Zgłoszenia nowych urządzeń [bramka Zigbee]

Moderator: vajera

User avatar
Mario78
Posts: 409
Joined: Fri Jan 05, 2024 6:18 am
Location: Śląsk
Been thanked: 1 time

Post

Alpines wrote: Tue May 13, 2025 6:57 pm @vajera - a jest szansa na SNZB-03 czujnik ruchu ? Jest juz SNZB-02D i a ten -03 nie chce sie połaczyc
musisz dac logi to pewnie bedzie:)
Top
cinas
Posts: 650
Joined: Sun Aug 14, 2022 6:59 am
Location: Kaczory
Has thanked: 3 times
Been thanked: 7 times

Post

Proszę o dodanie przekaźnika z przyciskiem do puszki

https://allegro.pl/oferta/tuya-jednokan ... 5338289278

Code: Select all

8] esp_zb_app_signal_handler(): Network(0x906b) is open for 180 seconds
[ 30244][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 30246][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[ 30279][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x7ecd)
[ 30280][V][ZigbeeCore.cpp:359] esp_zb_app_signal_handler(): Device capabilities: 0x8e
[ 30280][D][ZigbeeGateway.cpp:517] zbDeviceAnnce(): zbDeviceAnnce short address (0x7ecd), ieee_addr (0xa4):(0xc1):(0x38):(0x2f):(0xe3):(0xbd):(0x32):(0x14)
[ 30281][D][ZigbeeGateway.cpp:520] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x7ecd), ieee_addr (0xa4):(0xc1):(0x38):(0x2f):(0xe3):(0xbd):(0x32):(0x14)
[ 30282][I][ZigbeeGateway.cpp:544] zbDeviceAnnce(): Tuya magic last hope
[ 30506][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 30507][V][ZigbeeHandlers.cpp:155] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 30508][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[ 30508][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_tqlv4ug4"
[ 30509][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[ 30510][I][ZigbeeGateway.cpp:401] zbReadBasicCluster(): ZCL version id is "3"
[ 30510][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(74)
[ 30511][I][ZigbeeGateway.cpp:407] zbReadBasicCluster(): ZCL application version id is "74"
[ 30511][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[ 30512][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "TS0001"
[ 30512][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(1)
[ 30513][I][ZigbeeGateway.cpp:413] zbReadBasicCluster(): ZCL power source id is "1"
[ 30513][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0xfffe), type(0x30), value(0)
[ 30514][I][ZigbeeGateway.cpp:417] zbReadBasicCluster(): Attribute 0xFFFE, data type 0x30
[ 30578][I][ZigbeeGateway.cpp:587] printJoinedDevices(): joined devices:
[ 30578][I][ZigbeeGateway.cpp:590] printJoinedDevices(): Device on endpoint 1, short address: 0x7ecd
[ 30595][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 30596][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): Received default response: from address(0x7ecd), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0x0
[ 30597][V][ZigbeeHandlers.cpp:279] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 30597][I][ZigbeeGateway.cpp:1555] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x1[0x0]
[ 30598][I][ZigbeeGateway.cpp:1557] zbCmdDefaultResponse(): custom cmd rssi -46
[ 30979][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 30996][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 30997][V][ZigbeeHandlers.cpp:155] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 30998][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[ 30998][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_tqlv4ug4"
[ 31481][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x2
[ 31481][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[ 31516][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 31517][V][ZigbeeHandlers.cpp:155] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 31518][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[ 31519][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "TS0001"
[ 31527][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[ 31548][I][ZigbeeCore.cpp:388] esp_zb_app_signal_handler(): Network(0x906b) is open for 180 seconds
[ 31982][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x3
[ 31982][I][ZigbeeGateway.cpp:1225] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[ 31999][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[ 32000][V][ZigbeeHandlers.cpp:191] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 32000][V][ZigbeeHandlers.cpp:198] zb_cmd_write_attr_resp_handler(): Write attribute response: status(0), cluster(0x0), attribute(0xffff)
[ 32483][I][ZigbeeGateway.cpp:307] zbPrintDeviceDiscovery(): short_addr_req 32461
[ 32499][I][ZigbeeGateway.cpp:241] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 32461, endpoints count 2
[ 32499][I][ZigbeeGateway.cpp:244] Z2S_active_ep_req_cb(): Endpont # 1, id 1
[ 32500][I][ZigbeeGateway.cpp:244] Z2S_active_ep_req_cb(): Endpont # 2, id 242
[ 32521][I][ZigbeeGateway.cpp:260] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 32461, endpoint # 1
[ 32521][I][ZigbeeGateway.cpp:261] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 9, out clusters # 2
[ 32522][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 1, id 3
[ 32522][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 2, id 4
[ 32523][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 3, id 5
[ 32523][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 4, id 6
[ 32523][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 5, id 1794
[ 32524][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 6, id 2820
[ 32524][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 7, id 57344
[ 32525][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 8, id 57345
[ 32525][I][ZigbeeGateway.cpp:265] Z2S_simple_desc_req_cb(): In cluster # 9, id 0
[ 32526][I][ZigbeeGateway.cpp:280] Z2S_simple_desc_req_cb(): Out cluster # 1, id 25
[ 32526][I][ZigbeeGateway.cpp:280] Z2S_simple_desc_req_cb(): Out cluster # 2, id 10
NLME Status Indication, status: 0x9
NLME Status Indication, status: 0x9
NLME Status Indication, status: 0x9
[ 32654][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 32655][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): Received default response: from address(0x7ecd), src_endpoint(1) to dst_endpoint(1), cluster(0x3) for command (0xc) with status 0x84
[ 32656][V][ZigbeeHandlers.cpp:279] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 32656][I][ZigbeeGateway.cpp:1555] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x5[0x0]
[ 32657][I][ZigbeeGateway.cpp:1557] zbCmdDefaultResponse(): custom cmd rssi -47
[ 32691][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 32692][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): Received default response: from address(0x7ecd), src_endpoint(1) to dst_endpoint(1), cluster(0x4) for command (0xc) with status 0x84
[ 32693][V][ZigbeeHandlers.cpp:279] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 32693][I][ZigbeeGateway.cpp:1555] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x6[0x0]
[ 32694][I][ZigbeeGateway.cpp:1557] zbCmdDefaultResponse(): custom cmd rssi -47
[ 35578][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 35578][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): Received default response: from address(0x7ecd), src_endpoint(1) to dst_endpoint(1), cluster(0x702) for command (0xc) with status 0x84
[ 35579][V][ZigbeeHandlers.cpp:279] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 35580][I][ZigbeeGateway.cpp:1555] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn 0x9[0x0]
[ 35580][I][ZigbeeGateway.cpp:1557] zbCmdDefaultResponse(): custom cmd rssi -55
[ 36936][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 36936][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe000)
[ 36937][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe000), attribute id (0xd003), attribute data type (0x42)
[ 37016][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37017][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 37017][I][ZigbeeGateway.cpp:679] zbAttributeReporting(): zbAttributeReporting on/off report ON
[ 37018][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37018][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 37019][I][ZigbeeGateway.cpp:682] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4001), attribute data type (0x21), attribute value (0x0)
[ 37020][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37020][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 37021][I][ZigbeeGateway.cpp:682] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x4002), attribute data type (0x21), attribute value (0x0)
[ 37021][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37022][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x6)
[ 37022][I][ZigbeeGateway.cpp:682] zbAttributeReporting(): zbAttributeReporting on/off cluster (0x6), attribute id (0x8002), attribute data type (0x30), attribute value (0x1)
[ 37051][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37051][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 37052][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe001), attribute id (0xd030), attribute data type (0x30)
[ 37053][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37053][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 37054][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe001), attribute id (0xd000), attribute data type (0x20)
[ 37055][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37055][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 37056][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe001), attribute id (0xd001), attribute data type (0x1b)
[ 37057][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37057][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 37058][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe001), attribute id (0xd002), attribute data type (0x23)
[ 37059][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37059][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 37060][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe001), attribute id (0xd003), attribute data type (0x23)
[ 37060][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37061][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 37061][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe001), attribute id (0xd004), attribute data type (0x23)
[ 37062][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37063][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[ 37063][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0xe001), attribute id (0xd005), attribute data type (0x23)
[ 38338][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[ 38338][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 38339][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[ 38339][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[ 38340][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 11 size: 2
[ 38340][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x07
[ 38340][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00
[ 38341][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x7ecd, 0x7ecd, 0x0, 0x0
[ 38341][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[ 45453][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 45453][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 45454][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0x0), attribute id (0x1), attribute data type (0x20)
[ 45455][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 45455][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 45456][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0x0), attribute id (0xffe2), attribute data type (0x20)
[ 45457][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 45457][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 45458][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0x0), attribute id (0xffe4), attribute data type (0x20)
[ 45686][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 45687][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 45687][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0x0), attribute id (0xffdf), attribute data type (0x42)
[199825][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[199825][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[199826][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0x0), attribute id (0x1), attribute data type (0x20)
[199827][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[199827][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[199828][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0x0), attribute id (0xffe2), attribute data type (0x20)
[199828][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x2000) callback
[199829][V][ZigbeeHandlers.cpp:133] zb_attribute_reporting_handler(): Received report from address(0x7ecd) src endpoint(1) to dst endpoint(1) cluster(0x0)
[199830][I][ZigbeeGateway.cpp:847] zbAttributeReporting(): zbAttributeReporting from (0x3214), endpoint (1), cluster (0x0), attribute id (0xffe4), attribute data type (0x20)
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

cinas wrote: Wed May 14, 2025 11:51 am Proszę o dodanie przekaźnika z przyciskiem do puszki

https://allegro.pl/oferta/tuya-jednokan ... 5338289278
Postaram się go dzisiaj dodać.

Ciekawostka: urządzenie zgłasza klastry ElectricalMeasurement i SimpleMetering, więc Chińczyk wgrał software od gniazdka z licznikiem :D
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Mario78 wrote: Tue May 13, 2025 6:49 pm vajera uprzejmie proszę o dodanie czujnika ruchu
Peer Model is "SNZB-03" Manufacturer is "_TZ3000_bb6xaihh"
A jesteś pewny tych danych - wygląda to trochę jak krzyżówka Sonoffa z Tuya?
Last edited by vajera on Wed May 14, 2025 3:28 pm, edited 1 time in total.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Alpines wrote: Tue May 13, 2025 6:57 pm @vajera - a jest szansa na SNZB-03 czujnik ruchu ? Jest juz SNZB-02D i a ten -03 nie chce sie połaczyc
W bazie jest:

Code: Select all

{ .manufacturer_name = "eWeLink", .model_name = "SNZB-03", 
   .z2s_device_desc_id = Z2S_DEVICE_DESC_IAS_ZONE_SENSOR, .z2s_device_endpoints_count = 1}
,

więc jeżeli Twój egzemplarz nie chce się dodać to musisz zweryfikować manufacturer id/model id
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

cinas wrote: Wed May 14, 2025 11:51 am Proszę o dodanie przekaźnika z przyciskiem do puszki

https://allegro.pl/oferta/tuya-jednokan ... 5338289278
Będzie w 0.7.79-14/05/2025 (mniej więcej za kwadrans).
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

prze_cinek wrote: Sun May 11, 2025 7:31 am Tak - choć z mojej wypowiedzi może nie wynikać, że nie używam jej z bramką suplową.

Ale przy okazji tego, że byłem w miejscu gdzie ten czujnik jest - zebrałem też dla niego logi tak by można go dodać.
Kupiłem, dodałem do bramki (0.7.79-14/05/2025) i przetestowałem. Wydaje się reagować prawidłowo, muszę go jeszcze potestować w temacie nawiązywania połączenia z bramką po restarcie. Faktycznie jest dosyć pękaty, ale ma taki mały pstryczek, który odpowiada za TAMPER ALARM - on nie idzie przez klaster IAS tylko przez klaster Sonoffa 0xFC11, ale też go dodałem - przy okazji uporządkowałem w kodzie obsługę tego klastra bo to nie tylko TRVZB go używa.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
cinas
Posts: 650
Joined: Sun Aug 14, 2022 6:59 am
Location: Kaczory
Has thanked: 3 times
Been thanked: 7 times

Post

vajera wrote: Wed May 14, 2025 3:22 pm
cinas wrote: Wed May 14, 2025 11:51 am Proszę o dodanie przekaźnika z przyciskiem do puszki

https://allegro.pl/oferta/tuya-jednokan ... 5338289278
Będzie w 0.7.79-14/05/2025 (mniej więcej za kwadrans).
Działa , dzięki
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

cinas wrote: Wed May 14, 2025 4:25 pm Działa , dzięki
Zobacz sobie ten wątek.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
Mario78
Posts: 409
Joined: Fri Jan 05, 2024 6:18 am
Location: Śląsk
Been thanked: 1 time

Post

vajera wrote: Wed May 14, 2025 1:17 pm
Mario78 wrote: Tue May 13, 2025 6:49 pm vajera uprzejmie proszę o dodanie czujnika ruchu
Peer Model is "SNZB-03" Manufacturer is "_TZ3000_bb6xaihh"
A jesteś pewny tych danych - wygląda to trochę jak krzyżówka Sonoffa z Tuya?
Niby jestem ale zrobię logi jeszcze raz. Może coś siało w tle....
To na 100 jest tuya.
Top

Return to “Bramka ZigBee”