Wsparcie dla Termostatu

krycha88 · Post Tue Oct 31, 2023 11:48 am

Wrzuciłem aktualizację.

@klew a czy byś mógł się wypowiedzieć na temat:
viewtopic.php?p=164474#p164474

Przy ostatnich aktualizacjach też to zauważyłem, że po pierwszym zarejestrowaniu urządzenia w cloud nie podpowiadają się domyślne temperatury w programie oraz cały harmonogram.

Dodatkowo zauważyłem, że w cloud wyświetla się pusta wartość dla histerezy dopiero muszę zapisać ją w cloud aby poprawnie się wyświetlała.

to są jakieś znane problemy?

klew · Post Tue Oct 31, 2023 12:50 pm

krycha88 wrote: Tue Oct 31, 2023 11:48 am Wrzuciłem aktualizację.

@klew a czy byś mógł się wypowiedzieć na temat:
viewtopic.php?p=164474#p164474

Przy ostatnich aktualizacjach też to zauważyłem, że po pierwszym zarejestrowaniu urządzenia w cloud nie podpowiadają się domyślne temperatury w programie oraz cały harmonogram.

Dodatkowo zauważyłem, że w cloud wyświetla się pusta wartość dla histerezy dopiero muszę zapisać ją w cloud aby poprawnie się wyświetlała.

to są jakieś znane problemy?

Wyślij proszę jakiś log pokazujący pierwszy start urządzenia z rejestracją w cloud

krycha88 · Post Tue Oct 31, 2023 1:18 pm

klew wrote: Tue Oct 31, 2023 12:50 pm Wyślij proszę jakiś log pokazujący pierwszy start urządzenia z rejestracją w cloud

Code: Select all

Button[0]::setMulticlickTime: 450
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 1D 0 8A AB 8A AB ]
Section type: 3; size: 29
CRC1 43914, CRC2 43914, CRC calc 43914
Channel function missing. Using SW defaults
HVAC: thermometer channel 0 has invalid type 6100
HVAC config missing. Using SW defaults
HVAC weekly schedule missing. Using SW defaults
HVAC alt weekly schedule missing. Using SW defaults
HVAC config changed offline flag 0
HVAC weekly schedule config changed offline flag 0
RemoteDeviceConfig: Registering field 0x00000010
Clock: automaticTimeSync: 1
Button[0] enabling IN as config button
Channel[1] temperature correction 0.000000
Channel[1] humidity correction 0.000000
Channel[1] config changed offline flag 0
Channel[2] temperature correction 0.000000
Channel[2] humidity correction 0.000000
Channel[2] config changed offline flag 0
Channel[3] temperature correction 0.000000
Channel[3] humidity correction 0.000000
Channel[3] config changed offline flag 0
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
readStorage: 8; Read: [0 1 34 8 0 0 1 1 ]
readStorage: 8; Read: [0 0 0 0 0 0 0 0 ]
readStorage: 8; Read: [1 0 0 0 0 0 0 0 ]
readStorage: 2; Read: [0 80 ]
readStorage: 2; Read: [0 80 ]
readStorage: 1; Read: [0 ]
Pin 0, pullUp 1, invertLogic 1, state 1
Found model Si7021Channel(1) value changed to temp(30.510130), humi(50.690216)
Channel(2) value changed to 23.10
Channel(3) value changed to 26.20
addClock: DEPRECATED
GUID: 95F175CC5AC92EC3D1F849F1B5E0AB33
Device name: GUI Generic
Device software version: GG v7.5.29
Initializing network layer
Network AP/hostname: GUI-GENERIC-CC50E31C35BE
Using Supla protocol version 21
Current status: [5] SuplaDevice initialized
Enter normal mode
WiFi: establishing connection with SSID: "Gargulec"
Connected BSSID: C8:7F:54:20:EC:D8
local IP: 192.168.1.15
subnetMask: 255.255.255.0
gatewayIP: 192.168.1.1
Signal strength (RSSI): -75 dBm
Establishing NOT encrypted connection with: beta-cloud.supla.org (port: 2015)
Connected to Supla Server
Initializing SRPC
LAST STATE ADDED: Register in progress
Current status: [10] Register in progress
CH #0, type: 6100, FuncList: 0x20000, default: 420, flags: 0x18010000, value: [00 01 34 08 00 00 01 01]
CH #1, type: 3038, FuncList: 0x0, default: 45, flags: 0x8010000, value: [2e 77 00 00 02 c6 00 00]
CH #2, type: 3034, FuncList: 0x0, default: 40, flags: 0x8010000, value: [9a 99 99 99 99 19 37 40]
CH #3, type: 3034, FuncList: 0x0, default: 40, flags: 0x8010000, value: [33 33 33 33 33 33 3a 40]
Send: [53 55 50 4C 41 15 01 00 00 00 45 00 00 00 AC 02 00 00 6B 72 79 73 74 69 61 6E 2E 66 72 61 6E 69 65 63 7A 65 6B 40 67 6D 61 69 6C 2E 63 6F 6D 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FB C9 5C 79 80 78 5D CA F6 1B 0F 35 2F B9 60 CA 95 F1 75 CC 5A C9 2E C3 D1 F8 49 F1 B5 E0 AB 33 47 55 49 20 47 65 6E 65 72 69 63 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 15 01 53 55 50 4C 41 ]
Device registered (activity timeout 120 s, server version: 21, server min version: 1)
LAST STATE ADDED: Registered and ready
Current status: [17] Registered and ready
Changing activity timeout to 30
Send: [53 55 50 4C 41 15 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
Send: [53 55 50 4C 41 ]
HVAC onRegistered
HVAC send: IsOn 0, Mode OFF, tHeat 2100, tCool 0, flags 0x101
Send: [53 55 50 4C 41 15 03 00 00 00 67 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 01 34 08 00 00 01 01 ]
Send: [53 55 50 4C 41 ]
HVAC send: IsOn 0, Mode OFF, tHeat 2100, tCool 0, flags 0x101
Recv: [53 55 50 4C 41 15 02 00 00 00 AB 02 00 00 01 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 03 00 00 00 AB 02 00 00 01 00 00 00 01 53 55 50 4C 41 53 55 
50 4C 41 15 04 00 00 00 AB 02 00 00 01 00 00 00 02 53 55 50 4C 41 53 55 50 4C 41 15 05 00 00 00 AB 02 00 00 01 00 00 00 03 53 55 50 4C 41 53 55 50 4C 41 15 06 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 ]
Received ChannelConfigFinished for channel 0
Send: [53 55 50 4C 41 15 04 00 00 00 E0 01 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 07 00 00 00 EA 01 00 00 1A 00 00 00 E7 07 0A 1F 03 0E 0F 2C 0E 00 00 00 45 75 72 6F 70 65 2F 57 61 72 73 61 77 00 53 55 50 4C 41 ]
Received ChannelConfigFinished for channel 1
Send: [53 55 50 4C 41 15 05 00 00 00 67 00 00 00 0E 00 00 00 01 00 00 00 00 00 2E 77 00 00 02 C6 00 00 ]
Send: [53 55 50 4C 41 ]
Received ChannelConfigFinished for channel 2
Send: [53 55 50 4C 41 15 06 00 00 00 67 00 00 00 0E 00 00 00 02 00 00 00 00 00 9A 99 99 99 99 19 37 40 ]
Send: [53 55 50 4C 41 ]
Received ChannelConfigFinished for channel 3
Send: [53 55 50 4C 41 15 07 00 00 00 A9 02 00 00 28 00 00 00 03 28 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Sending channel config for 3
Send: [53 55 50 4C 41 15 08 00 00 00 E0 01 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 08 00 00 00 B3 02 00 00 03 00 00 00 01 00 03 53 55 50 4C 41 ]
Activity timeout set to 30 s
Current local time: 1970-1-1 0:0:5
Clock: time diff (system-new): -1698761739 s
Clock: new local time: 2023-10-31 14:15:44
HVAC[0]: updating timer value: remainingTime=0 s
SRPC sedning: remaining time 0 s, channel 0
Send: [53 55 50 4C 41 15 09 00 00 00 69 00 00 00 E3 00 00 00 00 33 DD 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Send: [53 55 50 4C 41 15 0A 00 00 00 A9 02 00 00 87 00 00 00 00 A4 01 00 00 00 7F 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 01 00 00 00 00 00 00 01 
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 F4 01 A0 0F F4 01 4C 1D 14 00 A0 0F C8 00 E8 03 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
HVAC[0]: default channel config send
Send: [53 55 50 4C 41 15 0B 00 00 00 A9 02 00 00 6C 01 00 00 00 A4 01 00 00 02 64 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
HVAC[0]: weekly schedule send
Send: [53 55 50 4C 41 15 0C 00 00 00 A9 02 00 00 6C 01 00 00 00 A4 01 00 00 03 64 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
HVAC[0]: alt weekly schedule send
Send: [53 55 50 4C 41 15 0D 00 00 00 A9 02 00 00 28 00 00 00 01 2D 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Sending channel config for 1
Send: [53 55 50 4C 41 15 0E 00 00 00 A9 02 00 00 28 00 00 00 02 28 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Sending channel config for 2
Send: [53 55 50 4C 41 15 0F 00 00 00 67 00 00 00 0E 00 00 00 03 00 00 00 00 00 33 33 33 33 33 33 3A 40 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 15 09 00 00 00 AA 02 00 00 28 00 00 00 03 28 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 0A 00 00 00 EA 01 00 00 1A 00 00 00 E7 07 0A 1F 03 0E 0F 2C 0E 00 00 00 45 75 72 6F 70 65 2F 57 61 72 73 61 77 00 53 55 50 4C 41 53 55 50 4C 41 15 0B 00 00 00 B3 02 00 00 03 00 00 00 01 00 00 53 55 50 4C 41 53 55 50 4C 41 15 0C 00 00 00 AA 02 00 00 87 00 00 00 00 A4 01 00 00 00 7F 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 01 00 00 00 00 00 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
set channel config succeeded (1)
Recv: [00 00 00 00 00 00 00 F4 01 A0 0F F4 01 4C 1D 14 00 A0 0F C8 00 E8 03 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 0D 00 00 00 
B3 02 00 00 03 00 00 00 01 02 00 53 55 50 4C 41 53 55 50 4C 41 15 0E 00 00 00 AA 02 00 00 6C 01 00 00 00 A4 01 00 00 02 64 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Received SetChannelConfig for channel 3, function 40, config type 0, config size 32
handleChannelConfig, func 40, configtype 0, configsize 32
Channel[3] temperature correction 0.000000
Channel[3] humidity correction 0.000000
Channel[3] config changed offline flag 0
Sending channel config result OK (1)
Send: [53 55 50 4C 41 15 10 00 00 00 B4 02 00 00 03 00 00 00 01 00 03 ]
Send: [53 55 50 4C 41 ]
Send: [53 55 50 4C 41 15 11 00 00 00 67 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 01 34 08 00 00 01 00 ]
Send: [53 55 50 4C 41 ]
HVAC send: IsOn 0, Mode OFF, tHeat 2100, tCool 0, flags 0x1
Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 0F 00 00 00 
B3 02 00 00 03 00 00 00 01 03 00 53 55 50 4C 41 53 55 50 4C 41 15 10 00 00 00 AA 02 00 00 6C 01 00 00 00 A4 01 00 00 03 64 01 00 00 00 00 00 00 00 ]
Current local time: 2023-10-31 14:15:45
Clock: time diff (system-new): 1 s
Clock: new local time: 2023-10-31 14:15:44
Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
HVAC set channel config succeeded (1)
Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 11 00 00 00 B3 02 00 00 03 00 00 00 01 00 01 53 55 50 4C 41 53 55 50 4C 41 15 12 00 00 00 AA 02 00 00 28 00 00 00 01 2D 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 13 00 00 00 B3 02 00 00 03 00 00 00 01 00 
02 53 55 50 4C 41 53 55 50 4C 41 15 14 00 00 00 AA 02 00 00 28 00 00 00 02 28 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 ]
Received SetChannelConfig for channel 0, function 420, config type 0, config size 127
HVAC: processing channel config
Current config:
HVAC[0]:
  Main: 1
  Aux: 0
  Aux type: 0
  AntiFreezeAndOverheatProtectionEnabled: 0
  Sensor: 0
  Algorithms: 3
  UsedAlgorithm: 1
  MinOnTimeS: 0
  MinOffTimeS: 0
  OutputValueOnError: 0
  Subfunction: HEAT (1)
  Setpoint change in weekly schedule: switches to manual
  AuxMinMaxSetpointEnabled: 0
  Temperatures:
    10: 500
    11: 4000
    12: 500
    13: 7500
    14: 20
    15: 4000
    16: 200
    17: 1000
New config:
HVAC[0]:
  Main: 1
  Aux: 0
  Aux type: 0
  AntiFreezeAndOverheatProtectionEnabled: 0
  Sensor: 0
  Algorithms: 3
  UsedAlgorithm: 1
  MinOnTimeS: 0
  MinOffTimeS: 0
  OutputValueOnError: 0
  Subfunction: HEAT (1)
  Setpoint change in weekly schedule: switches to manual
  AuxMinMaxSetpointEnabled: 0
  Temperatures:
    10: 500
    11: 4000
    12: 500
    13: 7500
    14: 20
    15: 4000
    16: 200
    17: 1000
Sending channel config result OK (1)
Send: [53 55 50 4C 41 15 12 00 00 00 B4 02 00 00 03 00 00 00 01 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
HVAC set weekly schedule config succeeded (1)
Received SetChannelConfig for channel 0, function 420, config type 2, config size 356
Handling weekly schedule for channel 0
Program[0], mode 0, tHeat 0, tCool 0
Program[1], mode 0, tHeat 0, tCool 0
Program[2], mode 0, tHeat 0, tCool 0
Program[3], mode 0, tHeat 0, tCool 0
HVAC weekly schedule saved successfully
HVAC alt weekly schedule saved successfully
Sending channel config result OK (1)
Send: [53 55 50 4C 41 15 13 00 00 00 B4 02 00 00 03 00 00 00 01 00 00 ]
Send: [53 55 50 4C 41 ]
HVAC set alt weekly schedule config succeeded (1)
Received SetChannelConfig for channel 0, function 420, config type 3, config size 356
Handling weekly schedule for channel 0
Program[0], mode 0, tHeat 0, tCool 0
Program[1], mode 0, tHeat 0, tCool 0
Program[2], mode 0, tHeat 0, tCool 0
Program[3], mode 0, tHeat 0, tCool 0
Sending channel config result OK (1)
Send: [53 55 50 4C 41 15 14 00 00 00 B4 02 00 00 03 00 00 00 01 00 00 ]
Send: [53 55 50 4C 41 ]
set channel config succeeded (1)
Received SetChannelConfig for channel 1, function 45, config type 0, config size 32
handleChannelConfig, func 45, configtype 0, configsize 32
Channel[1] temperature correction 0.000000
Channel[1] humidity correction 0.000000
Channel[1] config changed offline flag 0
Sending channel config result OK (1)
Send: [53 55 50 4C 41 15 15 00 00 00 B4 02 00 00 03 00 00 00 01 00 01 ]
Send: [53 55 50 4C 41 ]
set channel config succeeded (1)
Received SetChannelConfig for channel 2, function 40, config type 0, config size 32
handleChannelConfig, func 40, configtype 0, configsize 32
Channel[2] temperature correction 0.000000
Channel[2] humidity correction 0.000000
Channel[2] config changed offline flag 0
Sending channel config result OK (1)
Send: [53 55 50 4C 41 15 16 00 00 00 B4 02 00 00 03 00 00 00 01 00 02 ]
Send: [53 55 50 4C 41 ]
Channel(1) value changed to temp(30.585203), humi(50.514740)
Send: [53 55 50 4C 41 15 17 00 00 00 67 00 00 00 0E 00 00 00 01 00 00 00 00 00 79 77 00 00 52 C5 00 00 ]
Send: [53 55 50 4C 41 ]
Wrote 8 bytes to storage at 15
Wrote 7 bytes to storage at 8
Commit
Channel(1) value changed to temp(30.671003), humi(50.339264)
Send: [53 55 50 4C 41 15 18 00 00 00 67 00 00 00 0E 00 00 00 01 00 00 00 00 00 CF 77 00 00 A3 C4 00 00 ]
Send: [53 55 50 4C 41 ]

a tak wygląda to w cloud

termo.JPG

klew · Post Tue Oct 31, 2023 1:37 pm

krycha88 wrote: Tue Oct 31, 2023 1:18 pm

Logi są "dziwne". Więc zerknąłem w kod. I tam masz klasę:

Code: Select all

class ThermostatGUI : public Supla::Control::HvacBase, public Supla::Protocol::ProtocolLayer {

w której nadpisujesz metody:

Code: Select all

  virtual void onInit() override{};
  virtual bool onLoadConfig() override {
    return true;
  }

Rozumiem, że to było pod kątem ProtocolLayer, ale ten onInit jest ma taką samą sygnaturę funkcji jak onInit z HvacBase. Przez co najprawdopodobniej nie odpala Ci się metoda onInit, która by te rzeczy inicjalizowała.

Ja bym tutaj całkowicie zrezygnował z dziedziczenia po HvacBase i zastąpił to po prostu kompozycją (czyli HvacBase jako member klasy ThermostatGUI).

lukasz06 · Post Tue Oct 31, 2023 1:50 pm

Wrzuciłem wersje 29 ale nic to nie zmienia, samoczynna zmiana ekranu, aż można oczopląsu dostać.

klew · Post Tue Oct 31, 2023 1:55 pm

lukasz06 wrote: Tue Oct 31, 2023 1:50 pm Wrzuciłem wersje 29 ale nic to nie zmienia, samoczynna zmiana ekranu, aż można oczopląsu dostać.

Z logami zawsze jest łatwiej zgadnąć co się dzieje ;P

krycha88 · Post Tue Oct 31, 2023 2:07 pm

lukasz06 wrote: Tue Oct 31, 2023 1:50 pm Wrzuciłem wersje 29 ale nic to nie zmienia, samoczynna zmiana ekranu, aż można oczopląsu dostać.

Bo pewnie ustawiasz czas odświeżania ekranu na 1s

lukasz06 · Post Tue Oct 31, 2023 2:10 pm

klew wrote: Tue Oct 31, 2023 1:55 pm
lukasz06 wrote: Tue Oct 31, 2023 1:50 pm Wrzuciłem wersje 29 ale nic to nie zmienia, samoczynna zmiana ekranu, aż można oczopląsu dostać.
Z logami zawsze jest łatwiej zgadnąć co się dzieje ;P

Logi:

Code: Select all

15:05:26.303 -> Relay[7] toggle (duration 0 ms)
15:05:26.335 -> Relay[7] turn OFF (duration 0 ms)
15:05:26.335 ->  **** Digital write[7], gpio: 25; value 0
15:05:26.335 -> Channel(7) value changed to 0
15:05:26.335 -> Establishing NOT encrypted connection with: beta-cloud.supla.org (port: 2015)
15:05:26.403 -> Connected to Supla Server
15:05:26.403 -> Initializing SRPC
15:05:26.403 -> LAST STATE ADDED: Register in progress
15:05:26.403 -> Current status: [10] Register in progress
15:05:26.403 -> CH #0, type: 6100, FuncList: 0x120000, default: 426, flags: 0x18010000, value: [00 02 e8 03 00 00 81 01]
15:05:26.437 -> CH #1, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [01 00 08 00 00 00 00 00]
15:05:26.437 -> CH #2, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [01 00 0c 00 00 00 00 00]
15:05:26.471 -> CH #3, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [01 00 0c 00 00 00 00 00]
15:05:26.471 -> CH #4, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [01 00 08 00 00 00 00 00]
15:05:26.471 -> CH #5, type: 2900, FuncList: 0xEF, default: 130, flags: 0x1010000, value: [01 00 00 00 00 00 00 00]
15:05:26.505 -> CH #6, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [06 00 08 00 00 00 00 00]
15:05:26.505 -> CH #7, type: 2900, FuncList: 0xEF, default: 130, flags: 0x1010000, value: [00 00 00 00 00 00 00 00]
15:05:26.539 -> CH #8, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [08 00 08 00 00 00 00 00]
15:05:26.539 -> CH #9, type: 6100, FuncList: 0x20000, default: 425, flags: 0x18010000, value: [00 01 34 08 00 00 81 01]
15:05:26.539 -> CH #10, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [0a 00 08 00 00 00 00 00]
15:05:26.574 -> CH #11, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [0a 00 0c 00 00 00 00 00]
15:05:26.574 -> CH #12, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [0a 00 0c 00 00 00 00 00]
15:05:26.608 -> CH #13, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [0a 00 08 00 00 00 00 00]
15:05:26.608 -> CH #14, type: 2900, FuncList: 0xEF, default: 130, flags: 0x1010000, value: [00 00 00 00 00 00 00 00]
15:05:26.608 -> CH #15, type: 3034, FuncList: 0x0, default: 40, flags: 0x8010000, value: [00 00 00 00 00 30 71 c0]
15:05:26.642 -> CH #16, type: 3034, FuncList: 0x0, default: 40, flags: 0x8010000, value: [00 00 00 00 00 30 71 c0]
15:05:26.642 -> CH #17, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [00 00 08 00 00 00 00 00]
15:05:26.676 -> CH #18, type: 11000, FuncList: 0xFC03, default: 700, flags: 0x10000, value: [00 00 08 00 00 00 00 00]
15:05:26.676 -> Send: [53 55 50 4C 41 15 01 00 00 00 45 00 00 00 23 04 00 00 6C 75 6B 61 73 7A 30 36 40 77 70 2E 70 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1A 61 92 7C D9 95 B6 D4 20 36 BA E8 29 C5 B2 2C 60 3B 06 7B 0C EE E0 52 A3 2A 89 C6 7E DE BF FD 45 53 50 33 32 5F 52 65 6C 61 79 5F 58 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:26.812 -> Send: [53 55 50 4C 41 ]
15:05:26.812 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:26.846 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:27.696 -> Relay[5] toggle (duration 0 ms)
15:05:27.696 -> Relay[5] turn OFF (duration 0 ms)
15:05:27.730 ->  **** Digital write[5], gpio: 33; value 0
15:05:27.730 -> Channel(5) value changed to 0
15:05:27.730 -> Relay[7] toggle (duration 0 ms)
15:05:27.764 -> Relay[7] turn ON (duration 0 ms)
15:05:27.764 ->  **** Digital write[7], gpio: 25; value 1
15:05:27.764 -> Channel(7) value changed to 1
15:05:27.900 -> Wrote 8 bytes to storage at 15
15:05:27.900 -> Wrote 1 bytes to storage at 49
15:05:27.900 -> Wrote 8 bytes to storage at 50
15:05:27.900 -> Wrote 7 bytes to storage at 8
15:05:27.900 -> Commit
15:05:27.900 -> Recv: [53 55 50 4C 41 15 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 15 01 53 55 50 4C 41 53 55 50 4C 41 15 02 00 00 00 AA 02 00 00 87 00 00 00 00 AA 01 00 00 00 7F 00 0F 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 02 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 E8 03 4C 1D F4 01 4C 1D 14 00 A0 0F C8 00 E8 03 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 03 00 00 00 AA 02 00 00 6C 01 00 00 00 AA 01 00 00 02 64 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:28.002 -> Device registered (activity timeout 120 s, server version: 21, server min version: 1)
15:05:28.036 -> LAST STATE ADDED: Registered and ready
15:05:28.036 -> Current status: [17] Registered and ready
15:05:28.036 -> Changing activity timeout to 30
15:05:28.036 -> Send: [53 55 50 4C 41 15 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
15:05:28.036 -> Send: [53 55 50 4C 41 ]
15:05:28.036 -> HVAC onRegistered
15:05:28.036 -> HVAC send: IsOn 0, Mode HEAT, tHeat 1000, tCool 0, flags 0x181
15:05:28.070 -> HVAC onRegistered
15:05:28.070 -> HVAC send: IsOn 0, Mode OFF, tHeat 2100, tCool 0, flags 0x181
15:05:28.070 -> Send: [53 55 50 4C 41 15 03 00 00 00 67 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 02 E8 03 00 00 81 01 ]
15:05:28.070 -> Send: [53 55 50 4C 41 ]
15:05:28.104 -> HVAC send: IsOn 0, Mode HEAT, tHeat 1000, tCool 0, flags 0x181
15:05:28.104 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:28.104 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:28.206 -> Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:28.308 -> Received SetChannelConfig for channel 0, function 426, config type 0, config size 127
15:05:28.342 -> HVAC: processing channel config
15:05:28.342 -> Current config:
15:05:28.342 -> HVAC[0]:
15:05:28.342 ->   Main: 15
15:05:28.342 ->   Aux: 0
15:05:28.342 ->   Aux type: 0
15:05:28.342 ->   AntiFreezeAndOverheatProtectionEnabled: 0
15:05:28.342 ->   Sensor: 0
15:05:28.342 ->   Algorithms: 3
15:05:28.342 ->   UsedAlgorithm: 2
15:05:28.342 ->   MinOnTimeS: 0
15:05:28.342 ->   MinOffTimeS: 0
15:05:28.342 ->   OutputValueOnError: 0
15:05:28.376 ->   Subfunction: N/A (0)
15:05:28.376 ->   Setpoint change in weekly schedule: switches to manual
15:05:28.376 ->   AuxMinMaxSetpointEnabled: 0
15:05:28.376 ->   Temperatures:
15:05:28.376 ->     10: 1000
15:05:28.376 ->     11: 7500
15:05:28.376 ->     12: 500
15:05:28.376 ->     13: 7500
15:05:28.376 ->     14: 20
15:05:28.376 ->     15: 4000
15:05:28.376 ->     16: 200
15:05:28.376 ->     17: 1000
15:05:28.376 -> New config:
15:05:28.410 -> HVAC[0]:
15:05:28.410 ->   Main: 15
15:05:28.410 ->   Aux: 0
15:05:28.410 ->   Aux type: 0
15:05:28.410 ->   AntiFreezeAndOverheatProtectionEnabled: 0
15:05:28.410 ->   Sensor: 0
15:05:28.410 ->   Algorithms: 3
15:05:28.410 ->   UsedAlgorithm: 2
15:05:28.410 ->   MinOnTimeS: 0
15:05:28.410 ->   MinOffTimeS: 0
15:05:28.410 ->   OutputValueOnError: 0
15:05:28.410 ->   Subfunction: N/A (0)
15:05:28.410 ->   Setpoint change in weekly schedule: switches to manual
15:05:28.444 ->   AuxMinMaxSetpointEnabled: 0
15:05:28.444 ->   Temperatures:
15:05:28.444 ->     10: 1000
15:05:28.444 ->     11: 7500
15:05:28.444 ->     12: 500
15:05:28.444 ->     13: 7500
15:05:28.444 ->     14: 20
15:05:28.444 ->     15: 4000
15:05:28.444 ->     16: 200
15:05:28.444 ->     17: 1000
15:05:28.444 -> Sending channel config result OK (1)
15:05:28.444 -> Send: [53 55 50 4C 41 15 04 00 00 00 B4 02 00 00 03 00 00 00 01 00 00 ]
15:05:28.478 -> Send: [53 55 50 4C 41 ]
15:05:28.478 -> Send: [53 55 50 4C 41 15 05 00 00 00 E0 01 00 00 00 00 00 00 ]
15:05:28.478 -> Send: [53 55 50 4C 41 ]
15:05:28.512 -> Relay[5] toggle (duration 0 ms)
15:05:28.546 -> Relay[5] turn ON (duration 0 ms)
15:05:28.546 ->  **** Digital write[5], gpio: 33; value 1
15:05:28.546 -> Channel(5) value changed to 1
15:05:28.580 -> Relay[7] toggle (duration 0 ms)
15:05:28.614 -> Relay[7] turn OFF (duration 0 ms)
15:05:28.614 ->  **** Digital write[7], gpio: 25; value 0
15:05:28.614 -> Channel(7) value changed to 0
15:05:29.566 -> Relay[7] toggle (duration 0 ms)
15:05:29.566 -> Relay[7] turn ON (duration 0 ms)
15:05:29.600 ->  **** Digital write[7], gpio: 25; value 1
15:05:29.600 -> Channel(7) value changed to 1
15:05:31.369 -> Relay[7] toggle (duration 0 ms)
15:05:31.369 -> Relay[7] turn OFF (duration 0 ms)
15:05:31.369 ->  **** Digital write[7], gpio: 25; value 0
15:05:31.369 -> Channel(7) value changed to 0
15:05:31.471 -> Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 04 00 00 00 AB 02 00 00 01 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 05 00 00 00 AB 02 00 00 01 00 00 00 01 53 55 50 4C 41 53 55 50 4C 41 15 06 00 00 00 AB 02 00 00 01 00 00 00 02 53 55 50 4C 41 53 55 50 4C 41 15 07 00 00 00 AB 02 00 00 01 00 00 00 03 53 55 50 4C 41 53 55 50 4C 41 15 08 00 00 00 AB 02 00 00 01 00 00 00 04 53 55 50 4C 41 53 55 50 4C 41 15 09 00 00 00 AB 02 00 00 01 00 00 00 05 53 55 50 4C 41 53 55 50 4C 41 15 0A 00 00 00 AB 02 00 00 01 00 00 00 06 53 55 50 4C 41 53 55 50 4C 41 15 0B 00 00 00 AB 02 00 00 01 00 00 00 07 53 55 50 4C 41 53 ]
15:05:31.573 -> Received SetChannelConfig for channel 0, function 426, config type 2, config size 356
15:05:31.573 -> Handling weekly schedule for channel 0
15:05:31.607 -> Program[0], mode 0, tHeat 0, tCool 0
15:05:31.607 -> Program[1], mode 0, tHeat 0, tCool 0
15:05:31.607 -> Program[2], mode 0, tHeat 0, tCool 0
15:05:31.607 -> Program[3], mode 0, tHeat 0, tCool 0
15:05:31.607 -> HVAC weekly schedule saved successfully
15:05:31.607 -> Sending channel config result OK (1)
15:05:31.641 -> Send: [53 55 50 4C 41 15 06 00 00 00 B4 02 00 00 03 00 00 00 01 00 00 ]
15:05:31.641 -> Send: [53 55 50 4C 41 ]
15:05:31.641 -> Send: [53 55 50 4C 41 15 07 00 00 00 A8 02 00 00 06 00 00 00 01 00 00 00 00 00 ]
15:05:31.641 -> Send: [53 55 50 4C 41 ]
15:05:31.641 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:31.675 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:31.709 -> Recv: [55 50 4C 41 15 0C 00 00 00 AB 02 00 00 01 00 00 00 08 53 55 50 4C 41 53 55 50 4C 41 15 0D 00 00 00 AA 02 00 00 87 00 00 00 09 A9 01 00 00 00 7F 00 10 00 00 00 09 00 00 00 09 00 00 00 02 00 03 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 78 EC 88 13 F4 01 4C 1D 14 00 A0 0F C8 00 E8 03 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 0E 00 00 00 AA 02 00 00 6C 01 00 00 09 A9 01 00 00 02 64 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:31.811 -> Received ChannelConfigFinished for channel 0
15:05:31.811 -> Send: [53 55 50 4C 41 15 08 00 00 00 A8 02 00 00 06 00 00 00 02 00 00 00 00 00 ]
15:05:31.811 -> Send: [53 55 50 4C 41 ]
15:05:31.913 -> Wrote 1 bytes to storage at 44
15:05:31.913 -> Wrote 1 bytes to storage at 49
15:05:31.913 -> Wrote 7 bytes to storage at 8
15:05:31.913 -> Commit
15:05:31.913 -> Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:32.015 -> Received ChannelConfigFinished for channel 1
15:05:32.015 -> Element: received channel config finished, but handling is missing
15:05:32.049 -> Send: [53 55 50 4C 41 15 09 00 00 00 A8 02 00 00 06 00 00 00 03 00 00 00 00 00 ]
15:05:32.049 -> Send: [53 55 50 4C 41 ]
15:05:32.287 -> Recv: [00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 0F 00 00 00 AB 02 00 00 01 00 00 00 09 53 55 50 4C 41 53 55 50 4C 41 15 10 00 00 00 AB 02 00 00 01 00 00 00 0A 53 55 50 4C 41 53 55 50 4C 41 15 11 00 00 00 AB 02 00 00 01 00 00 00 0B 53 55 50 4C 41 53 55 50 4C 41 15 12 00 00 00 AB 02 00 00 01 00 00 00 0C 53 55 50 4C 41 53 55 50 4C 41 15 13 00 00 00 AB 02 00 00 01 00 00 00 0D 53 55 50 4C 41 53 55 50 4C 41 15 14 00 00 00 AB 02 00 00 01 00 00 00 0E 53 55 50 4C 41 53 55 50 4C 41 15 15 00 00 00 AA 02 00 00 28 00 00 00 0F 28 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]Relay[5] toggle (duration 0 ms)
15:05:32.389 -> 
15:05:32.389 -> Relay[5] turn OFF (duration 0 ms)
15:05:32.389 -> Received ChannelConfigFinished for channel 2
15:05:32.389 ->  **** Digital write[5], gpio: 33; value 0
15:05:32.423 -> Element: received channel config finished, but handling is missing
15:05:32.423 -> Channel(5) value changed to 0
15:05:32.423 -> Send: [53 55 50 4C 41 15 0A 00 00 00 A8 02 00 00 06 00 00 00 04 00 00 00 00 00 ]
15:05:32.423 -> Send: [53 55 50 4C 41 ]
15:05:32.457 -> Recv: [00 00 53 55 50 4C 41 53 55 50 4C 41 15 16 00 00 00 AB 02 00 00 01 00 00 00 0F 53 55 50 4C 41 53 55 50 4C 41 15 17 00 00 00 AA 02 00 00 28 00 00 00 10 28 00 00 00 00 20 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 18 00 00 00 AB 02 00 00 01 00 00 00 10 53 55 50 4C 41 53 55 50 4C 41 15 19 00 00 00 AB 02 00 00 01 00 00 00 11 53 55 50 4C 41 53 55 50 4C 41 15 1A 00 00 00 AB 02 00 00 01 00 00 00 12 53 55 50 4C 41 53 55 50 4C 41 15 1B 00 00 00 DC 00 00 00 03 00 00 00 1E 0A F0 53 55 50 4C 41 53 55 50 4C 41 15 1C 00 00 00 EA 01 00 00 1A 00 00 00 E7 07 0A 1F 03 0F 05 1E 0E 00 00 00 45 75 72 6F 70 65 2F 57 61 72 73 61 77 00 53 55 50 4C 41 53 55 50 4C 41 15 1D 00 00 00 B2 02 00 00 0C ]
15:05:32.559 -> Received ChannelConfigFinished for channel 3
15:05:32.593 -> Element: received channel config finished, but handling is missing
15:05:32.593 -> Relay[5]: updating timer value: remainingTime=0 state=0
15:05:32.593 -> SRPC sedning: remaining time 0, channel 5, state 0
15:05:32.593 -> Send: [53 55 50 4C 41 15 0B 00 00 00 69 00 00 00 E3 00 00 00 05 32 DD 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:32.695 -> Send: [53 55 50 4C 41 ]
15:05:32.695 -> Send: [53 55 50 4C 41 15 0C 00 00 00 67 00 00 00 0E 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:32.729 -> Send: [53 55 50 4C 41 ]
15:05:32.729 -> Send: [53 55 50 4C 41 15 0D 00 00 00 A8 02 00 00 06 00 00 00 05 00 00 00 00 00 ]
15:05:32.729 -> Send: [53 55 50 4C 41 ]
15:05:32.729 -> Relay[7] toggle (duration 0 ms)
15:05:32.763 -> Relay[7] turn ON (duration 0 ms)
15:05:32.763 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:32.763 ->  **** Digital write[7], gpio: 25; value 1
15:05:32.763 -> Channel(7) value changed to 1
15:05:32.763 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:33.069 -> Relay[5] toggle (duration 0 ms)
15:05:33.103 -> Relay[5] turn ON (duration 0 ms)
15:05:33.103 ->  **** Digital write[5], gpio: 33; value 1
15:05:33.103 -> Channel(5) value changed to 1
15:05:33.103 -> Relay[7] toggle (duration 0 ms)
15:05:33.103 -> Relay[7] turn OFF (duration 0 ms)
15:05:33.103 ->  **** Digital write[7], gpio: 25; value 0
15:05:33.103 -> Channel(7) value changed to 0
15:05:33.887 -> Recv: [00 00 00 01 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 1E 00 00 00 B2 02 00 00 0C 00 00 00 02 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 1F 00 00 00 B2 02 00 00 0C 00 00 00 03 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 20 00 00 00 B2 02 00 00 0C 00 00 00 04 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 21 00 00 00 B2 02 00 00 08 00 00 00 05 82 00 00 00 00 00 00 53 55 50 4C 41 ]
15:05:33.955 -> Received ChannelConfigFinished for channel 4
15:05:33.955 -> Element: received channel config finished, but handling is missing
15:05:33.989 -> Send: [53 55 50 4C 41 15 0E 00 00 00 A8 02 00 00 06 00 00 00 06 00 00 00 00 00 ]
15:05:33.989 -> Send: [53 55 50 4C 41 ]
15:05:33.989 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:34.023 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:34.328 -> Relay[7] toggle (duration 0 ms)
15:05:34.362 -> Relay[7] turn ON (duration 0 ms)
15:05:34.362 ->  **** Digital write[7], gpio: 25; value 1
15:05:34.362 -> Channel(7) value changed to 1
15:05:34.362 -> Relay[5] toggle (duration 0 ms)
15:05:34.362 -> Relay[5] turn OFF (duration 0 ms)
15:05:34.396 ->  **** Digital write[5], gpio: 33; value 0
15:05:34.396 -> Channel(5) value changed to 0
15:05:35.177 -> Recv: [53 55 50 4C 41 15 22 00 00 00 B2 02 00 00 0C 00 00 00 06 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 ]
15:05:35.177 -> Received ChannelConfigFinished for channel 5
15:05:35.177 -> Element: received channel config finished, but handling is missing
15:05:35.211 -> Relay[7]: updating timer value: remainingTime=0 state=0
15:05:35.211 -> SRPC sedning: remaining time 0, channel 7, state 0
15:05:35.211 -> Send: [53 55 50 4C 41 15 0F 00 00 00 69 00 00 00 E3 00 00 00 07 32 DD 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:35.313 -> Relay[5] toggle (duration 0 ms)Send: [53 55 50 4C 41 ]
15:05:35.313 -> 
15:05:35.313 -> Relay[5] turn ON (duration 0 ms)
15:05:35.313 ->  **** Digital write[5], gpio: 33; value 1
15:05:35.313 -> Send: [53 55 50 4C 41 15 10 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 01 00 00 00 00 00 00 00 ]
15:05:35.347 -> Channel(5) value changed to 1
15:05:35.347 -> Send: [53 55 50 4C 41 ]
15:05:35.347 -> Send: [53 55 50 4C 41 15 11 00 00 00 A8 02 00 00 06 00 00 00 07 00 00 00 00 00 ]
15:05:35.347 -> Send: [53 55 50 4C 41 ]
15:05:35.381 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:35.381 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:35.415 -> Relay[7] toggle (duration 0 ms)
15:05:35.415 -> Relay[7] turn OFF (duration 0 ms)
15:05:35.415 ->  **** Digital write[7], gpio: 25; value 0
15:05:35.415 -> Channel(7) value changed to 0
15:05:36.537 -> Relay[5] toggle (duration 0 ms)
15:05:36.537 -> Relay[5] turn OFF (duration 0 ms)
15:05:36.537 ->  **** Digital write[5], gpio: 33; value 0
15:05:36.537 -> Channel(5) value changed to 0
15:05:36.537 -> Recv: [53 55 50 4C 41 15 23 00 00 00 B2 02 00 00 08 00 00 00 07 82 00 00 00 00 00 00 53 55 50 4C 41 ]
15:05:36.571 -> Relay[7] toggle (duration 0 ms)
15:05:36.571 -> Received ChannelConfigFinished for channel 6
15:05:36.571 -> Relay[7] turn ON (duration 0 ms)
15:05:36.571 -> Element: received channel config finished, but handling is missing
15:05:36.571 ->  **** Digital write[7], gpio: 25; value 1
15:05:36.571 -> Channel(7) value changed to 1
15:05:36.605 -> Send: [53 55 50 4C 41 15 12 00 00 00 A8 02 00 00 06 00 00 00 08 00 00 00 00 00 ]
15:05:36.605 -> Send: [53 55 50 4C 41 ]
15:05:36.605 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:36.639 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:36.707 -> Received ChannelConfigFinished for channel 7
15:05:36.707 -> Element: received channel config finished, but handling is missing
15:05:36.741 -> Send: [53 55 50 4C 41 15 13 00 00 00 67 00 00 00 0E 00 00 00 09 00 00 00 00 00 00 01 34 08 00 00 81 01 ]
15:05:36.741 -> Send: [53 55 50 4C 41 ]
15:05:36.741 -> HVAC send: IsOn 0, Mode OFF, tHeat 2100, tCool 0, flags 0x181
15:05:36.979 -> Recv: [53 55 50 4C 41 15 24 00 00 00 B2 02 00 00 0C 00 00 00 08 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 ]
15:05:37.013 -> Received ChannelConfigFinished for channel 8
15:05:37.013 -> Element: received channel config finished, but handling is missing
15:05:37.013 -> Send: [53 55 50 4C 41 15 14 00 00 00 E0 01 00 00 00 00 00 00 ]
15:05:37.013 -> Send: [53 55 50 4C 41 ]
15:05:37.047 -> Relay[7] toggle (duration 0 ms)
15:05:37.047 -> Relay[7] turn OFF (duration 0 ms)
15:05:37.047 ->  **** Digital write[7], gpio: 25; value 0
15:05:37.081 -> Channel(7) value changed to 0
15:05:37.115 -> Wrote 1 bytes to storage at 44
15:05:37.115 -> Wrote 7 bytes to storage at 8
15:05:37.149 -> Commit
15:05:37.149 -> Recv: [53 55 50 4C 41 15 25 00 00 00 EA 01 00 00 1A 00 00 00 E7 07 0A 1F 03 0F 05 26 0E 00 00 00 45 75 72 6F 70 65 2F 57 61 72 73 61 77 00 53 55 50 4C 41 ]
15:05:37.149 -> Received SetChannelConfig for channel 9, function 425, config type 0, config size 127
15:05:37.183 -> HVAC: processing channel config
15:05:37.183 -> Sending channel config result FUNCTION_NOT_SUPPORTED (4)
15:05:37.183 -> Send: [53 55 50 4C 41 15 15 00 00 00 B4 02 00 00 03 00 00 00 04 00 09 ]
15:05:37.183 -> Send: [53 55 50 4C 41 ]
15:05:37.183 -> Send: [53 55 50 4C 41 15 16 00 00 00 A8 02 00 00 06 00 00 00 0A 00 00 00 00 00 ]
15:05:37.217 -> Send: [53 55 50 4C 41 ]
15:05:37.251 -> Received SetChannelConfig for channel 9, function 425, config type 2, config size 356
15:05:37.251 -> Handling weekly schedule for channel 9
15:05:37.251 -> Program[0], mode 0, tHeat 0, tCool 0
15:05:37.251 -> Program[1], mode 0, tHeat 0, tCool 0
15:05:37.285 -> Program[2], mode 0, tHeat 0, tCool 0
15:05:37.285 -> Program[3], mode 0, tHeat 0, tCool 0
15:05:37.285 -> HVAC weekly schedule saved successfully
15:05:37.285 -> Sending channel config result OK (1)
15:05:37.285 -> Send: [53 55 50 4C 41 15 17 00 00 00 B4 02 00 00 03 00 00 00 01 00 09 ]
15:05:37.285 -> Send: [53 55 50 4C 41 ]
15:05:37.319 -> Send: [53 55 50 4C 41 15 18 00 00 00 A8 02 00 00 06 00 00 00 0B 00 00 00 00 00 ]
15:05:37.319 -> Send: [53 55 50 4C 41 ]
15:05:37.353 -> Recv: [53 55 50 4C 41 15 26 00 00 00 B2 02 00 00 0C 00 00 00 0A BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 ]
15:05:37.387 -> Received ChannelConfigFinished for channel 9
15:05:37.387 -> Send: [53 55 50 4C 41 15 19 00 00 00 A8 02 00 00 06 00 00 00 0C 00 00 00 00 00 ]
15:05:37.387 -> Send: [53 55 50 4C 41 ]
15:05:37.489 -> Recv: [53 55 50 4C 41 15 27 00 00 00 B2 02 00 00 0C 00 00 00 0B BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 53 55 50 4C 41 15 28 00 00 00 B2 02 00 00 0C 00 00 00 0C BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 ]
15:05:37.523 -> Received ChannelConfigFinished for channel 10
15:05:37.523 -> Element: received channel config finished, but handling is missing
15:05:37.523 -> Send: [53 55 50 4C 41 15 1A 00 00 00 A8 02 00 00 06 00 00 00 0D 00 00 00 00 00 ]
15:05:37.523 -> Send: [53 55 50 4C 41 ]
15:05:37.625 -> Received ChannelConfigFinished for channel 11
15:05:37.625 -> Element: received channel config finished, but handling is missing
15:05:37.625 -> Relay[14]: updating timer value: remainingTime=0 state=0
15:05:37.625 -> SRPC sedning: remaining time 0, channel 14, state 0
15:05:37.659 -> Send: [53 55 50 4C 41 15 1B 00 00 00 69 00 00 00 E3 00 00 00 0E 32 DD 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:37.761 -> Send: [53 55 50 4C 41 ]
15:05:37.761 -> Send: [53 55 50 4C 41 15 1C 00 00 00 A8 02 00 00 06 00 00 00 0E 00 00 00 00 00 ]
15:05:37.761 -> Send: [53 55 50 4C 41 ]
15:05:37.761 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:37.795 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:37.795 -> Recv: [53 55 50 4C 41 15 29 00 00 00 B2 02 00 00 0C 00 00 00 0D BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 ]
15:05:37.829 -> Received ChannelConfigFinished for channel 12
15:05:37.829 -> Element: received channel config finished, but handling is missing
15:05:37.829 -> Send: [53 55 50 4C 41 15 1D 00 00 00 67 00 00 00 0E 00 00 00 0F 00 00 00 00 00 00 00 00 00 00 30 71 C0 ]
15:05:37.863 -> Send: [53 55 50 4C 41 ]
15:05:37.897 -> Relay[7] toggle (duration 0 ms)
15:05:37.897 -> Relay[7] turn ON (duration 0 ms)
15:05:37.897 ->  **** Digital write[7], gpio: 25; value 1
15:05:37.897 -> Channel(7) value changed to 1
15:05:38.237 -> Relay[7] toggle (duration 0 ms)
15:05:38.271 -> Relay[7] turn OFF (duration 0 ms)
15:05:38.271 ->  **** Digital write[7], gpio: 25; value 0
15:05:38.271 -> Channel(7) value changed to 0
15:05:38.271 -> Recv: [53 55 50 4C 41 15 2A 00 00 00 B2 02 00 00 08 00 00 00 0E 82 00 00 00 00 00 00 53 55 50 4C 41 ]
15:05:38.271 -> Received ChannelConfigFinished for channel 13
15:05:38.305 -> Element: received channel config finished, but handling is missing
15:05:38.305 -> Send: [53 55 50 4C 41 15 1E 00 00 00 67 00 00 00 0E 00 00 00 10 00 00 00 00 00 00 00 00 00 00 30 71 C0 ]
15:05:38.305 -> Send: [53 55 50 4C 41 ]
15:05:38.373 -> Relay[5] toggle (duration 0 ms)
15:05:38.373 -> Relay[5] turn ON (duration 0 ms)
15:05:38.373 ->  **** Digital write[5], gpio: 33; value 1
15:05:38.373 -> Channel(5) value changed to 1
15:05:38.611 -> Relay[7] toggle (duration 0 ms)
15:05:38.611 -> Relay[7] turn ON (duration 0 ms)
15:05:38.611 ->  **** Digital write[7], gpio: 25; value 1
15:05:38.611 -> Channel(7) value changed to 1
15:05:40.888 -> Relay[5] toggle (duration 0 ms)
15:05:40.888 -> Relay[5] turn OFF (duration 0 ms)
15:05:40.888 ->  **** Digital write[5], gpio: 33; value 0
15:05:40.888 -> Channel(5) value changed to 0
15:05:41.024 -> Relay[7] toggle (duration 0 ms)
15:05:41.024 -> Relay[7] turn OFF (duration 0 ms)
15:05:41.024 ->  **** Digital write[7], gpio: 25; value 0
15:05:41.024 -> Channel(7) value changed to 0
15:05:41.058 -> Received ChannelConfigFinished for channel 14
15:05:41.058 -> Element: received channel config finished, but handling is missing
15:05:41.058 -> Send: [53 55 50 4C 41 15 1F 00 00 00 A8 02 00 00 06 00 00 00 11 00 00 00 00 00 ]
15:05:41.058 -> Send: [53 55 50 4C 41 ]
15:05:41.092 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:41.092 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:41.126 -> Recv: [53 55 50 4C 41 15 2B 00 00 00 B2 02 00 00 0C 00 00 00 11 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 ]
15:05:41.126 -> Received SetChannelConfig for channel 15, function 40, config type 0, config size 32
15:05:41.126 -> handleChannelConfig, func 40, configtype 0, configsize 32
15:05:41.160 -> Channel[15] temperature correction 0.000000
15:05:41.160 -> Channel[15] humidity correction 0.000000
15:05:41.160 -> Channel[15] config changed offline flag 0
15:05:41.160 -> Sending channel config result OK (1)
15:05:41.160 -> Send: [53 55 50 4C 41 15 20 00 00 00 B4 02 00 00 03 00 00 00 01 00 0F ]
15:05:41.194 -> Send: [53 55 50 4C 41 ]
15:05:41.194 -> Send: [53 55 50 4C 41 15 21 00 00 00 A8 02 00 00 06 00 00 00 12 00 00 00 00 00 ]
15:05:41.194 -> Send: [53 55 50 4C 41 ]
15:05:41.229 -> Received ChannelConfigFinished for channel 15
15:05:41.229 -> Send: [53 55 50 4C 41 15 22 00 00 00 E0 01 00 00 00 00 00 00 ]
15:05:41.263 -> Send: [53 55 50 4C 41 ]
15:05:41.263 -> Received SetChannelConfig for channel 16, function 40, config type 0, config size 32
15:05:41.297 -> handleChannelConfig, func 40, configtype 0, configsize 32
15:05:41.297 -> Channel[16] temperature correction 0.000000
15:05:41.297 -> Channel[16] humidity correction 0.000000
15:05:41.297 -> Channel[16] config changed offline flag 0
15:05:41.297 -> Sending channel config result OK (1)
15:05:41.297 -> Send: [53 55 50 4C 41 15 23 00 00 00 B4 02 00 00 03 00 00 00 01 00 10 ]
15:05:41.331 -> Send: [53 55 50 4C 41 ]
15:05:41.399 -> Recv: [53 55 50 4C 41 15 2C 00 00 00 B2 02 00 00 0C 00 00 00 12 BC 02 00 00 00 04 00 00 00 00 00 53 55 50 4C 41 ]
15:05:41.399 -> Received ChannelConfigFinished for channel 16
15:05:41.399 -> Send: [53 55 50 4C 41 15 24 00 00 00 67 00 00 00 0E 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:41.433 -> Send: [53 55 50 4C 41 ]
15:05:41.467 -> Recv: [53 55 50 4C 41 15 2D 00 00 00 EA 01 00 00 1A 00 00 00 E7 07 0A 1F 03 0F 05 2B 0E 00 00 00 45 75 72 6F 70 65 2F 57 61 72 73 61 77 00 53 55 50 4C 41 ]
15:05:41.467 -> Received ChannelConfigFinished for channel 17
15:05:41.501 -> Element: received channel config finished, but handling is missing
15:05:41.501 -> Send: [53 55 50 4C 41 15 25 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:41.501 -> Send: [53 55 50 4C 41 ]
15:05:41.570 -> Received ChannelConfigFinished for channel 18
15:05:41.570 -> Element: received channel config finished, but handling is missing
15:05:41.570 -> Send: [53 55 50 4C 41 15 26 00 00 00 A9 02 00 00 87 00 00 00 09 A9 01 00 00 00 7F 00 10 00 00 00 09 00 00 00 09 00 00 00 02 00 03 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 78 EC 88 13 F4 01 4C 1D 14 00 A0 0F C8 00 E8 03 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:41.638 -> Send: [53 55 50 4C 41 ]
15:05:41.638 -> HVAC[9]: default channel config send
15:05:41.740 -> Recv: [53 55 50 4C 41 15 2E 00 00 00 B3 02 00 00 03 00 00 00 01 00 09 53 55 50 4C 41 ]
15:05:41.740 -> Activity timeout set to 30 s
15:05:41.774 -> Current local time: 1970-1-1 0:0:21
15:05:41.774 -> Clock: time diff (system-new): -1698764709 s
15:05:41.774 -> Clock: new local time: 2023-10-31 15:5:30
15:05:41.774 -> HVAC[0]: updating timer value: remainingTime=0 s
15:05:41.774 -> SRPC sedning: remaining time 0 s, channel 0
15:05:41.808 -> Send: [53 55 50 4C 41 15 27 00 00 00 69 00 00 00 E3 00 00 00 00 33 DD 00 00 00 00 00 00 00 00 02 FC 03 00 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:41.876 -> Send: [53 55 50 4C 41 ]
15:05:41.910 -> HVAC[9]: updating timer value: remainingTime=0 s
15:05:41.910 -> SRPC sedning: remaining time 0 s, channel 9
15:05:41.910 -> Send: [53 55 50 4C 41 15 28 00 00 00 69 00 00 00 E3 00 00 00 09 33 DD 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:42.012 -> Send: [53 55 50 4C 41 ]
15:05:42.080 -> Recv: [53 55 50 4C 41 15 2F 00 00 00 AA 02 00 00 87 00 00 00 09 A9 01 00 00 00 7F 00 10 00 00 00 09 00 00 00 09 00 00 00 02 00 03 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FC 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 78 EC 88 13 F4 01 4C 1D 14 00 A0 0F C8 00 E8 03 00 00 00 00 00 00 00 00 00 00 00 00 53 55 50 4C 41 ]
15:05:42.148 -> AT[1] received config with active actions: 0x0
15:05:42.182 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:42.182 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:42.216 -> Wrote 8 bytes to storage at 15
15:05:42.216 -> Wrote 8 bytes to storage at 50
15:05:42.216 -> Wrote 7 bytes to storage at 8
15:05:42.216 -> Commit
15:05:42.216 -> AT[2] received config with active actions: 0x0
15:05:42.216 -> Send: [53 55 50 4C 41 15 29 00 00 00 67 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 02 E8 03 00 00 81 00 ]
15:05:42.250 -> Send: [53 55 50 4C 41 ]
15:05:42.250 -> HVAC send: IsOn 0, Mode HEAT, tHeat 1000, tCool 0, flags 0x81
15:05:42.318 -> AT[3] received config with active actions: 0x0
15:05:42.318 -> Send: [53 55 50 4C 41 15 2A 00 00 00 67 00 00 00 0E 00 00 00 09 00 00 00 00 00 00 01 34 08 00 00 81 00 ]
15:05:42.318 -> Send: [53 55 50 4C 41 ]
15:05:42.318 -> HVAC send: IsOn 0, Mode OFF, tHeat 2100, tCool 0, flags 0x81
15:05:42.420 -> AT[4] received config with active actions: 0x0
15:05:42.488 -> Relay::handleChannelConfig, func 130, configtype 0, configsize 0
15:05:42.522 -> AT[6] received config with active actions: 0x0
15:05:42.557 -> Relay::handleChannelConfig, func 130, configtype 0, configsize 0
15:05:42.591 -> Relay[7] toggle (duration 0 ms)
15:05:42.591 -> Relay[7] turn ON (duration 0 ms)
15:05:42.591 ->  **** Digital write[7], gpio: 25; value 1
15:05:42.591 -> Channel(7) value changed to 1
15:05:42.591 -> Relay[5] toggle (duration 0 ms)
15:05:42.591 -> Relay[5] turn ON (duration 0 ms)
15:05:42.591 ->  **** Digital write[5], gpio: 33; value 1
15:05:42.625 -> Channel(5) value changed to 1
15:05:43.441 -> Relay[5] toggle (duration 0 ms)
15:05:43.441 -> Relay[5] turn OFF (duration 0 ms)
15:05:43.441 ->  **** Digital write[5], gpio: 33; value 0
15:05:43.441 -> Channel(5) value changed to 0
15:05:43.475 -> AT[8] received config with active actions: 0x0
15:05:43.509 -> Send: [53 55 50 4C 41 15 2B 00 00 00 67 00 00 00 0E 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:43.509 -> Send: [53 55 50 4C 41 ]
15:05:43.543 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:43.543 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:43.816 -> Current local time: 2023-10-31 15:5:32
15:05:43.850 -> Clock: time diff (system-new): -6 s
15:05:43.850 -> Clock: new local time: 2023-10-31 15:5:38
15:05:43.850 -> Send: [53 55 50 4C 41 15 2C 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 01 00 00 00 00 00 00 00 ]
15:05:43.850 -> Send: [53 55 50 4C 41 ]
15:05:43.884 -> AT[10] received config with active actions: 0x0
15:05:44.292 -> AT[11] received config with active actions: 0x0
15:05:47.080 -> Relay[5] toggle (duration 0 ms)
15:05:47.080 -> Relay[5] turn ON (duration 0 ms)
15:05:47.080 ->  **** Digital write[5], gpio: 33; value 1
15:05:47.114 -> Channel(5) value changed to 1
15:05:47.216 -> Relay[7] toggle (duration 0 ms)
15:05:47.216 -> Relay[7] turn OFF (duration 0 ms)
15:05:47.250 ->  **** Digital write[7], gpio: 25; value 0
15:05:47.250 -> Channel(7) value changed to 0
15:05:48.168 -> Relay[7] toggle (duration 0 ms)
15:05:48.202 -> Relay[7] turn ON (duration 0 ms)
15:05:48.202 ->  **** Digital write[7], gpio: 25; value 1
15:05:48.202 -> Channel(7) value changed to 1
15:05:48.202 -> Relay[5] toggle (duration 0 ms)
15:05:48.202 -> Relay[5] turn OFF (duration 0 ms)
15:05:48.202 ->  **** Digital write[5], gpio: 33; value 0
15:05:48.236 -> Channel(5) value changed to 0
15:05:49.766 -> Relay[7] toggle (duration 0 ms)
15:05:49.766 -> Relay[7] turn OFF (duration 0 ms)
15:05:49.766 ->  **** Digital write[7], gpio: 25; value 0
15:05:49.766 -> Channel(7) value changed to 0
15:05:49.766 -> AT[12] received config with active actions: 0x0
15:05:49.766 -> Send: [53 55 50 4C 41 15 2D 00 00 00 67 00 00 00 0E 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:49.800 -> Send: [53 55 50 4C 41 ]
15:05:49.800 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:49.834 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:49.834 -> AT[13] received config with active actions: 0x0
15:05:49.868 -> Send: [53 55 50 4C 41 15 2E 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:49.868 -> Send: [53 55 50 4C 41 ]
15:05:49.902 -> Relay::handleChannelConfig, func 130, configtype 0, configsize 0
15:05:50.004 -> AT[17] received config with active actions: 0x0
15:05:50.038 -> AT[18] received config with active actions: 0x0
15:05:50.106 -> Current local time: 2023-10-31 15:5:44
15:05:50.106 -> Clock: time diff (system-new): 1 s
15:05:50.106 -> Clock: new local time: 2023-10-31 15:5:43
15:05:50.140 -> HVAC set channel config succeeded (1)
15:05:50.446 -> Received SetChannelConfig for channel 9, function 425, config type 0, config size 127
15:05:50.480 -> HVAC: processing channel config
15:05:50.480 -> Sending channel config result FUNCTION_NOT_SUPPORTED (4)
15:05:50.480 -> Send: [53 55 50 4C 41 15 2F 00 00 00 B4 02 00 00 03 00 00 00 04 00 09 ]
15:05:50.480 -> Send: [53 55 50 4C 41 ]
15:05:50.718 -> Relay[7] toggle (duration 0 ms)
15:05:50.718 -> Relay[7] turn ON (duration 0 ms)
15:05:50.718 ->  **** Digital write[7], gpio: 25; value 1
15:05:50.718 -> Channel(7) value changed to 1
15:05:50.718 -> Send: [53 55 50 4C 41 15 30 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 01 00 00 00 00 00 00 00 ]
15:05:50.752 -> Send: [53 55 50 4C 41 ]
15:05:52.318 -> Relay[7] toggle (duration 0 ms)
15:05:52.318 -> Relay[7] turn OFF (duration 0 ms)
15:05:52.318 ->  **** Digital write[7], gpio: 25; value 0
15:05:52.352 -> Channel(7) value changed to 0
15:05:52.352 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:52.386 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:52.420 -> Send: [53 55 50 4C 41 15 31 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:52.420 -> Send: [53 55 50 4C 41 ]
15:05:52.794 -> Relay[7] toggle (duration 0 ms)
15:05:52.794 -> Relay[7] turn ON (duration 0 ms)
15:05:52.794 ->  **** Digital write[7], gpio: 25; value 1
15:05:52.794 -> Channel(7) value changed to 1
15:05:54.395 -> Relay[7] toggle (duration 0 ms)
15:05:54.395 -> Relay[7] turn OFF (duration 0 ms)
15:05:54.395 ->  **** Digital write[7], gpio: 25; value 0
15:05:54.395 -> Channel(7) value changed to 0
15:05:54.429 -> Send: [53 55 50 4C 41 15 32 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:54.429 -> Send: [53 55 50 4C 41 ]
15:05:54.429 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:54.429 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:54.463 -> Relay[5] toggle (duration 0 ms)
15:05:54.463 -> Relay[5] turn ON (duration 0 ms)
15:05:54.463 ->  **** Digital write[5], gpio: 33; value 1
15:05:54.463 -> Channel(5) value changed to 1
15:05:55.790 -> Relay[7] toggle (duration 0 ms)
15:05:55.790 -> Relay[7] turn ON (duration 0 ms)
15:05:55.790 ->  **** Digital write[7], gpio: 25; value 1
15:05:55.790 -> Channel(7) value changed to 1
15:05:56.333 -> Relay[7] toggle (duration 0 ms)
15:05:56.333 -> Relay[7] turn OFF (duration 0 ms)
15:05:56.367 ->  **** Digital write[7], gpio: 25; value 0
15:05:56.367 -> Channel(7) value changed to 0
15:05:56.469 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:56.469 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:56.503 -> Wrote 1 bytes to storage at 44
15:05:56.503 -> Wrote 7 bytes to storage at 8
15:05:56.503 -> Commit
15:05:56.503 -> Send: [53 55 50 4C 41 15 33 00 00 00 67 00 00 00 0E 00 00 00 05 00 00 00 00 00 01 00 00 00 00 00 00 00 ]
15:05:56.537 -> Send: [53 55 50 4C 41 ]
15:05:56.877 -> Send: [53 55 50 4C 41 15 34 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:56.877 -> Send: [53 55 50 4C 41 ]
15:05:57.115 -> Relay[5] toggle (duration 0 ms)
15:05:57.115 -> Relay[5] turn OFF (duration 0 ms)
15:05:57.115 ->  **** Digital write[5], gpio: 33; value 0
15:05:57.115 -> Channel(5) value changed to 0
15:05:57.183 -> Send: [53 55 50 4C 41 15 35 00 00 00 67 00 00 00 0E 00 00 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:05:57.183 -> Send: [53 55 50 4C 41 ]
15:05:57.217 -> Relay[7] toggle (duration 0 ms)
15:05:57.217 -> Relay[7] turn ON (duration 0 ms)
15:05:57.217 ->  **** Digital write[7], gpio: 25; value 1
15:05:57.217 -> Channel(7) value changed to 1
15:05:57.524 -> Send: [53 55 50 4C 41 15 36 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 01 00 00 00 00 00 00 00 ]
15:05:57.524 -> Send: [53 55 50 4C 41 ]
15:05:57.557 -> Relay[7] toggle (duration 0 ms)
15:05:57.557 -> Relay[7] turn OFF (duration 0 ms)
15:05:57.557 ->  **** Digital write[7], gpio: 25; value 0
15:05:57.557 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:57.557 -> Channel(7) value changed to 0
15:05:57.591 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:05:57.591 -> Relay[5] toggle (duration 0 ms)
15:05:57.591 -> Relay[5] turn ON (duration 0 ms)
15:05:57.591 ->  **** Digital write[5], gpio: 33; value 1
15:05:57.591 -> Channel(5) value changed to 1
15:05:57.795 -> Relay[5] toggle (duration 0 ms)
15:05:57.795 -> Relay[5] turn OFF (duration 0 ms)
15:05:57.795 ->  **** Digital write[5], gpio: 33; value 0
15:05:57.795 -> Channel(5) value changed to 0
15:05:58.237 -> Relay[5] toggle (duration 0 ms)
15:05:58.237 -> Relay[5] turn ON (duration 0 ms)
15:05:58.237 ->  **** Digital write[5], gpio: 33; value 1
15:05:58.237 -> Channel(5) value changed to 1
15:05:58.237 -> Relay[7] toggle (duration 0 ms)
15:05:58.271 -> Relay[7] turn ON (duration 0 ms)
15:05:58.271 ->  **** Digital write[7], gpio: 25; value 1
15:05:58.271 -> Channel(7) value changed to 1
15:05:59.836 -> Relay[7] toggle (duration 0 ms)
15:05:59.836 -> Relay[7] turn OFF (duration 0 ms)
15:05:59.836 ->  **** Digital write[7], gpio: 25; value 0
15:05:59.836 -> Channel(7) value changed to 0
15:06:00.142 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:06:00.176 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:06:00.210 -> Send: [53 55 50 4C 41 15 37 00 00 00 67 00 00 00 0E 00 00 00 05 00 00 00 00 00 01 00 00 00 00 00 00 00 ]
15:06:00.244 -> Send: [53 55 50 4C 41 ]
15:06:00.652 -> Send: [53 55 50 4C 41 15 38 00 00 00 67 00 00 00 0E 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
15:06:00.686 -> Send: [53 55 50 4C 41 ]
15:06:01.502 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:06:01.536 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:06:02.250 -> Relay[7] toggle (duration 0 ms)
15:06:02.250 -> Relay[7] turn ON (duration 0 ms)
15:06:02.250 ->  **** Digital write[7], gpio: 25; value 1
15:06:02.250 -> Channel(7) value changed to 1
15:06:35.087 -> Relay[7] toggle (duration 0 ms)
15:06:35.087 -> Relay[7] turn OFF (duration 0 ms)
15:06:35.087 ->  **** Digital write[7], gpio: 25; value 0
15:06:35.087 -> Channel(7) value changed to 0
15:06:36.650 -> Relay[7] toggle (duration 0 ms)
15:06:36.650 -> Relay[7] turn ON (duration 0 ms)
15:06:36.650 ->  **** Digital write[7], gpio: 25; value 1
15:06:36.650 -> Channel(7) value changed to 1
15:07:07.382 -> TIMEOUT - lost connection with server
15:07:07.382 -> LAST STATE ADDED: Not connected to Supla server
15:07:07.382 -> Current status: [6] Not connected to Supla server
15:07:07.416 -> Deinitializing SRPC
15:07:07.416 -> HVAC[0]: invalid temperature readout - check if your thermometer is correctly connected and configured
15:07:07.416 -> HVAC[9]: invalid temperature readout - check if your thermometer is correctly connected and configured

lukasz06 · Post Tue Oct 31, 2023 2:19 pm

krycha88 wrote: Tue Oct 31, 2023 2:07 pm
lukasz06 wrote: Tue Oct 31, 2023 1:50 pm Wrzuciłem wersje 29 ale nic to nie zmienia, samoczynna zmiana ekranu, aż można oczopląsu dostać.
Bo pewnie ustawiasz czas odświeżania ekranu na 1s

Ekran mam 0s i przyciskiem sam zmieniałem ekrany,.
Zmieniłem na 10s, to się zmienia jak powinno, ale ja nie chciałem, żeby się samo zmieniało

Poza tym przyciski też nie działają

krycha88 · Post Tue Oct 31, 2023 3:04 pm

lukasz06 wrote: Tue Oct 31, 2023 2:19 pm
krycha88 wrote: Tue Oct 31, 2023 2:07 pm
lukasz06 wrote: Tue Oct 31, 2023 1:50 pm Wrzuciłem wersje 29 ale nic to nie zmienia, samoczynna zmiana ekranu, aż można oczopląsu dostać.
Bo pewnie ustawiasz czas odświeżania ekranu na 1s
Ekran mam 0s i przyciskiem sam zmieniałem ekrany,.
Zmieniłem na 10s, to się zmienia jak powinno, ale ja nie chciałem, żeby się samo zmieniało
Poza tym przyciski też nie działają

I z takiego opisu problemu można coś zrozumieć i podziałać. Nie dodałem jeszcze obsługi zmiany ekranu z przycisku.