Automatyczny reset - da się?
-
Dawid84
- Posts: 154
- Joined: Mon Jan 14, 2019 12:45 pm
- Location: Piekary Śląskie
To co Elmaya radzil str 15 post nr5 od gory
Pozdrawiam
Dawid
Dawid
-
elmaya
- Posts: 1485
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
it's true, it's fixed for now.kindziol wrote: Sun Dec 01, 2019 8:55 pmTeraz według mnie jest okey. Tylko jak zmieniam pin w cofig i zapisuje to go nie zmienia.elmaya wrote: Sun Dec 01, 2019 8:30 pm I am seeing that there is a problem with a certain Flash model.
flash vendor 85h
precisely the one you have.
This has the time set at 5 minutes.
It will work for you until I see exactly what the problem is with that model.
reset_router_v3_stc15f_v5_DOUT_4Mbit.rar
I have to find a solution to save data for this Flash manufacturer
-
elmaya
- Posts: 1485
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
thanksDawid84 wrote: Sun Dec 01, 2019 9:06 pm Witajcie
Zrobilem tak jak na str.15 radzil Elmaya wgralem ustawilem, zamiast przekaznika wstawilem led i czekalem 5min 15min nic zadnego resetu
It disconnects continuously from WiFi.
I review it thoroughly and answer you
-
Patryk
- Posts: 2944
- Joined: Mon Jan 07, 2019 7:51 pm
- Location: Rybnik
@elmaya
I am always at your service.
I really appreciate your contribution to SUPLA.
I am always at your service.
I really appreciate your contribution to SUPLA.
-
Dawid84
- Posts: 154
- Joined: Mon Jan 14, 2019 12:45 pm
- Location: Piekary Śląskie
Przeoczyłem mój błąd sorry za zamieszanie jutro sprawdze.
Pozdrawiam
Dawid
Dawid
-
Patryk
- Posts: 2944
- Joined: Mon Jan 07, 2019 7:51 pm
- Location: Rybnik
@elmaya
PUYA Flash problem.
PUYA Flash problem.
You do not have the required permissions to view the files attached to this post.
-
kindziol
- Posts: 70
- Joined: Mon Oct 07, 2019 10:28 pm
@elmaya
Chcę Ci podziękować za pomoc w programowaniu i za napisanie programu. Pamiętaj jednak o mnie w sprawie diody, która ma informować o awarii.
pozdrawiam i jeszcze raz dziękuję.
Chcę Ci podziękować za pomoc w programowaniu i za napisanie programu. Pamiętaj jednak o mnie w sprawie diody, która ma informować o awarii.
pozdrawiam i jeszcze raz dziękuję.
-
elmaya
- Posts: 1485
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
@kindziol
With the help of @Patryk, the problem with the Flash of your module has been solved.
With this soft you can change Google to whatever you want and select the restart time in wificonfig.
You have to connect the Led between Gpio2 and Vcc through a resistor.
The builtin LED is connected to Gpio 1 which is the one that controls the relay.
With the help of @Patryk, the problem with the Flash of your module has been solved.
With this soft you can change Google to whatever you want and select the restart time in wificonfig.
You have to connect the Led between Gpio2 and Vcc through a resistor.
The builtin LED is connected to Gpio 1 which is the one that controls the relay.
You do not have the required permissions to view the files attached to this post.
-
kindziol
- Posts: 70
- Joined: Mon Oct 07, 2019 10:28 pm
Tak więc dziękuje również @Patryk za udział w rozwiązaniu problemu.elmaya wrote: Mon Dec 02, 2019 7:18 pm @kindziol
With the help of @Patryk, the problem with the Flash of your module has been solved.
With this soft you can change Google to whatever you want and select the restart time in wificonfig.
You have to connect the Led between Gpio2 and Vcc through a resistor.
The builtin LED is connected to Gpio 1 which is the one that controls the relay.
reset_router_v3_stc15f_delaySel_DOUT_4Mbit_PUYA_Fix.rar
Dziękuje bardzo.