Panowie, ja nie jestem z AGH tylko z SGGW:)
Ale tak na poważnie i w temacie mam prośbę, czy moglibyście mnie trochę nakierować?
Code: Select all
#include <SPI.h>
#include <SuplaDevice.h>
#include <supla/network/esp_wifi.h>
Supla::ESPWifi wifi("xxxx", "xxxx");
#include <WiFiClientSecure.h>
const char* host = "svr31.supla.org";
const int httpsPort = 443;
String url = "";
byte a=0;
char Link_1[40]="/direct/xxx/xxx/toggle";
void setup() {
Serial.begin(115200);
char AUTHKEY[SUPLA_AUTHKEY_SIZE] = {xxxx};
char GUID[SUPLA_GUID_SIZE] = {yyyyC};
char SERVER[] = "svr31.supla.org";
char EMAIL[] = "[email protected]";
pinMode(5, INPUT_PULLUP);
SuplaDevice.setName("D-LINK TEST");
WiFi.softAPdisconnect(true);
SuplaDevice.begin(GUID, SERVER, EMAIL, AUTHKEY);
while ((!(WiFi.status() == WL_CONNECTED))){
delay(500);
Serial.print(".");}
Serial.println("Połączony z WiFi");
}
void loop() {
SuplaDevice.iterate();
//-----------------------------------
if ( digitalRead(5) == HIGH){
a=0;
}
if ( digitalRead(5) == LOW && a==0) {
url = Link_1;
direct_Link() ;
a=1;
}
//-----------------------------------
}
void direct_Link() {
WiFiClientSecure client;
Serial.print(" connecting to ");
Serial.println(host);
if (!client.connect(host, httpsPort)) {
Serial.println("connection failed");
return;
}
Serial.print("requesting URL: ");
Serial.println(url);
client.print(String("GET ") + url + " HTTP/1.1\r\n" +
"Host: " + host + "\r\n" +
"User-Agent: BuildFailureDetectorESP8266\r\n" +
"Connection: close\r\n\r\n");
Serial.println("request sent");
while (client.connected()) {
String line = client.readStringUntil('\n');
if (line == "\r") {
Serial.println("headers received");
break;
}
}
String line = client.readStringUntil('}');
line = line + "}";
Serial.println("reply was:");
Serial.println("==========");
Serial.println(line);
Serial.println("==========");
Serial.println("closing connection");
}
Po "aktywowaniu" GPIO5 wypluwa, że "connection failed".
D-Link.JPG
You do not have the required permissions to view the files attached to this post.
: 
cz->b 
+ila
