[Zgłoszenie] Moduły bramowe (DIY_george1255::1ch_gate_router_contact)

Moderator: vajera

User avatar
george1255
Posts: 426
Joined: Fri Sep 02, 2022 8:48 pm
Location: Włodawa
Has thanked: 12 times
Been thanked: 7 times

Post

Prosze o dopisanie do bazy

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "1ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_1,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 2,
  .z2s_device_endpoints_count_m1 = 1,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },
    { 2, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }
  }},
oraz

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 3,
  .z2s_device_endpoints_count_m1 = 2,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }  
  }},
Top
User avatar
vajera
Posts: 7290
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 289 times
Been thanked: 161 times

Post

george1255 wrote: Mon May 11, 2026 6:09 pm Prosze o dopisanie do bazy

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "1ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_1,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 2,
  .z2s_device_endpoints_count_m1 = 1,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },
    { 2, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }
  }},
oraz

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 3,
  .z2s_device_endpoints_count_m1 = 2,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }  
  }},
+BWNU:1.5.28-12/05/26
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
george1255
Posts: 426
Joined: Fri Sep 02, 2022 8:48 pm
Location: Włodawa
Has thanked: 12 times
Been thanked: 7 times

Post

vajera wrote: Tue May 12, 2026 9:14 am
george1255 wrote: Mon May 11, 2026 6:09 pm Prosze o dopisanie do bazy

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "1ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_1,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 2,
  .z2s_device_endpoints_count_m1 = 1,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },
    { 2, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }
  }},
oraz

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 3,
  .z2s_device_endpoints_count_m1 = 2,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }  
  }},
+BWNU:1.5.28-12/05/26
Damy rade wprowadzic poprawke przy najbliszej aktualizacji ?

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 3,
  .z2s_device_endpoints_count_m1 = 2,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }  
  }},
zmienic na

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 4,
  .z2s_device_endpoints_count_m1 = 3,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR },  
    { 4, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }   
  }},
jakiegos mindfuck'a zlapalem, zacmienie i zapomnialem ze jak sa dwa kanaly przekaznika to przydałoby sie zapodac 2 stany z kontraktona a nie 1 :P
Top
User avatar
vajera
Posts: 7290
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 289 times
Been thanked: 161 times

Post

george1255 wrote: Sun May 17, 2026 9:44 am jakiegos mindfuck'a zlapalem, zacmienie i zapomnialem ze jak sa dwa kanaly przekaznika to przydałoby sie zapodac 2 stany z kontraktona a nie 1 :P
+BWNU:1.5.42-20/05/26
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
george1255
Posts: 426
Joined: Fri Sep 02, 2022 8:48 pm
Location: Włodawa
Has thanked: 12 times
Been thanked: 7 times

Post

vajera wrote: Wed May 20, 2026 8:04 pm
george1255 wrote: Sun May 17, 2026 9:44 am jakiegos mindfuck'a zlapalem, zacmienie i zapomnialem ze jak sa dwa kanaly przekaznika to przydałoby sie zapodac 2 stany z kontraktona a nie 1 :P
+BWNU:1.5.42-20/05/26
z tego co widze w bazie jest wpis

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
    .z2s_device_uid = 35020, 
    .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
    .z2s_device_flags = Z2S_DEVICE_CONFIG_FLAG_MIRROR_2_ENDPOINTS,
    .z2s_device_endpoints_count = 4,
    .z2s_device_endpoints_count_m1 = 2,
    .z2s_device_endpoints = {
      { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },              
      { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }}},
a prosilem o dodanie

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 4,
  .z2s_device_endpoints_count_m1 = 3,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR },  
    { 4, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }   
  }},

Domyślam sie ze to Twoja zmiana Łukaszu, ale przy Twojej wersji wpisu, przy próbie dodania urządzenia 2 przekaźniki+2 kontraktony, do bramki dodaje sie 1 przekaźnik + 3 kontraktony.
Top
User avatar
vajera
Posts: 7290
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 289 times
Been thanked: 161 times

Post

george1255 wrote: Mon Jun 22, 2026 3:27 pm
vajera wrote: Wed May 20, 2026 8:04 pm
george1255 wrote: Sun May 17, 2026 9:44 am jakiegos mindfuck'a zlapalem, zacmienie i zapomnialem ze jak sa dwa kanaly przekaznika to przydałoby sie zapodac 2 stany z kontraktona a nie 1 :P
+BWNU:1.5.42-20/05/26
z tego co widze w bazie jest wpis

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
    .z2s_device_uid = 35020, 
    .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
    .z2s_device_flags = Z2S_DEVICE_CONFIG_FLAG_MIRROR_2_ENDPOINTS,
    .z2s_device_endpoints_count = 4,
    .z2s_device_endpoints_count_m1 = 2,
    .z2s_device_endpoints = {
      { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },              
      { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }}},
a prosilem o dodanie

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 4,
  .z2s_device_endpoints_count_m1 = 3,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR },  
    { 4, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }   
  }},

Domyślam sie ze to Twoja zmiana Łukaszu, ale przy Twojej wersji wpisu, przy próbie dodania urządzenia 2 przekaźniki+2 kontraktony, do bramki dodaje sie 1 przekaźnik + 3 kontraktony.
Musiałem zmienić Twój wpis, bo w taki sposób można dodać maksymalnie 3 endpointy, ale faktycznie tutaj powinno być:

Code: Select all

.z2s_device_endpoints_count_m1 = 3
Poprawię to jeszcze dzisiaj.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
george1255
Posts: 426
Joined: Fri Sep 02, 2022 8:48 pm
Location: Włodawa
Has thanked: 12 times
Been thanked: 7 times

Post

vajera wrote: Mon Jun 22, 2026 3:34 pm
george1255 wrote: Mon Jun 22, 2026 3:27 pm
vajera wrote: Wed May 20, 2026 8:04 pm
+BWNU:1.5.42-20/05/26
z tego co widze w bazie jest wpis

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
    .z2s_device_uid = 35020, 
    .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
    .z2s_device_flags = Z2S_DEVICE_CONFIG_FLAG_MIRROR_2_ENDPOINTS,
    .z2s_device_endpoints_count = 4,
    .z2s_device_endpoints_count_m1 = 2,
    .z2s_device_endpoints = {
      { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },              
      { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }}},
a prosilem o dodanie

Code: Select all

{ .manufacturer_name = "DIY_george1255", .model_name = "2ch_gate_router_contact",
  .z2s_device_uid = 000000, // dowolny wolny 
  .z2s_device_desc_id = Z2S_DEVICE_DESC_RELAY_2,
  .z2s_device_flags = 0,
  .z2s_device_endpoints_count = 4,
  .z2s_device_endpoints_count_m1 = 3,
  .z2s_device_endpoints = {
    { 1, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 2, 0, 0, Z2S_DEVICE_DESC_RELAY_1 },          
    { 3, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR },  
    { 4, 0, 0, Z2S_DEVICE_DESC_DIY_MAIL_SENSOR }   
  }},

Domyślam sie ze to Twoja zmiana Łukaszu, ale przy Twojej wersji wpisu, przy próbie dodania urządzenia 2 przekaźniki+2 kontraktony, do bramki dodaje sie 1 przekaźnik + 3 kontraktony.
Musiałem zmienić Twój wpis, bo w taki sposób można dodać maksymalnie 3 endpointy, ale faktycznie tutaj powinno być:

Code: Select all

.z2s_device_endpoints_count_m1 = 3
Poprawię to jeszcze dzisiaj.
Kojarzę ze espressiv wymusza mirroring powyżej 3 endpointow, bo sie wiesza chyba urządzenie albo bramka
Top
User avatar
vajera
Posts: 7290
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 289 times
Been thanked: 161 times

Post

george1255 wrote: Mon Jun 22, 2026 3:36 pm
vajera wrote: Mon Jun 22, 2026 3:34 pm [Musiałem zmienić Twój wpis, bo w taki sposób można dodać maksymalnie 3 endpointy, ale faktycznie tutaj powinno być:

Code: Select all

.z2s_device_endpoints_count_m1 = 3
Poprawię to jeszcze dzisiaj.
Kojarzę ze espressiv wymusza mirroring powyżej 3 endpointow, bo sie wiesza chyba urządzenie albo bramka
To ograniczenie sam wprowadziłem do bramki, z uwagi na ilość pamięci FLASH, jaką zabiera tabela urządzeń.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
andras
Posts: 636
Joined: Fri Dec 30, 2016 5:51 pm
Has thanked: 2 times
Been thanked: 4 times

Post

Łukasz mam od george1255
DIY_george1255", .model_name = "2ch_gate_router_contact
i dodają mi się 3 przekaźniki czy dasz radę to poprawić ? a powinny być 2 przekaźniki i 2 sensory .


Firefox_Screenshot_2026-07-06T08-29-15.293Z.png
You do not have the required permissions to view the files attached to this post.
Top
User avatar
vajera
Posts: 7290
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 289 times
Been thanked: 161 times

Post

andras wrote: Mon Jul 06, 2026 9:03 am Łukasz mam od george1255
DIY_george1255", .model_name = "2ch_gate_router_contact
i dodają mi się 3 przekaźniki czy dasz radę to poprawić ? a powinny być 2 przekaźniki i 2 sensory .



Firefox_Screenshot_2026-07-06T08-29-15.293Z.png
Wydaje mi się, że to poprawiałem? Którą wersję oprogramowania masz wgraną do bramki?
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top

Return to “Bramka ZigBee”