Głowice termostatyczne i termostaty ścienne - [bramka ZigBee]

Moderator: vajera

User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

lukasz06 wrote: Sun Feb 23, 2025 3:03 pm Sonoff ma chyba tylko 1 głowice Zigbee. Tą co Ty kupiłeś. Zastanawiałem się rok temu, ale właśnie opinie mnie zniechęciły. Z tego co pamiętam to głośno pracowała i otwierała się na full, a zamykała do zera.
Też czytałem te opinie, ale czytałem również, że to wina oryginalnego firmware Sonoff'a a glowica ma możliwość regulacji zaworu od 0% do 100% w sposób płynny.
Paczka leży od wczoraj, może wieczorem rozpakuję.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

Dokładnie tak jak piszesz. Widząc Twoje podejście do tematu zrobisz lepiej jak producent ;)
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

lukasz06 wrote: Sun Feb 23, 2025 8:38 pm Dokładnie tak jak piszesz. Widząc Twoje podejście do tematu zrobisz lepiej jak producent ;)
Sonoff TRVZB musi poczekać na testy bo urządzenie nie wejdzie w tryb parowania bez kalibracji, która wymaga założenia go na kaloryfer...
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

vajera wrote: Mon Feb 24, 2025 11:17 am
lukasz06 wrote: Sun Feb 23, 2025 8:38 pm Dokładnie tak jak piszesz. Widząc Twoje podejście do tematu zrobisz lepiej jak producent ;)
Sonoff TRVZB musi poczekać na testy bo urządzenie nie wejdzie w tryb parowania bez kalibracji, która wymaga założenia go na kaloryfer...
Weź jakąś monetę lub cokolwiek co jest w stanie przyblokować trzpień. Przyłóż do głowicy i zasymuluj kalibrację. Skalibruje się z d..y, ale będzie działać. Do testów powinno wystarczyć. Sam tak robiłem ostatnio.
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
Yepestis
Posts: 890
Joined: Mon Sep 24, 2018 6:08 pm
Location: Wrocław
Has thanked: 19 times
Been thanked: 3 times

Post

Głowica TRV603-WZ

https://www.zigbee2mqtt.io/devices/TRV6 ... -trv603-wz

https://pl.aliexpress.com/item/10050077 ... 1c24lzomqk
Peer Manufacturer is "_TZE284_ymldrmzx"
Peer Model is "TS0601"

Code: Select all

                            ============ After Setup End =============
[ 34060][V][ZigbeeCore.cpp:372] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 34062][V][ZigbeeCore.cpp:372] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[ 34593][I][ZigbeeCore.cpp:325] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xb3c2)
[ 34594][V][ZigbeeCore.cpp:329] esp_zb_app_signal_handler(): Device capabilities: 0x80
[ 34594][D][ZigbeeGateway.cpp:459] zbDeviceAnnce(): zbDeviceAnnce short address (0xb3c2), ieee_addr (0xa4):(0xc1):(0x38):(0x6e):(0x6a):(0xf8):(0xb0):(0x69)
[ 34595][D][ZigbeeGateway.cpp:462] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0xb3c2), ieee_addr (0xa4):(0xc1):(0x38):(0x6e):(0x6a):(0xf8):(0xb0):(0x69)
[ 34596][I][ZigbeeGateway.cpp:496] zbDeviceAnnce(): Tuya magic last hope
[ 34840][I][ZigbeeGateway.cpp:531] printJoinedDevices(): joined devices:
[ 34841][I][ZigbeeGateway.cpp:534] printJoinedDevices(): Device on endpoint 1, short address: 0xb3c2
[ 34919][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 34920][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 34921][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[ 34921][I][ZigbeeGateway.cpp:330] zbReadBasicCluster(): Peer Manufacturer is "_TZE284_ymldrmzx"
[ 34922][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[ 34923][I][ZigbeeGateway.cpp:343] zbReadBasicCluster(): ZCL version id is "3"
[ 34923][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(77)
[ 34924][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): ZCL application version id is "77"
[ 34924][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[ 34925][I][ZigbeeGateway.cpp:337] zbReadBasicCluster(): Peer Model is "TS0601"
[ 34925][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(3)
[ 34926][I][ZigbeeGateway.cpp:355] zbReadBasicCluster(): ZCL power source id is "3"
[ 34926][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0xfffe), type(0x30), value(0)
[ 34927][I][ZigbeeGateway.cpp:359] zbReadBasicCluster(): Attribute 0xFFFE, data type 0x30
[ 34930][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 34931][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xb3c2), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0x0
[ 34931][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 35041][I][ZigbeeGateway.cpp:297] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x0
[ 35080][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 35080][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 35081][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[ 35082][I][ZigbeeGateway.cpp:343] zbReadBasicCluster(): ZCL version id is "3"
[ 35541][I][ZigbeeGateway.cpp:303] zbQueryDeviceBasicCluster(): basic tsn 0x2
[ 35542][I][ZigbeeGateway.cpp:297] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 35581][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 35581][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 35582][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[ 35583][I][ZigbeeGateway.cpp:330] zbReadBasicCluster(): Peer Manufacturer is "_TZE284_ymldrmzx"
[ 36042][I][ZigbeeGateway.cpp:303] zbQueryDeviceBasicCluster(): basic tsn 0x3
[ 36043][I][ZigbeeGateway.cpp:297] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x0
[ 36093][V][ZigbeeCore.cpp:372] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[ 36097][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 36098][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 36098][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[ 36099][I][ZigbeeGateway.cpp:343] zbReadBasicCluster(): ZCL version id is "3"
[ 36218][I][ZigbeeCore.cpp:356] esp_zb_app_signal_handler(): Network(0xda75) is open for 180 seconds
[ 36543][I][ZigbeeGateway.cpp:303] zbQueryDeviceBasicCluster(): basic tsn 0x4
[ 36544][I][ZigbeeGateway.cpp:297] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x1
[ 36680][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 36680][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 36681][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(77)
[ 36681][I][ZigbeeGateway.cpp:349] zbReadBasicCluster(): ZCL application version id is "77"
[ 37044][I][ZigbeeGateway.cpp:303] zbQueryDeviceBasicCluster(): basic tsn 0x5
[ 37045][I][ZigbeeGateway.cpp:297] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[ 37244][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 37245][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 37245][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[ 37246][I][ZigbeeGateway.cpp:337] zbReadBasicCluster(): Peer Model is "TS0601"
[ 37545][I][ZigbeeGateway.cpp:303] zbQueryDeviceBasicCluster(): basic tsn 0x6
[ 37546][I][ZigbeeGateway.cpp:297] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x7
[ 37812][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 37812][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 37813][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(3)
[ 37814][I][ZigbeeGateway.cpp:355] zbReadBasicCluster(): ZCL power source id is "3"
[ 38046][I][ZigbeeGateway.cpp:303] zbQueryDeviceBasicCluster(): basic tsn 0x7
[ 38047][I][ZigbeeGateway.cpp:314] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0xfffe
[ 38125][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 38126][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 38126][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0xfffe), type(0x30), value(0)
[ 38127][I][ZigbeeGateway.cpp:359] zbReadBasicCluster(): Attribute 0xFFFE, data type 0x30
[ 38547][I][ZigbeeGateway.cpp:924] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[ 38689][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1001) callback
[ 38689][V][ZigbeeHandlers.cpp:187] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 38690][V][ZigbeeHandlers.cpp:194] zb_cmd_write_attr_resp_handler(): Write attribute response: status(0), cluster(0x0), attribute(0xffff)
[ 39047][I][ZigbeeGateway.cpp:262] zbPrintDeviceDiscovery(): short_addr_req 46018
[ 39255][I][ZigbeeGateway.cpp:196] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 46018, endpoints count 1
[ 39256][I][ZigbeeGateway.cpp:199] Z2S_active_ep_req_cb(): Endpont # 1, id 1
[ 39375][I][ZigbeeGateway.cpp:215] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 46018, endpoint # 1
[ 39376][I][ZigbeeGateway.cpp:216] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 5, out clusters # 2
[ 39376][I][ZigbeeGateway.cpp:220] Z2S_simple_desc_req_cb(): In cluster # 1, id 4
[ 39377][I][ZigbeeGateway.cpp:220] Z2S_simple_desc_req_cb(): In cluster # 2, id 5
[ 39377][I][ZigbeeGateway.cpp:220] Z2S_simple_desc_req_cb(): In cluster # 3, id 61184
[ 39378][I][ZigbeeGateway.cpp:220] Z2S_simple_desc_req_cb(): In cluster # 4, id 0
[ 39378][I][ZigbeeGateway.cpp:220] Z2S_simple_desc_req_cb(): In cluster # 5, id 60672
[ 39379][I][ZigbeeGateway.cpp:235] Z2S_simple_desc_req_cb(): Out cluster # 1, id 25
[ 39379][I][ZigbeeGateway.cpp:235] Z2S_simple_desc_req_cb(): Out cluster # 2, id 10
[ 39500][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 39500][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xb3c2), src_endpoint(1) to dst_endpoint(1), cluster(0x4) for command (0xc) with status 0x84
[ 39501][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 39515][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 39516][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xb3c2), src_endpoint(1) to dst_endpoint(1), cluster(0x5) for command (0xc) with status 0x84
[ 39516][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 39530][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 39530][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xb3c2), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0xc) with status 0x84
[ 39531][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 39545][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 39545][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xb3c2), src_endpoint(1) to dst_endpoint(1), cluster(0x0) for command (0xc) with status 0x84
[ 39546][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 39560][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 39560][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xb3c2), src_endpoint(1) to dst_endpoint(1), cluster(0xed00) for command (0xc) with status 0x84
[ 39561][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 39575][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0x19, command id: 11
[ 39575][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39576][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39576][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39577][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 16 size: 2
[ 39577][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x0C
[ 39577][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x84
[ 39578][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb3c2, 0xb3c2, 0x0, 0x0
[ 39578][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[ 39582][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 39582][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xb3c2), src_endpoint(1) to dst_endpoint(1), cluster(0xa) for command (0xc) with status 0x84
[ 39583][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 40024][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 40024][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 40025][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 64
[ 40025][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 40026][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0xd
[ 40026][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x2
[ 40027][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x4
[ 40027][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 40027][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[ 40028][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x2
[ 40028][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x4
[ 40029][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x2
[ 40029][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x0
[ 40030][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x4
[ 40030][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x0
[ 40030][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x0
[ 40031][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x0
[ 40031][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0xd2
[ 40032][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x15
[ 40032][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x2
[ 40033][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x0
[ 40033][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0x4
[ 40033][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x0
[ 40034][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0x0
[ 40034][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x0
[ 40035][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0x32
[ 40035][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x5
[ 40036][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x18] = 0x2
[ 40036][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x19] = 0x0
[ 40037][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1a] = 0x4
[ 40037][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1b] = 0x0
[ 40037][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1c] = 0x0
[ 40038][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1d] = 0x0
[ 40038][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1e] = 0xdc
[ 40039][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1f] = 0x6
[ 40039][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x20] = 0x2
[ 40040][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x21] = 0x0
[ 40040][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x22] = 0x4
[ 40041][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x23] = 0x0
[ 40041][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x24] = 0x0
[ 40041][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x25] = 0x0
[ 40042][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x26] = 0x64
[ 40042][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x27] = 0x7
[ 40043][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x28] = 0x1
[ 40043][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x29] = 0x0
[ 40044][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2a] = 0x1
[ 40044][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2b] = 0x0
[ 40044][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2c] = 0xe
[ 40045][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2d] = 0x1
[ 40045][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2e] = 0x0
[ 40046][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2f] = 0x1
[ 40046][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x30] = 0x0
[ 40047][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x31] = 0xf
[ 40047][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x32] = 0x4
[ 40048][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x33] = 0x0
[ 40048][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x34] = 0x1
[ 40049][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x35] = 0x0
[ 40049][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x36] = 0x24
[ 40050][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x37] = 0x1
[ 40050][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x38] = 0x0
[ 40050][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x39] = 0x1
[ 40051][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3a] = 0x0
[ 40051][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3b] = 0x27
[ 40052][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3c] = 0x1
[ 40052][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3d] = 0x0
[ 40053][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3e] = 0x1
[ 40053][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3f] = 0x1
[ 40323][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 40324][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 40324][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 61
[ 40325][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 40325][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0xe
[ 40325][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x27
[ 40326][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x1
[ 40326][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 40327][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[ 40327][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x1
[ 40327][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x65
[ 40328][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x1
[ 40328][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x0
[ 40329][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x1
[ 40329][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x0
[ 40329][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x66
[ 40330][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x4
[ 40330][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x0
[ 40331][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x1
[ 40331][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x0
[ 40331][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x6f
[ 40332][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0x4
[ 40332][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x0
[ 40333][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0x1
[ 40333][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x1
[ 40334][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0x70
[ 40334][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x2
[ 40335][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x18] = 0x0
[ 40335][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x19] = 0x4
[ 40335][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1a] = 0x0
[ 40336][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1b] = 0x0
[ 40336][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1c] = 0x0
[ 40337][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1d] = 0x32
[ 40337][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1e] = 0x71
[ 40338][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1f] = 0x1
[ 40338][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x20] = 0x0
[ 40338][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x21] = 0x1
[ 40339][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x22] = 0x0
[ 40339][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x23] = 0x73
[ 40340][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x24] = 0x4
[ 40340][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x25] = 0x0
[ 40341][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x26] = 0x1
[ 40341][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x27] = 0x0
[ 40342][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x28] = 0x74
[ 40342][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x29] = 0x2
[ 40342][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2a] = 0x0
[ 40343][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2b] = 0x4
[ 40343][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2c] = 0x0
[ 40344][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2d] = 0x0
[ 40344][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2e] = 0x0
[ 40345][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2f] = 0xc8
[ 40345][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x30] = 0x75
[ 40345][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x31] = 0x2
[ 40346][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x32] = 0x0
[ 40346][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x33] = 0x4
[ 40347][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x34] = 0x0
[ 40347][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x35] = 0x0
[ 40348][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x36] = 0x0
[ 40348][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x37] = 0xd2
[ 40349][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x38] = 0x76
[ 40349][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x39] = 0x4
[ 40350][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3a] = 0x0
[ 40350][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3b] = 0x1
[ 40351][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3c] = 0x0
[ 40605][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 40606][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 40606][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 24
[ 40607][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 40607][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0xf
[ 40607][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x67
[ 40608][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 40608][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 40609][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x12
[ 40609][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x7
[ 40610][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x10
[ 40610][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x3f
[ 40611][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x2a
[ 40611][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x53
[ 40611][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x14
[ 40612][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x64
[ 40612][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x14
[ 40613][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x78
[ 40613][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x14
[ 40614][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x8c
[ 40614][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x14
[ 40614][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0xa0
[ 40615][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x14
[ 40615][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0xad
[ 40616][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x2a
[ 40616][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0xdc
[ 40617][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x14
[ 40856][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 40857][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 40857][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 24
[ 40857][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 40858][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x10
[ 40858][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x68
[ 40859][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 40859][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 40860][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x12
[ 40860][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x7
[ 40860][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x10
[ 40861][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x3f
[ 40861][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x2a
[ 40862][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x53
[ 40862][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x14
[ 40863][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x64
[ 40863][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x14
[ 40863][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x78
[ 40864][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x14
[ 40864][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x8c
[ 40865][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x14
[ 40865][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0xa0
[ 40865][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x14
[ 40866][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0xad
[ 40866][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x2a
[ 40867][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0xdc
[ 40867][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x14
[ 41108][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 41108][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 41109][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 24
[ 41109][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 41110][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x11
[ 41110][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x69
[ 41110][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 41111][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 41111][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x12
[ 41112][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x7
[ 41112][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x10
[ 41112][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x3f
[ 41113][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x2a
[ 41113][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x53
[ 41114][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x14
[ 41114][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x64
[ 41114][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x14
[ 41115][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x78
[ 41115][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x14
[ 41116][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x8c
[ 41116][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x14
[ 41117][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0xa0
[ 41117][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x14
[ 41117][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0xad
[ 41118][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x2a
[ 41118][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0xdc
[ 41119][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x14
[ 41251][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 41251][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 41252][I][ZigbeeGateway.cpp:652] zbAttributeReporting(): zbAttributeReporting from (0xb069), endpoint (1), cluster (0x0), attribute id (0xffcf), attribute data type (0x21)
[ 41376][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 41377][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 17 from address 0xb3c2
[ 41377][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 3
[ 41378][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x1
[ 41378][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x12
[ 41379][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x49
[ 41500][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 41500][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 41501][I][ZigbeeGateway.cpp:652] zbAttributeReporting(): zbAttributeReporting from (0xb069), endpoint (1), cluster (0x0), attribute id (0x1), attribute data type (0x20)
[ 41502][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 41502][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 41503][I][ZigbeeGateway.cpp:652] zbAttributeReporting(): zbAttributeReporting from (0xb069), endpoint (1), cluster (0x0), attribute id (0xffe2), attribute data type (0x20)
[ 41503][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 41504][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 41504][I][ZigbeeGateway.cpp:652] zbAttributeReporting(): zbAttributeReporting from (0xb069), endpoint (1), cluster (0x0), attribute id (0xffe4), attribute data type (0x20)
[ 41625][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 41625][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 41626][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 24
[ 41626][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 41626][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x12
[ 41627][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x6a
[ 41627][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 41628][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 41628][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x12
[ 41629][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x7
[ 41629][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x10
[ 41629][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x3f
[ 41630][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x2a
[ 41630][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x53
[ 41630][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x14
[ 41631][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x64
[ 41631][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x14
[ 41632][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x78
[ 41632][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x14
[ 41633][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x8c
[ 41633][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x14
[ 41633][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0xa0
[ 41634][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x14
[ 41634][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0xad
[ 41635][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x2a
[ 41635][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0xdc
[ 41636][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x14
[ 41747][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[ 41747][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 41748][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[ 41748][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[ 41749][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 18 size: 2
[ 41749][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07
[ 41749][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00
[ 41750][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb3c2, 0xb3c2, 0x0, 0x0
[ 41750][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[ 41874][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 41875][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 41875][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 24
[ 41876][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 41876][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x13
[ 41876][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x6b
[ 41877][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 41877][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 41878][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x12
[ 41878][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x7
[ 41879][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x10
[ 41879][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x3f
[ 41879][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x2a
[ 41880][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x53
[ 41880][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x14
[ 41881][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x64
[ 41881][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x14
[ 41881][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x78
[ 41882][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x14
[ 41882][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x8c
[ 41883][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x14
[ 41883][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0xa0
[ 41883][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x14
[ 41884][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0xad
[ 41884][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x2a
[ 41885][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0xdc
[ 41885][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x14
[ 41997][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 41997][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xb3c2) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 41998][I][ZigbeeGateway.cpp:652] zbAttributeReporting(): zbAttributeReporting from (0xb069), endpoint (1), cluster (0x0), attribute id (0xffdf), attribute data type (0x42)
[ 42129][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 42129][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 42130][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 24
[ 42130][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 42131][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x14
[ 42131][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x6c
[ 42131][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 42132][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 42132][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x12
[ 42133][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x7
[ 42133][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x10
[ 42133][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x49
[ 42134][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x2a
[ 42134][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x50
[ 42135][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x2a
[ 42135][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x64
[ 42136][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x14
[ 42136][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x78
[ 42136][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x14
[ 42137][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x8c
[ 42137][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x14
[ 42138][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0xa0
[ 42138][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x14
[ 42139][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0xad
[ 42139][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x2a
[ 42139][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0xe6
[ 42140][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x14
[ 42252][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 42253][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 42253][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 24
[ 42254][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 42254][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x15
[ 42255][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x6d
[ 42255][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 42255][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 42256][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x12
[ 42256][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x7
[ 42257][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x10
[ 42257][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x49
[ 42258][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x2a
[ 42258][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x50
[ 42259][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x2a
[ 42259][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x64
[ 42259][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x14
[ 42260][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xe] = 0x78
[ 42260][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xf] = 0x14
[ 42261][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x10] = 0x8c
[ 42261][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x11] = 0x14
[ 42262][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x12] = 0xa0
[ 42262][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x13] = 0x14
[ 42262][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x14] = 0xad
[ 42263][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x15] = 0x2a
[ 42263][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x16] = 0xe6
[ 42264][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x17] = 0x14
[ 42375][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 42376][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 42376][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 14
[ 42377][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 42377][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x16
[ 42377][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x6e
[ 42378][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x0
[ 42378][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 42379][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x8
[ 42379][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x63
[ 42380][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0xb0
[ 42380][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x5c
[ 42380][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x80
[ 42381][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xa] = 0x67
[ 42381][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xb] = 0x74
[ 42382][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xc] = 0x15
[ 42382][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0xd] = 0x0
[ 42618][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 42618][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xb3c2
[ 42619][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 10
[ 42620][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[ 42620][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x17
[ 42620][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x72
[ 42621][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x2
[ 42621][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[ 42622][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x4
[ 42622][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[ 42622][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x0
[ 42623][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x0
[ 42623][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x0
[ 42867][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[ 42867][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 37 from address 0xb3c2
[ 42868][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[ 42868][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x18
[ 42869][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x0
Widok w aplikacji Tuya:

Screenshot_20250228_102500_Tuya Smart.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by Yepestis on Tue Mar 04, 2025 8:58 pm, edited 1 time in total.
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

Proszę o dodanie głowicy termostatycznej Sonoff (Thermostatic Radiator Valve)
https://www.zigbee2mqtt.io/devices/TRVZ ... noff-trvzb

Code: Select all

20:42:07.261 -> [  2307][I][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Network(0xca17) is open for 180 seconds
20:42:45.514 -> [ 40551][V][ZigbeeCore.cpp:400] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
20:42:45.514 -> [ 40553][V][ZigbeeCore.cpp:400] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
20:42:47.497 -> [ 42567][V][ZigbeeCore.cpp:400] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
20:42:47.544 -> [ 42569][V][ZigbeeCore.cpp:400] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
20:42:47.639 -> [ 42619][I][ZigbeeCore.cpp:353] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xa6d2)
20:42:47.639 -> [ 42620][V][ZigbeeCore.cpp:357] esp_zb_app_signal_handler(): Device capabilities: 0x80
20:42:47.639 -> [ 42620][D][ZigbeeGateway.cpp:467] zbDeviceAnnce(): zbDeviceAnnce short address (0xa6d2), ieee_addr (0x8):(0xdd):(0xeb):(0xff):(0xfe):(0xf7):(0x62):(0x4f)
20:42:47.639 -> [ 42621][D][ZigbeeGateway.cpp:470] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0xa6d2), ieee_addr (0x8):(0xdd):(0xeb):(0xff):(0xfe):(0xf7):(0x62):(0x4f)
20:42:47.639 -> [ 42622][I][ZigbeeGateway.cpp:504] zbDeviceAnnce(): Tuya magic last hope
20:42:47.810 -> [ 42873][I][ZigbeeGateway.cpp:539] printJoinedDevices(): joined devices:
20:42:47.810 -> [ 42873][I][ZigbeeGateway.cpp:542] printJoinedDevices(): Device on endpoint 1, short address: 0xa6d2
20:42:47.903 -> [ 42944][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:47.903 -> [ 42945][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:47.903 -> [ 42946][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(6)
20:42:47.903 -> [ 42947][I][ZigbeeGateway.cpp:338] zbReadBasicCluster(): Peer Manufacturer is "SONOFF"
20:42:47.903 -> [ 42947][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(8)
20:42:47.903 -> [ 42948][I][ZigbeeGateway.cpp:351] zbReadBasicCluster(): ZCL version id is "8"
20:42:47.903 -> [ 42948][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(0)
20:42:47.903 -> [ 42949][I][ZigbeeGateway.cpp:357] zbReadBasicCluster(): ZCL application version id is "0"
20:42:47.903 -> [ 42949][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(5)
20:42:47.904 -> [ 42950][I][ZigbeeGateway.cpp:345] zbReadBasicCluster(): Peer Model is "TRVZB"
20:42:47.904 -> [ 42950][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(3)
20:42:47.904 -> [ 42951][I][ZigbeeGateway.cpp:363] zbReadBasicCluster(): ZCL power source id is "3"
20:42:47.904 -> [ 42951][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(134), cluster(0x0), attribute(0xfffe), type(0x0), value(0)
20:42:47.904 -> [ 42955][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1005) callback
20:42:47.904 -> [ 42956][V][ZigbeeHandlers.cpp:271] zb_cmd_default_resp_handler(): Received default response: from address(0xa6d2), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0xc3
20:42:47.904 -> [ 42957][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
20:42:47.904 -> [ 42957][I][ZigbeeGateway.cpp:1257] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1[0x0]
20:42:48.215 -> [ 43274][I][ZigbeeGateway.cpp:305] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x0
20:42:48.497 -> [ 43527][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:48.497 -> [ 43527][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:48.497 -> [ 43528][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(8)
20:42:48.497 -> [ 43529][I][ZigbeeGateway.cpp:351] zbReadBasicCluster(): ZCL version id is "8"
20:42:48.732 -> [ 43775][I][ZigbeeGateway.cpp:311] zbQueryDeviceBasicCluster(): basic tsn 0x2
20:42:48.732 -> [ 43775][I][ZigbeeGateway.cpp:305] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
20:42:48.811 -> [ 43838][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:48.811 -> [ 43838][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:48.811 -> [ 43839][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(6)
20:42:48.811 -> [ 43839][I][ZigbeeGateway.cpp:338] zbReadBasicCluster(): Peer Manufacturer is "SONOFF"
20:42:49.232 -> [ 44276][I][ZigbeeGateway.cpp:311] zbQueryDeviceBasicCluster(): basic tsn 0x3
20:42:49.232 -> [ 44276][I][ZigbeeGateway.cpp:305] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x0
20:42:49.745 -> [ 44777][I][ZigbeeGateway.cpp:311] zbQueryDeviceBasicCluster(): basic tsn 0x4
20:42:51.508 -> [ 46542][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:51.508 -> [ 46543][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(8)
20:42:51.508 -> [ 46544][I][ZigbeeGateway.cpp:351] zbReadBasicCluster(): ZCL version id is "8"
20:42:51.508 -> [ 46545][I][ZigbeeGateway.cpp:305] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x1
20:42:51.835 -> [ 46865][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:51.835 -> [ 46866][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:51.835 -> [ 46867][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(0)
20:42:51.835 -> [ 46867][I][ZigbeeGateway.cpp:357] zbReadBasicCluster(): ZCL application version id is "0"
20:42:52.022 -> [ 47045][I][ZigbeeGateway.cpp:311] zbQueryDeviceBasicCluster(): basic tsn 0x5
20:42:52.022 -> [ 47045][I][ZigbeeGateway.cpp:305] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
20:42:52.114 -> [ 47143][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:52.114 -> [ 47144][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:52.114 -> [ 47145][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(5)
20:42:52.114 -> [ 47145][I][ZigbeeGateway.cpp:345] zbReadBasicCluster(): Peer Model is "TRVZB"
20:42:52.477 -> [ 47546][I][ZigbeeGateway.cpp:311] zbQueryDeviceBasicCluster(): basic tsn 0x6
20:42:52.477 -> [ 47546][I][ZigbeeGateway.cpp:305] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x7
20:42:52.660 -> [ 47728][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:52.660 -> [ 47728][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:52.660 -> [ 47729][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(3)
20:42:52.660 -> [ 47729][I][ZigbeeGateway.cpp:363] zbReadBasicCluster(): ZCL power source id is "3"
20:42:53.021 -> [ 48047][I][ZigbeeGateway.cpp:311] zbQueryDeviceBasicCluster(): basic tsn 0x7
20:42:53.021 -> [ 48047][I][ZigbeeGateway.cpp:322] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0xfffe
20:42:53.300 -> [ 48328][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:53.300 -> [ 48328][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:53.300 -> [ 48329][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(134), cluster(0x0), attribute(0xfffe), type(0x0), value(0)
20:42:53.479 -> [ 48548][I][ZigbeeGateway.cpp:952] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
20:42:53.612 -> [ 48637][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1001) callback
20:42:53.612 -> [ 48637][V][ZigbeeHandlers.cpp:187] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:53.612 -> [ 48638][V][ZigbeeHandlers.cpp:194] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0x0), attribute(0xffde)
20:42:53.978 -> [ 49048][I][ZigbeeGateway.cpp:270] zbPrintDeviceDiscovery(): short_addr_req 42706
20:42:54.201 -> [ 49229][I][ZigbeeGateway.cpp:204] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 42706, endpoints count 1
20:42:54.201 -> [ 49230][I][ZigbeeGateway.cpp:207] Z2S_active_ep_req_cb(): Endpont # 1, id 1 
20:42:54.470 -> [ 49539][I][ZigbeeGateway.cpp:223] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 42706, endpoint # 1
20:42:54.470 -> [ 49539][I][ZigbeeGateway.cpp:224] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 8, out clusters # 2
20:42:54.515 -> [ 49540][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 1, id 0 
20:42:54.515 -> [ 49541][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 2, id 1 
20:42:54.515 -> [ 49541][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 3, id 3 
20:42:54.515 -> [ 49541][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 4, id 6 
20:42:54.515 -> [ 49542][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 5, id 32 
20:42:54.515 -> [ 49542][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 6, id 513 
20:42:54.515 -> [ 49543][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 7, id 64599 
20:42:54.515 -> [ 49543][I][ZigbeeGateway.cpp:228] Z2S_simple_desc_req_cb(): In cluster # 8, id 64529 
20:42:54.515 -> [ 49544][I][ZigbeeGateway.cpp:243] Z2S_simple_desc_req_cb(): Out cluster # 1, id 10 
20:42:54.515 -> [ 49544][I][ZigbeeGateway.cpp:243] Z2S_simple_desc_req_cb(): Out cluster # 2, id 25 
20:42:55.305 -> [ 50357][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:55.305 -> [ 50375][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:55.482 -> [ 50520][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:55.482 -> [ 50532][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:55.655 -> [ 50714][I][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Network(0xca17) is open for 180 seconds
20:42:56.902 -> [ 51933][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:57.170 -> [ 52239][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:57.919 -> [ 52948][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:58.012 -> [ 53049][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:58.434 -> [ 53475][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:58.982 -> [ 54033][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:42:59.529 -> [ 54596][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1000) callback
20:42:59.529 -> [ 54597][V][ZigbeeHandlers.cpp:151] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x0)
20:42:59.529 -> [ 54598][V][ZigbeeHandlers.cpp:160] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(8)
20:42:59.529 -> [ 54598][I][ZigbeeGateway.cpp:351] zbReadBasicCluster(): ZCL version id is "8"
20:42:59.950 -> [ 55020][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:00.229 -> [ 55275][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:00.602 -> [ 55647][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:00.730 -> [ 55791][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:00.730 -> [ 55795][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
20:43:00.730 -> [ 55796][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
20:43:00.730 -> [ 55796][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
20:43:00.730 -> [ 55797][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
20:43:00.730 -> [ 55797][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 31 size: 4
20:43:00.730 -> [ 55797][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00 
20:43:00.730 -> [ 55798][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00 
20:43:00.730 -> [ 55798][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07 
20:43:00.730 -> [ 55798][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00 
20:43:00.730 -> [ 55799][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xa6d2, 0xa6d2, 0x0, 0x0
20:43:00.730 -> [ 55799][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
20:43:02.697 -> [ 57759][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:02.697 -> [ 57760][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x201)
20:43:02.697 -> [ 57761][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x201), attribute id (0x1c), attribute data type (0x30) 
20:43:02.697 -> [ 57761][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:02.697 -> [ 57762][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x201)
20:43:02.697 -> [ 57763][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x201), attribute id (0x0), attribute data type (0x29) 
20:43:02.697 -> [ 57763][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:02.697 -> [ 57764][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x201)
20:43:02.697 -> [ 57765][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x201), attribute id (0x12), attribute data type (0x29) 
20:43:02.697 -> [ 57765][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:02.697 -> [ 57766][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x201)
20:43:02.697 -> [ 57766][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x201), attribute id (0x29), attribute data type (0x19) 
20:43:04.970 -> [ 60037][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.182 -> [ 60155][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.354 -> [ 60396][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.522 -> [ 60588][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.569 -> [ 60605][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.569 -> [ 60620][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.653 -> [ 60707][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.653 -> [ 60723][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.694 -> [ 60729][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:05.769 -> [ 60819][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:05.769 -> [ 60820][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:05.769 -> [ 60821][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6007), attribute data type (0x21) 
20:43:05.769 -> [ 60822][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:05.769 -> [ 60822][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:05.769 -> [ 60823][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6008), attribute data type (0x20) 
20:43:05.769 -> [ 60823][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:05.769 -> [ 60824][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:05.769 -> [ 60825][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x600b), attribute data type (0x20) 
20:43:05.769 -> [ 60825][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:05.769 -> [ 60826][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:05.769 -> [ 60826][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x600c), attribute data type (0x20) 
20:43:05.769 -> [ 60827][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:05.769 -> [ 60828][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:05.769 -> [ 60828][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x600e), attribute data type (0x20) 
20:43:06.714 -> [ 61771][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:06.714 -> [ 61778][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:06.714 -> [ 61779][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x6)
20:43:06.714 -> [ 61780][I][ZigbeeGateway.cpp:599] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x0), attribute data type (0x30)
20:43:06.714 -> [ 61780][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x6), attribute id (0x0), attribute data type (0x30) 
20:43:06.991 -> [ 62020][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:07.958 -> [ 63013][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:07.958 -> [ 63014][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:07.959 -> [ 63014][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6002), attribute data type (0x29) 
20:43:07.959 -> [ 63015][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:07.959 -> [ 63016][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:07.959 -> [ 63017][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6009), attribute data type (0x29) 
20:43:07.959 -> [ 63017][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:07.959 -> [ 63018][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:07.959 -> [ 63018][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6000), attribute data type (0x10) 
20:43:07.959 -> [ 63019][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:07.959 -> [ 63020][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:07.959 -> [ 63020][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x0), attribute data type (0x10) 
20:43:07.959 -> [ 63021][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:07.959 -> [ 63021][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:07.959 -> [ 63022][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x10), attribute data type (0x23) 
20:43:07.959 -> [ 63026][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:08.338 -> [ 63359][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:08.803 -> [ 63827][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:08.803 -> [ 63827][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x1)
20:43:08.803 -> [ 63828][I][ZigbeeGateway.cpp:664] zbAttributeReporting(): zbAttributeReporting power config battery percentage remaining 200
20:43:08.803 -> [ 63828][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x1), attribute id (0x21), attribute data type (0x20) 
20:43:08.803 -> [ 63834][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:09.193 -> [ 64264][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:09.549 -> [ 64595][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:09.736 -> [ 64788][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:09.736 -> [ 64789][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:09.736 -> [ 64790][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6001), attribute data type (0x29) 
20:43:09.736 -> [ 64790][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:09.736 -> [ 64791][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:09.736 -> [ 64792][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6003), attribute data type (0x21) 
20:43:09.736 -> [ 64792][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:09.736 -> [ 64793][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:09.736 -> [ 64793][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6004), attribute data type (0x21) 
20:43:09.736 -> [ 64794][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:09.736 -> [ 64795][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:09.736 -> [ 64795][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6005), attribute data type (0x21) 
20:43:09.736 -> [ 64796][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:09.736 -> [ 64797][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:09.736 -> [ 64797][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x6006), attribute data type (0x21) 
20:43:09.876 -> [ 64928][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:10.111 -> [ 65153][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:10.381 -> [ 65451][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:10.698 -> [ 65766][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:43:10.698 -> [ 65767][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0xfc11)
20:43:10.698 -> [ 65768][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0xfc11), attribute id (0x600d), attribute data type (0x29) 
20:43:11.699 -> [ 66769][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1070) callback
20:43:11.699 -> [ 66769][W][ZigbeeHandlers.cpp:49] zb_action_handler(): Receive unhandled Zigbee action(0x1070) callback
20:43:12.732 -> [ 67770][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1070) callback
20:43:12.732 -> [ 67770][W][ZigbeeHandlers.cpp:49] zb_action_handler(): Receive unhandled Zigbee action(0x1070) callback
20:43:13.702 -> [ 68772][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1070) callback
20:43:13.743 -> [ 68772][W][ZigbeeHandlers.cpp:49] zb_action_handler(): Receive unhandled Zigbee action(0x1070) callback
20:43:15.272 -> [ 70321][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:15.411 -> [ 70437][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:15.411 -> [ 70463][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:15.457 -> [ 70492][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:15.457 -> [ 70506][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:15.457 -> [ 70528][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:15.523 -> [ 70594][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:15.703 -> [ 70773][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1070) callback
20:43:15.703 -> [ 70773][W][ZigbeeHandlers.cpp:49] zb_action_handler(): Receive unhandled Zigbee action(0x1070) callback
20:43:16.438 -> [ 71509][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:16.714 -> [ 71784][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1070) callback
20:43:16.750 -> [ 71785][W][ZigbeeHandlers.cpp:49] zb_action_handler(): Receive unhandled Zigbee action(0x1070) callback
20:43:17.047 -> [ 72118][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:17.315 -> [ 72360][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:17.707 -> [ 72778][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:17.750 -> [ 72785][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1070) callback
20:43:17.750 -> [ 72786][W][ZigbeeHandlers.cpp:49] zb_action_handler(): Receive unhandled Zigbee action(0x1070) callback
20:43:18.204 -> [ 73255][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:18.518 -> [ 73560][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:24.962 -> [ 80032][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:25.051 -> [ 80050][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:25.051 -> [ 80062][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:25.051 -> [ 80075][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:25.054 -> [ 80086][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:43:25.054 -> [ 80098][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1004) callback
20:45:55.640 -> [230715][I][ZigbeeCore.cpp:386] esp_zb_app_signal_handler(): Network(0xca17) closed, devices joining not allowed.
20:52:32.423 -> [627480][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:52:32.423 -> [627481][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x201)
20:52:32.423 -> [627482][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x201), attribute id (0x0), attribute data type (0x29) 
20:59:05.253 -> [1020327][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x2000) callback
20:59:05.253 -> [1020328][V][ZigbeeHandlers.cpp:129] zb_attribute_reporting_handler(): Received report from address(0xa6d2) src endpoint(1) to dst endpoint(1) cluster(0x201)
20:59:05.253 -> [1020329][I][ZigbeeGateway.cpp:676] zbAttributeReporting(): zbAttributeReporting from (0x624f), endpoint (1), cluster (0x201), attribute id (0x0), attribute data type (0x29)
Top
nebraska
Posts: 204
Joined: Thu Dec 08, 2022 3:00 pm
Been thanked: 1 time

Post

Czy mógłby ktoś mi wytłumaczyć jak działają głowice, ponieważ nie bawiłem się jeszcze. Kupiłem głowicę TRV06 głowica się ładnie sparowała z Supla.
Kręcac pokrętłem słysze jak mechanizm pracuje. Jak to ma się do Supli? Rozumiem że muszę najpierw ją zamontować ?
Gdy zmieniam temp na głowicy to w supli nic sie nie dzieje.
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

nebraska wrote: Thu Mar 06, 2025 8:32 pm Czy mógłby ktoś mi wytłumaczyć jak działają głowice, ponieważ nie bawiłem się jeszcze. Kupiłem głowicę TRV06 głowica się ładnie sparowała z Supla.
Kręcac pokrętłem słysze jak mechanizm pracuje. Jak to ma się do Supli? Rozumiem że muszę najpierw ją zamontować ?
Gdy zmieniam temp na głowicy to w supli nic sie nie dzieje.
Głowice termostatyczne są w fazie bardzo wstępnych testów. Wyjeżdżam teraz na tydzień, jak wrócę udostępnię specjalne narzędzie do testowania - montaż raczej w kolejnym sezonie grzewczym ;)
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
nebraska
Posts: 204
Joined: Thu Dec 08, 2022 3:00 pm
Been thanked: 1 time

Post

oki, dziękuje za info teraz wszystko jasne.
Top
lukasz06
Posts: 2543
Joined: Sun Jul 17, 2022 6:53 pm
Has thanked: 46 times
Been thanked: 21 times

Post

A ten Sonoff jest w bazie?
Top

Return to “Bramka ZigBee”