Zgłoszenia nowych urządzeń 2026 [bramka ZigBee]

Moderator: vajera

mlynoza
Posts: 14
Joined: Sat Apr 17, 2021 8:40 am

Post

vajera wrote: Mon Feb 09, 2026 11:50 am
mlynoza wrote: Mon Feb 09, 2026 9:23 am Witam.

Poproszę o dodanie nowego urządzenia

Sterownik rolet MOES MS-108ZR

Unknown model _TZ3000_1dd0d5yi::TS130F, no binding is possible
+BWNU: 1.4.13-09/02/26
Urządzenie dodane, działa poprawnie na przyciski fizyczne jak i w aplikacji.
Procenty i animacje przy przyciskach fizycznych i chwilowych OK. Ale brak animacji i procentów przy przyciskach całkowitego zamknięcia i otwarcia. Można temu zaradzić???
You do not have the required permissions to view the files attached to this post.
Top
QLQ
Posts: 2512
Joined: Sun Sep 03, 2017 9:13 am

Post

vajera wrote: Sun Feb 08, 2026 8:44 pm
QLQ wrote: Thu Feb 05, 2026 7:56 pm Cześć.
Uprzejmie poproszę:

Code: Select all

Unknown model LUMI::lumi.sensor_smoke.acn03, no binding is possible
to to: https://www.zigbee2mqtt.io/devices/JY-GZ-01AQ.html
Cześć,
to jest dosyć rozbudowany model, więc będę potrzebował Twojej pomocy. Wersja 1.4.10-08/02/26 rozpozna ten czujnik, sparuje go i doda pewną ilość kanałów Supla, które póki co będą nieaktywne. Potrzebuje logi z procesu parowania czujnika i z kilku minut jego pracy, najlepiej z uwzględnieniem reakcji na przycisk TEST, jeżeli takowy posiada.
Urządzenie dalej nie loguje się do bramki. Komunikat w Last binding state j/w.

Log z putty:

Code: Select all

[     1][V][ZigbeeEP.cpp:22] ZigbeeEP(): Endpoint: 1
3 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 09 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 0                                                                                                                                                             0 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 1D                                                                                                                                                              00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Button[0] pressed
Button[0] released
[ 39444][I][Z2S_Gateway.ino:160] supla_callback_bridge(): event(0x4), action(0x0)
[ 39445][V][ZigbeeCore.cpp:272] openNetwork(): Opening network for joining for 180 seconds
[ 39913][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[ 39914][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[ 39914][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 39915][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 39915][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 39916][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
Recv: [53 55 50 4C 41 1B 0A 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0A 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B5 32 00 00 28 00 00 00 21 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0B 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0B 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B6 34 00 00 32 00 00 00 2B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 53983][I][ZigbeeCore.cpp:474] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0xcf0b), rejoin (NO)
[ 55269][V][ZigbeeCore.cpp:492] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 55536][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55537][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0013, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0xfffd, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55539][I][ZigbeeCore.cpp:380] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xc321)
[ 55539][V][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Device capabilities: 0x84
[ 55540][I][z2s_devices_table.cpp:4968] Z2S_onBTCBoundDevice(): BTC bound device 54:EF:44:10:01:5D:75:8C (0xc321) on endpoint(0x0), cluster id(0x0)
[ 55541][I][z2s_devices_table.cpp:4977] Z2S_onBTCBoundDevice(): zb_device_slot 255
[ 55541][I][z2s_devices_table.cpp:4981] Z2S_onBTCBoundDevice(): No ZbDevice - full registration required
[ 55826][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55827][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0002, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55943][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55944][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x8006, asdu_length: 6
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55946][D][ZigbeeGateway.cpp:495] find_Cb(): BASIC cluster found: short address(0xc321), endpoint(1)
[ 55947][I][ZigbeeGateway.cpp:1092] printJoinedDevices(): joined devices:
[ 55947][I][ZigbeeGateway.cpp:1095] printJoinedDevices(): Device on endpoint 1, short address: 0xc321
[ 55948][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 55949][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 55949][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 55950][I][z2s_web_gui.cpp:3914] Z2S_stopWebGUI(): STOP WEB GUI
[ 55951][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 56474][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 56475][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 147, rx_time: 0
[ 56477][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 56477][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 56478][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 56478][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 56479][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 3 size: 9
[ 56479][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 56479][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4C
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x55
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4D
[ 56482][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x49
[ 56482][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 56482][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 56483][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 56484][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 56484][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 56485][I][ZigbeeGateway.cpp:702] zbReadBasicCluster(): Peer Manufacturer is "LUMI"
[ 56953][I][ZigbeeGateway.cpp:643] zbQueryDeviceBasicCluster(): basic tsn 0x0
[ 56953][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[ 57052][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 57052][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 31
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[ 57054][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 57054][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 57055][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 57055][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 57056][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 11 size: 28
[ 57056][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x05
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 57058][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x17
[ 57058][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6C
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x75
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6D
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x69
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2E
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x65
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6E
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x72
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x5F
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6D
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6B
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x65
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2E
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x61
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x63
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6E
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x30
[ 57066][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x33
[ 57066][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 57067][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 57067][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 57068][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 57069][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(23)
[ 57069][I][ZigbeeGateway.cpp:712] zbReadBasicCluster(): Peer Model is "lumi.sensor_smoke.acn03"
[ 57078][I][ZigbeeCore.cpp:464] esp_zb_app_signal_handler(): Device 0xc321 authorized (status: 0, type: 1)
[ 57257][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 57257][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0036, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0xfffc, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 147, rx_time: 0
[ 57259][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[ 57260][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[ 57260][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 57261][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 57261][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 57262][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
[ 57954][I][ZigbeeGateway.cpp:643] zbQueryDeviceBasicCluster(): basic tsn 0x1
[ 57954][I][Z2S_Gateway.ino:1186] loop(): sizeof(Z2S_DEVICES_LIST) = 38760
[ 57956][D][Z2S_Gateway.ino:1854] loop(): Unknown model LUMI::lumi.sensor_smoke.acn03, no binding is possible
[ 57957][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 57957][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 57958][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 58959][I][z2s_web_gui.cpp:3902] Z2S_startWebGUI(): STOP WEB GUI
[ 58960][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16432, action 0
[ 60001][I][Z2S_Gateway.ino:959] loop(): New UTC time 823977761, new local time 823977761
[ 60002][I][Z2S_Gateway.ino:991] loop():
Local Time Cluster Time status attribute 2
UTC time attribute 823977761
local time attribute 823977761
[ 60004][I][z2s_web_gui.cpp:977] fillMemoryUptimeInformation(): Memory & uptime information <b><i>Flash chip real size:</b></i> 16777216 B <b>| <i>Free Sketch Space:</b></i> 3407872 B<br><b><i>HeapSize:</b></i> 358364 B <b>| <i>FreeHeap:</b></i> 107664 B <b>| <i>MinimalFreeHeap:</b></i> 99140 B <b>| <i>MaxAllocHeap:</b></i> 92148 B<br><b><i>uxTaskGetStackHighWaterMark:</b></i> 3020 B <br><b><i>Total PSRAM:</b></i> 0 B <b>| <i>Free PSRAM:</b></i> 0 B<br><br><b><i>Local time:</i></b> Mon Feb  9 18:42:41 2026
                                     <b><i>Supla uptime:</i></b> 60 s
Recv: [53 55 50 4C 41 1B 0C 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0C 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B6 34 00 00 3D 00 00 00 36 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 66601][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 66602][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[ 66604][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 66604][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 66605][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 66605][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 66606][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 5 size: 9
[ 66606][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 66606][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4C
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x55
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4D
[ 66609][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x49
[ 66609][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 66610][I][z2s_devices_table.cpp:4437] Z2S_onCustomCmdReceive(): 54:EF:44:10:01:5D:75:8C, endpoint 0x1, cluster 0x0, cmd id 0x1
[ 66610][E][z2s_devices_table.cpp:59] no_channel_found_error_func(): No channel found for address 54:EF:44:10:01:5D:75:8C
[ 66611][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 66612][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 66612][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 66613][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 66613][I][ZigbeeGateway.cpp:702] zbReadBasicCluster(): Peer Manufacturer is "LUMI"
Recv: [53 55 50 4C 41 1B 0D 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0D 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AC 20 00 00 48 00 00 00 41 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0E 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0E 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AF 26 00 00 52 00 00 00 4B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0F 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0F 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AB 1E 00 00 5D 00 00 00 56 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 10 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 10 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 68 00 00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[106957][I][ZigbeeCore.cpp:474] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0xc321), rejoin (NO)
[108240][V][ZigbeeCore.cpp:492] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[108506][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[108507][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 50, cluster_id: 0x0013, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0xfffd, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[108508][I][ZigbeeCore.cpp:380] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x0832)
[108509][V][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Device capabilities: 0x84
[108509][I][z2s_devices_table.cpp:4968] Z2S_onBTCBoundDevice(): BTC bound device 54:EF:44:10:01:5D:75:8C (0x832) on endpoint(0x0), cluster id(0x0)
[108510][I][z2s_devices_table.cpp:4977] Z2S_onBTCBoundDevice(): zb_device_slot 255
[108510][I][z2s_devices_table.cpp:4981] Z2S_onBTCBoundDevice(): No ZbDevice - full registration required
[108795][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[108796][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0002, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[109123][I][ZigbeeCore.cpp:464] esp_zb_app_signal_handler(): Device 0x0832 authorized (status: 0, type: 1)
[109221][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[109221][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 50, cluster_id: 0x0036, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0xfffc, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[109223][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[109224][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[109224][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[109225][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[109225][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[109226][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
Recv: [53 55 50 4C 41 1B 11 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 11 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AA 1C 00 00 72 00 00 00 6B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[120008][I][Z2S_Gateway.ino:959] loop(): New UTC time 823977821, new local time 823977821
[120009][I][Z2S_Gateway.ino:991] loop():
Local Time Cluster Time status attribute 2
UTC time attribute 823977821
local time attribute 823977821
[120011][I][z2s_web_gui.cpp:977] fillMemoryUptimeInformation(): Memory & uptime information <b><i>Flash chip real size:</b></i> 16777216 B <b>| <i>Free Sketch Space:</b></i> 3407872 B<br><b><i>HeapSize:</b></i> 358364 B <b>| <i>FreeHeap:</b></i> 107664 B <b>| <i>MinimalFreeHeap:</b></i> 99140 B <b>| <i>MaxAllocHeap:</b></i> 92148 B<br><b><i>uxTaskGetStackHighWaterMark:</b></i> 3020 B <br><b><i>Total PSRAM:</b></i> 0 B <b>| <i>Free PSRAM:</b></i> 0 B<br><br><b><i>Local time:</i></b> Mon Feb  9 18:43:41 2026
                                     <b><i>Supla uptime:</i></b> 120 s
Recv: [53 55 50 4C 41 1B 12 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 12 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 7C 00 00 00 75 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
jak coś nie działa to włącz zasilanie.....
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

QLQ wrote: Mon Feb 09, 2026 5:46 pm
vajera wrote: Sun Feb 08, 2026 8:44 pm
QLQ wrote: Thu Feb 05, 2026 7:56 pm Cześć.
Uprzejmie poproszę:

Code: Select all

Unknown model LUMI::lumi.sensor_smoke.acn03, no binding is possible
to to: https://www.zigbee2mqtt.io/devices/JY-GZ-01AQ.html
Cześć,
to jest dosyć rozbudowany model, więc będę potrzebował Twojej pomocy. Wersja 1.4.10-08/02/26 rozpozna ten czujnik, sparuje go i doda pewną ilość kanałów Supla, które póki co będą nieaktywne. Potrzebuje logi z procesu parowania czujnika i z kilku minut jego pracy, najlepiej z uwzględnieniem reakcji na przycisk TEST, jeżeli takowy posiada.
Urządzenie dalej nie loguje się do bramki. Komunikat w Last binding state j/w.

Log z putty:

Code: Select all

[     1][V][ZigbeeEP.cpp:22] ZigbeeEP(): Endpoint: 1
3 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 09 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 0                                                                                                                                                             0 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 1D                                                                                                                                                              00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Button[0] pressed
Button[0] released
[ 39444][I][Z2S_Gateway.ino:160] supla_callback_bridge(): event(0x4), action(0x0)
[ 39445][V][ZigbeeCore.cpp:272] openNetwork(): Opening network for joining for 180 seconds
[ 39913][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[ 39914][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[ 39914][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 39915][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 39915][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 39916][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
Recv: [53 55 50 4C 41 1B 0A 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0A 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B5 32 00 00 28 00 00 00 21 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0B 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0B 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B6 34 00 00 32 00 00 00 2B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 53983][I][ZigbeeCore.cpp:474] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0xcf0b), rejoin (NO)
[ 55269][V][ZigbeeCore.cpp:492] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 55536][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55537][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0013, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0xfffd, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55539][I][ZigbeeCore.cpp:380] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xc321)
[ 55539][V][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Device capabilities: 0x84
[ 55540][I][z2s_devices_table.cpp:4968] Z2S_onBTCBoundDevice(): BTC bound device 54:EF:44:10:01:5D:75:8C (0xc321) on endpoint(0x0), cluster id(0x0)
[ 55541][I][z2s_devices_table.cpp:4977] Z2S_onBTCBoundDevice(): zb_device_slot 255
[ 55541][I][z2s_devices_table.cpp:4981] Z2S_onBTCBoundDevice(): No ZbDevice - full registration required
[ 55826][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55827][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0002, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55943][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55944][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x8006, asdu_length: 6
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55946][D][ZigbeeGateway.cpp:495] find_Cb(): BASIC cluster found: short address(0xc321), endpoint(1)
[ 55947][I][ZigbeeGateway.cpp:1092] printJoinedDevices(): joined devices:
[ 55947][I][ZigbeeGateway.cpp:1095] printJoinedDevices(): Device on endpoint 1, short address: 0xc321
[ 55948][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 55949][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 55949][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 55950][I][z2s_web_gui.cpp:3914] Z2S_stopWebGUI(): STOP WEB GUI
[ 55951][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 56474][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 56475][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 147, rx_time: 0
[ 56477][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 56477][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 56478][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 56478][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 56479][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 3 size: 9
[ 56479][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 56479][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4C
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x55
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4D
[ 56482][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x49
[ 56482][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 56482][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 56483][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 56484][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 56484][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 56485][I][ZigbeeGateway.cpp:702] zbReadBasicCluster(): Peer Manufacturer is "LUMI"
[ 56953][I][ZigbeeGateway.cpp:643] zbQueryDeviceBasicCluster(): basic tsn 0x0
[ 56953][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[ 57052][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 57052][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 31
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[ 57054][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 57054][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 57055][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 57055][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 57056][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 11 size: 28
[ 57056][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x05
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 57058][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x17
[ 57058][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6C
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x75
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6D
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x69
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2E
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x65
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6E
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x72
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x5F
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6D
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6B
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x65
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2E
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x61
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x63
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6E
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x30
[ 57066][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x33
[ 57066][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 57067][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 57067][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 57068][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 57069][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(23)
[ 57069][I][ZigbeeGateway.cpp:712] zbReadBasicCluster(): Peer Model is "lumi.sensor_smoke.acn03"
[ 57078][I][ZigbeeCore.cpp:464] esp_zb_app_signal_handler(): Device 0xc321 authorized (status: 0, type: 1)
[ 57257][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 57257][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0036, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0xfffc, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 147, rx_time: 0
[ 57259][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[ 57260][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[ 57260][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 57261][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 57261][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 57262][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
[ 57954][I][ZigbeeGateway.cpp:643] zbQueryDeviceBasicCluster(): basic tsn 0x1
[ 57954][I][Z2S_Gateway.ino:1186] loop(): sizeof(Z2S_DEVICES_LIST) = 38760
[ 57956][D][Z2S_Gateway.ino:1854] loop(): Unknown model LUMI::lumi.sensor_smoke.acn03, no binding is possible
[ 57957][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 57957][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 57958][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 58959][I][z2s_web_gui.cpp:3902] Z2S_startWebGUI(): STOP WEB GUI
[ 58960][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16432, action 0
[ 60001][I][Z2S_Gateway.ino:959] loop(): New UTC time 823977761, new local time 823977761
[ 60002][I][Z2S_Gateway.ino:991] loop():
Local Time Cluster Time status attribute 2
UTC time attribute 823977761
local time attribute 823977761
[ 60004][I][z2s_web_gui.cpp:977] fillMemoryUptimeInformation(): Memory & uptime information <b><i>Flash chip real size:</b></i> 16777216 B <b>| <i>Free Sketch Space:</b></i> 3407872 B<br><b><i>HeapSize:</b></i> 358364 B <b>| <i>FreeHeap:</b></i> 107664 B <b>| <i>MinimalFreeHeap:</b></i> 99140 B <b>| <i>MaxAllocHeap:</b></i> 92148 B<br><b><i>uxTaskGetStackHighWaterMark:</b></i> 3020 B <br><b><i>Total PSRAM:</b></i> 0 B <b>| <i>Free PSRAM:</b></i> 0 B<br><br><b><i>Local time:</i></b> Mon Feb  9 18:42:41 2026
                                     <b><i>Supla uptime:</i></b> 60 s
Recv: [53 55 50 4C 41 1B 0C 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0C 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B6 34 00 00 3D 00 00 00 36 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 66601][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 66602][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[ 66604][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 66604][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 66605][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 66605][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 66606][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 5 size: 9
[ 66606][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 66606][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4C
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x55
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4D
[ 66609][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x49
[ 66609][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 66610][I][z2s_devices_table.cpp:4437] Z2S_onCustomCmdReceive(): 54:EF:44:10:01:5D:75:8C, endpoint 0x1, cluster 0x0, cmd id 0x1
[ 66610][E][z2s_devices_table.cpp:59] no_channel_found_error_func(): No channel found for address 54:EF:44:10:01:5D:75:8C
[ 66611][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 66612][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 66612][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 66613][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 66613][I][ZigbeeGateway.cpp:702] zbReadBasicCluster(): Peer Manufacturer is "LUMI"
Recv: [53 55 50 4C 41 1B 0D 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0D 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AC 20 00 00 48 00 00 00 41 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0E 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0E 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AF 26 00 00 52 00 00 00 4B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0F 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0F 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AB 1E 00 00 5D 00 00 00 56 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 10 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 10 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 68 00 00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[106957][I][ZigbeeCore.cpp:474] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0xc321), rejoin (NO)
[108240][V][ZigbeeCore.cpp:492] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[108506][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[108507][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 50, cluster_id: 0x0013, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0xfffd, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[108508][I][ZigbeeCore.cpp:380] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x0832)
[108509][V][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Device capabilities: 0x84
[108509][I][z2s_devices_table.cpp:4968] Z2S_onBTCBoundDevice(): BTC bound device 54:EF:44:10:01:5D:75:8C (0x832) on endpoint(0x0), cluster id(0x0)
[108510][I][z2s_devices_table.cpp:4977] Z2S_onBTCBoundDevice(): zb_device_slot 255
[108510][I][z2s_devices_table.cpp:4981] Z2S_onBTCBoundDevice(): No ZbDevice - full registration required
[108795][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[108796][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0002, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[109123][I][ZigbeeCore.cpp:464] esp_zb_app_signal_handler(): Device 0x0832 authorized (status: 0, type: 1)
[109221][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[109221][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 50, cluster_id: 0x0036, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0xfffc, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[109223][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[109224][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[109224][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[109225][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[109225][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[109226][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
Recv: [53 55 50 4C 41 1B 11 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 11 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AA 1C 00 00 72 00 00 00 6B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[120008][I][Z2S_Gateway.ino:959] loop(): New UTC time 823977821, new local time 823977821
[120009][I][Z2S_Gateway.ino:991] loop():
Local Time Cluster Time status attribute 2
UTC time attribute 823977821
local time attribute 823977821
[120011][I][z2s_web_gui.cpp:977] fillMemoryUptimeInformation(): Memory & uptime information <b><i>Flash chip real size:</b></i> 16777216 B <b>| <i>Free Sketch Space:</b></i> 3407872 B<br><b><i>HeapSize:</b></i> 358364 B <b>| <i>FreeHeap:</b></i> 107664 B <b>| <i>MinimalFreeHeap:</b></i> 99140 B <b>| <i>MaxAllocHeap:</b></i> 92148 B<br><b><i>uxTaskGetStackHighWaterMark:</b></i> 3020 B <br><b><i>Total PSRAM:</b></i> 0 B <b>| <i>Free PSRAM:</b></i> 0 B<br><br><b><i>Local time:</i></b> Mon Feb  9 18:43:41 2026
                                     <b><i>Supla uptime:</i></b> 120 s
Recv: [53 55 50 4C 41 1B 12 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 12 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 7C 00 00 00 75 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Ups, zgubiłem "lumi." w nazwie - poprawka w 1.4.15-09/02/26.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
zlomar
Posts: 78
Joined: Sun Mar 19, 2017 3:11 pm
Has thanked: 1 time

Post

vajera wrote: Sun Feb 08, 2026 8:57 pm
zlomar wrote: Sun Feb 08, 2026 1:50 pm Proszę o dodanie nowego urządzenia

Unknown model SONOFF::MINI-ZB2GS-L, no binding is possible

Wiem że był już dodany podobny model Sonoff DUO-L,
mi bramka wykryła z dodatkiem "-L"
+BWNU: 1.4.10-08/02/26.
dziękuję za dodanie - tylko że wykrywa mi go jako 1 kanał a to jest SONOFF DUO z dwoma kanałami bez N, czy możesz zmodyfikować wpis tak aby był wykrywany jako dwa kanały ?
Top
QLQ
Posts: 2512
Joined: Sun Sep 03, 2017 9:13 am

Post

vajera wrote: Mon Feb 09, 2026 6:07 pm
QLQ wrote: Mon Feb 09, 2026 5:46 pm
vajera wrote: Sun Feb 08, 2026 8:44 pm

Cześć,
to jest dosyć rozbudowany model, więc będę potrzebował Twojej pomocy. Wersja 1.4.10-08/02/26 rozpozna ten czujnik, sparuje go i doda pewną ilość kanałów Supla, które póki co będą nieaktywne. Potrzebuje logi z procesu parowania czujnika i z kilku minut jego pracy, najlepiej z uwzględnieniem reakcji na przycisk TEST, jeżeli takowy posiada.
Urządzenie dalej nie loguje się do bramki. Komunikat w Last binding state j/w.

Log z putty:

Code: Select all

[     1][V][ZigbeeEP.cpp:22] ZigbeeEP(): Endpoint: 1
3 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 09 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 0                                                                                                                                                             0 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 1D                                                                                                                                                              00 00 00 16 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Button[0] pressed
Button[0] released
[ 39444][I][Z2S_Gateway.ino:160] supla_callback_bridge(): event(0x4), action(0x0)
[ 39445][V][ZigbeeCore.cpp:272] openNetwork(): Opening network for joining for 180 seconds
[ 39913][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[ 39914][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[ 39914][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 39915][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 39915][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 39916][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
Recv: [53 55 50 4C 41 1B 0A 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0A 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B5 32 00 00 28 00 00 00 21 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0B 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0B 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B6 34 00 00 32 00 00 00 2B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 53983][I][ZigbeeCore.cpp:474] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0xcf0b), rejoin (NO)
[ 55269][V][ZigbeeCore.cpp:492] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 55536][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55537][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0013, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0xfffd, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55539][I][ZigbeeCore.cpp:380] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xc321)
[ 55539][V][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Device capabilities: 0x84
[ 55540][I][z2s_devices_table.cpp:4968] Z2S_onBTCBoundDevice(): BTC bound device 54:EF:44:10:01:5D:75:8C (0xc321) on endpoint(0x0), cluster id(0x0)
[ 55541][I][z2s_devices_table.cpp:4977] Z2S_onBTCBoundDevice(): zb_device_slot 255
[ 55541][I][z2s_devices_table.cpp:4981] Z2S_onBTCBoundDevice(): No ZbDevice - full registration required
[ 55826][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55827][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0002, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55943][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 55944][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x8006, asdu_length: 6
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[ 55946][D][ZigbeeGateway.cpp:495] find_Cb(): BASIC cluster found: short address(0xc321), endpoint(1)
[ 55947][I][ZigbeeGateway.cpp:1092] printJoinedDevices(): joined devices:
[ 55947][I][ZigbeeGateway.cpp:1095] printJoinedDevices(): Device on endpoint 1, short address: 0xc321
[ 55948][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 55949][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 55949][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 55950][I][z2s_web_gui.cpp:3914] Z2S_stopWebGUI(): STOP WEB GUI
[ 55951][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 56474][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 56475][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 147, rx_time: 0
[ 56477][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 56477][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 56478][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 56478][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 56479][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 3 size: 9
[ 56479][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 56479][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 56480][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4C
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x55
[ 56481][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4D
[ 56482][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x49
[ 56482][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 56482][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 56483][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 56484][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 56484][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 56485][I][ZigbeeGateway.cpp:702] zbReadBasicCluster(): Peer Manufacturer is "LUMI"
[ 56953][I][ZigbeeGateway.cpp:643] zbQueryDeviceBasicCluster(): basic tsn 0x0
[ 56953][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[ 57052][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 57052][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 31
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[ 57054][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 57054][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 57055][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 57055][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 57056][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 11 size: 28
[ 57056][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x05
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 57057][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 57058][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x17
[ 57058][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6C
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x75
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6D
[ 57059][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x69
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2E
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57060][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x65
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6E
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57061][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x72
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x5F
[ 57062][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x73
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6D
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 57063][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6B
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x65
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2E
[ 57064][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x61
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x63
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6E
[ 57065][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x30
[ 57066][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x33
[ 57066][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 57067][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 57067][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 57068][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 57069][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(23)
[ 57069][I][ZigbeeGateway.cpp:712] zbReadBasicCluster(): Peer Model is "lumi.sensor_smoke.acn03"
[ 57078][I][ZigbeeCore.cpp:464] esp_zb_app_signal_handler(): Device 0xc321 authorized (status: 0, type: 1)
[ 57257][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 57257][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0036, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0xfffc, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 147, rx_time: 0
[ 57259][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[ 57260][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[ 57260][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 57261][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 57261][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 57262][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
[ 57954][I][ZigbeeGateway.cpp:643] zbQueryDeviceBasicCluster(): basic tsn 0x1
[ 57954][I][Z2S_Gateway.ino:1186] loop(): sizeof(Z2S_DEVICES_LIST) = 38760
[ 57956][D][Z2S_Gateway.ino:1854] loop(): Unknown model LUMI::lumi.sensor_smoke.acn03, no binding is possible
[ 57957][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 57957][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 57958][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 58959][I][z2s_web_gui.cpp:3902] Z2S_startWebGUI(): STOP WEB GUI
[ 58960][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16432, action 0
[ 60001][I][Z2S_Gateway.ino:959] loop(): New UTC time 823977761, new local time 823977761
[ 60002][I][Z2S_Gateway.ino:991] loop():
Local Time Cluster Time status attribute 2
UTC time attribute 823977761
local time attribute 823977761
[ 60004][I][z2s_web_gui.cpp:977] fillMemoryUptimeInformation(): Memory & uptime information <b><i>Flash chip real size:</b></i> 16777216 B <b>| <i>Free Sketch Space:</b></i> 3407872 B<br><b><i>HeapSize:</b></i> 358364 B <b>| <i>FreeHeap:</b></i> 107664 B <b>| <i>MinimalFreeHeap:</b></i> 99140 B <b>| <i>MaxAllocHeap:</b></i> 92148 B<br><b><i>uxTaskGetStackHighWaterMark:</b></i> 3020 B <br><b><i>Total PSRAM:</b></i> 0 B <b>| <i>Free PSRAM:</b></i> 0 B<br><br><b><i>Local time:</i></b> Mon Feb  9 18:42:41 2026
                                     <b><i>Supla uptime:</i></b> 60 s
Recv: [53 55 50 4C 41 1B 0C 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0C 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 B6 34 00 00 3D 00 00 00 36 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 66601][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 66602][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xc321
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 153, rx_time: 0
[ 66604][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 66604][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 66605][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 66605][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 66606][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 5 size: 9
[ 66606][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 66606][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 66607][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4C
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x55
[ 66608][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4D
[ 66609][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x49
[ 66609][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xc321, 0xc321, 0x0, 0x0
[ 66610][I][z2s_devices_table.cpp:4437] Z2S_onCustomCmdReceive(): 54:EF:44:10:01:5D:75:8C, endpoint 0x1, cluster 0x0, cmd id 0x1
[ 66610][E][z2s_devices_table.cpp:59] no_channel_found_error_func(): No channel found for address 54:EF:44:10:01:5D:75:8C
[ 66611][I][ZigbeeHandlers.cpp:189] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 66612][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 66612][V][ZigbeeHandlers.cpp:260] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xc321) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 66613][V][ZigbeeHandlers.cpp:268] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 66613][I][ZigbeeGateway.cpp:702] zbReadBasicCluster(): Peer Manufacturer is "LUMI"
Recv: [53 55 50 4C 41 1B 0D 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0D 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AC 20 00 00 48 00 00 00 41 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0E 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0E 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AF 26 00 00 52 00 00 00 4B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 0F 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 0F 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AB 1E 00 00 5D 00 00 00 56 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 1B 10 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 10 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 68 00 00 00 61 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[106957][I][ZigbeeCore.cpp:474] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0xc321), rejoin (NO)
[108240][V][ZigbeeCore.cpp:492] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[108506][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[108507][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 50, cluster_id: 0x0013, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0xfffd, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[108508][I][ZigbeeCore.cpp:380] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x0832)
[108509][V][ZigbeeCore.cpp:384] esp_zb_app_signal_handler(): Device capabilities: 0x84
[108509][I][z2s_devices_table.cpp:4968] Z2S_onBTCBoundDevice(): BTC bound device 54:EF:44:10:01:5D:75:8C (0x832) on endpoint(0x0), cluster id(0x0)
[108510][I][z2s_devices_table.cpp:4977] Z2S_onBTCBoundDevice(): zb_device_slot 255
[108510][I][z2s_devices_table.cpp:4981] Z2S_onBTCBoundDevice(): No ZbDevice - full registration required
[108795][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[108796][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0002, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[109123][I][ZigbeeCore.cpp:464] esp_zb_app_signal_handler(): Device 0x0832 authorized (status: 0, type: 1)
[109221][D][ZigbeeCore.cpp:504] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[109221][D][ZigbeeCore.cpp:508] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 50, cluster_id: 0x0036, asdu_length: 3
APSDE INDICATION - dst_short_addr: 0xfffc, src_short_addr: 0x0832
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 153, rx_time: 0
[109223][I][ZigbeeCore.cpp:437] esp_zb_app_signal_handler(): Network(0x73e2) is open for 180 seconds
[109224][I][Z2S_Gateway.ino:289] Z2S_onOpenNetwork(): Network open for 180 s
[109224][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[109225][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[109225][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[109226][I][Z2S_local_action_handlers.cpp:275] handleAction(): &&&&&&&&&&&&&&&&&&&&&&&&&&event 16417, action 0
Recv: [53 55 50 4C 41 1B 11 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 11 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AA 1C 00 00 72 00 00 00 6B 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[120008][I][Z2S_Gateway.ino:959] loop(): New UTC time 823977821, new local time 823977821
[120009][I][Z2S_Gateway.ino:991] loop():
Local Time Cluster Time status attribute 2
UTC time attribute 823977821
local time attribute 823977821
[120011][I][z2s_web_gui.cpp:977] fillMemoryUptimeInformation(): Memory & uptime information <b><i>Flash chip real size:</b></i> 16777216 B <b>| <i>Free Sketch Space:</b></i> 3407872 B<br><b><i>HeapSize:</b></i> 358364 B <b>| <i>FreeHeap:</b></i> 107664 B <b>| <i>MinimalFreeHeap:</b></i> 99140 B <b>| <i>MaxAllocHeap:</b></i> 92148 B<br><b><i>uxTaskGetStackHighWaterMark:</b></i> 3020 B <br><b><i>Total PSRAM:</b></i> 0 B <b>| <i>Free PSRAM:</b></i> 0 B<br><br><b><i>Local time:</i></b> Mon Feb  9 18:43:41 2026
                                     <b><i>Supla uptime:</i></b> 120 s
Recv: [53 55 50 4C 41 1B 12 00 00 00 F4 01 00 00 08 00 00 00 00 00 00 00 6E 60 00 00 53 55 50 4C 41 ]
Send: [53 55 50 4C 41 1B 12 00 00 00 FE 01 00 00 32 00 00 00 00 00 00 00 6E 00 00 00 B3 01 00 00 00 00 00 00 C0 A8 01 50 98 A3 16 96 C4 D0 00 00 AD 22 00 00 7C 00 00 00 75 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Ups, zgubiłem "lumi." w nazwie - poprawka w 1.4.15-09/02/26.
Masakra - prawie 10 urządzeń !
.
od 120007 wciskam guzik na urządzeniu
Log w rar bo za dużo lini
Clip_2.png
You do not have the required permissions to view the files attached to this post.
Last edited by QLQ on Tue Feb 10, 2026 2:33 pm, edited 1 time in total.
jak coś nie działa to włącz zasilanie.....
Top
smky95
Posts: 7
Joined: Thu Dec 18, 2025 7:46 am

Post

Dzień dobry, chciałbym prosić o dodanie włącznika światła.

Image
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

zlomar wrote: Mon Feb 09, 2026 7:04 pm
vajera wrote: Sun Feb 08, 2026 8:57 pm
zlomar wrote: Sun Feb 08, 2026 1:50 pm Proszę o dodanie nowego urządzenia

Unknown model SONOFF::MINI-ZB2GS-L, no binding is possible

Wiem że był już dodany podobny model Sonoff DUO-L,
mi bramka wykryła z dodatkiem "-L"
+BWNU: 1.4.10-08/02/26.
dziękuję za dodanie - tylko że wykrywa mi go jako 1 kanał a to jest SONOFF DUO z dwoma kanałami bez N, czy możesz zmodyfikować wpis tak aby był wykrywany jako dwa kanały ?
Poprawiłem w 1.4.16-09/02/26 - niestety wymaga to usunięcia urządzenia.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
Robert Błaszczak
Posts: 5222
Joined: Sat Dec 22, 2018 8:55 pm
Location: Zielona Góra
Has thanked: 37 times
Been thanked: 27 times

Post

smky95 wrote: Mon Feb 09, 2026 9:00 pm Dzień dobry, chciałbym prosić o dodanie włącznika światła.

Image
Skopiuj i wklej tekst, a nie każ komuś przepisywać ze zdjęcia. To zdaje się Ty masz interes...
Pozdrawiam
Robert Błaszczak

Moja prywatna strona: www.blaszczak.pl
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

Robert Błaszczak wrote: Mon Feb 09, 2026 9:05 pm
smky95 wrote: Mon Feb 09, 2026 9:00 pm Dzień dobry, chciałbym prosić o dodanie włącznika światła.

Image
Skopiuj i wklej tekst, a nie każ komuś przepisywać ze zdjęcia. To zdaje się Ty masz interes...
Szczególnie, że jest już w bazie od: 1.3.26-30/01/26 :lol:
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

mlynoza wrote: Mon Feb 09, 2026 5:15 pm
vajera wrote: Mon Feb 09, 2026 11:50 am
mlynoza wrote: Mon Feb 09, 2026 9:23 am Witam.

Poproszę o dodanie nowego urządzenia

Sterownik rolet MOES MS-108ZR

Unknown model _TZ3000_1dd0d5yi::TS130F, no binding is possible
+BWNU: 1.4.13-09/02/26
Urządzenie dodane, działa poprawnie na przyciski fizyczne jak i w aplikacji.
Procenty i animacje przy przyciskach fizycznych i chwilowych OK. Ale brak animacji i procentów przy przyciskach całkowitego zamknięcia i otwarcia. Można temu zaradzić???
Mam podobny moduł i on tak ma - jak dostanie rozkaz idź do XX%, to nie wyświetla wartości pośrednich. Ewentualnie możesz zebrać logi, ale sądzę, że to jest ta przypadłość.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top

Return to “Bramka ZigBee”