:12][922890][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:12][922890][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922890][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922891][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922891][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922891][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922892][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922892][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922892][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922893][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922893][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922893][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:12][922894][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:12][922894][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:12][922895][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:12][922895][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:12][922896][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:12][922896][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:12][922897][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:12] 19:C6:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:12][922898][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:12][922953][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:12][922954][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:12]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:12]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:12]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:13][922956][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:13][922956][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:13][922956][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:13][922957][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:13][922957][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 17 size: 16
[19:15:13][922958][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][922958][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:13][922959][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:13][922959][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:13][922959][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][922960][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922960][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922960][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922961][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922961][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922961][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922962][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922962][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922962][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922963][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922963][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][922963][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:13][922964][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][922964][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][922965][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][922965][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:13][922966][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:13][922966][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:13] 19:C7:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:13][922967][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:13][923031][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:13][923032][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:13]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:13]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:13]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:13][923033][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:13][923034][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:13][923034][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:13][923035][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:13][923035][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 11 size: 16
[19:15:13][923036][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][923036][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:13][923037][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:13][923037][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:13][923037][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][923038][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923038][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923038][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923039][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923039][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923039][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923040][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923040][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923040][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923041][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923041][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923041][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:13][923042][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923042][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923043][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923043][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:13][923044][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:13][923044][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:13] 19:C8:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:13][923045][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:13][923831][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:13][923832][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:13]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:13]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:13]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:13][923834][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:13][923834][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:13][923835][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:13][923835][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:13][923836][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 43 size: 16
[19:15:13][923836][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][923836][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:13][923837][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:13][923837][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:13][923837][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][923838][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923838][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923838][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923839][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923839][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923839][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923840][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923840][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923840][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923841][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923841][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923841][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:13][923842][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923843][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923843][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923844][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:13][923844][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:13][923845][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:13] 19:C9:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:13][923845][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:13][923907][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:13][923908][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:13]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:13]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:13]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:13][923909][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:13][923910][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:13][923910][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:13][923911][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:13][923911][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 44 size: 16
[19:15:13][923912][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][923912][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:13][923912][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:13][923913][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:13][923913][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:13][923913][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923914][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923914][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923914][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923915][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923915][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923915][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923916][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923916][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923916][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923917][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:13][923917][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:13][923918][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923918][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923919][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:13][923919][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:13][923920][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:13][923920][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:13] 19:CA:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:13][923921][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:14][923978][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:14][923979][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:14]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:14]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:14]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:14][923980][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:14][923981][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:14][923981][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:14][923982][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:14][923982][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 40 size: 16
[19:15:14][923983][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][923983][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:14][923983][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:14][923984][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:14][923984][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][923984][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923985][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923985][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923985][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923986][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923986][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923986][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923987][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923987][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923987][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923988][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][923988][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:14][923989][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][923989][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][923990][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][923990][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:14][923991][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:14][923991][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:14] 19:CB:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:14][923992][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:14][924118][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:14][924119][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:14]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:14]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:14]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:14][924121][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:14][924121][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:14][924122][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:14][924122][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:14][924122][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 4 size: 16
[19:15:14][924123][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924123][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:14][924124][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:14][924124][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:14][924124][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924125][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924125][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924125][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924126][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924126][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924126][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924127][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924127][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924127][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924128][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924128][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924128][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:14][924129][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924129][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924130][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924130][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:14][924131][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:14][924131][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:14] 19:CC:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:14][924132][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:14][924608][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:14][924609][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:14]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:14]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:14]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:14][924610][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:14][924611][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:14][924611][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:14][924612][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:14][924612][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 39 size: 16
[19:15:14][924613][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924613][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:14][924613][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:14][924614][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:14][924614][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924614][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924615][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924615][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924616][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924616][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924616][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924617][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924617][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924617][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924618][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924618][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924618][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:14][924619][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924619][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924620][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924620][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:14][924621][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:14][924621][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:14] 19:CD:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:14][924622][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:14][924678][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:14][924679][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:14]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:14]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:14]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:14][924680][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:14][924681][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:14][924681][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:14][924682][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:14][924683][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 36 size: 16
[19:15:14][924683][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924683][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:14][924684][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:14][924684][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:14][924684][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924685][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924685][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924685][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924686][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924686][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924686][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924687][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924687][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924687][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924688][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924688][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924688][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:14][924689][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924689][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924690][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:14][924690][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:14][924691][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:14][924691][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:14] 19:CE:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:14][924692][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:14][924753][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:14][924754][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:14]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:14]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:14]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[19:15:14][924755][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:14][924756][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:14][924756][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:14][924757][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:14][924757][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 38 size: 16
[19:15:14][924758][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924758][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:14][924758][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:14][924759][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:14][924759][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924759][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924760][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924760][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924760][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924761][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924761][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924761][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924762][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924762][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924762][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924763][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924763][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:14][924764][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:14][924764][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:14][924765][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:14][924765][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:14][924766][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:14][924766][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:14] 19:CF:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:14][924767][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:14][924828][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:14][924829][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:14]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:14]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:14]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[19:15:14][924831][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:14][924831][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:14][924832][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:14][924832][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:14][924833][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 13 size: 16
[19:15:14][924833][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924834][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:14][924834][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:14][924834][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:14][924835][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:14][924835][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924835][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924836][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924836][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924836][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924837][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924837][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924837][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924838][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924838][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924838][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:14][924839][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:14][924839][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:15][924840][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:15][924840][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:15][924841][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:15][924841][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:15][924842][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:15] 19:D0:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:15][924843][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:15][924898][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:15][924899][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:15]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:15]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:15]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 158, rx_time: 0
[19:15:15][924901][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:15][924901][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:15][924902][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:15][924902][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:15][924903][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 7 size: 16
[19:15:15][924903][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:15][924903][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:15][924904][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:15][924904][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:15][924904][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:15][924905][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924905][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924906][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924906][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924906][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924907][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924907][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924907][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924908][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924908][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924908][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][924909][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:15][924909][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:15][924910][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:15][924910][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -49
[19:15:15][924911][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:15][924911][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:15][924912][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:15] 19:D1:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:15][924913][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:15][925943][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:15][925943][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:15]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:15]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:15]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[19:15:15][925945][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:15][925946][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:15][925947][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:15][925947][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:15][925948][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 15 size: 16
[19:15:15][925948][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:15][925948][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:15][925949][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:15][925949][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:15][925949][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:15][925950][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925950][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925950][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925951][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925951][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925951][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925952][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925952][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925953][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925954][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925954][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:15][925955][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:15][925955][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:15][925956][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:15][925956][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:15][925957][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:15][925957][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:15][925958][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:15] 19:D2:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:15][925959][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
[19:15:16][926646][D][ZigbeeCore.cpp:515] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[19:15:16][926647][D][ZigbeeCore.cpp:519] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[19:15:16]APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0019, asdu_length: 19
[19:15:16]APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xbdc3
[19:15:16]APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[19:15:16][926649][I][ZigbeeHandlers.cpp:247] zb_raw_cmd_handler(): cluster id: 0x19, command id: 3
[19:15:16][926649][I][ZigbeeHandlers.cpp:250] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[19:15:16][926650][I][ZigbeeHandlers.cpp:254] zb_raw_cmd_handler(): is common comand 0, disable_default_response 0, is_manuf_specific 0
[19:15:16][926650][I][ZigbeeHandlers.cpp:258] zb_raw_cmd_handler(): manuf_specific 0x0
[19:15:16][926651][I][ZigbeeHandlers.cpp:262] zb_raw_cmd_handler(): RAW bufid: 16 size: 16
[19:15:16][926651][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:16][926651][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x41
[19:15:16][926652][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x11
[19:15:16][926652][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x0A
[19:15:16][926652][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x02
[19:15:16][926653][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926653][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926653][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926654][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926654][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926654][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926655][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926655][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926655][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926656][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926656][I][ZigbeeHandlers.cpp:265] zb_raw_cmd_handler(): 0x00
[19:15:16][926656][I][ZigbeeHandlers.cpp:275] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xbdc3, 0xbdc3, 0x0, 0x0
[19:15:16][926657][I][z2s_devices_table.cpp:6408] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:16][926657][I][z2s_devices_table.cpp:6413] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:16][926658][I][z2s_devices_table.cpp:6421] Z2S_onUpdateDeviceLastRssi(): short addr 0xBDC3, rssi -50
[19:15:16][926659][I][ZigbeeGateway.cpp:3114] zbRawCmdHandler(): ZigbeeGateway custom Image Block Response
[19:15:16][926659][I][ZigbeeGateway.cpp:3139] zbRawCmdHandler(): file offset 0, max_data_size = 0
[19:15:16][926660][I][ZigbeeGateway.cpp:3162] zbRawCmdHandler(): ZCL frame size = 17
[19:15:16] 19:D3:05:00:41:11:0A:02:00:00:00:00:00:00:00:00:00:
[19:15:16][926660][I][ZigbeeHandlers.cpp:299] zb_raw_cmd_handler(): -------------------raw command proccessed-------------------
Miałem to już ostatnio napisać.vajera wrote: Tue Mar 31, 2026 4:26 pmUtrata pliku z tabelą kanałów powoduje globalny channel conflict - biała dioda szybko mruga, ale to nie jest tryb konfiguracyjny.LukiSpajder wrote: Tue Mar 31, 2026 4:20 pmPo usunięciu tych danych bramka jest w trybie konfiguracyjnym ?vajera wrote: Tue Mar 31, 2026 2:07 pm Uwaga - restart bramki (również z poziomu Cloud/GUI) w trakcie aktywnej operacji przesyłania pliku OTA mógł w niesprzyjających okolicznościach powodować uszkodzenie pliku przechowującego dane o kanałach bramki. Wersja 1.4.113-31/03/26 wprowadza dodatkowe zabezpieczenie przed takim wydarzeniem, ale jak zawsze zaleca się backup bramki przed operacjami oznaczonymi jako eksperymentalne.
Jeśli tak to w sobotę wyleciały mi dwie produkcyjne bramki , biała dioda mrugała . I można powiedzieć że w tym samym czasie .
Ale przy tylu kombinacjach stwierdziłem że nawet bramka ma dość
Wrzuciłem kopię zapasową i kontynuowałem zabawę
Nawet jeśli nie ma ktoś backupu, to wydaje się, że można sytuację uratować.
Przynajmniej mnie się udało.
I to dwa razy.
Miało to miejsce przy kolejnych wersjach bramki, gdzie testowaliśmy OTA.
Bramka szybko miga na biało a w cloud konflikt kanałów (wszystkich!).
W GUI bramki aktywowałem opcję "Rebuild missing Supla channels on next startup" i wstała jak gdyby nigdy nic ze wszystkimi kanałami.
Jak już pisałem udało się tak dwa razy.
Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036Ja bym raczej obstawiał przypadkową aktualizację przez użytkownika (np. źle wybrane device).vajera wrote: Tue Mar 31, 2026 4:55 pmNie sądzę, żeby ona się zaktualizowała do 1.4.4 przy pomocy pliku OTA od TRVZB - być może od początku miała taki numer.
Nie wiem kiedy była zakupiona ta głowica, ale soft 1.4.4. jest stosunkowo nowy.
Nie zdziwiłbym się, jakby przyszła z 1.4.1., ale z 1.4.4. raczej nie.
No chyba, że była zakupiona w ciągu ostatnich 1-2 miesięcy...
Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018 Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Sugerujesz, że Avatto TRV06 łyknęło firmware od TRVZB?Zibi_007 wrote: Tue Mar 31, 2026 5:30 pmJa bym raczej obstawiał przypadkową aktualizację przez użytkownika (np. źle wybrane device).
Nie wiem kiedy była zakupiona ta głowica, ale soft 1.4.4. jest stosunkowo nowy.
Nie zdziwiłbym się, jakby przyszła z 1.4.1., ale z 1.4.4. raczej nie.
No chyba, że była zakupiona w ciągu ostatnich 1-2 miesięcy...
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Przyznam szczerze, że to ja dzisiaj, po raz pierwszy od dawna, zgubiłem wątek.vajera wrote: Tue Mar 31, 2026 5:31 pmSugerujesz, że Avatto TRV06 łyknęło firmware od TRVZB?Zibi_007 wrote: Tue Mar 31, 2026 5:30 pmJa bym raczej obstawiał przypadkową aktualizację przez użytkownika (np. źle wybrane device).vajera wrote: Tue Mar 31, 2026 4:55 pm
Nie sądzę, żeby ona się zaktualizowała do 1.4.4 przy pomocy pliku OTA od TRVZB - być może od początku miała taki numer.
Nie wiem kiedy była zakupiona ta głowica, ale soft 1.4.4. jest stosunkowo nowy.
Nie zdziwiłbym się, jakby przyszła z 1.4.1., ale z 1.4.4. raczej nie.
No chyba, że była zakupiona w ciągu ostatnich 1-2 miesięcy...
Oczywiście, że nie. Avatto TRV06 nie mogło łyknąć firmware od TRV Sonoffa.
Napiszę nawet więcej. Nie wierzę, że to Avatto ma akurat taki numer softu.
Wierzę natomiast w to, że bramka wyświetla numer softu TRV przy device Avatto.
I to jest jedyne (logiczne - a może i nie) wytłumaczenie.
Ja po prostu nie :"zczaiłem", że chodzi o TRV06 i TRV Sonoffa. Myślałem, ze cały czas piszemy o tych drugich
Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018 Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036A i przy okazji.
Czy komukolwiek udało się odczytać normalną wersję firmware Avatto? (Nie 1.4.4.)
Teraz mam tylko jedną "na stanie" i próba odczytu wersji firmware kończy się niczym.
Wybudzam, pobudzam, resetuję i nic.
A jak do tego dołączę odczyt mocy sygnału to się bramka resetuje...
Czy komukolwiek udało się odczytać normalną wersję firmware Avatto? (Nie 1.4.4.
)Teraz mam tylko jedną "na stanie" i próba odczytu wersji firmware kończy się niczym.
Wybudzam, pobudzam, resetuję i nic.
A jak do tego dołączę odczyt mocy sygnału to się bramka resetuje...
Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018 Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036@Mario78, zrób tak, jeśli możesz:
- zresetuj bramkę, na której masz Avatto,
- wejdź w GUI,
- odczekaj chwilę i pobudź głowicę do komunikacji (możesz na niej /lub w Supli/ zmienić temperaturę o 1 stopień),
- następnie odczytaj RSSI głowicy,
- teraz wersję firmware.
- wklej tutaj zrzut ekranu, ale tak aby buło widać co to za device.
- zresetuj bramkę, na której masz Avatto,
- wejdź w GUI,
- odczekaj chwilę i pobudź głowicę do komunikacji (możesz na niej /lub w Supli/ zmienić temperaturę o 1 stopień),
- następnie odczytaj RSSI głowicy,
- teraz wersję firmware.
- wklej tutaj zrzut ekranu, ale tak aby buło widać co to za device.
Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018 Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036-
Mario78
- Posts: 409
- Joined: Fri Jan 05, 2024 6:18 am
- Location: Śląsk
- Been thanked: 1 time
Zibi_007 wrote: Tue Mar 31, 2026 7:20 pm @Mario78, zrób tak, jeśli możesz:
- zresetuj bramkę, na której masz Avatto,
- wejdź w GUI,
- odczekaj chwilę i pobudź głowicę do komunikacji (możesz na niej /lub w Supli/ zmienić temperaturę o 1 stopień),
- następnie odczytaj RSSI głowicy,
- teraz wersję firmware.
- wklej tutaj zrzut ekranu, ale tak aby buło widać co to za device.
You do not have the required permissions to view the files attached to this post.