dodanie ds18b20

QLQ
Posts: 2512
Joined: Sun Sep 03, 2017 9:13 am

Post

qba93 wrote: Sat Jul 06, 2019 8:09 pm
piomar2 wrote: Sat Jul 06, 2019 8:04 pm Ja nie bardzo teraz rozumiem. Kod był do czujnika odległości i chodziło o dodanie DS18B20 . To skąd teraz BME280?
Tak jak na PW CI napisałem popełniłem błąd wstawiając nie ten kod ten jest od czegoś innego, żly kod dałem tu jest poprawny z czujnikiem cisnienia

Code: Select all

Hej jestem głupszy od dziurawego sandała nie ten kod na forum wkleiłem.Chciałem dodać do tego

/**
  Supla.org NodeMCU WiFi minimal example
  Author: Programistyk - Kamil Kaminski <[email protected]>

  This example shows how to configure SuplaDevice for building for NodeMCU within Arduino IDE
*/
#define LIGHTSENSORPIN A0 //Ambient light sensor reading
#include <BH1750FVI.h>
#include <srpc.h>
#include <log.h>
#include <eh.h>
#include <proto.h>
#include <IEEE754tools.h>
// We define our own ethernet layer
#define SUPLADEVICE_CPP
#include <SuplaDevice.h>
#include <lck.h>

#include <WiFiClient.h>
#include <ESP8266WiFiType.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiScan.h>
#include <ESP8266WiFiMulti.h>
#include <WiFiServer.h>
#include <ESP8266WiFiGeneric.h>
#include <WiFiClientSecure.h>
#include <ESP8266WiFiAP.h>
#include <ESP8266WiFiSTA.h>
#include <WiFiUdp.h>
#include <Wire.h>
#include <OneWire.h>
#include <DallasTemperature.h>

#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
#define OLED_RESET 0
Adafruit_SSD1306 display(OLED_RESET); // GPIO5 - SCL , GPIO4 -SDA

String light;


#define SEALEVELPRESSURE_HPA (1023.0)

Adafruit_BME280 bme; // I2C

#define NUMFLAKES 10
#define XPOS 0
#define YPOS 1
#define DELTAY 2

BH1750FVI LightSensor(BH1750FVI::k_DevModeContLowRes);
#define LOGO32_GLCD_HEIGHT 32
#define LOGO32_GLCD_WIDTH  32
static const unsigned char PROGMEM temp_glcd_bmp[] =
{ // temp_home
  0x00, 0x03, 0xc0, 0x00, 0x00, 0x04, 0x20, 0x00, 0x00, 0x08, 0x10, 0x00, 0x00, 0x08, 0x50, 0x00,
  0x00, 0x08, 0x50, 0x00, 0x00, 0x08, 0x50, 0x00, 0x00, 0x08, 0x10, 0x00, 0x00, 0x09, 0x50, 0x00,
  0x00, 0x08, 0xd0, 0x00, 0x00, 0x0b, 0x10, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00,
  0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00,
  0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00,
  0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x17, 0xe8, 0x00,
  0x00, 0x2f, 0xf4, 0x00, 0x00, 0x2f, 0x94, 0x00, 0x00, 0x2f, 0xb4, 0x00, 0x00, 0x2f, 0xf4, 0x00,
  0x00, 0x07, 0xe0, 0x00, 0x00, 0x13, 0xc8, 0x00, 0x00, 0x08, 0x10, 0x00, 0x00, 0x03, 0xc0, 0x00
};



static const unsigned char PROGMEM pressure_glcd_bmp[] =
{
  // 'pressure'
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00,
  0x01, 0xc1, 0xc1, 0xf8, 0x03, 0xc3, 0xc1, 0xf8, 0x03, 0x83, 0x81, 0xf8, 0x03, 0x03, 0x00, 0x18,
  0x07, 0x07, 0x00, 0x18, 0x07, 0x07, 0x00, 0xf8, 0x07, 0x07, 0x00, 0xf8, 0x07, 0x07, 0x00, 0xf8,
  0x07, 0x07, 0x00, 0x18, 0x03, 0x03, 0x00, 0x18, 0x03, 0x83, 0x80, 0x18, 0x03, 0x83, 0x81, 0xf8,
  0x03, 0x83, 0x81, 0xf8, 0x03, 0x83, 0x80, 0x18, 0x01, 0x81, 0x80, 0x18, 0x01, 0x81, 0x80, 0x18,
  0x03, 0x83, 0x80, 0xf8, 0x03, 0x83, 0x80, 0xf8, 0x03, 0x83, 0x80, 0xf8, 0x13, 0x93, 0x80, 0x18,
  0x1f, 0x1f, 0x00, 0x18, 0x1f, 0x1f, 0x01, 0xf8, 0x1e, 0x1e, 0x01, 0xf8, 0x1f, 0x1f, 0x01, 0xf8,
  0x1f, 0x9f, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

static const unsigned char PROGMEM humidity_glcd_bmp[] =
{

  0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00,
  0x00, 0xfc, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x01, 0xce, 0x00, 0x00, 0x03, 0xcf, 0x00, 0x00,
  0x03, 0x87, 0x00, 0x00, 0x07, 0x87, 0x80, 0x00, 0x07, 0x03, 0x80, 0x00, 0x0e, 0x01, 0xc0, 0x00,
  0x1e, 0x01, 0xe0, 0x00, 0x1c, 0x00, 0xe0, 0x00, 0x38, 0x00, 0x70, 0x00, 0x78, 0x00, 0x78, 0x00,
  0x70, 0x80, 0x38, 0x00, 0x61, 0x48, 0x18, 0x00, 0xe2, 0x48, 0x1c, 0x00, 0xe3, 0x50, 0x1c, 0x00,
  0xe1, 0xa0, 0x1c, 0x00, 0xe0, 0x2a, 0x1c, 0x00, 0xe0, 0x52, 0x1c, 0x00, 0xe0, 0x92, 0x1c, 0x00,
  0x60, 0x8c, 0x18, 0x00, 0x70, 0x00, 0x38, 0x00, 0x38, 0x00, 0x70, 0x00, 0x3c, 0x00, 0xf0, 0x00,
  0x1e, 0x01, 0xe0, 0x00, 0x0f, 0xff, 0xc0, 0x00, 0x07, 0xff, 0x80, 0x00, 0x00, 0xfc, 0x00, 0x00
};

static const unsigned char PROGMEM rain_glcd_bmp[] =
{
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0xF3, 0xE0, 0x00, // ····██·██▌······
  0x01, 0x8E, 0x18, 0x00, // ···▐▌·█▌·▐▌·····
  0x03, 0x0C, 0x08, 0x00, // ···█··█···▌·····
  0x04, 0x38, 0x0F, 0x00, // ··▐··█▌···██····
  0x08, 0x28, 0x11, 0x80, // ··▌··▌▌··▐·▐▌···
  0x10, 0x40, 0x00, 0xC0, // ·▐··▐·······█···
  0x10, 0x80, 0x00, 0x40, // ·▐··▌·······▐···
  0x0F, 0x00, 0x00, 0x40, // ··██········▐···
  0x01, 0x00, 0x00, 0x40, // ···▐········▐···
  0x01, 0x00, 0x00, 0x80, // ···▐········▌···
  0x00, 0xFF, 0xFF, 0x00, // ····████████····
  0x00, 0x14, 0x96, 0x00, // ·····▐▐·▌▐▐▌····
  0x00, 0x24, 0xA4, 0x00, // ·····▌▐·▌▌▐·····
  0x00, 0x21, 0x0C, 0x00, // ·····▌·▐··█·····
  0x00, 0x40, 0x08, 0x00, // ····▐·····▌·····
  0x00, 0x10, 0x80, 0x00, // ·····▐··▌·······
  0x00, 0x10, 0x80, 0x00, // ·····▐··▌·······
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00 // ················
};

static const unsigned char PROGMEM lux_glcd_bmp[] =
{


  0x00, 0x01, 0xC0, 0x00, // ·······▐█·······
  0x00, 0x01, 0xC0, 0x00, // ·······▐█·······
  0x00, 0xC1, 0xC1, 0x80, // ····█··▐█··▐▌···
  0x00, 0xE1, 0xC3, 0x80, // ····█▌·▐█··█▌···
  0x00, 0x71, 0xC7, 0x00, // ····▐█·▐█·▐█····
  0x00, 0x70, 0x87, 0x00, // ····▐█··▌·▐█····
  0x00, 0x30, 0x06, 0x00, // ·····█····▐▌····
  0x18, 0x07, 0xF0, 0x0C, // ·▐▌···▐███····█·
  0x3E, 0x1F, 0xF8, 0x3C, // ·██▌·▐████▌··██·
  0x1F, 0x3F, 0x7E, 0x78, // ·▐██·███▐██▌▐█▌·
  0x07, 0x78, 0x0E, 0x70, // ··▐█▐█▌···█▌▐█··
  0x00, 0x70, 0x07, 0x00, // ····▐█····▐█····
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x7C, 0xC0, 0x03, 0x9F, // ▐██·█······█▌▐██
  0xFE, 0xC0, 0x01, 0xBF, // ███▌█······▐▌███
  0x7C, 0xC0, 0x01, 0x9F, // ▐██·█······▐▌▐██
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x00, 0x70, 0x07, 0x00, // ····▐█····▐█····
  0x07, 0x78, 0x0F, 0x70, // ··▐█▐█▌···██▐█··
  0x0F, 0x3E, 0x3E, 0x78, // ··██·██▌·██▌▐█▌·
  0x1E, 0x1F, 0xFC, 0x3C, // ·▐█▌·▐█████··██·
  0x18, 0x07, 0xF0, 0x0C, // ·▐▌···▐███····█·
  0x00, 0x30, 0x06, 0x00, // ·····█····▐▌····
  0x00, 0x70, 0x87, 0x00, // ····▐█··▌·▐█····
  0x00, 0x71, 0xC7, 0x00, // ····▐█·▐█·▐█····
  0x00, 0xE1, 0xC3, 0x80, // ····█▌·▐█··█▌···
  0x00, 0xC1, 0xC3, 0x80, // ····█··▐█··█▌···
  0x00, 0x01, 0xC1, 0x00, // ·······▐█··▐····
  0x00, 0x01, 0xC0, 0x00, // ·······▐█·······
  0x00, 0x00, 0x80, 0x00 // ········▌·······
};

static const unsigned char PROGMEM logo32_glcd_bmp[] =
{
  // 'logo SUPLA'
  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x03, 0xf8, 0x00, 0x00, 0x07, 0xfc, 0x00, 0x00,
  0x0e, 0x0e, 0x00, 0x00, 0x0c, 0x06, 0x00, 0x00, 0x1c, 0x03, 0x00, 0x00, 0x1c, 0x03, 0x00, 0x00,
  0x1c, 0x03, 0x00, 0x00, 0x0c, 0x07, 0x00, 0x00, 0x0e, 0x0f, 0x80, 0x00, 0x07, 0xfc, 0xe0, 0x00,
  0x03, 0xf8, 0x30, 0x00, 0x00, 0xf0, 0x0d, 0xe0, 0x00, 0x10, 0x07, 0x30, 0x00, 0x18, 0x02, 0x10,
  0x00, 0x18, 0x06, 0x18, 0x00, 0x08, 0x02, 0x10, 0x00, 0x08, 0x03, 0xf0, 0x00, 0x0c, 0x07, 0xc0,
  0x00, 0x04, 0x0c, 0x00, 0x00, 0x04, 0x08, 0x00, 0x00, 0x04, 0x10, 0x00, 0x00, 0x00, 0x20, 0x00,
  0x00, 0x03, 0xc0, 0x00, 0x00, 0x04, 0x40, 0x00, 0x00, 0x0c, 0x20, 0x00, 0x00, 0x0c, 0x20, 0x00,
  0x00, 0x04, 0x40, 0x00, 0x00, 0x03, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
static const unsigned char PROGMEM ASL_glcd_bmp[] =
{
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
  0x00, 0x00, 0x60, 0x00, 0x00, 0x08, 0x21, 0x00, 0x00, 0x0c, 0x03, 0x00, 0x00, 0x00, 0x62, 0x00,
  0x00, 0x1f, 0xf8, 0x00, 0x00, 0x3f, 0x0c, 0x00, 0x00, 0x61, 0x84, 0x00, 0x00, 0xc0, 0xc4, 0xe0,
  0x01, 0xc0, 0xf4, 0x00, 0x03, 0x00, 0x1c, 0x00, 0x06, 0x00, 0x0c, 0x00, 0x06, 0x00, 0x0c, 0x00,
  0x06, 0x10, 0xcd, 0x00, 0x03, 0x10, 0x99, 0x00, 0x01, 0x84, 0x30, 0x00, 0x00, 0x25, 0x00, 0x00,
  0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

char* Message[] = {"This is string 1",
                   "Already initialized",
                   "Cb not assigned",
                   "Invalid GUID",
                   "Unknown server address",
                   "Unknow location ID",
                   "Initialized",
                   "Channel limit exceeded",
                   "Rozlaczony",
                   "Rejstracja w toku",
                   "Iterate fail",
                   "Protocol version error",
                   "Bad credentials",
                   "Temporarily unawaliable",
                   "Location conflict",
                   "Channel conflict",
                   "Polaczony i gotowy",
                   "Device is diasbled",
                   "Location is disabled",
                   "Device limit execeeded"
                  };



#if (SSD1306_LCDHEIGHT != 64)
//#error("Height incorrect, please fix Adafruit_SSD1306.h!");
#endif

// ***** logowanie WiFi ********************************************************************************
WiFiClient client;

// Setup Supla connection
const char* ssid     = "vodafone-DC3C";    // zamiast tych xxx wpisz nazwę sieci WIFI
const char* password = "xxx";  // hasło do sieci wifi

char str[10];
char StatCommStr[25];
int StatCommInt;
byte Icon;
byte FiveSek;




//// ******* BME280 Temperatura i wilgotnosc *********************************

void get_temperature_and_humidity (int channelNumber, double *temp, double *humidity) {

  *temp = bme.readTemperature();
  Serial.print("Temperature = ");
  Serial.print(bme.readTemperature());
  Serial.println(" *C");


  *humidity = bme.readHumidity();
  Serial.print("Humidity = ");
  Serial.print(bme.readHumidity());               // wyremowane dla BMP280
  Serial.println(" %");
  if ( isnan(*temp) || isnan(*humidity) ) {
    *temp = -275;
    *humidity = -1;
  }

}
///***********DESZCZ*******************************************************
double get_rain(int channelNumber, double rain) {

  rain = 10;
  Serial.print("Rain = ");
  Serial.print(rain);
  Serial.println(" mm");
  return  rain;


}



//// ******* Ciśnienie BME 280 *****************************************************
double get_pressure(int channelNumber, double pressure) {

  pressure = bme.readPressure() / 100.0F;
  Serial.print("Pressure = ");
  Serial.print(bme.readPressure() / 100);
  Serial.println(" hPa");
  return  pressure;


}

////******* Natężenie  światła zrobione obsługą czujnika odległości

double get_distance(int channelNumber, double t) {

  // float lux = analogRead(LIGHTSENSORPIN);             //TEMT6000
  double lux = LightSensor.GetLightIntensity();     //BH1750
  t = abs(lux);
  Serial.print("Natezenie swiatla = ");
  Serial.print(LightSensor.GetLightIntensity());
  delay(1250);
  return t;

}


void timer0_ISR (void) {
  FiveSek++;
  if (FiveSek == 5) {
    FiveSek = 0;
    Icon++;
    if (Icon == 6) Icon = 1;
  }
  timer0_write(ESP.getCycleCount() + 80000000L); // 80MHz == 1sec
}

//// ******* Funkcja główna *********************************************************************************
void setup() {

  Serial.begin(9600); //BH1750
  //pinMode(LIGHTSENSORPIN, INPUT);   // dodany czujnik natężenia
  LightSensor.begin();

  noInterrupts();
  timer0_isr_init();
  timer0_attachInterrupt(timer0_ISR);
  timer0_write(ESP.getCycleCount() + 80000000L); // 80MHz == 1sec
  interrupts();

  if (!bme.begin(0x76)) {
    Serial.println("Could not find a valid BME280 sensor, check wiring!");
    while (1);
  }

  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);  // initialize with the I2C addr 0x3C (for the 128x64)

  Icon = 0;

  // Clear the buffer.
  display.clearDisplay();

  // text display tests
  display.setTextSize(3);
  display.setTextColor(WHITE);
  display.setRotation(2);
  display.setCursor(30, 25);
  display.print("SUPLA");
  drawbitmap(logo32_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
  display.display();





  // Replace the falowing GUID
  char GUID[SUPLA_GUID_SIZE] = {0x8B, 0x4A, 0x5B, 0xB5, 0x6B, 0x68, 0x76, 0x5B, 0xF5, 0xEA, 0x9A, 0x8C, 0x73, 0xC6, 0x38, 0x1D};

  //  GUID that you can retrieve from https://www.supla.org/arduino/get-guid

  // Ethernet MAC address
  uint8_t mac[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};

  /*
     Having your device already registered at cloud.supla.org,
     you want to change CHANNEL sequence or remove any of them,
     then you must also remove the device itself from cloud.supla.org.
     Otherwise you will get "Channel conflict!" error.
  */

  // CHANNEL0
  SuplaDevice.addRainSensor(); //deszczu czujnik
  SuplaDevice.addDHT22(); // ten objekt jest tylko po to aby w aplikacji wyświetlic temp i wilgotnosc
  SuplaDevice.addDistanceSensor(); // ten obiekt wyswietla natezenie niestety bez jednostek (LUX)
  SuplaDevice.addPressureSensor();  // cisnienie





  SuplaDevice.setName("czujka");
  SuplaDevice.setStatusFuncImpl(&status_func);

  SuplaDevice.begin(GUID,              // Global Unique Identifier
                    mac,               // Ethernet MAC address
                    "sss",  // SUPLA server address
                    sss4,                 // Location ID
                    "sss");               // Location Password

}


// ***********************************************************************************************************
void loop() {
  SuplaDevice.iterate();
  DisplayTemp();

}

// ****   Obsługa OLED    ****************************************************************************************************

void DisplayTemp() {


  double Light_Intensity = LightSensor.GetLightIntensity();
  int rain = 0.01;

  display.clearDisplay();
  display.setTextSize(3);
  display.setTextColor(WHITE);
  display.setRotation(2);
  display.setCursor(45, 25);

  switch (Icon) {
    case 1:
      display.setTextSize(3);
      display.setCursor(45, 25);
      display.print(bme.readTemperature(), 0);
      display.print((char)247);
      display.println("C");
      drawbitmap(temp_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);

      break;
    case 2:
      display.setTextSize(3);
      display.setCursor(45, 25);
      display.print(bme.readHumidity(), 0);
      display.println("%");
      drawbitmap(humidity_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

    case 3:
      display.setTextSize(2);
      display.setCursor(32, 25);
      display.print(bme.readPressure() / 100.0F, 0);
      display.println(" hPa");
      drawbitmap(pressure_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

    case 4:
      display.setTextSize(2);
      display.setCursor(45, 25);
      display.print(Light_Intensity, 0);
      display.println(" Lux");
      drawbitmap(lux_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

    case 5:
      display.setTextSize(2);
      display.setCursor(19, 29);
      // display.print(rain, 0);
      display.println("0,01 l/m2");
      drawbitmap(rain_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

      /* case 5:
         display.setTextSize(2);
         display.setCursor(45, 25);
         display.print(bme.readAltitude(SEALEVELPRESSURE_HPA), 0);
         display.println(" npm");
         drawbitmap(ASL_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
         break;*/


      //---------------------
  };
  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0, 55);
  display.print(Message[StatCommInt - 1]);
  display.display();
  display.display();

}; //DisplayTemp

void drawbitmap(const uint8_t *bitmap, uint8_t w, uint8_t h) {
  uint8_t icons[NUMFLAKES][3];

  display.drawBitmap(0, 0, bitmap, w, h, WHITE);
} //drawbitmap


// Supla.org ethernet layer
int supla_arduino_tcp_read(void *buf, int count) {
  _supla_int_t size = client.available();

  if ( size > 0 ) {
    if ( size > count ) size = count;
    return client.read((uint8_t *)buf, size);
  };

  return -1;
};

int supla_arduino_tcp_write(void *buf, int count) {
  return client.write((const uint8_t *)buf, count);
};

bool supla_arduino_svr_connect(const char *server, int port) {
  return client.connect(server, 2015);
}

bool supla_arduino_svr_connected(void) {
  return client.connected();
}

void supla_arduino_svr_disconnect(void) {
  client.stop();
}

void supla_arduino_eth_setup(uint8_t mac[6], IPAddress *ip) {

  // Serial.println("WiFi init");
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  // Serial.print("\nlocalIP: ");
  // Serial.println(WiFi.localIP());
  //Serial.print("subnetMask: ");
  // Serial.println(WiFi.subnetMask());
  //Serial.print("gatewayIP: ");
  //Serial.println(WiFi.gatewayIP());
}

SuplaDeviceCallbacks supla_arduino_get_callbacks(void) {
  SuplaDeviceCallbacks cb;

  cb.tcp_read = &supla_arduino_tcp_read;
  cb.tcp_write = &supla_arduino_tcp_write;
  cb.eth_setup = &supla_arduino_eth_setup;
  cb.svr_connected = &supla_arduino_svr_connected;
  cb.svr_connect = &supla_arduino_svr_connect;
  cb.svr_disconnect = &supla_arduino_svr_disconnect;
  cb.get_rain = get_rain;
  cb.get_temperature_and_humidity = get_temperature_and_humidity;
  cb.get_pressure = get_pressure;
  cb.get_temperature = NULL;
  cb.get_rgbw_value = NULL;
  cb.set_rgbw_value = NULL;
  cb.get_distance = get_distance;

  return cb;
}



void status_func(int status, const char *msg) {
  Serial.print("Status : ");
  Serial.print(status);
  StatCommInt = status;
  Serial.print(" - ");
  Serial.println(Message[StatCommInt - 1]);
  display.fillRect(0, 55, 128, 65, BLACK);

  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setRotation(2);
  display.setCursor(0, 55);
  display.print(Message[StatCommInt - 1]);
  display.display();

}
Proszę z GUI po 192.162.4.1 -zamień tylko w libraries w Arduino nowe SuplaDevice i dorzuć SuplaGUI z tąd: (pierwszy post )- viewtopic.php?f=6&t=4957

ew tu masz bin do WeMos D1 mini:
Primary_GUI_BME.rar

Code: Select all

/* *************************************************************************
 *  
 * Dzieki kolegom @wojtas567 i @Duch__ powstała ta wersja. 
 *  
 * 
 * Wszystkie potrzebne modyfikacja znajdują się w pliku "supla_settings.h" 
 *  
 * *************************************************************************
 */


#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <ESP8266HTTPUpdateServer.h>

#include <EEPROM.h>
#include <DoubleResetDetector.h> //Bilioteka by Stephen Denne

#define SUPLADEVICE_CPP
#include <SuplaDevice.h>


#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
Adafruit_BME280 bme; // I2C
#include <OneWire.h>
#include <DallasTemperature.h>
#include <DHT.h>
#include <BH1750FVI.h>
BH1750FVI LightSensor(BH1750FVI::k_DevModeContLowRes);

#include "supla_settings.h"
#include "supla_eeprom.h"
#include "supla_web_server.h"

extern "C" {
#include "user_interface.h"
}


#define DRD_TIMEOUT 5// Number of seconds after reset during which a subseqent reset will be considered a double reset.
#define DRD_ADDRESS 0 // RTC Memory Address for the DoubleResetDetector to use
DoubleResetDetector drd(DRD_TIMEOUT, DRD_ADDRESS);

const char* Config_Wifi_name = CONFIG_WIFI_LOGIN;
const char* Config_Wifi_pass = CONFIG_WIFI_PASSWORD;

const char* www_username;
const char* www_password;
const char* update_path = UPDATE_PATH;

WiFiClient client;
ESP8266WebServer httpServer(80);
ESP8266HTTPUpdateServer httpUpdater;
// Setup a DHT instance
DHT dht(DHTPIN, DHTTYPE);
// Setup a DS18B20 instance
OneWire oneWire(DS18B20PIN);
DallasTemperature sensors(&oneWire);
ETSTimer led_timer;

//SUPLA ****************************************************************************************************

char Supla_server[MAX_SUPLA_SERVER];
char Location_id[MAX_SUPLA_ID];
char Location_Pass[MAX_SUPLA_PASS];
//*********************************************************************************************************
void setup() {
  Serial.begin(74880);
  LightSensor.begin(); 
  EEPROM.begin(EEPROM_SIZE);
  dht.begin();
  sensors.begin();
  client.setTimeout(500);

   supla_led_set(LED_CONFIG_PIN);

  if ('1' != char(EEPROM.read(EEPROM_SIZE - 1))) {
    czyszczenieEEPROM();
    first_start();
    save_guid();
  }
  String www_username1 = String(read_login().c_str());
  String www_password1 = String(read_login_pass().c_str());

  www_password = strcpy((char*)malloc(www_password1.length() + 1), www_password1.c_str());
  www_username = strcpy((char*)malloc(www_username1.length() + 1), www_username1.c_str());

  if (drd.detectDoubleReset()) {
    drd.stop();
    gui_color = GUI_GREEN;
    Tryb_konfiguracji();
  }
  else gui_color = GUI_BLUE;

  delay(5000);
  drd.stop();

  //SuplaDevice *********************************************************************************************

  //  SuplaDevice.addRelay(5);
  //  SuplaDevice.addRollerShutterRelays(5, 13);
  //  SuplaDevice.setRollerShutterButtons(0, 14, 12);
  //  SuplaDevice.setRollerShutterFuncImpl(&supla_rs_SavePosition, &supla_rs_LoadPosition, &supla_rs_SaveSettings, &supla_rs_LoadSettings);
  //  SuplaDevice.addSensorNO(4);
   SuplaDevice.addDS18B20Thermometer();
   SuplaDevice.addDHT22();
   SuplaDevice.addPressureSensor();  // cisnienie
   SuplaDevice.addDistanceSensor();

 // SuplaDevice.addRelayButton(5, 14, INPUT_TYPE_BTN_MONOSTABLE, 0, SUPLA_BIT_RELAYFUNC_LIGHTSWITCH);
  //SuplaDevice.addRelayButton(13, 12, INPUT_TYPE_BTN_BISTABLE);

  //*********************************************************************************************************

  //  Pokaz_zawartosc_eeprom();
  read_guid();
  int Location_id = read_supla_id().toInt();
  strcpy(Supla_server, read_supla_server().c_str());
  strcpy(Location_Pass, read_supla_pass().c_str());

  SuplaDevice.setStatusFuncImpl(&status_func);
  if (String(read_wifi_ssid().c_str()) == 0
      || String(read_wifi_pass().c_str()) == 0
      || String(read_login().c_str()) == 0
      || String(read_login_pass().c_str()) == 0
      || String(read_supla_server().c_str()) == 0
      || String(read_supla_id().c_str()) == 0
      || String(read_supla_pass().c_str()) == 0
     ) {

    gui_color = GUI_GREEN;


    Tryb_konfiguracji();
  }

  read_guid();
  my_mac_adress();

  
  SuplaDevice.setStatusFuncImpl(&status_func);
  SuplaDevice.setName(SUPLA_DEVICE_NAME);

  SuplaDevice.begin(GUID,              // Global Unique Identifier
                    mac,               // Ethernet MAC address
                    Supla_server,  // SUPLA server address
                    Location_id,                 // Location ID
                    Location_Pass);
  Serial.println();
  Serial.println("Uruchamianie serwera...");
  WiFi.mode(WIFI_STA);

  createWebServer();

  httpUpdater.setup(&httpServer, UPDATE_PATH, www_username, www_password);
  httpServer.begin();


 if (!bme.begin(0x76)) {
    Serial.println("Could not find a valid BME280 sensor, check wiring!");
    while (1);
    }

}

//*********************************************************************************************************

void loop() {
  if (WiFi.status() != WL_CONNECTED) {
    WiFi_up();
  }
  else httpServer.handleClient();

  
  SuplaDevice.iterate();  

}
//*********************************************************************************************************

// Supla.org ethernet layer
int supla_arduino_tcp_read(void *buf, int count) {
  _supla_int_t size = client.available();

  if ( size > 0 ) {
    if ( size > count ) size = count;
    return client.read((uint8_t *)buf, size);
  };

  return -1;
};

int supla_arduino_tcp_write(void *buf, int count) {
  return client.write((const uint8_t *)buf, count);
};

bool supla_arduino_svr_connect(const char *server, int port) {
  return client.connect(server, 2015);
}

bool supla_arduino_svr_connected(void) {
  return client.connected();
}

void supla_arduino_svr_disconnect(void) {
  client.stop();
}

void supla_arduino_eth_setup(uint8_t mac[6], IPAddress *ip) {
  WiFi_up();
}


SuplaDeviceCallbacks supla_arduino_get_callbacks(void) {
  SuplaDeviceCallbacks cb;

  cb.tcp_read = &supla_arduino_tcp_read;
  cb.tcp_write = &supla_arduino_tcp_write;
  cb.eth_setup = &supla_arduino_eth_setup;
  cb.svr_connected = &supla_arduino_svr_connected;
  cb.svr_connect = &supla_arduino_svr_connect;
  cb.svr_disconnect = &supla_arduino_svr_disconnect;
  cb.get_temperature = &get_temperature;
  cb.get_temperature_and_humidity = &get_temperature_and_humidity;
  cb.get_rgbw_value = NULL;
  cb.set_rgbw_value = NULL;
  cb.get_pressure = get_pressure; 
  cb.get_distance= get_distance;

  return cb;
}
//*********************************************************************************************************

void createWebServer() {

  //  My_mac = my_mac_adress();
  httpServer.on("/", []() {
    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_start(0));
  });

  httpServer.on("/set0", []() {

    save_wifi_ssid(httpServer.arg("wifi_ssid"));
    save_wifi_pass(httpServer.arg("wifi_pass"));
    save_login( httpServer.arg("modul_login"));
    save_login_pass(httpServer.arg("modul_pass"));
    save_supla_server(httpServer.arg("supla_server"));
    save_supla_hostname(httpServer.arg("supla_hostname"));
    save_supla_id(httpServer.arg("supla_id"));
    save_supla_pass(httpServer.arg("supla_pass"));

    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_start(1));
  });

  //************************************************************

  httpServer.on("/firmware_up", []() {
    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_upddate());
  });

  //****************************************************************************************************************************************
  httpServer.on("/reboot", []() {
    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_start(2));
    ESP.reset();
  }
               );
}

//****************************************************************************************************************************************
void Tryb_konfiguracji() {
  supla_led_blinking(LED_CONFIG_PIN, 100);
  my_mac_adress();
  Serial.println("Tryb konfiguracji");

  WiFi.disconnect();
  delay(1000);
  WiFi.mode(WIFI_AP);
  WiFi.softAP(Config_Wifi_name, Config_Wifi_pass);
  delay(1000);
  Serial.println("Tryb AP");
  createWebServer();
  httpServer.begin();
  Serial.println("Start Serwera");
  Modul_tryb_konfiguracji = 2;
  while (1) {
    httpServer.handleClient();
  }
}

void WiFi_up() {
  //  WiFi.setOutputPower(20.5);
  supla_led_blinking(LED_CONFIG_PIN, 500);
  WiFi.disconnect();
  WiFi.hostname(String(read_supla_hostname().c_str()));
  WiFi.softAPdisconnect(true);

  String esid = String(read_wifi_ssid().c_str());
  String epass = String(read_wifi_pass().c_str());
  Serial.println("WiFi init");
  Serial.print("SSID: ");
  Serial.println(esid);
  Serial.print("PASSWORD: ");
  Serial.println(epass);
  WiFi.mode(WIFI_STA);
  WiFi.begin(esid.c_str(), epass.c_str());

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.print("\nlocalIP: ");
  Serial.println(WiFi.localIP());
  Serial.print("subnetMask: ");
  Serial.println(WiFi.subnetMask());
  Serial.print("gatewayIP: ");
  Serial.println(WiFi.gatewayIP());
}

void first_start(void) {
  EEPROM.begin(EEPROM_SIZE);
  delay(100);
  EEPROM.write(EEPROM_SIZE - 1, '1');
  EEPROM.end();
  delay(100);
  save_login(DEFAULT_LOGIN);
  save_login_pass(DEFAULT_PASSWORD);
  save_supla_hostname(DEFAULT_HOSTNAME);

}

String read_rssi(void) {
  long rssi = WiFi.RSSI();
  return String(rssi) ;
}

void get_temperature_and_humidity(int channelNumber, double *temp, double *humidity) {

  *temp = bme.readTemperature();
  *humidity = bme.readHumidity();

  if ( isnan(*temp) || isnan(*humidity) ) {
    *temp = -275;
    *humidity = -1;
  }
}

double get_temperature(int channelNumber, double last_val) {
  double t = -275;
  if ( sensors.getDeviceCount() > 0 ) {
    sensors.requestTemperatures();
    t = sensors.getTempCByIndex(0);
  }
  return t;
}

double get_pressure(int channelNumber, double pressure) {
   
 pressure = bme.readPressure() / 100.0F;
    Serial.print("Pressure = ");
    Serial.print(bme.readPressure()/100);
    Serial.println(" hPa");
   return  pressure;   
  }

double get_distance(int channelNumber, double t) {

 // float lux = analogRead(LIGHTSENSORPIN);             //TEMT6000
   double lux = LightSensor.GetLightIntensity();     //BH1750
    t = abs(lux);
    Serial.print("Natezenie swiatla = ");
    Serial.print(LightSensor.GetLightIntensity());
    delay(1250);
    return t;
  }  

void supla_led_blinking_func(void *timer_arg) {
  int val = digitalRead(LED_CONFIG_PIN);
  digitalWrite(LED_CONFIG_PIN, val == HIGH ? 0 : 1);
}

void supla_led_blinking(int led, int time) {

  os_timer_disarm(&led_timer);
  os_timer_setfn(&led_timer, supla_led_blinking_func, NULL);
  os_timer_arm (&led_timer, time, true);

}

void supla_led_blinking_stop(void) {
  os_timer_disarm(&led_timer);
  digitalWrite(LED_CONFIG_PIN, 0);
}
void supla_led_set(int ledPin) {
  pinMode(ledPin, OUTPUT);
  digitalWrite(ledPin, 1);
}
You do not have the required permissions to view the files attached to this post.
jak coś nie działa to włącz zasilanie.....
Top
piomar2
Posts: 369
Joined: Fri Apr 26, 2019 5:32 pm
Location: Bukowice

Post

No jasne! Odsyłam Ciebie do viewtopic.php?f=6&t=4957. Tam chłopy są mocno w temacie BME280. Może pomogą.
Top
QLQ
Posts: 2512
Joined: Sun Sep 03, 2017 9:13 am

Post

piomar2 wrote: Sat Jul 06, 2019 8:18 pm No jasne! Odsyłam Ciebie do viewtopic.php?f=6&t=4957. Tam chłopy są mocno w temacie BME280. Może pomogą.
Między czasie miałem już zrobione . Ds też na D4 - gpio2. Bme i bh1750 bez Zmian na D2 i d1
jak coś nie działa to włącz zasilanie.....
Top
qba93
Posts: 138
Joined: Thu Apr 18, 2019 10:09 pm

Post

ehh coś nie działa mi z tego bin ani arduino ale ten poprzedni kod normalnie działa ...
Top
Patryk
Posts: 2944
Joined: Mon Jan 07, 2019 7:51 pm
Location: Rybnik

Post

qba93 wrote: Sat Jul 06, 2019 8:47 pm ehh coś nie działa mi z tego bin ani arduino ale ten poprzedni kod normalnie działa ...
Może się mylę, ale chyba nie ma tam zdefiniowanego GPIO dla DS-a.
viewtopic.php?p=44710#p44710
Top
qba93
Posts: 138
Joined: Thu Apr 18, 2019 10:09 pm

Post

nie kumam gdzie w tym kodzie wpisać ustawienia wifi

Code: Select all

/* *************************************************************************
 *  
 * Dzieki kolegom @wojtas567 i @Duch__ powstała ta wersja. 
 *  
 * 
 * Wszystkie potrzebne modyfikacja znajdują się w pliku "supla_settings.h" 
 *  
 * *************************************************************************
 */


#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ESP8266WebServer.h>
#include <ESP8266HTTPUpdateServer.h>

#include <EEPROM.h>
#include <DoubleResetDetector.h> //Bilioteka by Stephen Denne

#define SUPLADEVICE_CPP
#include <SuplaDevice.h>


#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
Adafruit_BME280 bme; // I2C
#include <OneWire.h>
#include <DallasTemperature.h>
#include <DHT.h>
#include <BH1750FVI.h>
BH1750FVI LightSensor(BH1750FVI::k_DevModeContLowRes);

#include "supla_settings.h"
#include "supla_eeprom.h"
#include "supla_web_server.h"

extern "C" {
#include "user_interface.h"
}


#define DRD_TIMEOUT 5// Number of seconds after reset during which a subseqent reset will be considered a double reset.
#define DRD_ADDRESS 0 // RTC Memory Address for the DoubleResetDetector to use
DoubleResetDetector drd(DRD_TIMEOUT, DRD_ADDRESS);

const char* Config_Wifi_name = CONFIG_WIFI_LOGIN;
const char* Config_Wifi_pass = CONFIG_WIFI_PASSWORD;

const char* www_username;
const char* www_password;
const char* update_path = UPDATE_PATH;

WiFiClient client;
ESP8266WebServer httpServer(80);
ESP8266HTTPUpdateServer httpUpdater;
// Setup a DHT instance
DHT dht(DHTPIN, DHTTYPE);
// Setup a DS18B20 instance
OneWire oneWire(DS18B20PIN);
DallasTemperature sensors(&oneWire);
ETSTimer led_timer;

//SUPLA ****************************************************************************************************

char Supla_server[MAX_SUPLA_SERVER];
char Location_id[MAX_SUPLA_ID];
char Location_Pass[MAX_SUPLA_PASS];
//*********************************************************************************************************
void setup() {
  Serial.begin(74880);
  LightSensor.begin(); 
  EEPROM.begin(EEPROM_SIZE);
  dht.begin();
  sensors.begin();
  client.setTimeout(500);

   supla_led_set(LED_CONFIG_PIN);

  if ('1' != char(EEPROM.read(EEPROM_SIZE - 1))) {
    czyszczenieEEPROM();
    first_start();
    save_guid();
  }
  String www_username1 = String(read_login().c_str());
  String www_password1 = String(read_login_pass().c_str());

  www_password = strcpy((char*)malloc(www_password1.length() + 1), www_password1.c_str());
  www_username = strcpy((char*)malloc(www_username1.length() + 1), www_username1.c_str());

  if (drd.detectDoubleReset()) {
    drd.stop();
    gui_color = GUI_GREEN;
    Tryb_konfiguracji();
  }
  else gui_color = GUI_BLUE;

  delay(5000);
  drd.stop();

  //SuplaDevice *********************************************************************************************

  //  SuplaDevice.addRelay(5);
  //  SuplaDevice.addRollerShutterRelays(5, 13);
  //  SuplaDevice.setRollerShutterButtons(0, 14, 12);
  //  SuplaDevice.setRollerShutterFuncImpl(&supla_rs_SavePosition, &supla_rs_LoadPosition, &supla_rs_SaveSettings, &supla_rs_LoadSettings);
  //  SuplaDevice.addSensorNO(4);
   SuplaDevice.addDS18B20Thermometer();
   SuplaDevice.addDHT22();
   SuplaDevice.addPressureSensor();  // cisnienie
   SuplaDevice.addDistanceSensor();

 // SuplaDevice.addRelayButton(5, 14, INPUT_TYPE_BTN_MONOSTABLE, 0, SUPLA_BIT_RELAYFUNC_LIGHTSWITCH);
  //SuplaDevice.addRelayButton(13, 12, INPUT_TYPE_BTN_BISTABLE);

  //*********************************************************************************************************

  //  Pokaz_zawartosc_eeprom();
  read_guid();
  int Location_id = read_supla_id().toInt();
  strcpy(Supla_server, read_supla_server().c_str());
  strcpy(Location_Pass, read_supla_pass().c_str());

  SuplaDevice.setStatusFuncImpl(&status_func);
  if (String(read_wifi_ssid().c_str()) == 0
      || String(read_wifi_pass().c_str()) == 0
      || String(read_login().c_str()) == 0
      || String(read_login_pass().c_str()) == 0
      || String(read_supla_server().c_str()) == 0
      || String(read_supla_id().c_str()) == 0
      || String(read_supla_pass().c_str()) == 0
     ) {

    gui_color = GUI_GREEN;


    Tryb_konfiguracji();
  }

  read_guid();
  my_mac_adress();

  
  SuplaDevice.setStatusFuncImpl(&status_func);
  SuplaDevice.setName(SUPLA_DEVICE_NAME);

  SuplaDevice.begin(GUID,              // Global Unique Identifier
                    mac,               // Ethernet MAC address
                    Supla_server,  // SUPLA server address
                    Location_id,                 // Location ID
                    Location_Pass);
  Serial.println();
  Serial.println("Uruchamianie serwera...");
  WiFi.mode(WIFI_STA);

  createWebServer();

  httpUpdater.setup(&httpServer, UPDATE_PATH, www_username, www_password);
  httpServer.begin();


 if (!bme.begin(0x76)) {
    Serial.println("Could not find a valid BME280 sensor, check wiring!");
    while (1);
    }

}

//*********************************************************************************************************

void loop() {
  if (WiFi.status() != WL_CONNECTED) {
    WiFi_up();
  }
  else httpServer.handleClient();

  
  SuplaDevice.iterate();  

}
//*********************************************************************************************************

// Supla.org ethernet layer
int supla_arduino_tcp_read(void *buf, int count) {
  _supla_int_t size = client.available();

  if ( size > 0 ) {
    if ( size > count ) size = count;
    return client.read((uint8_t *)buf, size);
  };

  return -1;
};

int supla_arduino_tcp_write(void *buf, int count) {
  return client.write((const uint8_t *)buf, count);
};

bool supla_arduino_svr_connect(const char *server, int port) {
  return client.connect(server, 2015);
}

bool supla_arduino_svr_connected(void) {
  return client.connected();
}

void supla_arduino_svr_disconnect(void) {
  client.stop();
}

void supla_arduino_eth_setup(uint8_t mac[6], IPAddress *ip) {
  WiFi_up();
}


SuplaDeviceCallbacks supla_arduino_get_callbacks(void) {
  SuplaDeviceCallbacks cb;

  cb.tcp_read = &supla_arduino_tcp_read;
  cb.tcp_write = &supla_arduino_tcp_write;
  cb.eth_setup = &supla_arduino_eth_setup;
  cb.svr_connected = &supla_arduino_svr_connected;
  cb.svr_connect = &supla_arduino_svr_connect;
  cb.svr_disconnect = &supla_arduino_svr_disconnect;
  cb.get_temperature = &get_temperature;
  cb.get_temperature_and_humidity = &get_temperature_and_humidity;
  cb.get_rgbw_value = NULL;
  cb.set_rgbw_value = NULL;
  cb.get_pressure = get_pressure; 
  cb.get_distance= get_distance;

  return cb;
}
//*********************************************************************************************************

void createWebServer() {

  //  My_mac = my_mac_adress();
  httpServer.on("/", []() {
    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_start(0));
  });

  httpServer.on("/set0", []() {

    save_wifi_ssid(httpServer.arg("wifi_ssid"));
    save_wifi_pass(httpServer.arg("wifi_pass"));
    save_login( httpServer.arg("modul_login"));
    save_login_pass(httpServer.arg("modul_pass"));
    save_supla_server(httpServer.arg("supla_server"));
    save_supla_hostname(httpServer.arg("supla_hostname"));
    save_supla_id(httpServer.arg("supla_id"));
    save_supla_pass(httpServer.arg("supla_pass"));

    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_start(1));
  });

  //************************************************************

  httpServer.on("/firmware_up", []() {
    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_upddate());
  });

  //****************************************************************************************************************************************
  httpServer.on("/reboot", []() {
    if (!httpServer.authenticate(www_username, www_password))
      return httpServer.requestAuthentication();
    httpServer.send(200, "text/html", supla_webpage_start(2));
    ESP.reset();
  }
               );
}

//****************************************************************************************************************************************
void Tryb_konfiguracji() {
  supla_led_blinking(LED_CONFIG_PIN, 100);
  my_mac_adress();
  Serial.println("Tryb konfiguracji");

  WiFi.disconnect();
  delay(1000);
  WiFi.mode(WIFI_AP);
  WiFi.softAP(Config_Wifi_name, Config_Wifi_pass);
  delay(1000);
  Serial.println("Tryb AP");
  createWebServer();
  httpServer.begin();
  Serial.println("Start Serwera");
  Modul_tryb_konfiguracji = 2;
  while (1) {
    httpServer.handleClient();
  }
}

void WiFi_up() {
  //  WiFi.setOutputPower(20.5);
  supla_led_blinking(LED_CONFIG_PIN, 500);
  WiFi.disconnect();
  WiFi.hostname(String(read_supla_hostname().c_str()));
  WiFi.softAPdisconnect(true);

  String esid = String(read_wifi_ssid().c_str());
  String epass = String(read_wifi_pass().c_str());
  Serial.println("WiFi init");
  Serial.print("SSID: ");
  Serial.println(esid);
  Serial.print("PASSWORD: ");
  Serial.println(epass);
  WiFi.mode(WIFI_STA);
  WiFi.begin(esid.c_str(), epass.c_str());

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.print("\nlocalIP: ");
  Serial.println(WiFi.localIP());
  Serial.print("subnetMask: ");
  Serial.println(WiFi.subnetMask());
  Serial.print("gatewayIP: ");
  Serial.println(WiFi.gatewayIP());
}

void first_start(void) {
  EEPROM.begin(EEPROM_SIZE);
  delay(100);
  EEPROM.write(EEPROM_SIZE - 1, '1');
  EEPROM.end();
  delay(100);
  save_login(DEFAULT_LOGIN);
  save_login_pass(DEFAULT_PASSWORD);
  save_supla_hostname(DEFAULT_HOSTNAME);

}

String read_rssi(void) {
  long rssi = WiFi.RSSI();
  return String(rssi) ;
}

void get_temperature_and_humidity(int channelNumber, double *temp, double *humidity) {

  *temp = bme.readTemperature();
  *humidity = bme.readHumidity();

  if ( isnan(*temp) || isnan(*humidity) ) {
    *temp = -275;
    *humidity = -1;
  }
}

double get_temperature(int channelNumber, double last_val) {
  double t = -275;
  if ( sensors.getDeviceCount() > 0 ) {
    sensors.requestTemperatures();
    t = sensors.getTempCByIndex(0);
  }
  return t;
}

double get_pressure(int channelNumber, double pressure) {
   
 pressure = bme.readPressure() / 100.0F;
    Serial.print("Pressure = ");
    Serial.print(bme.readPressure()/100);
    Serial.println(" hPa");
   return  pressure;   
  }

double get_distance(int channelNumber, double t) {

 // float lux = analogRead(LIGHTSENSORPIN);             //TEMT6000
   double lux = LightSensor.GetLightIntensity();     //BH1750
    t = abs(lux);
    Serial.print("Natezenie swiatla = ");
    Serial.print(LightSensor.GetLightIntensity());
    delay(1250);
    return t;
  }  

void supla_led_blinking_func(void *timer_arg) {
  int val = digitalRead(LED_CONFIG_PIN);
  digitalWrite(LED_CONFIG_PIN, val == HIGH ? 0 : 1);
}

void supla_led_blinking(int led, int time) {

  os_timer_disarm(&led_timer);
  os_timer_setfn(&led_timer, supla_led_blinking_func, NULL);
  os_timer_arm (&led_timer, time, true);

}

void supla_led_blinking_stop(void) {
  os_timer_disarm(&led_timer);
  digitalWrite(LED_CONFIG_PIN, 0);
}
void supla_led_set(int ledPin) {
  pinMode(ledPin, OUTPUT);
  digitalWrite(ledPin, 1);
}
Top
Patryk
Posts: 2944
Joined: Mon Jan 07, 2019 7:51 pm
Location: Rybnik

Post

W kodzie jest:
SuplaDevice.addDS18B20Thermometer();

Może się mylę, ale powinno być:
SuplaDevice.addDS18B20Thermometer(2);
Top
qba93
Posts: 138
Joined: Thu Apr 18, 2019 10:09 pm

Post

Pokombinowałem coś sam przy kodzie w supla cloud i aplikacji wykryło ds'a ale nie pokazuje temperatury niby w kodzie mam, ze pod D4 w wemosie podpinam i mam tylko kreski, sprawdzi ktoś mi kod?

Code: Select all

/**
  Supla.org NodeMCU WiFi minimal example
  Author: Programistyk - Kamil Kaminski <[email protected]>

  This example shows how to configure SuplaDevice for building for NodeMCU within Arduino IDE
*/
#define LIGHTSENSORPIN A0 //Ambient light sensor reading
#include <BH1750FVI.h>
#include <srpc.h>
#include <log.h>
#include <eh.h>
#include <proto.h>
#include <IEEE754tools.h>
// We define our own ethernet layer
#define SUPLADEVICE_CPP
#include <SuplaDevice.h>
#include <lck.h>

#include <WiFiClient.h>
#include <ESP8266WiFiType.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiScan.h>
#include <ESP8266WiFiMulti.h>
#include <WiFiServer.h>
#include <ESP8266WiFiGeneric.h>
#include <WiFiClientSecure.h>
#include <ESP8266WiFiAP.h>
#include <ESP8266WiFiSTA.h>
#include <WiFiUdp.h>
#include <Wire.h>
#include <OneWire.h>
#include <DallasTemperature.h>

#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
#define OLED_RESET 0
Adafruit_SSD1306 display(OLED_RESET); // GPIO5 - SCL , GPIO4 -SDA

String light;


#define SEALEVELPRESSURE_HPA (1023.0)

Adafruit_BME280 bme; // I2C

#define NUMFLAKES 10
#define XPOS 0
#define YPOS 1
#define DELTAY 2

BH1750FVI LightSensor(BH1750FVI::k_DevModeContLowRes);
#define LOGO32_GLCD_HEIGHT 32
#define LOGO32_GLCD_WIDTH  32
static const unsigned char PROGMEM temp_glcd_bmp[] =
{ // temp_home
  0x00, 0x03, 0xc0, 0x00, 0x00, 0x04, 0x20, 0x00, 0x00, 0x08, 0x10, 0x00, 0x00, 0x08, 0x50, 0x00,
  0x00, 0x08, 0x50, 0x00, 0x00, 0x08, 0x50, 0x00, 0x00, 0x08, 0x10, 0x00, 0x00, 0x09, 0x50, 0x00,
  0x00, 0x08, 0xd0, 0x00, 0x00, 0x0b, 0x10, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00,
  0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00,
  0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00,
  0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x0b, 0xd0, 0x00, 0x00, 0x17, 0xe8, 0x00,
  0x00, 0x2f, 0xf4, 0x00, 0x00, 0x2f, 0x94, 0x00, 0x00, 0x2f, 0xb4, 0x00, 0x00, 0x2f, 0xf4, 0x00,
  0x00, 0x07, 0xe0, 0x00, 0x00, 0x13, 0xc8, 0x00, 0x00, 0x08, 0x10, 0x00, 0x00, 0x03, 0xc0, 0x00
};



static const unsigned char PROGMEM pressure_glcd_bmp[] =
{
  // 'pressure'
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00,
  0x01, 0xc1, 0xc1, 0xf8, 0x03, 0xc3, 0xc1, 0xf8, 0x03, 0x83, 0x81, 0xf8, 0x03, 0x03, 0x00, 0x18,
  0x07, 0x07, 0x00, 0x18, 0x07, 0x07, 0x00, 0xf8, 0x07, 0x07, 0x00, 0xf8, 0x07, 0x07, 0x00, 0xf8,
  0x07, 0x07, 0x00, 0x18, 0x03, 0x03, 0x00, 0x18, 0x03, 0x83, 0x80, 0x18, 0x03, 0x83, 0x81, 0xf8,
  0x03, 0x83, 0x81, 0xf8, 0x03, 0x83, 0x80, 0x18, 0x01, 0x81, 0x80, 0x18, 0x01, 0x81, 0x80, 0x18,
  0x03, 0x83, 0x80, 0xf8, 0x03, 0x83, 0x80, 0xf8, 0x03, 0x83, 0x80, 0xf8, 0x13, 0x93, 0x80, 0x18,
  0x1f, 0x1f, 0x00, 0x18, 0x1f, 0x1f, 0x01, 0xf8, 0x1e, 0x1e, 0x01, 0xf8, 0x1f, 0x1f, 0x01, 0xf8,
  0x1f, 0x9f, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

static const unsigned char PROGMEM humidity_glcd_bmp[] =
{

  0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00,
  0x00, 0xfc, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x01, 0xce, 0x00, 0x00, 0x03, 0xcf, 0x00, 0x00,
  0x03, 0x87, 0x00, 0x00, 0x07, 0x87, 0x80, 0x00, 0x07, 0x03, 0x80, 0x00, 0x0e, 0x01, 0xc0, 0x00,
  0x1e, 0x01, 0xe0, 0x00, 0x1c, 0x00, 0xe0, 0x00, 0x38, 0x00, 0x70, 0x00, 0x78, 0x00, 0x78, 0x00,
  0x70, 0x80, 0x38, 0x00, 0x61, 0x48, 0x18, 0x00, 0xe2, 0x48, 0x1c, 0x00, 0xe3, 0x50, 0x1c, 0x00,
  0xe1, 0xa0, 0x1c, 0x00, 0xe0, 0x2a, 0x1c, 0x00, 0xe0, 0x52, 0x1c, 0x00, 0xe0, 0x92, 0x1c, 0x00,
  0x60, 0x8c, 0x18, 0x00, 0x70, 0x00, 0x38, 0x00, 0x38, 0x00, 0x70, 0x00, 0x3c, 0x00, 0xf0, 0x00,
  0x1e, 0x01, 0xe0, 0x00, 0x0f, 0xff, 0xc0, 0x00, 0x07, 0xff, 0x80, 0x00, 0x00, 0xfc, 0x00, 0x00
};

static const unsigned char PROGMEM rain_glcd_bmp[] =
{
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0xF3, 0xE0, 0x00, // ····██·██▌······
  0x01, 0x8E, 0x18, 0x00, // ···▐▌·█▌·▐▌·····
  0x03, 0x0C, 0x08, 0x00, // ···█··█···▌·····
  0x04, 0x38, 0x0F, 0x00, // ··▐··█▌···██····
  0x08, 0x28, 0x11, 0x80, // ··▌··▌▌··▐·▐▌···
  0x10, 0x40, 0x00, 0xC0, // ·▐··▐·······█···
  0x10, 0x80, 0x00, 0x40, // ·▐··▌·······▐···
  0x0F, 0x00, 0x00, 0x40, // ··██········▐···
  0x01, 0x00, 0x00, 0x40, // ···▐········▐···
  0x01, 0x00, 0x00, 0x80, // ···▐········▌···
  0x00, 0xFF, 0xFF, 0x00, // ····████████····
  0x00, 0x14, 0x96, 0x00, // ·····▐▐·▌▐▐▌····
  0x00, 0x24, 0xA4, 0x00, // ·····▌▐·▌▌▐·····
  0x00, 0x21, 0x0C, 0x00, // ·····▌·▐··█·····
  0x00, 0x40, 0x08, 0x00, // ····▐·····▌·····
  0x00, 0x10, 0x80, 0x00, // ·····▐··▌·······
  0x00, 0x10, 0x80, 0x00, // ·····▐··▌·······
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00, // ················
  0x00, 0x00, 0x00, 0x00 // ················
};

static const unsigned char PROGMEM lux_glcd_bmp[] =
{


  0x00, 0x01, 0xC0, 0x00, // ·······▐█·······
  0x00, 0x01, 0xC0, 0x00, // ·······▐█·······
  0x00, 0xC1, 0xC1, 0x80, // ····█··▐█··▐▌···
  0x00, 0xE1, 0xC3, 0x80, // ····█▌·▐█··█▌···
  0x00, 0x71, 0xC7, 0x00, // ····▐█·▐█·▐█····
  0x00, 0x70, 0x87, 0x00, // ····▐█··▌·▐█····
  0x00, 0x30, 0x06, 0x00, // ·····█····▐▌····
  0x18, 0x07, 0xF0, 0x0C, // ·▐▌···▐███····█·
  0x3E, 0x1F, 0xF8, 0x3C, // ·██▌·▐████▌··██·
  0x1F, 0x3F, 0x7E, 0x78, // ·▐██·███▐██▌▐█▌·
  0x07, 0x78, 0x0E, 0x70, // ··▐█▐█▌···█▌▐█··
  0x00, 0x70, 0x07, 0x00, // ····▐█····▐█····
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x7C, 0xC0, 0x03, 0x9F, // ▐██·█······█▌▐██
  0xFE, 0xC0, 0x01, 0xBF, // ███▌█······▐▌███
  0x7C, 0xC0, 0x01, 0x9F, // ▐██·█······▐▌▐██
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x00, 0xE0, 0x03, 0x80, // ····█▌·····█▌···
  0x00, 0x70, 0x07, 0x00, // ····▐█····▐█····
  0x07, 0x78, 0x0F, 0x70, // ··▐█▐█▌···██▐█··
  0x0F, 0x3E, 0x3E, 0x78, // ··██·██▌·██▌▐█▌·
  0x1E, 0x1F, 0xFC, 0x3C, // ·▐█▌·▐█████··██·
  0x18, 0x07, 0xF0, 0x0C, // ·▐▌···▐███····█·
  0x00, 0x30, 0x06, 0x00, // ·····█····▐▌····
  0x00, 0x70, 0x87, 0x00, // ····▐█··▌·▐█····
  0x00, 0x71, 0xC7, 0x00, // ····▐█·▐█·▐█····
  0x00, 0xE1, 0xC3, 0x80, // ····█▌·▐█··█▌···
  0x00, 0xC1, 0xC3, 0x80, // ····█··▐█··█▌···
  0x00, 0x01, 0xC1, 0x00, // ·······▐█··▐····
  0x00, 0x01, 0xC0, 0x00, // ·······▐█·······
  0x00, 0x00, 0x80, 0x00 // ········▌·······
};

static const unsigned char PROGMEM logo32_glcd_bmp[] =
{
  // 'logo SUPLA'
  0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x03, 0xf8, 0x00, 0x00, 0x07, 0xfc, 0x00, 0x00,
  0x0e, 0x0e, 0x00, 0x00, 0x0c, 0x06, 0x00, 0x00, 0x1c, 0x03, 0x00, 0x00, 0x1c, 0x03, 0x00, 0x00,
  0x1c, 0x03, 0x00, 0x00, 0x0c, 0x07, 0x00, 0x00, 0x0e, 0x0f, 0x80, 0x00, 0x07, 0xfc, 0xe0, 0x00,
  0x03, 0xf8, 0x30, 0x00, 0x00, 0xf0, 0x0d, 0xe0, 0x00, 0x10, 0x07, 0x30, 0x00, 0x18, 0x02, 0x10,
  0x00, 0x18, 0x06, 0x18, 0x00, 0x08, 0x02, 0x10, 0x00, 0x08, 0x03, 0xf0, 0x00, 0x0c, 0x07, 0xc0,
  0x00, 0x04, 0x0c, 0x00, 0x00, 0x04, 0x08, 0x00, 0x00, 0x04, 0x10, 0x00, 0x00, 0x00, 0x20, 0x00,
  0x00, 0x03, 0xc0, 0x00, 0x00, 0x04, 0x40, 0x00, 0x00, 0x0c, 0x20, 0x00, 0x00, 0x0c, 0x20, 0x00,
  0x00, 0x04, 0x40, 0x00, 0x00, 0x03, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
static const unsigned char PROGMEM ASL_glcd_bmp[] =
{
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00,
  0x00, 0x00, 0x60, 0x00, 0x00, 0x08, 0x21, 0x00, 0x00, 0x0c, 0x03, 0x00, 0x00, 0x00, 0x62, 0x00,
  0x00, 0x1f, 0xf8, 0x00, 0x00, 0x3f, 0x0c, 0x00, 0x00, 0x61, 0x84, 0x00, 0x00, 0xc0, 0xc4, 0xe0,
  0x01, 0xc0, 0xf4, 0x00, 0x03, 0x00, 0x1c, 0x00, 0x06, 0x00, 0x0c, 0x00, 0x06, 0x00, 0x0c, 0x00,
  0x06, 0x10, 0xcd, 0x00, 0x03, 0x10, 0x99, 0x00, 0x01, 0x84, 0x30, 0x00, 0x00, 0x25, 0x00, 0x00,
  0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

char* Message[] = {"This is string 1",
                   "Already initialized",
                   "Cb not assigned",
                   "Invalid GUID",
                   "Unknown server address",
                   "Unknow location ID",
                   "Initialized",
                   "Channel limit exceeded",
                   "Rozlaczony",
                   "Rejstracja w toku",
                   "Iterate fail",
                   "Protocol version error",
                   "Bad credentials",
                   "Temporarily unawaliable",
                   "Location conflict",
                   "Channel conflict",
                   "Polaczony i gotowy",
                   "Device is diasbled",
                   "Location is disabled",
                   "Device limit execeeded"
                  };



#if (SSD1306_LCDHEIGHT != 64)
//#error("Height incorrect, please fix Adafruit_SSD1306.h!");
#endif

// ***** logowanie WiFi ********************************************************************************
WiFiClient client;

// Setup Supla connection
const char* ssid     = "vodafone-DC3C";    // zamiast tych xxx wpisz nazwę sieci WIFI
const char* password = "XX  ";  // hasło do sieci wifi


OneWire oneWire(2);// DS18B20 pin 2 (D4)
DallasTemperature sensors(&oneWire);

double get_temperature(int channelNumber, double last_val) {

    double t = -275;
      if ( sensors.getDeviceCount() > 0 )
      {
       sensors.requestTemperatures();
     t = sensors.getTempCByIndex(0);
      };

      return t;  
}
char str[10];
char StatCommStr[25];
int StatCommInt;
byte Icon;
byte FiveSek;




//// ******* BME280 Temperatura i wilgotnosc *********************************

void get_temperature_and_humidity (int channelNumber, double *temp, double *humidity) {

  *temp = bme.readTemperature();
  Serial.print("Temperature = ");
  Serial.print(bme.readTemperature());
  Serial.println(" *C");


  *humidity = bme.readHumidity();
  Serial.print("Humidity = ");
  Serial.print(bme.readHumidity());               // wyremowane dla BMP280
  Serial.println(" %");
  if ( isnan(*temp) || isnan(*humidity) ) {
    *temp = -275;
    *humidity = -1;
  }

}
///***********DESZCZ*******************************************************
double get_rain(int channelNumber, double rain) {

  rain = 10;
  Serial.print("Rain = ");
  Serial.print(rain);
  Serial.println(" mm");
  return  rain;


}



//// ******* Ciśnienie BME 280 *****************************************************
double get_pressure(int channelNumber, double pressure) {

  pressure = bme.readPressure() / 100.0F;
  Serial.print("Pressure = ");
  Serial.print(bme.readPressure() / 100);
  Serial.println(" hPa");
  return  pressure;


}

////******* Natężenie  światła zrobione obsługą czujnika odległości

double get_distance(int channelNumber, double t) {

  // float lux = analogRead(LIGHTSENSORPIN);             //TEMT6000
  double lux = LightSensor.GetLightIntensity();     //BH1750
  t = abs(lux);
  Serial.print("Natezenie swiatla = ");
  Serial.print(LightSensor.GetLightIntensity());
  delay(1250);
  return t;

}


void timer0_ISR (void) {
  FiveSek++;
  if (FiveSek == 5) {
    FiveSek = 0;
    Icon++;
    if (Icon == 6) Icon = 1;
  }
  timer0_write(ESP.getCycleCount() + 80000000L); // 80MHz == 1sec
}

//// ******* Funkcja główna *********************************************************************************
void setup() {

  Serial.begin(9600); //BH1750
  //pinMode(LIGHTSENSORPIN, INPUT);   // dodany czujnik natężenia
  LightSensor.begin();

sensors.begin();
  sensors.setResolution(12);//rozdzielczość DS-a
  
  noInterrupts();
  timer0_isr_init();
  timer0_attachInterrupt(timer0_ISR);
  timer0_write(ESP.getCycleCount() + 80000000L); // 80MHz == 1sec
  interrupts();

  if (!bme.begin(0x76)) {
    Serial.println("Could not find a valid BME280 sensor, check wiring!");
    while (1);
  }

  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);  // initialize with the I2C addr 0x3C (for the 128x64)

  Icon = 0;

  // Clear the buffer.
  display.clearDisplay();

  // text display tests
  display.setTextSize(3);
  display.setTextColor(WHITE);
  display.setRotation(2);
  display.setCursor(30, 25);
  display.print("SUPLA");
  drawbitmap(logo32_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
  display.display();





  // Replace the falowing GUID
  char GUID[SUPLA_GUID_SIZE] = {0x8B, 0x4A, 0x5B, 0xB5, 0x6B, 0x68, 0x76, 0x5B, 0xF5, 0xEA, 0x9A, 0x8C, 0x73, 0xC6, 0x38, 0x1D};

  //  GUID that you can retrieve from https://www.supla.org/arduino/get-guid

  // Ethernet MAC address
  uint8_t mac[6] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};

  /*
     Having your device already registered at cloud.supla.org,
     you want to change CHANNEL sequence or remove any of them,
     then you must also remove the device itself from cloud.supla.org.
     Otherwise you will get "Channel conflict!" error.
  */

  // CHANNEL0
  SuplaDevice.addRainSensor(); //deszczu czujnik
  SuplaDevice.addDHT22(); // ten objekt jest tylko po to aby w aplikacji wyświetlic temp i wilgotnosc
  SuplaDevice.addDistanceSensor(); // ten obiekt wyswietla natezenie niestety bez jednostek (LUX)
  SuplaDevice.addPressureSensor();  // cisnienie
 SuplaDevice.addDS18B20Thermometer();




  SuplaDevice.setName("czujka");
  SuplaDevice.setStatusFuncImpl(&status_func);

  SuplaDevice.begin(GUID,              // Global Unique Identifier
                    mac,               // Ethernet MAC address
                    "xxx",  // SUPLA server address
                    xxx,                 // Location ID
                    "xxx");               // Location Password

}


// ***********************************************************************************************************
void loop() {
  SuplaDevice.iterate();
  DisplayTemp();

}

// ****   Obsługa OLED    ****************************************************************************************************

void DisplayTemp() {


  double Light_Intensity = LightSensor.GetLightIntensity();
  int rain = 0.01;

  display.clearDisplay();
  display.setTextSize(3);
  display.setTextColor(WHITE);
  display.setRotation(2);
  display.setCursor(45, 25);

  switch (Icon) {
    case 1:
      display.setTextSize(3);
      display.setCursor(45, 25);
      display.print(bme.readTemperature(), 0);
      display.print((char)247);
      display.println("C");
      drawbitmap(temp_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);

      break;
    case 2:
      display.setTextSize(3);
      display.setCursor(45, 25);
      display.print(bme.readHumidity(), 0);
      display.println("%");
      drawbitmap(humidity_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

    case 3:
      display.setTextSize(2);
      display.setCursor(32, 25);
      display.print(bme.readPressure() / 100.0F, 0);
      display.println(" hPa");
      drawbitmap(pressure_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

    case 4:
      display.setTextSize(2);
      display.setCursor(45, 25);
      display.print(Light_Intensity, 0);
      display.println(" Lux");
      drawbitmap(lux_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

    case 5:
      display.setTextSize(2);
      display.setCursor(19, 29);
      // display.print(rain, 0);
      display.println("0,01 l/m2");
      drawbitmap(rain_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
      break;

      /* case 5:
         display.setTextSize(2);
         display.setCursor(45, 25);
         display.print(bme.readAltitude(SEALEVELPRESSURE_HPA), 0);
         display.println(" npm");
         drawbitmap(ASL_glcd_bmp, LOGO32_GLCD_HEIGHT, LOGO32_GLCD_WIDTH);
         break;*/


      //---------------------
  };
  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setCursor(0, 55);
  display.print(Message[StatCommInt - 1]);
  display.display();
  display.display();

}; //DisplayTemp

void drawbitmap(const uint8_t *bitmap, uint8_t w, uint8_t h) {
  uint8_t icons[NUMFLAKES][3];

  display.drawBitmap(0, 0, bitmap, w, h, WHITE);
} //drawbitmap


// Supla.org ethernet layer
int supla_arduino_tcp_read(void *buf, int count) {
  _supla_int_t size = client.available();

  if ( size > 0 ) {
    if ( size > count ) size = count;
    return client.read((uint8_t *)buf, size);
  };

  return -1;
};

int supla_arduino_tcp_write(void *buf, int count) {
  return client.write((const uint8_t *)buf, count);
};

bool supla_arduino_svr_connect(const char *server, int port) {
  return client.connect(server, 2015);
}

bool supla_arduino_svr_connected(void) {
  return client.connected();
}

void supla_arduino_svr_disconnect(void) {
  client.stop();
}

void supla_arduino_eth_setup(uint8_t mac[6], IPAddress *ip) {

  // Serial.println("WiFi init");
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  // Serial.print("\nlocalIP: ");
  // Serial.println(WiFi.localIP());
  //Serial.print("subnetMask: ");
  // Serial.println(WiFi.subnetMask());
  //Serial.print("gatewayIP: ");
  //Serial.println(WiFi.gatewayIP());
}

SuplaDeviceCallbacks supla_arduino_get_callbacks(void) {
  SuplaDeviceCallbacks cb;

  cb.tcp_read = &supla_arduino_tcp_read;
  cb.tcp_write = &supla_arduino_tcp_write;
  cb.eth_setup = &supla_arduino_eth_setup;
  cb.svr_connected = &supla_arduino_svr_connected;
  cb.svr_connect = &supla_arduino_svr_connect;
  cb.svr_disconnect = &supla_arduino_svr_disconnect;
  cb.get_rain = get_rain;
  cb.get_temperature_and_humidity = get_temperature_and_humidity;
  cb.get_temperature = &get_temperature;
  cb.get_pressure = get_pressure;
  cb.get_temperature = NULL;
  cb.get_rgbw_value = NULL;
  cb.set_rgbw_value = NULL;
  cb.get_distance = get_distance;

  return cb;
}



void status_func(int status, const char *msg) {
  Serial.print("Status : ");
  Serial.print(status);
  StatCommInt = status;
  Serial.print(" - ");
  Serial.println(Message[StatCommInt - 1]);
  display.fillRect(0, 55, 128, 65, BLACK);

  display.setTextSize(1);
  display.setTextColor(WHITE);
  display.setRotation(2);
  display.setCursor(0, 55);
  display.print(Message[StatCommInt - 1]);
  display.display();

}
Top
QLQ
Posts: 2512
Joined: Sun Sep 03, 2017 9:13 am

Post

w kodzie masz:

Code: Select all

cb.get_temperature = NULL;
powinno być :

Code: Select all

cb.get_temperature = get_temperature;
jak coś nie działa to włącz zasilanie.....
Top
QLQ
Posts: 2512
Joined: Sun Sep 03, 2017 9:13 am

Post

qba93 wrote: Sat Jul 06, 2019 9:03 pm nie kumam gdzie w tym kodzie wpisać ustawienia wifi
Tam jest manager po 192.168.4.1 wpisujesz w przeglądarce www .

Czujnika w tym kodzie nie ma zadeklarowanego bo jest w Supla_setings.h w katalogu SuplaGui w bibliotekach

Code: Select all

*************************
#define  DHTPIN                0
#define  DHTTYPE               DHT22

//DS18B20 ************************************************************************************************
#define  DS18B20PIN            2

//LED CONFIG *********************************************************************************************
#define LED_CONFIG_PIN         2
jak coś nie działa to włącz zasilanie.....
Top

Return to “Pomoc”