Zgłoszenia nowych urządzeń [bramka Zigbee]

Moderator: vajera

User avatar
Mario78
Posts: 409
Joined: Fri Jan 05, 2024 6:18 am
Location: Śląsk
Been thanked: 1 time

Post

vajera wrote: Wed May 14, 2025 1:17 pm
Mario78 wrote: Tue May 13, 2025 6:49 pm vajera uprzejmie proszę o dodanie czujnika ruchu
Peer Model is "SNZB-03" Manufacturer is "_TZ3000_bb6xaihh"
A jesteś pewny tych danych - wygląda to trochę jak krzyżówka Sonoffa z Tuya?
vajera wygląda, że log są ok
poniżej wklejam całość z próby parowania

czujnik z linu : https://pl.aliexpress.com/item/10050084 ... pt=glo2pol

Code: Select all

Using 'COM14' as serial port.
Unexpected error: could not open port 'COM14': PermissionError(13, 'Odmowa dostępu.', None, 5)
[19:26:55]Send: [53 55 50 4C 41 17 06 00 00 00 28 00 00 00 10 00 00 00 7E EE 24 68 00 00 00 00 96 C1 0E 00 00 00 00 00 ]
[19:26:55]Send: [53 55 50 4C 41 ]
[19:26:55]Recv: [53 55 50 4C 41 17 07 00 00 00 32 00 00 00 10 00 00 00 5F D2 24 68 00 00 00 00 4D 5F 0D 00 00 00 00 00 53 55 50 4C 41 ]
[19:27:01][ 35235][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xd22d)
[19:27:01][ 35235][D][ZigbeeGateway.cpp:517] zbDeviceAnnce(): zbDeviceAnnce short address (0xd22d), ieee_addr (0xa4):(0xc1):(0x38):(0x30):(0xef):(0x8):(0x4f):(0xab)
[19:27:01][ 35236][D][ZigbeeGateway.cpp:520] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0xd22d), ieee_addr (0xa4):(0xc1):(0x38):(0x30):(0xef):(0x8):(0x4f):(0xab)
[19:27:01][ 35237][I][ZigbeeGateway.cpp:544] zbDeviceAnnce(): Tuya magic last hope
[19:27:01][ 35440][I][ZigbeeGateway.cpp:587] printJoinedDevices(): joined devices:
[19:27:01][ 35441][I][ZigbeeGateway.cpp:590] printJoinedDevices(): Device on endpoint 1, short address: 0xd22d
[19:27:01][ 35442][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[19:27:01][ 35574][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:01][ 35574][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_bb6xaihh"
[19:27:01][ 35575][I][ZigbeeGateway.cpp:401] zbReadBasicCluster(): ZCL version id is "3"
[19:27:01][ 35575][I][ZigbeeGateway.cpp:407] zbReadBasicCluster(): ZCL application version id is "113"
[19:27:01][ 35576][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "SNZB-03"
[19:27:01][ 35576][I][ZigbeeGateway.cpp:413] zbReadBasicCluster(): ZCL power source id is "3"
[19:27:01][ 35641][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:01][ 35642][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_bb6xaihh"
[19:27:02][ 35942][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x1
[19:27:02][ 35942][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[19:27:02][ 36064][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:02][ 36065][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "SNZB-03"
[19:27:02][ 36444][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x2
[19:27:02][ 36444][I][ZigbeeGateway.cpp:1225] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[19:27:02][ 36571][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[19:27:03][ 36776][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:03][ 36776][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36777][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36778][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36779][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36779][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36780][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:03][ 36946][I][ZigbeeGateway.cpp:1225] sendAttributeWrite(): Sending 'write attribute' command - id (0x9), type (0x20), size (0x1), value (0x1)
[19:27:03][ 37083][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[19:27:03][ 37448][D][Z2S_Gateway.ino:1655] loop(): Unknown model _TZ3000_bb6xaihh::SNZB-03, no binding is possible
[19:27:04][ 37677][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:04][ 37678][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37678][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37679][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37680][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37681][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37681][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:06][ 40070][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:06][ 40070][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40071][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40072][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40072][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40073][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40074][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:07][ 41055][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:07][ 41056][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41057][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41057][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41058][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41059][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41060][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:11][ 44861][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:11][ 44861][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44862][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44863][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44864][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44865][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44865][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Mario78 wrote: Wed May 14, 2025 5:33 pm
vajera wrote: Wed May 14, 2025 1:17 pm
Mario78 wrote: Tue May 13, 2025 6:49 pm vajera uprzejmie proszę o dodanie czujnika ruchu
Peer Model is "SNZB-03" Manufacturer is "_TZ3000_bb6xaihh"
A jesteś pewny tych danych - wygląda to trochę jak krzyżówka Sonoffa z Tuya?
vajera wygląda, że log są ok
poniżej wklejam całość z próby parowania

czujnik z linu : https://pl.aliexpress.com/item/10050084 ... pt=glo2pol

Code: Select all

Using 'COM14' as serial port.
Unexpected error: could not open port 'COM14': PermissionError(13, 'Odmowa dostępu.', None, 5)
[19:26:55]Send: [53 55 50 4C 41 17 06 00 00 00 28 00 00 00 10 00 00 00 7E EE 24 68 00 00 00 00 96 C1 0E 00 00 00 00 00 ]
[19:26:55]Send: [53 55 50 4C 41 ]
[19:26:55]Recv: [53 55 50 4C 41 17 07 00 00 00 32 00 00 00 10 00 00 00 5F D2 24 68 00 00 00 00 4D 5F 0D 00 00 00 00 00 53 55 50 4C 41 ]
[19:27:01][ 35235][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xd22d)
[19:27:01][ 35235][D][ZigbeeGateway.cpp:517] zbDeviceAnnce(): zbDeviceAnnce short address (0xd22d), ieee_addr (0xa4):(0xc1):(0x38):(0x30):(0xef):(0x8):(0x4f):(0xab)
[19:27:01][ 35236][D][ZigbeeGateway.cpp:520] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0xd22d), ieee_addr (0xa4):(0xc1):(0x38):(0x30):(0xef):(0x8):(0x4f):(0xab)
[19:27:01][ 35237][I][ZigbeeGateway.cpp:544] zbDeviceAnnce(): Tuya magic last hope
[19:27:01][ 35440][I][ZigbeeGateway.cpp:587] printJoinedDevices(): joined devices:
[19:27:01][ 35441][I][ZigbeeGateway.cpp:590] printJoinedDevices(): Device on endpoint 1, short address: 0xd22d
[19:27:01][ 35442][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[19:27:01][ 35574][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:01][ 35574][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_bb6xaihh"
[19:27:01][ 35575][I][ZigbeeGateway.cpp:401] zbReadBasicCluster(): ZCL version id is "3"
[19:27:01][ 35575][I][ZigbeeGateway.cpp:407] zbReadBasicCluster(): ZCL application version id is "113"
[19:27:01][ 35576][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "SNZB-03"
[19:27:01][ 35576][I][ZigbeeGateway.cpp:413] zbReadBasicCluster(): ZCL power source id is "3"
[19:27:01][ 35641][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:01][ 35642][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_bb6xaihh"
[19:27:02][ 35942][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x1
[19:27:02][ 35942][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[19:27:02][ 36064][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:02][ 36065][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "SNZB-03"
[19:27:02][ 36444][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x2
[19:27:02][ 36444][I][ZigbeeGateway.cpp:1225] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[19:27:02][ 36571][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[19:27:03][ 36776][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:03][ 36776][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36777][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36778][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36779][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36779][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36780][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:03][ 36946][I][ZigbeeGateway.cpp:1225] sendAttributeWrite(): Sending 'write attribute' command - id (0x9), type (0x20), size (0x1), value (0x1)
[19:27:03][ 37083][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[19:27:03][ 37448][D][Z2S_Gateway.ino:1655] loop(): Unknown model _TZ3000_bb6xaihh::SNZB-03, no binding is possible
[19:27:04][ 37677][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:04][ 37678][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37678][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37679][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37680][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37681][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37681][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:06][ 40070][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:06][ 40070][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40071][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40072][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40072][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40073][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40074][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:07][ 41055][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:07][ 41056][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41057][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41057][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41058][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41059][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41060][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:11][ 44861][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:11][ 44861][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44862][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44863][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44864][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44865][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44865][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
Faktycznie - manufacturer name w stylu Tuya a model Sonoffa - pytanie kto to komu i co podprowadził 😉
Nic dziwnego, że ludzie się skarżą w komentarzach na problemy z parowaniem.
Dodam go z tym samym profilem, co w przypadku eWeLink::SNZB-03 tylko zmienię to manufacturer name i zobaczymy czy działa.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
Mario78
Posts: 409
Joined: Fri Jan 05, 2024 6:18 am
Location: Śląsk
Been thanked: 1 time

Post

Chinczyk Cinczyka okrada .....Co to się dzieje na tym świecie :D
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

vajera wrote: Wed May 14, 2025 5:42 pm
Mario78 wrote: Wed May 14, 2025 5:33 pm
vajera wrote: Wed May 14, 2025 1:17 pm

A jesteś pewny tych danych - wygląda to trochę jak krzyżówka Sonoffa z Tuya?
vajera wygląda, że log są ok
poniżej wklejam całość z próby parowania

czujnik z linu : https://pl.aliexpress.com/item/10050084 ... pt=glo2pol

Code: Select all

Using 'COM14' as serial port.
Unexpected error: could not open port 'COM14': PermissionError(13, 'Odmowa dostępu.', None, 5)
[19:26:55]Send: [53 55 50 4C 41 17 06 00 00 00 28 00 00 00 10 00 00 00 7E EE 24 68 00 00 00 00 96 C1 0E 00 00 00 00 00 ]
[19:26:55]Send: [53 55 50 4C 41 ]
[19:26:55]Recv: [53 55 50 4C 41 17 07 00 00 00 32 00 00 00 10 00 00 00 5F D2 24 68 00 00 00 00 4D 5F 0D 00 00 00 00 00 53 55 50 4C 41 ]
[19:27:01][ 35235][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xd22d)
[19:27:01][ 35235][D][ZigbeeGateway.cpp:517] zbDeviceAnnce(): zbDeviceAnnce short address (0xd22d), ieee_addr (0xa4):(0xc1):(0x38):(0x30):(0xef):(0x8):(0x4f):(0xab)
[19:27:01][ 35236][D][ZigbeeGateway.cpp:520] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0xd22d), ieee_addr (0xa4):(0xc1):(0x38):(0x30):(0xef):(0x8):(0x4f):(0xab)
[19:27:01][ 35237][I][ZigbeeGateway.cpp:544] zbDeviceAnnce(): Tuya magic last hope
[19:27:01][ 35440][I][ZigbeeGateway.cpp:587] printJoinedDevices(): joined devices:
[19:27:01][ 35441][I][ZigbeeGateway.cpp:590] printJoinedDevices(): Device on endpoint 1, short address: 0xd22d
[19:27:01][ 35442][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[19:27:01][ 35574][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:01][ 35574][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_bb6xaihh"
[19:27:01][ 35575][I][ZigbeeGateway.cpp:401] zbReadBasicCluster(): ZCL version id is "3"
[19:27:01][ 35575][I][ZigbeeGateway.cpp:407] zbReadBasicCluster(): ZCL application version id is "113"
[19:27:01][ 35576][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "SNZB-03"
[19:27:01][ 35576][I][ZigbeeGateway.cpp:413] zbReadBasicCluster(): ZCL power source id is "3"
[19:27:01][ 35641][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:01][ 35642][I][ZigbeeGateway.cpp:381] zbReadBasicCluster(): Peer Manufacturer is "_TZ3000_bb6xaihh"
[19:27:02][ 35942][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x1
[19:27:02][ 35942][I][ZigbeeGateway.cpp:348] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[19:27:02][ 36064][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[19:27:02][ 36065][I][ZigbeeGateway.cpp:388] zbReadBasicCluster(): Peer Model is "SNZB-03"
[19:27:02][ 36444][I][ZigbeeGateway.cpp:354] zbQueryDeviceBasicCluster(): basic tsn 0x2
[19:27:02][ 36444][I][ZigbeeGateway.cpp:1225] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[19:27:02][ 36571][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[19:27:03][ 36776][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:03][ 36776][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36777][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36778][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36779][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36779][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:03][ 36780][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:03][ 36946][I][ZigbeeGateway.cpp:1225] sendAttributeWrite(): Sending 'write attribute' command - id (0x9), type (0x20), size (0x1), value (0x1)
[19:27:03][ 37083][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[19:27:03][ 37448][D][Z2S_Gateway.ino:1655] loop(): Unknown model _TZ3000_bb6xaihh::SNZB-03, no binding is possible
[19:27:04][ 37677][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:04][ 37678][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37678][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37679][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37680][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37681][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:04][ 37681][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:06][ 40070][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:06][ 40070][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40071][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40072][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40072][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40073][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:06][ 40074][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:07][ 41055][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:07][ 41056][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41057][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41057][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41058][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41059][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:07][ 41060][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
[19:27:11][ 44861][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1031) callback
[19:27:11][ 44861][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44862][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44863][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44864][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44865][I][z2s_devices_table.cpp:98] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab, endpoint 0x1, channel type 0x3e8
[19:27:11][ 44865][I][z2s_devices_table.cpp:1116] Z2S_onIASzoneStatusChangeNotification(): onIASzoneStatusChangeNotification - no channel found for address 0xa4:0xc1:0x38:0x30:0xef:0x8:0x4f:0xab
Faktycznie - manufacturer name w stylu Tuya a model Sonoffa - pytanie kto to komu i co podprowadził 😉
Nic dziwnego, że ludzie się skarżą w komentarzach na problemy z parowaniem.
Dodam go z tym samym profilem, co w przypadku eWeLink::SNZB-03 tylko zmienię to manufacturer name i zobaczymy czy działa.
Do mnie też idzie z tego linku. Jak dojdzie, to zobaczę, jak się będzie przedstawiał ;-)
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
Mario78
Posts: 409
Joined: Fri Jan 05, 2024 6:18 am
Location: Śląsk
Been thanked: 1 time

Post

Zibi_007 w tej cenie to się majfrendom nawet nazwy modelu nie chce zmieniać :lol:
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Znając życie to ten sam soft idzie do różnych czujników tylko ktoś zmienił jedną linijkę a miał poprawić dwie :D

Ps. W każdym razie ta chimera jest już w 0.7.81.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
Mario78
Posts: 409
Joined: Fri Jan 05, 2024 6:18 am
Location: Śląsk
Been thanked: 1 time

Post

vajera wrote: Wed May 14, 2025 5:54 pm Znając życie to ten sam soft idzie do różnych czujników tylko ktoś zmienił jedną linijkę a miał poprawić dwie :D

Ps. W każdym razie ta chimera jest już w 0.7.81.
kurde działa :)
i nawet szybko śmiga lepiej niz czujniki ikea
You do not have the required permissions to view the files attached to this post.
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Mario78 wrote: Wed May 14, 2025 6:17 pm kurde działa :)
i nawet szybko śmiga lepiej niz czujniki ikea
Trochę jak z psami - mieszaniec sprawniejszy od rasowego :D
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

vajera wrote: Wed May 14, 2025 7:34 pm
Mario78 wrote: Wed May 14, 2025 6:17 pm kurde działa :)
i nawet szybko śmiga lepiej niz czujniki ikea
Trochę jak z psami - mieszaniec sprawniejszy od rasowego :D
Już o tym pisałem. Jeśli zadziałają, to nie ma się do czego przyczepić. Działają szybko, sprawnie i mało zużywają baterię (szczególnie jeśli są na CR2450 - pomijam już fakt, że taka markowa bateria potrafi kosztować prawie tyle, co ten czujnik :lol: ). Gorzej, jak nie działa. Rozebrałem kilka i wychodzi na to, że najczęściej nie działa sensor, albo uszkodzony jest układ scalony. Przy cenie kilku-kilkunastu złotych za nowy naprawa jest kompletnie nieopłacalna. Przy jednym, który zużywał bardzo szybko baterię znalazłem zwarcie na płytce (przelana cyna na sąsiedni pad). Inne (uszkodzone) wrzuciłem do elektrośmieci.
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Zibi_007 wrote: Wed May 14, 2025 8:39 pm Już o tym pisałem. Jeśli zadziałają, to nie ma się do czego przyczepić. Działają szybko, sprawnie i mało zużywają baterię (szczególnie jeśli są na CR2450 - pomijam już fakt, że taka markowa bateria potrafi kosztować prawie tyle, co ten czujnik :lol: ). Gorzej, jak nie działa. Rozebrałem kilka i wychodzi na to, że najczęściej nie działa sensor, albo uszkodzony jest układ scalony. Przy cenie kilku-kilkunastu złotych za nowy naprawa jest kompletnie nieopłacalna. Przy jednym, który zużywał bardzo szybko baterię znalazłem zwarcie na płytce (przelana cyna na sąsiedni pad). Inne (uszkodzone) wrzuciłem do elektrośmieci.
Może oni mają taki system, że Sonoff kupuje partię czujników za grosze, później robi kontrolę jakości i te, które ją przeszły idą już jako markowe?
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top

Return to “Bramka ZigBee”