Elmaya, can you do something about my problem?
Thank you
Automatyczny reset - da się?
-
elmaya
- Posts: 1485
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
Do you use the same SSID and Password on the router and amplifier?
I see two different IPs:
192.168.8.3 / 255.255.255.0 / 192.168.8.164
192.168.8.177 / 255.255.255.0 / 192.168.8.1
witch is the ip that corresponds to the amplifier?
Here it is connected and reset the counter to 0
Code: Select all
Connected
Adres IP:
192.168.8.177 / 255.255.255.0 / 192.168.8.1
(RSSI): -56 dBm
Pinging host www.google.com
Success!!
Pinging host www.google.com
Success!!-
Dawid84
- Posts: 154
- Joined: Mon Jan 14, 2019 12:45 pm
- Location: Piekary Śląskie
In the main router I have the SSID HUAWEI-B525-DOM, and in the HUAWEI-B525-DOM1 amplifier I have a module registered and connected to the HUAWEI-B5B5-DOM1 with the amplifier and it should be reset if there is no internet access from the main router. as I wrote earlier, if on the main router it blocks access of the amplifier to the Internet, there is no reset, but if I remove the amplifier from the socket, it will be reset after a certain time
Pozdrawiam
Dawid
Dawid
-
kwiatek67
- Posts: 37
- Joined: Mon Aug 12, 2019 8:16 pm
Koledzy który z tych softów będzie najlepszy do Yunshan ?
-
Gucio2607.
- Posts: 508
- Joined: Tue Aug 22, 2017 1:56 pm
A nie można by zrobić tego na sonnof'ie?. Taki przedłużacz który po prostu rozłącza zasilanie routera.
Zainstalowane:
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
-
kwiatek67
- Posts: 37
- Joined: Mon Aug 12, 2019 8:16 pm
Mój router zasilany jest z zewnętrznego zasilacza 12 V i to za jego pomocą będę zasilał Yunshana.Gucio2607. wrote: Sat Feb 29, 2020 9:40 am A nie można by zrobić tego na sonnof'ie?. Taki przedłużacz który po prostu rozłącza zasilanie routera.
-
Gucio2607.
- Posts: 508
- Joined: Tue Aug 22, 2017 1:56 pm
Podpowie ktoś z jakimi parametrami wgrać do yunshan? Wgrywamy tylko jeden plik? Po wgraniu świeci się tylko czerwona dioda
Zainstalowane:
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
-
Gucio2607.
- Posts: 508
- Joined: Tue Aug 22, 2017 1:56 pm
Nikt?
Zainstalowane:
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
11x sonoff basic, 1x sonoff gate, 1x Yunshan, 2x H801, 7x sonoff touch(1,2,3 gang), 1x sonoff 4ch PRO
