A mógłbyś mi pomoc poprawnie zaadresować gpio dla licznika 3fazowego w przykładzie z biblioteki supladevice? Spróbuję to skompilować.
Code: Select all
/*
Copyright (C) AC SOFTWARE SP. Z O.O.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
// dependence: Arduino library for the Updated PZEM-004T v3.0 Power and Energy
// meter https://github.com/mandulaj/PZEM-004T-v30
#include <SuplaDevice.h>
#include <supla/sensor/PzemV3.h>
// Choose proper network interface for your card:
#ifdef ARDUINO_ARCH_AVR
// Arduino Mega with EthernetShield W5100:
#include <supla/network/ethernet_shield.h>
// Ethernet MAC address
uint8_t mac[6] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05};
Supla::EthernetShield ethernet(mac);
// Arduino Mega with ENC28J60:
// #include <supla/network/ENC28J60.h>
// Supla::ENC28J60 ethernet(mac);
#elif defined(ARDUINO_ARCH_ESP8266) || defined(ARDUINO_ARCH_ESP32)
// ESP8266 and ESP32 based board:
#include <supla/network/esp_wifi.h>
Supla::ESPWifi wifi("your_wifi_ssid", "your_wifi_password");
#endif
void setup() {
Serial.begin(115200);
// Replace the falowing GUID with value that you can retrieve from
// https://www.supla.org/arduino/get-guid
char GUID[SUPLA_GUID_SIZE] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
// Replace the following AUTHKEY with value that you can retrieve from:
// https://www.supla.org/arduino/get-authkey
char AUTHKEY[SUPLA_AUTHKEY_SIZE] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
/*
* Having your device already registered at cloud.supla.org,
* you want to change CHANNEL sequence or remove any of them,
* then you must also remove the device itself from cloud.supla.org.
* Otherwise you will get "Channel conflict!" error.
*/
new Supla::Sensor::PZEMv3(5, 4); // (RX,TX) "PZEM Addr default to 0xF8"
// new Supla::Sensor::PZEMv3(5, 4, 0x10); // (RX,TX, PZEM Addr)
/*
* SuplaDevice Initialization.
* Server address, is available at https://cloud.supla.org
* If you do not have an account, you can create it at
* https://cloud.supla.org/account/create SUPLA and SUPLA CLOUD are free of
* charge
*
*/
SuplaDevice.begin(
GUID, // Global Unique Identifier
"svr1.supla.org", // SUPLA server address
"email@address", // Email address used to login to Supla Cloud
AUTHKEY); // Authorization key
}
void loop() {
SuplaDevice.iterate();
}
? najlepiej z zaznaczonymi dodatkowymi opcjami. Pilnie potrzebuje uruchomić ten licznik z dodatkowymi kanałami : termometrem, krańcówką i przekaźnikiem ( taki mam hardware).