Wsparcie dla liczników z nakładką wM-Bus

miko1282
Posts: 561
Joined: Wed Dec 06, 2017 10:15 pm
Location: Brodnica
Has thanked: 1 time

Post

Kurde czytam i czytam, próbuję to uruchomić ale nie idzie, mam zwykłe esp-32, gdy z gui buildera próbuję uruchomić,

Code: Select all

[
13:43:48]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[13:43:48]wMBus-lib: Initializing
Zatrzymuje się tak, gdy z pliku ze strony 30, w ogóle nie startuje, pomoże ktoś?
Top
miko1282
Posts: 561
Joined: Wed Dec 06, 2017 10:15 pm
Location: Brodnica
Has thanked: 1 time

Post

miko1282 wrote: Thu May 21, 2026 12:09 pm Kurde czytam i czytam, próbuję to uruchomić ale nie idzie, mam zwykłe esp-32, gdy z gui buildera próbuję uruchomić,

Code: Select all

[
13:43:48]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[13:43:48]wMBus-lib: Initializing
Zatrzymuje się tak, gdy z pliku ze strony 30, w ogóle nie startuje, pomoże ktoś?
Po paru zabiegach udało się dojść do czegoś takiego:

Code: Select all

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
[14:37:31]Button[0]::setMulticlickTime: 450
[14:37:31]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[14:37:31]wMBus-lib: Initializing
[14:37:31]wMBus-lib: CC1101 version '20'
[14:37:31]wMBus-lib: CC1101 initialized
[14:37:31]wMBus-lib: Receiver started.
[14:37:31]wMBus-lib: Registered sensors:
[14:37:31]------
[14:37:31]Type:apator162
[14:37:31]Id:07711433
[14:37:31]Key:0000000000000000
[14:37:31]Property:total_water_m3
[14:37:31]------
[14:37:31]Supla - starting initialization
[14:37:31]Storage initialization
[14:37:31]readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
[14:37:31]Storage: Number of sections 1
[14:37:31]Reading section: 0
[14:37:31]readStorage: 7; Read: [3 0 0 FF FF FF FF ]
[14:37:31]Section type: 3; size: 0
[14:37:31]storedCRC 65535, CRC calc 65535
[14:37:31]SuplaConfigManager: config file missing
[14:37:31]Button[0]::onLoadConfig: skip
[14:37:31]Validating storage state section with current device configuration
[14:37:31]Storage state section validation successful
[14:37:31]Button[0]: Initialized: pin 0, pullUp 1, invertLogic 1, state 1
[14:37:31]GUID: A47D2EAEB260EBD37AF6210EA2678903
[14:37:31]Device name: GUI Generic
[14:37:31]Device software version: GG v7.18.14
[14:37:31]Initializing network layer
[14:37:31][Wi-Fi] Network AP/hostname: GUI-GENERIC-5C013BBF1730
[14:37:31]Using Supla protocol version 23
[14:37:31]Current status: [5] SuplaDevice initialized
[14:37:31]Enter normal mode
[14:37:31]WiFi: establishing connection with SSID: "Zumi"
[14:37:31]Connected BSSID: D4:01:C3:0E:DE:A3
[14:37:31]local IP: 192.168.88.143
[14:37:31]subnetMask: 255.255.255.0
[14:37:31]gatewayIP: 192.168.88.1
[14:37:31]Signal strength (RSSI): -52 dBm
[14:37:31]Establishing NOT encrypted connection with: svr111.supla.org (port: 2015)
[14:37:31]Connected via IP 192.168.88.143
[14:37:31]Connected to Supla Server
[14:37:31]Initializing SRPC
[14:37:31]LAST STATE ADDED: Register in progress
[14:37:31]Current status: [10] Register in progress
[14:37:31]Send: [53 55 50 4C 41 17 01 00 00 00 4B 00 00 00 6B 02 00 00 6B 6F 6E 74 61 6B 74 40 6D 69 6B 61 6D 2E 6F 72 67 2E 70 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 D7 5D 7A CB B4 07 C0 E2 E2 7C 0D 42 CF 48 2F EB A4 7D 2E AE B2 60 EB D3 7A F6 21 0E A2 67 89 03 47 55 49 20 47 65 6E 65 72 69 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]CH[0], type: 5010, FuncList: 0x0, function: 330, flags: 0x10000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
[14:37:31]Send: [00 92 13 00 00 00 00 00 00 4A 01 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1C 01 53 55 50 4C 41 ]
[14:37:32]Device registered (activity timeout 120 s, server version: 28, server min version: 1)
[14:37:32]LAST STATE ADDED: Registered and ready
[14:37:32]Current status: [17] Registered and ready
[14:37:32]Changing activity timeout to 30
[14:37:32]Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:37:32]Received new device config
[14:37:32]Sending device config result OK (1)
[14:37:32]Send: [53 55 50 4C 41 17 03 00 00 00 B7 02 00 00 0A 00 00 00 01 00 00 00 00 00 00 00 00 00 ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 03 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
[14:37:32]Activity timeout set to 30 s
[14:37:57]Send: [53 55 50 4C 41 17 04 00 00 00 28 00 00 00 10 00 00 00 A3 01 00 00 00 00 00 00 30 3C 0F 00 00 00 00 00 ]
[14:37:57]Send: [53 55 50 4C 41 ]
[14:37:57]Recv: [53 55 50 4C 41 17 04 00 00 00 32 00 00 00 10 00 00 00 A4 FC 0E 6A 00 00 00 00 09 92 0B 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:22]Send: [53 55 50 4C 41 17 05 00 00 00 28 00 00 00 10 00 00 00 BD 01 00 00 00 00 00 00 07 11 00 00 00 00 00 00 ]
[14:38:22]Send: [53 55 50 4C 41 ]
[14:38:22]Recv: [53 55 50 4C 41 17 05 00 00 00 32 00 00 00 10 00 00 00 BE FC 0E 6A 00 00 00 00 19 4B 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:34]Recv: [53 55 50 4C 41 17 06 00 00 00 F4 01 00 00 08 00 00 00 0F 13 00 00 00 3B 00 00 53 55 50 4C 41 ]
[14:38:34]Send: [53 55 50 4C 41 17 06 00 00 00 FE 01 00 00 32 00 00 00 0F 13 00 00 00 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 58 8F 5C 01 3B BF 17 30 00 00 CC 60 00 00 3F 00 00 00 3F 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:38:34]Send: [53 55 50 4C 41 ]
Co teraz może być problemem ?
Top
[email protected]
Posts: 1584
Joined: Mon Feb 06, 2023 8:56 am
Has thanked: 18 times
Been thanked: 26 times

Post

miko1282 wrote: Thu May 21, 2026 1:11 pm
miko1282 wrote: Thu May 21, 2026 12:09 pm Kurde czytam i czytam, próbuję to uruchomić ale nie idzie, mam zwykłe esp-32, gdy z gui buildera próbuję uruchomić,

Code: Select all

[
13:43:48]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[13:43:48]wMBus-lib: Initializing
Zatrzymuje się tak, gdy z pliku ze strony 30, w ogóle nie startuje, pomoże ktoś?
Po paru zabiegach udało się dojść do czegoś takiego:

Code: Select all

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
[14:37:31]Button[0]::setMulticlickTime: 450
[14:37:31]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[14:37:31]wMBus-lib: Initializing
[14:37:31]wMBus-lib: CC1101 version '20'
[14:37:31]wMBus-lib: CC1101 initialized
[14:37:31]wMBus-lib: Receiver started.
[14:37:31]wMBus-lib: Registered sensors:
[14:37:31]------
[14:37:31]Type:apator162
[14:37:31]Id:07711433
[14:37:31]Key:0000000000000000
[14:37:31]Property:total_water_m3
[14:37:31]------
[14:37:31]Supla - starting initialization
[14:37:31]Storage initialization
[14:37:31]readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
[14:37:31]Storage: Number of sections 1
[14:37:31]Reading section: 0
[14:37:31]readStorage: 7; Read: [3 0 0 FF FF FF FF ]
[14:37:31]Section type: 3; size: 0
[14:37:31]storedCRC 65535, CRC calc 65535
[14:37:31]SuplaConfigManager: config file missing
[14:37:31]Button[0]::onLoadConfig: skip
[14:37:31]Validating storage state section with current device configuration
[14:37:31]Storage state section validation successful
[14:37:31]Button[0]: Initialized: pin 0, pullUp 1, invertLogic 1, state 1
[14:37:31]GUID: A47D2EAEB260EBD37AF6210EA2678903
[14:37:31]Device name: GUI Generic
[14:37:31]Device software version: GG v7.18.14
[14:37:31]Initializing network layer
[14:37:31][Wi-Fi] Network AP/hostname: GUI-GENERIC-5C013BBF1730
[14:37:31]Using Supla protocol version 23
[14:37:31]Current status: [5] SuplaDevice initialized
[14:37:31]Enter normal mode
[14:37:31]WiFi: establishing connection with SSID: "Zumi"
[14:37:31]Connected BSSID: D4:01:C3:0E:DE:A3
[14:37:31]local IP: 192.168.88.143
[14:37:31]subnetMask: 255.255.255.0
[14:37:31]gatewayIP: 192.168.88.1
[14:37:31]Signal strength (RSSI): -52 dBm
[14:37:31]Establishing NOT encrypted connection with: svr111.supla.org (port: 2015)
[14:37:31]Connected via IP 192.168.88.143
[14:37:31]Connected to Supla Server
[14:37:31]Initializing SRPC
[14:37:31]LAST STATE ADDED: Register in progress
[14:37:31]Current status: [10] Register in progress
[14:37:31]Send: [53 55 50 4C 41 17 01 00 00 00 4B 00 00 00 6B 02 00 00 6B 6F 6E 74 61 6B 74 40 6D 69 6B 61 6D 2E 6F 72 67 2E 70 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 D7 5D 7A CB B4 07 C0 E2 E2 7C 0D 42 CF 48 2F EB A4 7D 2E AE B2 60 EB D3 7A F6 21 0E A2 67 89 03 47 55 49 20 47 65 6E 65 72 69 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]CH[0], type: 5010, FuncList: 0x0, function: 330, flags: 0x10000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
[14:37:31]Send: [00 92 13 00 00 00 00 00 00 4A 01 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1C 01 53 55 50 4C 41 ]
[14:37:32]Device registered (activity timeout 120 s, server version: 28, server min version: 1)
[14:37:32]LAST STATE ADDED: Registered and ready
[14:37:32]Current status: [17] Registered and ready
[14:37:32]Changing activity timeout to 30
[14:37:32]Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:37:32]Received new device config
[14:37:32]Sending device config result OK (1)
[14:37:32]Send: [53 55 50 4C 41 17 03 00 00 00 B7 02 00 00 0A 00 00 00 01 00 00 00 00 00 00 00 00 00 ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 03 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
[14:37:32]Activity timeout set to 30 s
[14:37:57]Send: [53 55 50 4C 41 17 04 00 00 00 28 00 00 00 10 00 00 00 A3 01 00 00 00 00 00 00 30 3C 0F 00 00 00 00 00 ]
[14:37:57]Send: [53 55 50 4C 41 ]
[14:37:57]Recv: [53 55 50 4C 41 17 04 00 00 00 32 00 00 00 10 00 00 00 A4 FC 0E 6A 00 00 00 00 09 92 0B 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:22]Send: [53 55 50 4C 41 17 05 00 00 00 28 00 00 00 10 00 00 00 BD 01 00 00 00 00 00 00 07 11 00 00 00 00 00 00 ]
[14:38:22]Send: [53 55 50 4C 41 ]
[14:38:22]Recv: [53 55 50 4C 41 17 05 00 00 00 32 00 00 00 10 00 00 00 BE FC 0E 6A 00 00 00 00 19 4B 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:34]Recv: [53 55 50 4C 41 17 06 00 00 00 F4 01 00 00 08 00 00 00 0F 13 00 00 00 3B 00 00 53 55 50 4C 41 ]
[14:38:34]Send: [53 55 50 4C 41 17 06 00 00 00 FE 01 00 00 32 00 00 00 0F 13 00 00 00 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 58 8F 5C 01 3B BF 17 30 00 00 CC 60 00 00 3F 00 00 00 3F 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:38:34]Send: [53 55 50 4C 41 ]
Co teraz może być problemem ?
No i w czym problem?
Top
miko1282
Posts: 561
Joined: Wed Dec 06, 2017 10:15 pm
Location: Brodnica
Has thanked: 1 time

Post

[email protected] wrote: Thu May 21, 2026 1:36 pm
miko1282 wrote: Thu May 21, 2026 1:11 pm
miko1282 wrote: Thu May 21, 2026 12:09 pm Kurde czytam i czytam, próbuję to uruchomić ale nie idzie, mam zwykłe esp-32, gdy z gui buildera próbuję uruchomić,

Code: Select all

[
13:43:48]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[13:43:48]wMBus-lib: Initializing
Zatrzymuje się tak, gdy z pliku ze strony 30, w ogóle nie startuje, pomoże ktoś?
Po paru zabiegach udało się dojść do czegoś takiego:

Code: Select all

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
[14:37:31]Button[0]::setMulticlickTime: 450
[14:37:31]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[14:37:31]wMBus-lib: Initializing
[14:37:31]wMBus-lib: CC1101 version '20'
[14:37:31]wMBus-lib: CC1101 initialized
[14:37:31]wMBus-lib: Receiver started.
[14:37:31]wMBus-lib: Registered sensors:
[14:37:31]------
[14:37:31]Type:apator162
[14:37:31]Id:07711433
[14:37:31]Key:0000000000000000
[14:37:31]Property:total_water_m3
[14:37:31]------
[14:37:31]Supla - starting initialization
[14:37:31]Storage initialization
[14:37:31]readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
[14:37:31]Storage: Number of sections 1
[14:37:31]Reading section: 0
[14:37:31]readStorage: 7; Read: [3 0 0 FF FF FF FF ]
[14:37:31]Section type: 3; size: 0
[14:37:31]storedCRC 65535, CRC calc 65535
[14:37:31]SuplaConfigManager: config file missing
[14:37:31]Button[0]::onLoadConfig: skip
[14:37:31]Validating storage state section with current device configuration
[14:37:31]Storage state section validation successful
[14:37:31]Button[0]: Initialized: pin 0, pullUp 1, invertLogic 1, state 1
[14:37:31]GUID: A47D2EAEB260EBD37AF6210EA2678903
[14:37:31]Device name: GUI Generic
[14:37:31]Device software version: GG v7.18.14
[14:37:31]Initializing network layer
[14:37:31][Wi-Fi] Network AP/hostname: GUI-GENERIC-5C013BBF1730
[14:37:31]Using Supla protocol version 23
[14:37:31]Current status: [5] SuplaDevice initialized
[14:37:31]Enter normal mode
[14:37:31]WiFi: establishing connection with SSID: "Zumi"
[14:37:31]Connected BSSID: D4:01:C3:0E:DE:A3
[14:37:31]local IP: 192.168.88.143
[14:37:31]subnetMask: 255.255.255.0
[14:37:31]gatewayIP: 192.168.88.1
[14:37:31]Signal strength (RSSI): -52 dBm
[14:37:31]Establishing NOT encrypted connection with: svr111.supla.org (port: 2015)
[14:37:31]Connected via IP 192.168.88.143
[14:37:31]Connected to Supla Server
[14:37:31]Initializing SRPC
[14:37:31]LAST STATE ADDED: Register in progress
[14:37:31]Current status: [10] Register in progress
[14:37:31]Send: [53 55 50 4C 41 17 01 00 00 00 4B 00 00 00 6B 02 00 00 6B 6F 6E 74 61 6B 74 40 6D 69 6B 61 6D 2E 6F 72 67 2E 70 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 D7 5D 7A CB B4 07 C0 E2 E2 7C 0D 42 CF 48 2F EB A4 7D 2E AE B2 60 EB D3 7A F6 21 0E A2 67 89 03 47 55 49 20 47 65 6E 65 72 69 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]CH[0], type: 5010, FuncList: 0x0, function: 330, flags: 0x10000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
[14:37:31]Send: [00 92 13 00 00 00 00 00 00 4A 01 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1C 01 53 55 50 4C 41 ]
[14:37:32]Device registered (activity timeout 120 s, server version: 28, server min version: 1)
[14:37:32]LAST STATE ADDED: Registered and ready
[14:37:32]Current status: [17] Registered and ready
[14:37:32]Changing activity timeout to 30
[14:37:32]Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:37:32]Received new device config
[14:37:32]Sending device config result OK (1)
[14:37:32]Send: [53 55 50 4C 41 17 03 00 00 00 B7 02 00 00 0A 00 00 00 01 00 00 00 00 00 00 00 00 00 ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 03 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
[14:37:32]Activity timeout set to 30 s
[14:37:57]Send: [53 55 50 4C 41 17 04 00 00 00 28 00 00 00 10 00 00 00 A3 01 00 00 00 00 00 00 30 3C 0F 00 00 00 00 00 ]
[14:37:57]Send: [53 55 50 4C 41 ]
[14:37:57]Recv: [53 55 50 4C 41 17 04 00 00 00 32 00 00 00 10 00 00 00 A4 FC 0E 6A 00 00 00 00 09 92 0B 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:22]Send: [53 55 50 4C 41 17 05 00 00 00 28 00 00 00 10 00 00 00 BD 01 00 00 00 00 00 00 07 11 00 00 00 00 00 00 ]
[14:38:22]Send: [53 55 50 4C 41 ]
[14:38:22]Recv: [53 55 50 4C 41 17 05 00 00 00 32 00 00 00 10 00 00 00 BE FC 0E 6A 00 00 00 00 19 4B 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:34]Recv: [53 55 50 4C 41 17 06 00 00 00 F4 01 00 00 08 00 00 00 0F 13 00 00 00 3B 00 00 53 55 50 4C 41 ]
[14:38:34]Send: [53 55 50 4C 41 17 06 00 00 00 FE 01 00 00 32 00 00 00 0F 13 00 00 00 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 58 8F 5C 01 3B BF 17 30 00 00 CC 60 00 00 3F 00 00 00 3F 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:38:34]Send: [53 55 50 4C 41 ]
Co teraz może być problemem ?
No i w czym problem?
W aplikacji nie odczytuje żadnych danych, chyba że ja coś źle czytam, albo nie umiem ustawić dane licznika wpisałem z palca
Top
[email protected]
Posts: 1584
Joined: Mon Feb 06, 2023 8:56 am
Has thanked: 18 times
Been thanked: 26 times

Post

miko1282 wrote: Thu May 21, 2026 3:33 pm
[email protected] wrote: Thu May 21, 2026 1:36 pm
miko1282 wrote: Thu May 21, 2026 1:11 pm
Po paru zabiegach udało się dojść do czegoś takiego:

Code: Select all

,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
[14:37:31]Button[0]::setMulticlickTime: 450
[14:37:31]wMBus-lib: Initializing with GPIO: 23,19,22,5,4,15 GPIO
[14:37:31]wMBus-lib: Initializing
[14:37:31]wMBus-lib: CC1101 version '20'
[14:37:31]wMBus-lib: CC1101 initialized
[14:37:31]wMBus-lib: Receiver started.
[14:37:31]wMBus-lib: Registered sensors:
[14:37:31]------
[14:37:31]Type:apator162
[14:37:31]Id:07711433
[14:37:31]Key:0000000000000000
[14:37:31]Property:total_water_m3
[14:37:31]------
[14:37:31]Supla - starting initialization
[14:37:31]Storage initialization
[14:37:31]readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
[14:37:31]Storage: Number of sections 1
[14:37:31]Reading section: 0
[14:37:31]readStorage: 7; Read: [3 0 0 FF FF FF FF ]
[14:37:31]Section type: 3; size: 0
[14:37:31]storedCRC 65535, CRC calc 65535
[14:37:31]SuplaConfigManager: config file missing
[14:37:31]Button[0]::onLoadConfig: skip
[14:37:31]Validating storage state section with current device configuration
[14:37:31]Storage state section validation successful
[14:37:31]Button[0]: Initialized: pin 0, pullUp 1, invertLogic 1, state 1
[14:37:31]GUID: A47D2EAEB260EBD37AF6210EA2678903
[14:37:31]Device name: GUI Generic
[14:37:31]Device software version: GG v7.18.14
[14:37:31]Initializing network layer
[14:37:31][Wi-Fi] Network AP/hostname: GUI-GENERIC-5C013BBF1730
[14:37:31]Using Supla protocol version 23
[14:37:31]Current status: [5] SuplaDevice initialized
[14:37:31]Enter normal mode
[14:37:31]WiFi: establishing connection with SSID: "Zumi"
[14:37:31]Connected BSSID: D4:01:C3:0E:DE:A3
[14:37:31]local IP: 192.168.88.143
[14:37:31]subnetMask: 255.255.255.0
[14:37:31]gatewayIP: 192.168.88.1
[14:37:31]Signal strength (RSSI): -52 dBm
[14:37:31]Establishing NOT encrypted connection with: svr111.supla.org (port: 2015)
[14:37:31]Connected via IP 192.168.88.143
[14:37:31]Connected to Supla Server
[14:37:31]Initializing SRPC
[14:37:31]LAST STATE ADDED: Register in progress
[14:37:31]Current status: [10] Register in progress
[14:37:31]Send: [53 55 50 4C 41 17 01 00 00 00 4B 00 00 00 6B 02 00 00 6B 6F 6E 74 61 6B 74 40 6D 69 6B 61 6D 2E 6F 72 67 2E 70 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 D7 5D 7A CB B4 07 C0 E2 E2 7C 0D 42 CF 48 2F EB A4 7D 2E AE B2 60 EB D3 7A F6 21 0E A2 67 89 03 47 55 49 20 47 65 6E 65 72 69 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]CH[0], type: 5010, FuncList: 0x0, function: 330, flags: 0x10000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
[14:37:31]Send: [00 92 13 00 00 00 00 00 00 4A 01 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:37:31]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1C 01 53 55 50 4C 41 ]
[14:37:32]Device registered (activity timeout 120 s, server version: 28, server min version: 1)
[14:37:32]LAST STATE ADDED: Registered and ready
[14:37:32]Current status: [17] Registered and ready
[14:37:32]Changing activity timeout to 30
[14:37:32]Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 02 00 00 00 AD 02 00 00 1B 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:37:32]Received new device config
[14:37:32]Sending device config result OK (1)
[14:37:32]Send: [53 55 50 4C 41 17 03 00 00 00 B7 02 00 00 0A 00 00 00 01 00 00 00 00 00 00 00 00 00 ]
[14:37:32]Send: [53 55 50 4C 41 ]
[14:37:32]Recv: [53 55 50 4C 41 17 03 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
[14:37:32]Activity timeout set to 30 s
[14:37:57]Send: [53 55 50 4C 41 17 04 00 00 00 28 00 00 00 10 00 00 00 A3 01 00 00 00 00 00 00 30 3C 0F 00 00 00 00 00 ]
[14:37:57]Send: [53 55 50 4C 41 ]
[14:37:57]Recv: [53 55 50 4C 41 17 04 00 00 00 32 00 00 00 10 00 00 00 A4 FC 0E 6A 00 00 00 00 09 92 0B 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:22]Send: [53 55 50 4C 41 17 05 00 00 00 28 00 00 00 10 00 00 00 BD 01 00 00 00 00 00 00 07 11 00 00 00 00 00 00 ]
[14:38:22]Send: [53 55 50 4C 41 ]
[14:38:22]Recv: [53 55 50 4C 41 17 05 00 00 00 32 00 00 00 10 00 00 00 BE FC 0E 6A 00 00 00 00 19 4B 00 00 00 00 00 00 53 55 50 4C 41 ]
[14:38:34]Recv: [53 55 50 4C 41 17 06 00 00 00 F4 01 00 00 08 00 00 00 0F 13 00 00 00 3B 00 00 53 55 50 4C 41 ]
[14:38:34]Send: [53 55 50 4C 41 17 06 00 00 00 FE 01 00 00 32 00 00 00 0F 13 00 00 00 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 58 8F 5C 01 3B BF 17 30 00 00 CC 60 00 00 3F 00 00 00 3F 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
[14:38:34]Send: [53 55 50 4C 41 ]
Co teraz może być problemem ?
No i w czym problem?
W aplikacji nie odczytuje żadnych danych, chyba że ja coś źle czytam, albo nie umiem ustawić dane licznika wpisałem z palca
Na pewno klucz masz za krótki, mają być 32 zera
a z loga wynika że prostu nic jeszcze nie przyszło
Top
miko1282
Posts: 561
Joined: Wed Dec 06, 2017 10:15 pm
Location: Brodnica
Has thanked: 1 time

Post

W terminalu będzie tekst w postaci jawnej ?
Top
[email protected]
Posts: 1584
Joined: Mon Feb 06, 2023 8:56 am
Has thanked: 18 times
Been thanked: 26 times

Post

miko1282 wrote: Thu May 21, 2026 4:53 pm W terminalu będzie tekst w postaci jawnej ?
Tak, będą logi z parsowania, popatrz sobie wyżej w temacie jakie koledzy załączali.
Top
miko1282
Posts: 561
Joined: Wed Dec 06, 2017 10:15 pm
Location: Brodnica
Has thanked: 1 time

Post

Leży pół dnia 2m od licznika i niestety nic na terminalu nie ma,ani w aplikacji, RTL'em odbierałem z wnętrza domu w dzień co około 1min i w godzinach popołudniowych co 30min może coś z czymś się zakłócać?
Top
[email protected]
Posts: 1584
Joined: Mon Feb 06, 2023 8:56 am
Has thanked: 18 times
Been thanked: 26 times

Post

A zrób zdjęcie jak masz to podłączone i tak żeby było widać model ESP i chip CC1101
Top
miko1282
Posts: 561
Joined: Wed Dec 06, 2017 10:15 pm
Location: Brodnica
Has thanked: 1 time

Post

IMG_20260521_203402.jpg
IMG_20260521_203424.jpg
IMG_20260521_203430.jpg
You do not have the required permissions to view the files attached to this post.
Top

Return to “GUI Generic”