Zgłoszenia nowych urządzeń [bramka Zigbee]

[rysieks]

Zigbee Switch Module Mini-Z1-4CH Test v0.5.11
Po zmianie w SmartLife działania wejść jako monostabilne
rejestracja w Bramce-Supla - przyciski fizyczne działają zgodnie z oczekiwaniem (monostabilne)
i stany kanałów przekazywane są do Apki.
natomiast sterowanie z Apki
- załączenie kanału powoduje załączenie wszystkich kanałów
- wyłączenie kanału powoduje wyłączenie wszystkich kanałów

ps. Ok trochę poszperałem, na Z2S_DEVICE_DESC_RELAY wszystko chodzi poprawnie.

[vajera]

@rysieks - zobacz wersję 0.5.12 - wymaga ponownego sparowania czujnika z bramką.

viewtopic.php?p=200376#p200376

[rysieks]

@rysieks - zobacz wersję 0.5.12 - wymaga ponownego sparowania czujnika z bramką.

viewtopic.php?p=200376#p200376

v 0.5.12 Test Mini-Z1-4CH, wgrany merged
sterowanie z Apki;
- załączenie kanału powoduje załączenie wszystkich kanałów
- wyłączenie kanału powoduje wyłączenie wszystkich kanałów
Po ponownej rejestracji - bez zmian.

v 0.5.13 Test Mini-Z1-4CH, wgrany 0x10000
tak jak wyżej.
załączenie kanału z Apki powoduje taką srię załaczania 4 przekaźników (klik,klik,klik,klik)
Po ponwnej rejestracji - bez zmian.

p.s. Takie samo zachowanie dotyczy urządzenia ZG-005-RF

[voytekf]

dobra długo nie wiedziałem jak pobrać te logi ale już wiem prośba o dodanie czujnika temperatury i wilgotności xiaomi (bez wyświetlacza)

Code: Select all

[328934][D][Z2S_Gateway.ino:656] loop(): Unknown model LUMI::lumi.sens, no binding is possible

jest to coś takiego

https://www.zigbee2mqtt.io/devices/WSDCGQ01LM.html

Dzięki

[vajera]

Board rev.: 0.5.0-06/03/2025
Logi i dalej nie ma reakcji na kropki.

Naniosłem kolejne zmiany - będą w 0.5.3, która się właśnie buduje. Tylko, że te zmiany nie zadziałają bez ponownego bindowania urządzenia i tutaj masz 3 opcje:

1. wgrać plik merged na jakiś testowy moduł C6 i zobaczyć czy działa,
2. reset stosu Zigbee - niestety usunie wszystkie sparowane z bramką urządzenia,
3. wersja 0.5.3 wprowadza również nową opcję:
   1. włączasz tryb parowania w bramce (1x BOOT),
   2. wprowadzasz sparowane wcześniej urządzenie ponownie w tryb parowania - ono opuści sieć bramki i natychmiast zgłosi się do niej ponownie przechodząc od nowa konfigurację i bindingi, ale nie utworzy to nowych kanałów Supla - stare będą nadal aktywne.

Wgrałem merged od zera bo mam jedna testowa bramke pod beta-cloud. Niestety kropki bez zmian

Logi po wciskaniu kropek:

Code: Select all

[07:37:01][445083][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[07:37:01][445083][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 1 from address 0x6e5b
[07:37:01][445084][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[07:37:01][445084][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x1
[07:37:01][445084][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x1
[07:37:01][445085][I][z2s_devices_table.cpp:715] Z2S_onCmdCustomClusterReceive(): IKEA custom cluster(0xfc7f) on endpoint(0x1), command(0x1)
[07:37:01][445086][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0xfc7f), command id(0x1), 
[07:37:03][447595][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[07:37:03][447595][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 1 from address 0x6e5b
[07:37:03][447596][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[07:37:03][447596][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x1
[07:37:03][447596][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2
[07:37:03][447597][I][z2s_devices_table.cpp:715] Z2S_onCmdCustomClusterReceive(): IKEA custom cluster(0xfc7f) on endpoint(0x1), command(0x1)
[07:37:03][447598][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0xfc7f), command id(0x1), 
[07:37:05][449706][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[07:37:05][449707][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 1 from address 0x6e5b
[07:37:05][449707][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[07:37:05][449708][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x2
[07:37:05][449708][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2
[07:37:05][449709][I][z2s_devices_table.cpp:715] Z2S_onCmdCustomClusterReceive(): IKEA custom cluster(0xfc7f) on endpoint(0x1), command(0x1)
[07:37:05][449709][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0xfc7f), command id(0x1), 
[07:37:06][450558][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[07:37:06][450559][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 1 from address 0x6e5b
[07:37:06][450559][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[07:37:06][450560][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x2
[07:37:06][450560][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x1
[07:37:06][450561][I][z2s_devices_table.cpp:715] Z2S_onCmdCustomClusterReceive(): IKEA custom cluster(0xfc7f) on endpoint(0x1), command(0x1)
[07:37:06][450562][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0xfc7f), command id(0x1), 
[07:37:08][452433][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[07:37:08][452433][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 1 from address 0x6e5b
[07:37:08][452434][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[07:37:08][452434][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x2
[07:37:08][452435][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x3
[07:37:08][452435][I][z2s_devices_table.cpp:715] Z2S_onCmdCustomClusterReceive(): IKEA custom cluster(0xfc7f) on endpoint(0x1), command(0x1)
[07:37:08][452436][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0xfc7f), command id(0x1), 
[07:37:10][454157][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[07:37:10][454157][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 1 from address 0x6e5b
[07:37:10][454158][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[07:37:10][454158][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x1
[07:37:10][454159][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x1
[07:37:10][454159][I][z2s_devices_table.cpp:715] Z2S_onCmdCustomClusterReceive(): IKEA custom cluster(0xfc7f) on endpoint(0x1), command(0x1)
[07:37:10][454160][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0xfc7f), command id(0x1), 

1xBOOT i ponowne parowanie. Niestety nie udało mi się ponownie sparować tą metodą. Jakiś op[orny ten IKEŁOWY przycisk:

Code: Select all

[07:39:32][595775][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0x4, command id: 4
[07:39:32][595775][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[07:39:32][595776][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 0, disable_default_response 1, is_manuf_specific 0
[07:39:32][595776][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[07:39:32][595776][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 3 size: 0
[07:39:32][595777][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x6e5b, 0x6e5b, 0x0, 0x0
[07:39:32][595777][I][z2s_devices_table.cpp:614] Z2S_onCustomCmdReceive(): Z2S_onCustomCmdReceive cluster 0x4, command id 0x4, rssi: -64
[07:39:32][595778][I][z2s_devices_table.cpp:78] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0x94:0xde:0xb8:0xff:0xfe:0x6a:0x6e:0xc8, endpoint 0x1, channel type 0xffffffff
[07:39:32][595779][I][z2s_devices_table.cpp:623] Z2S_onCustomCmdReceive(): z2s_devices_table[channel_number_slot].Supla_channel 0x0
[07:39:32][595779][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0x4), command id(0x4), 
[07:39:32][595780][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[07:39:33][596836][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0x4, command id: 0
[07:39:33][596836][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[07:39:33][596836][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 0, disable_default_response 1, is_manuf_specific 0
[07:39:33][596837][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[07:39:33][596837][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 5 size: 10
[07:39:33][596838][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x05 
[07:39:33][596838][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0xE8 
[07:39:33][596839][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x07 
[07:39:33][596839][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x64 
[07:39:33][596839][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x65 
[07:39:33][596840][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x66 
[07:39:33][596840][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x61 
[07:39:33][596840][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x75 
[07:39:33][596841][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x6C 
[07:39:33][596841][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x74 
[07:39:33][596841][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x6e5b, 0x6e5b, 0x0, 0x0
[07:39:33][596842][I][z2s_devices_table.cpp:614] Z2S_onCustomCmdReceive(): Z2S_onCustomCmdReceive cluster 0x4, command id 0x0, rssi: -63
[07:39:33][596843][I][z2s_devices_table.cpp:78] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0x94:0xde:0xb8:0xff:0xfe:0x6a:0x6e:0xc8, endpoint 0x1, channel type 0xffffffff
[07:39:33][596843][I][z2s_devices_table.cpp:623] Z2S_onCustomCmdReceive(): z2s_devices_table[channel_number_slot].Supla_channel 0x0
[07:39:33][596844][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0x4), command id(0x0), 
[07:39:33][596845][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[07:39:34][597791][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0x3, command id: 64
[07:39:34][597792][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[07:39:34][597792][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 0, disable_default_response 1, is_manuf_specific 0
[07:39:34][597793][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[07:39:34][597793][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 8 size: 2
[07:39:34][597794][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00 
[07:39:34][597794][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00 
[07:39:34][597794][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x6e5b, 0x6e5b, 0x0, 0x0
[07:39:34][597795][I][z2s_devices_table.cpp:614] Z2S_onCustomCmdReceive(): Z2S_onCustomCmdReceive cluster 0x3, command id 0x40, rssi: -64
[07:39:34][597795][I][z2s_devices_table.cpp:78] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0x94:0xde:0xb8:0xff:0xfe:0x6a:0x6e:0xc8, endpoint 0x1, channel type 0xffffffff
[07:39:34][597796][I][z2s_devices_table.cpp:623] Z2S_onCustomCmdReceive(): z2s_devices_table[channel_number_slot].Supla_channel 0x0
[07:39:34][597797][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0x3), command id(0x40), 
[07:39:34][597797][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[07:39:34][597799][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x12) callback
[07:39:34][597799][W][ZigbeeHandlers.cpp:49] zb_action_handler(): Receive unhandled Zigbee action(0x12) callback
[07:39:34][597802][I][ZigbeeHandlers.cpp:58] zb_raw_cmd_handler(): cluster id: 0x1000, command id: 64
[07:39:34][597802][I][ZigbeeHandlers.cpp:59] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[07:39:34][597803][I][ZigbeeHandlers.cpp:60] zb_raw_cmd_handler(): is common comand 0, disable_default_response 1, is_manuf_specific 0
[07:39:34][597804][I][ZigbeeHandlers.cpp:61] zb_raw_cmd_handler(): manuf_specific 0x0
[07:39:34][597804][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): RAW bufid: 9 size: 16
[07:39:34][597804][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0xC8 
[07:39:34][597805][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x6E 
[07:39:34][597805][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x6A 
[07:39:34][597805][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0xFE 
[07:39:34][597806][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0xFF 
[07:39:34][597806][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0xB8 
[07:39:34][597806][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0xDE 
[07:39:34][597807][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x94 
[07:39:34][597807][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x5B 
[07:39:34][597807][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x6E 
[07:39:34][597808][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x01 
[07:39:34][597808][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x04 
[07:39:34][597808][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x01 
[07:39:34][597809][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x06 
[07:39:34][597809][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x00 
[07:39:34][597809][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): 0x01 
[07:39:34][597810][I][ZigbeeHandlers.cpp:70] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x6e5b, 0x6e5b, 0x0, 0x0
[07:39:34][597810][I][z2s_devices_table.cpp:614] Z2S_onCustomCmdReceive(): Z2S_onCustomCmdReceive cluster 0x1000, command id 0x40, rssi: -62
[07:39:34][597811][I][z2s_devices_table.cpp:78] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0x94:0xde:0xb8:0xff:0xfe:0x6a:0x6e:0xc8, endpoint 0x1, channel type 0xffffffff
[07:39:34][597812][I][z2s_devices_table.cpp:623] Z2S_onCustomCmdReceive(): z2s_devices_table[channel_number_slot].Supla_channel 0x0
[07:39:34][597812][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0x1000), command id(0x40), 
[07:39:34][597813][I][ZigbeeHandlers.cpp:84] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[07:39:42]Send: [53 55 50 4C 41 17 6C 00 00 00 E0 01 00 00 00 00 00 00 ]
[07:39:42]Send: [53 55 50 4C 41 ]
[07:39:42]Recv: [53 55 50 4C 41 17 67 00 00 00 EA 01 00 00 1A 00 00 00 E9 07 03 07 06 07 27 2A 0E 00 00 00 45 75 72 6F 70 65 2F 57 61 72 73 61 77 00 53 55 50 4C 41 ]
[07:39:42]Clock: current time: 2025-03-07 07:39:42
[07:39:46][610091][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x1), short address(0x6e5b), model id(0x5203), cluster id(0x5), rejoined(NO)
[07:39:46][610092][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x1), short address(0x6e5b), model id(0x5203), cluster id(0x6), rejoined(NO)
[07:39:46][610093][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x1), short address(0x6e5b), model id(0x5203), cluster id(0x8), rejoined(NO)
[07:39:46][610093][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x2), short address(0x6e5b), model id(0x5204), cluster id(0xfc80), rejoined(NO)
[07:39:46][610094][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x2), short address(0x6e5b), model id(0x5204), cluster id(0xfc7f), rejoined(NO)
[07:39:46][610095][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x3), short address(0x6e5b), model id(0x5205), cluster id(0xfc80), rejoined(NO)
[07:39:46][610096][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x3), short address(0x6e5b), model id(0x5205), cluster id(0xfc7f), rejoined(NO)
[07:40:07]Send: [53 55 50 4C 41 17 6D 00 00 00 28 00 00 00 10 00 00 00 D6 A2 CA 67 00 00 00 00 2C 69 0E 00 00 00 00 00 ]
[07:40:07]Send: [53 55 50 4C 41 ]
[07:40:07]Recv: [53 55 50 4C 41 17 68 00 00 00 32 00 00 00 10 00 00 00 C7 94 CA 67 00 00 00 00 39 16 04 00 00 00 00 00 53 55 50 4C 41 ]
[07:40:29][653314][I][ZigbeeHandlers.cpp:35] zb_action_handler(): Receive Zigbee action(0x1040) callback
[07:40:29][653314][I][ZigbeeHandlers.cpp:343] zb_cmd_custom_cluster_req_handler(): Receive custom command: 1 from address 0x6e5b
[07:40:29][653315][I][ZigbeeHandlers.cpp:345] zb_cmd_custom_cluster_req_handler(): Payload size: 2
[07:40:29][653315][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x1
[07:40:29][653316][I][ZigbeeHandlers.cpp:347] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x1
[07:40:29][653316][I][z2s_devices_table.cpp:715] Z2S_onCmdCustomClusterReceive(): IKEA custom cluster(0xfc7f) on endpoint(0x1), command(0x1)
[07:40:29][653317][I][z2s_devices_table.cpp:557] processIkeaSymfoniskCommands(): IKEA SYMFONISK command: cluster(0xfc7f), command id(0x1), 
[07:40:32]Send: [53 55 50 4C 41 17 6E 00 00 00 28 00 00 00 10 00 00 00 EF A2 CA 67 00 00 00 00 DC 74 0E 00 00 00 00 00 ]
[07:40:32]Send: [53 55 50 4C 41 ]
[07:40:32]Recv: [53 55 50 4C 41 17 69 00 00 00 32 00 00 00 10 00 00 00 E0 94 CA 67 00 00 00 00 9A C4 03 00 00 00 00 00 53 55 50 4C 41 ]
[07:40:57]Send: [53 55 50 4C 41 17 6F 00 00 00 28 00 00 00 10 00 00 00 08 A3 CA 67 00 00 00 00 77 84 0E 00 00 00 00 00 ]
[07:40:57]Send: [53 55 50 4C 41 ]
[07:40:57]Recv: [53 55 50 4C 41 17 6A 00 00 00 32 00 00 00 10 00 00 00 F9 94 CA 67 00 00 00 00 62 B3 03 00 00 00 00 00 53 55 50 4C 41 ]
[07:41:22]Send: [53 55 50 4C 41 17 70 00 00 00 28 00 00 00 10 00 00 00 21 A3 CA 67 00 00 00 00 1A 94 0E 00 00 00 00 00 ]
[07:41:22]Send: [53 55 50 4C 41 ]
[07:41:22]Recv: [53 55 50 4C 41 17 6B 00 00 00 32 00 00 00 10 00 00 00 12 95 CA 67 00 00 00 00 CD 42 04 00 00 00 00 00 53 55 50 4C 41 ]
[07:41:46][730109][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x1), short address(0x6e5b), model id(0x5203), cluster id(0x5), rejoined(NO)
[07:41:46][730110][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x1), short address(0x6e5b), model id(0x5203), cluster id(0x6), rejoined(NO)
[07:41:46][730111][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x1), short address(0x6e5b), model id(0x5203), cluster id(0x8), rejoined(NO)
[07:41:46][730111][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x2), short address(0x6e5b), model id(0x5204), cluster id(0xfc80), rejoined(NO)
[07:41:46][730112][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x2), short address(0x6e5b), model id(0x5204), cluster id(0xfc7f), rejoined(NO)
[07:41:46][730113][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x3), short address(0x6e5b), model id(0x5205), cluster id(0xfc80), rejoined(NO)
[07:41:46][730114][I][Z2S_Gateway.ino:304] loop(): Device on endpoint(0x3), short address(0x6e5b), model id(0x5205), cluster id(0xfc7f), rejoined(NO)

Jak nie straciłeś jeszcze zapał to wypróbuj 0.5.13

[vajera]

dobra długo nie wiedziałem jak pobrać te logi ale już wiem prośba o dodanie czujnika temperatury i wilgotności xiaomi (bez wyświetlacza)

Code: Select all

[328934][D][Z2S_Gateway.ino:656] loop(): Unknown model LUMI::lumi.sens, no binding is possible

jest to coś takiego

https://www.zigbee2mqtt.io/devices/WSDCGQ01LM.html

Dzięki

Dodałem - będzie w 0.5.14

[arqiu70]

Czy jest szansa na dodanie żarówki RGBW?

[ 96025][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "eWeLink"
[ 96030][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "CK-BL702-AL-01(7009_Z102LG03-1)"

Poprzednia:

[ 49281][ZigbeeGateway.cpp:330] zbReadBasicCluster(): Peer Manufacturer is "zbeacon"
[ 49284][ZigbeeGateway.cpp:337] zbReadBasicCluster(): Peer Model is "TS0505"

dodaje się do Z2S ale niestety nie działa i dodatkowo restartuje bramkę.

[vajera]

Czy jest szansa na dodanie żarówki RGBW?

[ 96025][][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "eWeLink"
[ 96030][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "CK-BL702-AL-01(7009_Z102LG03-1)"

Poprzednia:

[ 49281][][ZigbeeGateway.cpp:330] zbReadBasicCluster(): Peer Manufacturer is "zbeacon"
[ 49284][ZigbeeGateway.cpp:337] zbReadBasicCluster(): Peer Model is "TS0505"

dodaje się do Z2S ale niestety nie działa i dodatkowo restartuje bramkę.

Obsługa żarówek RGBW jest aktualnie w poczekalni - trochę "zepsułem" pierwotny kod i teraz muszę znaleźć czas na poprawki.

[arqiu70]

Czy jest szansa na dodanie żarówki RGBW?

[ 96025][][ZigbeeGateway.cpp:342] zbReadBasicCluster(): Peer Manufacturer is "eWeLink"
[ 96030][ZigbeeGateway.cpp:349] zbReadBasicCluster(): Peer Model is "CK-BL702-AL-01(7009_Z102LG03-1)"

Poprzednia:

[ 49281][][ZigbeeGateway.cpp:330] zbReadBasicCluster(): Peer Manufacturer is "zbeacon"
[ 49284][ZigbeeGateway.cpp:337] zbReadBasicCluster(): Peer Model is "TS0505"

dodaje się do Z2S ale niestety nie działa i dodatkowo restartuje bramkę.

Obsługa żarówek RGBW jest aktualnie w poczekalni - trochę "zepsułem" pierwotny kod i teraz muszę znaleźć czas na poprawki.

Ok, dzięki za odpowiedź. Czekam cierpliwie. Proszę o informacje jak coś się zmieni żebym przetestował.

[klimasstudio]

Jak nie straciłeś jeszcze zapał to wypróbuj 0.5.13

Do póki Ty się nie poddajesz ja też się nie poddam. Jesteś wielki !! Bo działa Nie rozumiem jeszcze jak tym przyciskiem wywołać polecenia: DOT HELD, DOT LONG RELEASED oraz DOTS HELD, DOTS LONG RELEASED