MEW-01 brak kosztu w bieżącym miesiącu

[piterw]

Cześć,
Wie ktoś czemu dla licznika 3 fazowego jedynie aplikacja Supli prezentuje koszt w bieżącym miesiącu? Taka informacja powinna spływać również przez MQTT.

[Robert Błaszczak]

Koszt jest przeliczany w Cloud na podstawie podanej ceny za jednostkę energii. MEW nie zna ceny jednostkowej, więc nie może podawać kosztów.

[Duch__]

Jaki problem zużycie w bieżącym miesiącu przemnożyć przez cenę 1kWh? Pytanie oczywiście do autora postu.

[piterw]

A gdzie jest zuzycie w danym miesiącu jak podaje total od uruchomienia? Przemnożyć.. trzeba mieć co.

Od razu wklejam co zrzuca mqtt z cloud'a. Przecież nawet koszt w PLN jest zwracany tylko dla zużycia total.

Code: Select all

[b]sensor.electricity_meter_current_phase_1[/b]
1 (Current - Phase 1)
0.218	state_class: measurement
unit_of_measurement: A
friendly_name: 1 (Current - Phase 1)
device_class: current
[b]sensor.electricity_meter_current_phase_2[/b]
1 (Current - Phase 2)
1.877	state_class: measurement
unit_of_measurement: A
friendly_name: 1 (Current - Phase 2)
device_class: current
[b]sensor.electricity_meter_current_phase_3[/b]
1 (Current - Phase 3)
1.306	state_class: measurement
unit_of_measurement: A
friendly_name: 1 (Current - Phase 3)
device_class: current
[b]sensor.electricity_meter_frequency_phase_1[/b]
1 (Frequency - Phase 1)
49.98	state_class: measurement
unit_of_measurement: Hz
friendly_name: 1 (Frequency - Phase 1)
[b]sensor.electricity_meter_frequency_phase_2[/b]
1 (Frequency - Phase 2)
49.98	state_class: measurement
unit_of_measurement: Hz
friendly_name: 1 (Frequency - Phase 2)
[b]sensor.electricity_meter_frequency_phase_3[/b]
1 (Frequency - Phase 3)
49.98	state_class: measurement
unit_of_measurement: Hz
friendly_name: 1 (Frequency - Phase 3)
[b]sensor.electricity_meter_phase_angle_phase_1[/b]
1 (Phase angle - Phase 1)
-51.9	state_class: measurement
unit_of_measurement: °
friendly_name: 1 (Phase angle - Phase 1)
[b]sensor.electricity_meter_phase_angle_phase_2[/b]
1 (Phase angle - Phase 2)
-31.7	state_class: measurement
unit_of_measurement: °
friendly_name: 1 (Phase angle - Phase 2)
[b]sensor.electricity_meter_phase_angle_phase_3[/b]
1 (Phase angle - Phase 3)
-8.3	state_class: measurement
unit_of_measurement: °
friendly_name: 1 (Phase angle - Phase 3)
[b]sensor.electricity_meter_power_active_phase_1[/b]
1 (Power active - Phase 1)
19.60092	state_class: measurement
unit_of_measurement: W
friendly_name: 1 (Power active - Phase 1)
device_class: power
[b]sensor.electricity_meter_power_active_phase_2[/b]
1 (Power active - Phase 2)
358.95244	state_class: measurement
unit_of_measurement: W
friendly_name: 1 (Power active - Phase 2)
device_class: power
[b]sensor.electricity_meter_power_active_phase_3[/b]
1 (Power active - Phase 3)
266.79344	state_class: measurement
unit_of_measurement: W
friendly_name: 1 (Power active - Phase 3)
device_class: power
[b]sensor.electricity_meter_power_apparent_phase_1[/b]
1 (Power apparent - Phase 1)
50.95376	state_class: measurement
unit_of_measurement: VA
friendly_name: 1 (Power apparent - Phase 1)
[b]sensor.electricity_meter_power_apparent_phase_2[/b]
1 (Power apparent - Phase 2)
436.24642	state_class: measurement
unit_of_measurement: VA
friendly_name: 1 (Power apparent - Phase 2)
[b]sensor.electricity_meter_power_apparent_phase_3[/b]
1 (Power apparent - Phase 3)
304.39794	state_class: measurement
unit_of_measurement: VA
friendly_name: 1 (Power apparent - Phase 3)
[b]sensor.electricity_meter_power_factor_phase_1[/b]
1 (Power factor - Phase 1)
42.1	state_class: measurement
unit_of_measurement: %
friendly_name: 1 (Power factor - Phase 1)
device_class: power_factor
[b]sensor.electricity_meter_power_factor_phase_2[/b]
1 (Power factor - Phase 2)
82.5	state_class: measurement
unit_of_measurement: %
friendly_name: 1 (Power factor - Phase 2)
device_class: power_factor
[b]sensor.electricity_meter_power_factor_phase_3[/b]
1 (Power factor - Phase 3)
87.9	state_class: measurement
unit_of_measurement: %
friendly_name: 1 (Power factor - Phase 3)
device_class: power_factor
[b]sensor.electricity_meter_power_reactive_phase_1[/b]
1 (Power reactive - Phase 1)
-33.35532	state_class: measurement
unit_of_measurement: var
friendly_name: 1 (Power reactive - Phase 1)
[b]sensor.electricity_meter_power_reactive_phase_2[/b]
1 (Power reactive - Phase 2)
-226.73186	state_class: measurement
unit_of_measurement: var
friendly_name: 1 (Power reactive - Phase 2)
[b]sensor.electricity_meter_power_reactive_phase_3[/b]
1 (Power reactive - Phase 3)
-38.8421	state_class: measurement
unit_of_measurement: var
friendly_name: 1 (Power reactive - Phase 3)
[b]sensor.electricity_meter_total_cost[/b]
1 (Total cost)
451.41	state_class: measurement
unit_of_measurement: PLN
friendly_name: 1 (Total cost)
device_class: monetary
[b]sensor.electricity_meter_total_cost_balanced[/b]
1 (Total cost - balanced)
451.41	state_class: measurement
unit_of_measurement: PLN
friendly_name: 1 (Total cost - balanced)
device_class: monetary
[b]sensor.electricity_meter_total_forward_active_energy[/b]
1 (Total forward active energy)
716.53	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total forward active energy)
device_class: energy
[b]sensor.electricity_meter_total_forward_active_energy_balanced[/b]
1 (Total forward active energy - balanced)
716.53	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total forward active energy - balanced)
device_class: energy
[b]sensor.electricity_meter_total_forward_active_energy_balanced_cost[/b]
sensor Cost
unknown	state_class: total_increasing
unit_of_measurement: EUR
friendly_name: sensor Cost
device_class: monetary
[b]sensor.electricity_meter_total_forward_active_energy_phase_1[/b]
1 (Total forward active energy - Phase 1)
147.26114	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total forward active energy - Phase 1)
device_class: energy
[b]sensor.electricity_meter_total_forward_active_energy_phase_2[/b]
1 (Total forward active energy - Phase 2)
320.94252	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total forward active energy - Phase 2)
device_class: energy
[b]sensor.electricity_meter_total_forward_active_energy_phase_3[/b]
1 (Total forward active energy - Phase 3)
248.32634	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total forward active energy - Phase 3)
device_class: energy
[b]sensor.electricity_meter_total_forward_reactive_energy_phase_1[/b]
1 (Total forward reactive energy - Phase 1)
46.54204	state_class: measurement
unit_of_measurement: kvarh
friendly_name: 1 (Total forward reactive energy - Phase 1)
[b]sensor.electricity_meter_total_forward_reactive_energy_phase_2[/b]
1 (Total forward reactive energy - Phase 2)
28.83474	state_class: measurement
unit_of_measurement: kvarh
friendly_name: 1 (Total forward reactive energy - Phase 2)
[b]sensor.electricity_meter_total_forward_reactive_energy_phase_3[/b]
1 (Total forward reactive energy - Phase 3)
41.69872	state_class: measurement
unit_of_measurement: kvarh
friendly_name: 1 (Total forward reactive energy - Phase 3)
[b]sensor.electricity_meter_total_reverse_active_energy[/b]
1 (Total reverse active energy)
0.09614	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total reverse active energy)
device_class: energy
[b]sensor.electricity_meter_total_reverse_active_energy_balanced[/b]
1 (Total reverse active energy - balanced)
0.09614	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total reverse active energy - balanced)
device_class: energy
[b]sensor.electricity_meter_total_reverse_active_energy_phase_1[/b]
1 (Total reverse active energy - Phase 1)
0.04462	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total reverse active energy - Phase 1)
device_class: energy
[b]sensor.electricity_meter_total_reverse_active_energy_phase_2[/b]
1 (Total reverse active energy - Phase 2)
0.02584	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total reverse active energy - Phase 2)
device_class: energy
[b]sensor.electricity_meter_total_reverse_active_energy_phase_3[/b]
1 (Total reverse active energy - Phase 3)
0.02568	state_class: measurement
last_reset: 1970-01-01T00:00:00+00:00
unit_of_measurement: kWh
friendly_name: 1 (Total reverse active energy - Phase 3)
device_class: energy
[b]sensor.electricity_meter_total_reverse_reactive_energy_phase_1[/b]
1 (Total reverse reactive energy - Phase 1)
33.50358	state_class: measurement
unit_of_measurement: kvarh
friendly_name: 1 (Total reverse reactive energy - Phase 1)
[b]sensor.electricity_meter_total_reverse_reactive_energy_phase_2[/b]
1 (Total reverse reactive energy - Phase 2)
146.65444	state_class: measurement
unit_of_measurement: kvarh
friendly_name: 1 (Total reverse reactive energy - Phase 2)
[b]sensor.electricity_meter_total_reverse_reactive_energy_phase_3[/b]
1 (Total reverse reactive energy - Phase 3)
22.07174	state_class: measurement
unit_of_measurement: kvarh
friendly_name: 1 (Total reverse reactive energy - Phase 3)
[b]sensor.electricity_meter_voltage_phase_1[/b]
1 (Voltage - Phase 1)
237.73	state_class: measurement
unit_of_measurement: V
friendly_name: 1 (Voltage - Phase 1)
device_class: voltage
[b]sensor.electricity_meter_voltage_phase_2[/b]
1 (Voltage - Phase 2)
236.97	state_class: measurement
unit_of_measurement: V
friendly_name: 1 (Voltage - Phase 2)
device_class: voltage
[b]sensor.electricity_meter_voltage_phase_3[/b]
1 (Voltage - Phase 3)
237.65	state_class: measurement
unit_of_measurement: V
friendly_name: 1 (Voltage - Phase 3)
device_class: voltage

P.

[pzygmunt]

Do MQTT takie informacje nie są wysyłanie. Klient oblicza wartość na podstawie zgromadzonej historii.
Również Suplowe aplikacje takich informacji nie dostają. Liczą koszt na bieżąco na podstawie zgromadzonej historii.

[piterw]

Rozumiem. To po grzyba, przepraszam, wysyłać wyliczenie w PLN dla total wg zadanej stawki w cloud, komuś to się do czegoś przyda? Potrzebne jest miesięczne, czyli reset zużycia w w cyklu zużytych kWh by się nadał, bo inaczej trzeba się trochę nakombinować.

[pzygmunt]

Myślę, że przynajmniej jedna osoba się znajdzie dla której ta informacja jest przydatna.
Nie wiem z czym integrujesz ale wiele rozwiązań radzi sobie z tymi danymi również przy wyliczaniu kosztów.

[piterw]

HA. Domyślnie energy wprowadzone ostatnio widzę średnio sobie radzi z tymi obliczeniami. Generalnie dla jasności, pokazuje ale nie wiem czego to jest suma, muszę się przyjrzeć bo się ni cholery nie zgadza

[pzygmunt]

Nie zgadza się dlatego, że tam jest godzinne przesunięcie czasowe.
Osobiście sugerowałbym nie kombinować/nie wyważać otwartych drzwi i pozostać przy tym co HA oferuje w standardzie.