Tez polecam. Mach ich juz z 10. Jednym nawet schodowke ogarnolem sobie. To jedno z 1 urządzeń dodanych do bramkibokk wrote: Mon Jun 30, 2025 9:34 amJest dodany do bramki I działa bardzo dobrzeprzemekbial wrote: Mon Jun 30, 2025 9:30 am Hej. Proszę o informację czy https://allegro.pl/oferta/sonoff-zbmini ... 0bez%2520n jest już dodany i obsługiwany przez bramkę? Pozdrawiam
Zgłoszenia nowych urządzeń [bramka Zigbee]
Moderator: vajera
-
Mario78
- Posts: 409
- Joined: Fri Jan 05, 2024 6:18 am
- Location: Śląsk
- Been thanked: 1 time
Witam, doszło mi kilka urzadzeń 
Na początek proszę o dodanie żarówki Gui10 od Sonoff
Edit1. Czujnik Temp Sonoff
Manufacturer - Sonoff
Model - SNZB-02LD
Edit2. Smart Knob
Peer Manufacturer is "_TZ3000_qja6nq5z"
Peer Model is "TS004F"
Na początek proszę o dodanie żarówki Gui10 od Sonoff
Code: Select all
cpp:388] esp_zb_app_signal_handler(): Network(0x9dab) is open for 180 seconds
[155771][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[155774][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[155958][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x7bdc)
[155959][V][ZigbeeCore.cpp:359] esp_zb_app_signal_handler(): Device capabilities: 0x8e
[155959][D][ZigbeeGateway.cpp:518] zbDeviceAnnce(): zbDeviceAnnce short address (0x7bdc), ieee_addr (0xb4):(0xe8):(0x42):(0x8d):(0x9c):(0x3e):(0x0):(0x0)
[155960][D][ZigbeeGateway.cpp:521] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x7bdc), ieee_addr (0xb4):(0xe8):(0x42):(0x8d):(0x9c):(0x3e):(0x0):(0x0)
[155961][I][ZigbeeGateway.cpp:545] zbDeviceAnnce(): Tuya magic last hope
[156206][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 11
[156206][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[156207][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 1
[156207][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0xdca
[156207][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 16 size: 2
[156208][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00
[156208][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0xC3
[156208][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x7bdc, 0x7bdc, 0x0, 0x0
[156209][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[156211][I][ZigbeeGateway.cpp:588] printJoinedDevices(): joined devices:
[156212][I][ZigbeeGateway.cpp:591] printJoinedDevices(): Device on endpoint 1, short address: 0x7bdc
[156255][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1005) callback
[156255][V][ZigbeeHandlers.cpp:275] zb_cmd_default_resp_handler(): Received default response: from address(0x7bdc), src_endpoint(1) to dst_endpoint(1), cluster(0xef00) for command (0x3) with status 0x0
[156256][V][ZigbeeHandlers.cpp:279] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[156256][I][ZigbeeGateway.cpp:1617] zbCmdDefaultResponse(): tsn = 1, _custom_cmd_last_tsn = 1, _custom_cmd_last_tsn_flag = 255
[156257][I][ZigbeeGateway.cpp:1630] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn = 1, _custom_cmd_last_tsn_flag = 255
[156258][I][ZigbeeGateway.cpp:1632] zbCmdDefaultResponse(): custom cmd rssi -94
[156412][I][ZigbeeGateway.cpp:1666] sendCustomClusterCmd(): _custom_cmd_last_tsn = 1
[156604][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[156612][I][ZigbeeGateway.cpp:1674] sendCustomClusterCmd(): _custom_cmd_last_tsn_flag = 2
[156613][I][ZigbeeGateway.cpp:349] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[156682][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[156683][V][ZigbeeHandlers.cpp:155] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7bdc) src endpoint(1) to dst endpoint(1) cluster(0x0)
[156684][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(7)
[156684][I][ZigbeeGateway.cpp:382] zbReadBasicCluster(): Peer Manufacturer is "eWeLink"
[157113][I][ZigbeeGateway.cpp:355] zbQueryDeviceBasicCluster(): basic tsn 0x2
[157114][I][ZigbeeGateway.cpp:349] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[157161][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[157161][V][ZigbeeHandlers.cpp:155] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x7bdc) src endpoint(1) to dst endpoint(1) cluster(0x0)
[157162][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(31)
[157163][I][ZigbeeGateway.cpp:389] zbReadBasicCluster(): Peer Model is "CK-BL702-AL-01(7009_Z102LG03-1)"
[157614][I][ZigbeeGateway.cpp:355] zbQueryDeviceBasicCluster(): basic tsn 0x3
[157615][I][ZigbeeGateway.cpp:1261] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[157655][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[157655][V][ZigbeeHandlers.cpp:191] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x7bdc) src endpoint(1) to dst endpoint(1) cluster(0x0)
[157656][V][ZigbeeHandlers.cpp:198] zb_cmd_write_attr_resp_handler(): Write attribute response: status(0), cluster(0x0), attribute(0xffff)
[158115][I][ZigbeeGateway.cpp:308] zbPrintDeviceDiscovery(): short_addr_req 31708
NLME Status Indication, status: 0x9
NLME Status Indication, status: 0x9
[158228][I][ZigbeeGateway.cpp:242] Z2S_active_ep_req_cb(): Z2S active_ep_req: device address 31708, endpoints count 2
[158228][I][ZigbeeGateway.cpp:245] Z2S_active_ep_req_cb(): Endpont # 1, id 1
[158229][I][ZigbeeGateway.cpp:245] Z2S_active_ep_req_cb(): Endpont # 2, id 242
NLME Status Indication, status: 0x9
[158599][I][ZigbeeGateway.cpp:261] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: device address 31708, endpoint # 1
[158599][I][ZigbeeGateway.cpp:262] Z2S_simple_desc_req_cb(): Z2S simple_desc_req: in clusters # 11, out clusters # 1
[158600][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 1, id 0
[158601][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 2, id 3
[158601][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 3, id 4
[158601][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 4, id 5
[158602][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 5, id 6
[158602][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 6, id 8
[158603][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 7, id 768
[158603][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 8, id 4096
[158603][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 9, id 61184
[158604][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 10, id 64529
[158604][I][ZigbeeGateway.cpp:266] Z2S_simple_desc_req_cb(): In cluster # 11, id 64599
[158605][I][ZigbeeGateway.cpp:281] Z2S_simple_desc_req_cb(): Out cluster # 1, id 25
[158760][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[158790][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[158820][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[158845][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[158876][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[158901][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[158932][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[158958][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[159248][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[161692][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[161724][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1004) callback
[161748][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x19, command id: 11
[161748][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[161749][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 1
[161749][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x6
[161750][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 8 size: 2
[161750][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x0C
[161750][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0xC3
[161751][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x7bdc, 0x7bdc, 0x0, 0x0
[161751][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed----------------------------------------------------------Manufacturer - Sonoff
Model - SNZB-02LD
Edit2. Smart Knob
Peer Manufacturer is "_TZ3000_qja6nq5z"
Peer Model is "TS004F"
-
Pietras81
- Posts: 2409
- Joined: Sun Feb 17, 2019 6:56 am
- Location: Osielsko
- Been thanked: 1 time
NIe wiem czy coś da się z tego wyczytać. Czujniki temperatury
Code: Select all
[ 1][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinee TX power: 20
[ 10034][I][Z2S_Gateway.ino:1463] loop(): getZbgDeviceUnitLastSeenMs 0, current millis 10034
PowerCycle: timeout, counter reset to 0
LittleFsConfig: writing to file "/supla-dev.cfg"
LittleFsConfig: writing to file "/supla-dev.cfg.bak"
Send: [53 55 50 4C 41 17 31 00 00 00 28 00 00 00 10 00 00 00 8A 0F 64 68 00 00 0 0 00 86 25 0F 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 32 00 00 00 32 00 00 00 10 00 00 00 6C F3 63 68 00 00 0 0 00 0F 0E 00 00 00 00 00 00 53 55 50 4C 41 ]
[ 47230][I][ZigbeeCore.cpp:406] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0x7df0), rejoin (NO)
[ 53621][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[ 53625][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[ 54140][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x2861)
[ 54141][V][ZigbeeCore.cpp:359] esp_zb_app_signal_handler(): Device capabilities: 0x80
[ 54141][D][ZigbeeGateway.cpp:518] zbDeviceAnnce(): zbDeviceAnnce short address (0x2861), ieee_addr (0xa4):(0xc1):(0x38):(0xdb):(0xd2):(0xf6):(0x88):(0x89)
[ 54142][D][ZigbeeGateway.cpp:521] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x2861), ieee_addr (0xa4):(0xc1):(0x38):(0xdb):(0xd2):(0xf6):(0x88):(0x89)
[ 54143][I][ZigbeeGateway.cpp:545] zbDeviceAnnce(): Tuya magic last hope
[ 54346][I][ZigbeeGateway.cpp:588] printJoinedDevices(): joined devices:
[ 54347][I][ZigbeeGateway.cpp:591] printJoinedDevices(): Device on endpoint 1, short address: 0x2861
[ 54348][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 54348][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO
[ 54349][I][ZigbeeGateway.cpp:349] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 54654][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 11
[ 54654][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 54655][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 54656][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[ 54656][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 17 size: 2
[ 54656][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x20
[ 54657][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x82
[ 54657][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2861, 0x2861, 0x0, 0x0
[ 54658][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[ 54662][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 54662][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 54663][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 54664][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[ 54664][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 19 size: 17
[ 54664][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x01
[ 54665][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00
[ 54665][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00
[ 54665][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x20
[ 54666][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x93
[ 54666][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x04
[ 54666][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00
[ 54667][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00
[ 54667][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x42
[ 54667][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x07
[ 54668][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x48
[ 54668][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x4F
[ 54668][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x42
[ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x45
[ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x49
[ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x41
[ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x4E
[ 54670][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2861, 0x2861, 0x0, 0x0
[ 54670][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[ 54849][I][ZigbeeGateway.cpp:355] zbQueryDeviceBasicCluster(): basic tsn 0x0
[ 56168][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[ 56781][I][ZigbeeCore.cpp:388] esp_zb_app_signal_handler(): Network(0x89d7) is open for 180 seconds
[ 56849][E][ZigbeeGateway.cpp:359] zbQueryDeviceBasicCluster(): Error while querying basic cluster attribute 0x4
[ 56850][I][Z2S_Gateway.ino:1500] loop(): Error while pairing - cann't read manufacturer id. Gateway will restart, try to pair device once again!
Scheduling soft restart in 0 ms
LAST STATE ADDED: Software reset (54)
Current status: [41] Software reset
[ 56851][I][ZigbeeGateway.cpp:1261] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[ 57291][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[ 57292][V][ZigbeeHandlers.cpp:191] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x2861) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 57292][V][ZigbeeHandlers.cpp:198] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0x0), attribute(0xffde)
[ 57353][I][ZigbeeGateway.cpp:1261] sendAttributeWrite(): Sending 'write attribute' command - id (0x9), type (0x20), size (0x1), value (0x1)
[ 57807][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[ 57807][V][ZigbeeHandlers.cpp:191] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x2861) src endpoint(1) to dst endpoint(1) cluster(0xfcc0)
[ 57808][V][ZigbeeHandlers.cpp:198] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0xfcc0), attribute(0x9)
[ 57855][D][Z2S_Gateway.ino:2021] loop(): Unknown model ::, no binding is possible
[ 57855][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 57856][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO
Reset requested. Reset device
LittleFsConfig: writing to file "/supla-dev.cfg"
LittleFsConfig: writing to file "/supla-dev.cfg.bak"
[ 58982][V][AP.cpp:108] _onApEvent(): AP Started
[ 58983][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 130 - AP_START
[ 58983][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 130 - AP_START
[ 58987][V][AP.cpp:112] _onApEvent(): AP Stopped
[ 58988][V][AP.cpp:108] _onApEvent(): AP Started
[ 58988][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 131 - AP_STOP
[ 58989][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 131 - AP_STOP
[ 58989][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 130 - AP_START
[ 58990][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 130 - AP_START
[ 58991][V][AP.cpp:112] _onApEvent(): AP Stopped
[ 58992][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 131 - AP_STOP
[ 58992][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 131 - AP_STOP
[ 58997][V][STA.cpp:216] _onStaEvent(): STA Disconnected: SSID: Supla, BSSID: 82:ee:52:e0:2b:0e, Reason: 8
[ 58997][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 113 - STA_DISCONNECTED
[ 58998][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 113 - STA_DISCONNECTED
[ 58998][W][STA.cpp:137] _onStaArduinoEvent(): Reason: 8 - ASSOC_LEAVE
WiFi Station disconnected
[ 59001][V][STA.cpp:190] _onStaEvent(): STA Stopped
[ 59001][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 111 - STA_STOP
[ 59002][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 111 - STA_STOP
[ 59007][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 100 - WIFI_OFF
[ 59007][V][NetworkInterface.cpp:262] destroyNetif(): Unregistered event handler
Resetting in 0.5s...
See you soon!
ESP-ROM:esp32c6-20220919
Build:Sep 19 2022
rst:0xc (SW_CPU),boot:0xc (SPI_FAST_FLASH_BOOT)
Saved PC:0x4001975a
SPIWP:0xee
mode:DIO, clock div:2
load:0x40875720,len:0x1228
load:0x4086c110,len:0xd9c
load:0x4086e610,len:0x2f74
entry 0x4086c110
[ 1][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4206a3dc
[ 12][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4206a3ca
[ 23][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4206a3b8
[ 35][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4206a3a6
[ 46][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4206a3dc
[ 57][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4206a3ca
[ 69][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4206a3b8
[ 80][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4206a3a6
[ 91][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4206a3dc
[ 103][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4206a3ca
[ 114][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4206a3b8
[ 125][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4206a3a6
[ 137][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DM (38) successfully set to 0x42062fca
[ 148][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DP (39) successfully set to 0x42062fca
[ 160][V][NetworkServer.h:41] NetworkServer(): NetworkServer::NetworkServer(port=23, ...)
[ 168][V][ZigbeeEP.cpp:21] ZigbeeEP(): Endpoint: 1
[ 200][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 17 successfully set to type UART_RX (2) with bus 0x4081bdf4
[ 211][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 16 successfully set to type UART_TX (3) with bus 0x4081bdf4
[ 221][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 12 successfully set to type USB_DM (38) with bus 0x40827084
[ 232][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 13 successfully set to type USB_DP (39) with bus 0x40827084
=========== Before Setup Start ===========
Chip Info:
------------------------------------------
Model : ESP32-C6
Package : 0
Revision : 0.01
Cores : 1
CPU Frequency : 160 MHz
XTAL Frequency : 40 MHz
Features Bitfield : 0x00000052
Embedded Flash : No
Embedded PSRAM : No
2.4GHz WiFi : Yes
Classic BT : No
BT Low Energy : Yes
IEEE 802.15.4 : Yes
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
Total Size : 332508 B ( 324.7 KB)
Free Bytes : 277724 B ( 271.2 KB)
Allocated Bytes : 42296 B ( 41.3 KB)
Minimum Free Bytes: 277724 B ( 271.2 KB)
Largest Free Block: 249844 B ( 244.0 KB)
------------------------------------------
Flash Info:
------------------------------------------
Chip Size : 8388608 B (8 MB)
Block Size : 65536 B ( 64.0 KB)
Sector Size : 4096 B ( 4.0 KB)
Page Size : 256 B ( 0.2 KB)
Bus Speed : 40 MHz
Bus Mode : QIO
------------------------------------------
Partitions Info:
------------------------------------------
nvs : addr: 0x00009000, size: 20.0 KB, type: DATA, subtype: NVS
otadata : addr: 0x0000E000, size: 8.0 KB, type: DATA, subtype: OTA
app0 : addr: 0x00010000, size: 3328.0 KB, type: APP, subtype: OTA_0
app1 : addr: 0x00350000, size: 3328.0 KB, type: APP, subtype: OTA_1
spiffs : addr: 0x00690000, size: 1384.0 KB, type: DATA, subtype: SPIFFS
zb_storage : addr: 0x007EA000, size: 16.0 KB, type: DATA, subtype: FAT
zb_fct : addr: 0x007EE000, size: 4.0 KB, type: DATA, subtype: FAT
rcp_fw : addr: 0x007EF000, size: 4.0 KB, type: DATA, subtype: SPIFFS
coredump : addr: 0x007F0000, size: 64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
Compile Date/Time : Jun 29 2025 10:13:25
Compile Host OS : linux
ESP-IDF Version : v5.4.1-1-g2f7dcd862a-dirty
Arduino Version : 3.2.0
------------------------------------------
Board Info:
------------------------------------------
Arduino Board : ESP32C6_DEV
Arduino Variant : esp32c6
Arduino FQBN : esp32:esp32:esp32c6:PartitionScheme=zigbee_zczr_8MB,ZigbeeMode=zczr,FlashSize=8M,CDCOnBoot=cdc,DebugLevel=verbose
============ Before Setup End ============
[ 355][I][Z2S_Gateway.ino:1140] setup(): setup start
[ 356][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace
[ 356][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 9 successfully set to type GPIO (1) with bus 0xa
[ 357][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace
[ 357][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 3 successfully set to type GPIO (1) with bus 0x4
[ 457][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace
[ 458][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 14 successfully set to type GPIO (1) with bus 0xf
[ 459][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace
[ 459][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type GPIO (1) with bus 0x9
[ 460][V][esp32-hal-rmt.c:454] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 460][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type RMT_TX (10) successfully set to 0x42068eca
[ 461][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type RMT_RX (11) successfully set to 0x42068eca
[ 461][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type INIT (0) with bus 0x0
[ 462][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type RMT_TX (10) with bus 0x40839710
[ 463][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 464][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 13 0 E5 E4 E5 E4 ]
Section type: 3; size: 19
storedCRC 58597, CRC calc 58597
LittleFsConfig: file "/supla-dev.cfg" size 970
LittleFsConfig: initializing storage from file...
LittleFsConfig: init result success
LittleFsConfig: writing to file "/supla-dev.cfg"
LittleFsConfig: writing to file "/supla-dev.cfg.bak"
ConfigTypesBitmap: Set config type 0 to 1
Channel[110] initial caption set to 'IAS ZONE NOTIFICATIONS'
Button[0] setHoldTime: 2000
Button[0] setMulticlickTime: 500
Button[0]::configureAsConfigButton
Button[0] setHoldTime: 5000
Button[0] setMulticlickTime: 300
[ 610][I][z2s_devices_table.cpp:563] Z2S_loadZBDevicesTable(): Z2S_getZBDevicesTableSize 4864, sizeof(z2s_zb_devices_table) 4864, sizeof(z2s_zb_device_params_t) 152, sizeof(bool)1
[ 635][I][z2s_devices_table.cpp:640] Z2S_loadZBDevicesTable(): Zigbee devices table load success!
[ 636][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 0
RECORD ID 1
MANUFACTURER NAME _TZ3000_wkai4ga5
MODEL NAME TS0044
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINTS COUNT 0x4
POWER SOURCE 0x0
MODEL 20736
LAST RSSI 0
LAST SEEN (MS) 2771
KEEP ALIVE (MS) 0
TIMEOUT (MS) 0
BATTERY () 148
USER FLAGS 0
USER DATA 0
SUPLA CH[0] 0
SUPLA CH[1] 1
SUPLA CH[2] 2
SUPLA CH[3] 3
SUPLA CH[4] 4
SUPLA CH[5] 5
SUPLA CH[6] 6
SUPLA CH[7] 7
SUPLA CH[8] 8
SUPLA CH[9] 9
SUPLA CH[10] 10
SUPLA CH[11] 11
SUPLA CH[12] 255
SUPLA CH[13] 255
SUPLA CH[14] 255
SUPLA CH[15] 255
[ 639][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 1
RECORD ID 1
MANUFACTURER NAME _TZ3210_up3pngle
MODEL NAME TS0205
IEEE ADDRESS A4:C1:38:2F:FD:D:4:14
SHORT ADDRESS 0xACB6
ENDPOINTS COUNT 0x1
POWER SOURCE 0x3
MODEL 8192
LAST RSSI 0
LAST SEEN (MS) 2771
KEEP ALIVE (MS) 0
TIMEOUT (MS) 0
BATTERY () 228
USER FLAGS 0
USER DATA 0
SUPLA CH[0] 12
SUPLA CH[1] 255
SUPLA CH[2] 255
SUPLA CH[3] 255
SUPLA CH[4] 255
SUPLA CH[5] 255
SUPLA CH[6] 255
SUPLA CH[7] 255
SUPLA CH[8] 255
SUPLA CH[9] 255
SUPLA CH[10] 255
SUPLA CH[11] 255
SUPLA CH[12] 255
SUPLA CH[13] 255
SUPLA CH[14] 255
SUPLA CH[15] 255
[ 641][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 2
RECORD ID 1
MANUFACTURER NAME _TZE200_n8dljorx
MODEL NAME TS0601
IEEE ADDRESS A4:C1:38:45:60:A9:D0:79
SHORT ADDRESS 0x671A
ENDPOINTS COUNT 0x1
POWER SOURCE 0x3
MODEL 8192
LAST RSSI 0
LAST SEEN (MS) 2771
KEEP ALIVE (MS) 0
TIMEOUT (MS) 0
BATTERY () 148
USER FLAGS 0
USER DATA 0
SUPLA CH[0] 13
SUPLA CH[1] 255
SUPLA CH[2] 255
SUPLA CH[3] 255
SUPLA CH[4] 255
SUPLA CH[5] 255
SUPLA CH[6] 255
SUPLA CH[7] 255
SUPLA CH[8] 255
SUPLA CH[9] 255
SUPLA CH[10] 255
SUPLA CH[11] 255
SUPLA CH[12] 255
SUPLA CH[13] 255
SUPLA CH[14] 255
SUPLA CH[15] 255
[ 644][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 3
RECORD ID 1
MANUFACTURER NAME _TZE284_myd45weu
MODEL NAME TS0601
IEEE ADDRESS A4:C1:38:34:1A:6B:6B:7B
SHORT ADDRESS 0x3EB6
ENDPOINTS COUNT 0x1
POWER SOURCE 0x3
MODEL 4353
LAST RSSI 0
LAST SEEN (MS) 195827
KEEP ALIVE (MS) 0
TIMEOUT (MS) 0
BATTERY () 178
USER FLAGS 0
USER DATA 0
SUPLA CH[0] 14
SUPLA CH[1] 255
SUPLA CH[2] 255
SUPLA CH[3] 255
SUPLA CH[4] 255
SUPLA CH[5] 255
SUPLA CH[6] 255
SUPLA CH[7] 255
SUPLA CH[8] 255
SUPLA CH[9] 255
SUPLA CH[10] 255
SUPLA CH[11] 255
SUPLA CH[12] 255
SUPLA CH[13] 255
SUPLA CH[14] 255
SUPLA CH[15] 255
[ 646][I][z2s_devices_table.cpp:206] Z2S_loadDevicesTable(): Z2S_getDevicesTableSize 15360, sizeof(z2s_devices_table) 15360, sizeof(z2s_device_params_t) 120, sizeof(bool)1
[ 675][I][z2s_devices_table.cpp:335] Z2S_loadDevicesTable(): Devices table load success!
[ 676][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 0
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x1
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 0
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #1 PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 0
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 678][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 1
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x1
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 1
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #1 DOUBLE PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 1
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 679][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 2
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x1
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 2
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #1 HELD
SUPLA CHANNEL FUNCTION 130
SUB ID 2
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 681][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 3
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x2
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 3
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #2 PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 0
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 683][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 4
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x2
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 4
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #2 DOUBLE PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 1
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 685][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 5
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x2
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 5
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #2 HELD
SUPLA CHANNEL FUNCTION 130
SUB ID 2
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 687][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 6
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x3
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 6
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #3 PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 0
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 689][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 7
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x3
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 7
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #3 DOUBLE PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 1
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 691][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 8
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x3
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 8
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #3 HELD
SUPLA CHANNEL FUNCTION 130
SUB ID 2
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 693][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 9
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x4
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 9
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #4 PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 0
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 695][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 10
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x4
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 10
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #4 DOUBLE PRESSED
SUPLA CHANNEL FUNCTION 130
SUB ID 1
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 697][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 11
IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1
SHORT ADDRESS 0x42E9
ENDPOINT 0x4
CLUSTER 0x6
MODEL 5100
SUPLA CHANNEL 11
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 11000
SUPLA CHANNEL NAME BUTTON #4 HELD
SUPLA CHANNEL FUNCTION 130
SUB ID 2
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 0
[ 699][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 12
IEEE ADDRESS A4:C1:38:2F:FD:D:4:14
SHORT ADDRESS 0xACB6
ENDPOINT 0x1
CLUSTER 0x500
MODEL 2000
SUPLA CHANNEL 12
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 1000
SUPLA CHANNEL NAME
SUPLA CHANNEL FUNCTION 0
SUB ID -1
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 1
[ 701][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 13
IEEE ADDRESS A4:C1:38:45:60:A9:D0:79
SHORT ADDRESS 0x671A
ENDPOINT 0x1
CLUSTER 0x500
MODEL 2000
SUPLA CHANNEL 13
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 1000
SUPLA CHANNEL NAME
SUPLA CHANNEL FUNCTION 0
SUB ID -1
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 2
[ 703][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 14
IEEE ADDRESS A4:C1:38:34:1A:6B:6B:7B
SHORT ADDRESS 0x3EB6
ENDPOINT 0x1
CLUSTER 0xEF00
MODEL 1101
SUPLA CHANNEL 14
SUPLA SECONDARY CHANNEL 255
SUPLA CHANNEL TYPE 3038
SUPLA CHANNEL NAME
SUPLA CHANNEL FUNCTION 0
SUB ID -1
USER FLAGS 0
USER DATA(1) 0
USER DATA(2) 0
USER DATA(3) 0
USER DATA(4) 0
KEEP ALIVE(S) 0
TIMEOUT(S) 0
REFRESH(S) 0
ZB device id 3
[ 704][I][z2s_devices_table.cpp:687] Z2S_initSuplaChannels(): initSuplaChannels starting
ConfigTypesBitmap: Set config type 0 to 1
Channel[0] initial caption set to 'BUTTON #1 PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[1] initial caption set to 'BUTTON #1 DOUBLE PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[2] initial caption set to 'BUTTON #1 HELD'
ConfigTypesBitmap: Set config type 0 to 1
Channel[3] initial caption set to 'BUTTON #2 PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[4] initial caption set to 'BUTTON #2 DOUBLE PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[5] initial caption set to 'BUTTON #2 HELD'
ConfigTypesBitmap: Set config type 0 to 1
Channel[6] initial caption set to 'BUTTON #3 PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[7] initial caption set to 'BUTTON #3 DOUBLE PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[8] initial caption set to 'BUTTON #3 HELD'
ConfigTypesBitmap: Set config type 0 to 1
Channel[9] initial caption set to 'BUTTON #4 PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[10] initial caption set to 'BUTTON #4 DOUBLE PRESSED'
ConfigTypesBitmap: Set config type 0 to 1
Channel[11] initial caption set to 'BUTTON #4 HELD'
ConfigTypesBitmap: Set config type 0 to 1
Notification: registered - context 12
ConfigTypesBitmap: Set config type 0 to 1
Notification: registered - context 13
ConfigTypesBitmap: Set config type 0 to 1
[ 708][D][ZigbeeCore.cpp:86] addEndpoint(): Endpoint: 1, Device ID: 0x0050
*** Supla - starting initialization (platform 0)
*** Supla - Config initalization
Automatic firmware update is disabled
Device mode: 0
Security level: Supla CA
*** Supla - Config load for elements
RemoteDeviceConfig: Registering field 0x00000010
Clock: automaticTimeSync: 1
Channel[110] function missing. Using SW defaults
Button[0] don't load config
PowerCycle: 0 (enabled)
Channel[0] function missing. Using SW defaults
Channel[1] function missing. Using SW defaults
Channel[2] function missing. Using SW defaults
Channel[3] function missing. Using SW defaults
Channel[4] function missing. Using SW defaults
Channel[5] function missing. Using SW defaults
Channel[6] function missing. Using SW defaults
Channel[7] function missing. Using SW defaults
Channel[8] function missing. Using SW defaults
Channel[9] function missing. Using SW defaults
Channel[10] function missing. Using SW defaults
Channel[11] function missing. Using SW defaults
Channel[12] loaded function: 236
Binary[12] setServerInvertLogic 0
Binary[12] config serverInvertLogic 0
Channel[13] loaded function: 230
Binary[13] setServerInvertLogic 0
Binary[13] config serverInvertLogic 0
Channel[14] temperature correction 0.00
Channel[14] humidity correction 0.00
*** Supla - Config load for elements done
*** Supla - Load state storage
Validating storage state section with current device configuration
Storage state section validation successful
readStorage: 4; Read: [0 0 0 0 ]
readStorage: 1; Read: [0 ]
Relay[110] restored relay state: OFF
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [0 ]
readStorage: 1; Read: [1 ]
*** Supla - Load state storage done
*** Supla - Init elements
Relay[110] turn OFF (duration 0 ms)
Button[0]: Initialized: pin 9, pullUp 1, invertLogic 1, state 1
Channel(13) value changed to 1
Channel(14) value changed to temp(-275.00), humi(-1.00)
*** Supla - Init elements done
GUID: CF49D4EC0031305AAA0D93377F219553
Device name: Zigbee to Supla Gateway
Device software version: SDK 25.06.01-dev
*** Supla - Initializing network layer
[Wi-Fi] Network AP/hostname: ZIGBEE-TO-SUPLA-GA-F0F5BD03090C
Using Supla protocol version 23
Current status: [5] SuplaDevice initialized
Enter normal mode
[Wi-Fi] setNormalMode
*** Supla - Initialization done
=========== After Setup Start ============
INTERNAL Memory Info:
------------------------------------------
Total Size : 332508 B ( 324.7 KB)
Free Bytes : 272308 B ( 265.9 KB)
Allocated Bytes : 45504 B ( 44.4 KB)
Minimum Free Bytes: 268388 B ( 262.1 KB)
Largest Free Block: 245748 B ( 240.0 KB)
------------------------------------------
GPIO Info:
------------------------------------------
GPIO : BUS_TYPE[bus/unit][chan]
--------------------------------------
3 : GPIO
8 : RMT_TX
9 : GPIO
12 : USB_DM
13 : USB_DP
14 : GPIO
16 : UART_TX[0]
17 : UART_RX[0]
============ After Setup End =============
LittleFsConfig: writing to file "/supla-dev.cfg"
LittleFsConfig: writing to file "/supla-dev.cfg.bak"
WiFi: establishing connection with SSID: "Supla"
[ 862][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 101 - WIFI_READY
[ 940][V][STA.cpp:186] _onStaEvent(): STA Started
[ 940][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 110 - STA_START
[ 940][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 110 - STA_START
[ 989][V][STA.cpp:206] _onStaEvent(): STA Connected: SSID: Supla, BSSID: 82:ee:52:e0:2b:0e, Channel: 3, Auth: WPA2_PSK
[ 990][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 112 - STA_CONNECTED
[ 991][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 112 - STA_CONNECTED
[ 2014][V][NetworkInterface.cpp:78] _onIpEvent(): sta Got New IP: 192.168.0.126 MASK: 255.255.255.0 GW: 192.168.0.10
[ 2014][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 115 - STA_GOT_IP
[ 2015][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 115 - STA_GOT_IP
[ 2015][V][STA.cpp:171] _onStaArduinoEvent(): STA IP: 192.168.0.126, MASK: 255.255.255.0, GW: 192.168.0.10
Connected BSSID: 82:EE:52:E0:2B:0E
local IP: 192.168.0.126
subnetMask: 255.255.255.0
gatewayIP: 192.168.0.10
Signal strength (RSSI): -30 dBm
Establishing encrypted connection with: beta-cloud.supla.org (port: 2016)
[ 2044][D][NetworkManager.cpp:83] hostByName(): Clearing DNS cache
[ 2057][D][NetworkManager.cpp:127] hostByName(): DNS found IPv4 95.217.7.69
[ 2057][V][ssl_client.cpp:68] start_ssl_client(): Free internal heap before TLS 215808
[ 2058][V][ssl_client.cpp:75] start_ssl_client(): Starting socket (domain 2)
[ 2099][V][ssl_client.cpp:170] start_ssl_client(): Seeding the random number generator
[ 2104][V][ssl_client.cpp:178] start_ssl_client(): Setting up the SSL/TLS structure...
[ 2105][V][ssl_client.cpp:198] start_ssl_client(): Loading CA cert
[ 2114][V][ssl_client.cpp:292] start_ssl_client(): Setting hostname for TLS session...
[ 2114][V][ssl_client.cpp:313] ssl_starttls_handshake(): Performing the SSL/TLS handshake...
[ 2876][V][ssl_client.cpp:334] ssl_starttls_handshake(): Verifying peer X.509 certificate...
[ 2876][V][ssl_client.cpp:342] ssl_starttls_handshake(): Certificate verified.
[ 2877][V][ssl_client.cpp:358] ssl_starttls_handshake(): Free internal heap after TLS 177056
Connected via IP 192.168.0.126
SSL error: 48, UNKNOWN ERROR CODE (0030)
LAST STATE ADDED: UNKNOWN ERROR CODE (0030)
Connected to Supla Server
Initializing SRPC (proto: 23)
LAST STATE ADDED: Register in progress
Current status: [10] Register in progress
Send: [53 55 50 4C 41 17 01 00 00 00 4B 00 00 00 78 04 00 00 70 69 65 74 72 61 73 2D 38 31 40 74 6C 65 6E 2E 70 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 FB A5 87 43 98 39 7D B0 66 C2 53 2B E7 43 AE CF 49 D4 EC 00 31 30 5A AA 0D 93 37 7F 21 95 53 5A 69 67 62 65 65 20 74 6F 20 53 75 70 6C 61 20 47 61 74 65 77 61 79 00 00 00 00 00 00 00 00 00 00 00 ]
CH[110], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [6E 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[0], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [00 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[1], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [01 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[2], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [02 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[3], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [03 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[4], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [04 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[5], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [05 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[6], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [06 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[7], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [07 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[8], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [08 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[9], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [09 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[10], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [0A 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[11], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [0B 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[12], type: 1000, FuncList: 0x0, function: 236, flags: 0x8010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00]
Send: [0C E8 03 00 00 00 00 00 00 EC 00 00 00 00 00 01 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ]
CH[13], type: 1000, FuncList: 0x0, function: 230, flags: 0x8010000, online, validityTimeSec: 0, icon: 0, value: [01 00 00 00 00 00 00 00]
Send: [0D E8 03 00 00 00 00 00 00 E6 00 00 00 00 00 01 08 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 ]
CH[14], type: 3038, FuncList: 0x0, function: 45, flags: 0x8010000, online, validityTimeSec: 0, icon: 0, value: [c8 cd fb ff 18 fc ff ff]
Send: [0E DE 0B 00 00 00 00 00 00 2D 00 00 00 00 00 01 08 00 00 00 00 00 00 00 00 00 C8 CD FB FF 18 FC FF FF 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1B 01 53 55 50 4C 41 ]
Device registered (activity timeout 120 s, server version: 27, server min version: 1)
LAST STATE ADDED: Registered and ready
Current status: [17] Registered and ready
Changing activity timeout to 30 s
Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ]
Send: [53 55 50 4C 41 ]
Notification: sending registration for context 12
Send: [53 55 50 4C 41 17 03 00 00 00 4C 04 00 00 0B 00 00 00 05 0C 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Notification: sending registration for context 13
Send: [53 55 50 4C 41 17 04 00 00 00 4C 04 00 00 0B 00 00 00 05 0D 00 00 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Send: [53 55 50 4C 41 17 05 00 00 00 E0 01 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 3067][I][Z2S_Gateway.ino:1346] loop(): Starting Zigbee subsystem
[ 3068][D][ZigbeeCore.cpp:167] zigbeeInit(): Initialize Zigbee stack
[ 3071][D][ZigbeeCore.cpp:174] zigbeeInit(): Register all Zigbee EPs in list
[ 3077][I][ZigbeeCore.cpp:182] zigbeeInit(): List of registered Zigbee EPs:
[ 3077][I][ZigbeeCore.cpp:184] zigbeeInit(): Device type: Home Gateway, Endpoint: 1, Device ID: 0x0050
[ 3086][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Config Ready (0x17), status: ESP_FAIL
[ 3087][I][ZigbeeCore.cpp:276] esp_zb_app_signal_handler(): Zigbee stack initialized
[ 3092][I][ZigbeeCore.cpp:391] esp_zb_app_signal_handler(): Network(0x89d7) closed, devices joining not allowed.
[ 3094][I][ZigbeeCore.cpp:282] esp_zb_app_signal_handler(): Device started up in non factory-reset mode
[ 3094][I][ZigbeeCore.cpp:295] esp_zb_app_signal_handler(): Device rebooted
[ 3094][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): Opening network for joining for 180 seconds
[ 3095][D][ZigbeeCore.cpp:542] searchBindings(): Requesting binding table for address 0x0000
[ 3097][D][ZigbeeCore.cpp:482] bindingTableCb(): Binding table callback for address 0x0000 with status 0
[ 3098][D][ZigbeeCore.cpp:485] bindingTableCb(): Binding table info: total 9, index 0, count 3
[ 3098][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 1, cluster_id 0x0006, dst_addr_mode 3
[ 3099][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x1), cluster id(0x6)
[ 3100][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff
[ 3101][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff
[ 3102][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff
[ 3103][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff
[ 3104][I][ZigbeeGateway.cpp:998] addBoundDevice(): New Zigbee device unit registered - IEEE address a4:c1:38:ae:2f:e0:ce:e1, short address 0x42e9, model id 0x5100, last seen (ms) 0
[ 3104][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 108, short addr: 0x4083, ieee addr: 40:82:03:70:40:82:03:70
[ 3105][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 2, cluster_id 0x0006, dst_addr_mode 3
[ 3106][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x2), cluster id(0x6)
[ 3106][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff
[ 3107][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff
[ 3108][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff
[ 3109][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff
[ 3109][I][ZigbeeGateway.cpp:984] addBoundDevice(): Zigbee device unit already registered, last short address 0x42e9, current short address 0x42e9
[ 3110][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 148, short addr: 0x4083, ieee addr: 40:86:77:F8:40:82:03:70
[ 3111][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 3, cluster_id 0x0006, dst_addr_mode 3
[ 3112][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x3), cluster id(0x6)
[ 3112][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff
[ 3113][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff
[ 3114][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff
[ 3114][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff
[ 3115][I][ZigbeeGateway.cpp:984] addBoundDevice(): Zigbee device unit already registered, last short address 0x42e9, current short address 0x42e9
[ 3116][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 164, short addr: 0x4084, ieee addr: 40:85:A1:4C:40:82:03:70
[ 3117][D][ZigbeeCore.cpp:482] bindingTableCb(): Binding table callback for address 0x0000 with status 0
[ 3118][D][ZigbeeCore.cpp:485] bindingTableCb(): Binding table info: total 9, index 3, count 3
[ 3118][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 4, cluster_id 0x0006, dst_addr_mode 3
[ 3119][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x4), cluster id(0x6)
[ 3120][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff
[ 3120][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff
[ 3121][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff
[ 3122][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff
[ 3123][I][ZigbeeGateway.cpp:984] addBoundDevice(): Zigbee device unit already registered, last short address 0x42e9, current short address 0x42e9
[ 3123][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 200, short addr: 0x4084, ieee addr: 40:86:76:EC:40:82:03:70
[ 3124][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 1, cluster_id 0x0001, dst_addr_mode 3
[ 3125][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0xacb6) on endpoint(0x1), cluster id(0x1)
[ 3125][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:2f:fd:d:4:14, endpoint 0x1, channel type 0xffffffff
[ 3126][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:2f:fd:d:4:14, endpoint 0x1, channel type 0xffffffff
[ 3127][I][ZigbeeGateway.cpp:998] addBoundDevice(): New Zigbee device unit registered - IEEE address a4:c1:38:2f:fd:d:4:14, short address 0xacb6, model id 0x2000, last seen (ms) 0
[https://pietras-81.aqi.eco/
-
Pietras81
- Posts: 2409
- Joined: Sun Feb 17, 2019 6:56 am
- Location: Osielsko
- Been thanked: 1 time
Pietras81 wrote: Tue Jul 01, 2025 2:43 pm NIe wiem czy coś da się z tego wyczytać. Czujniki temperatury
Code: Select all
[ 1][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinee TX power: 20 [ 10034][I][Z2S_Gateway.ino:1463] loop(): getZbgDeviceUnitLastSeenMs 0, current millis 10034 PowerCycle: timeout, counter reset to 0 LittleFsConfig: writing to file "/supla-dev.cfg" LittleFsConfig: writing to file "/supla-dev.cfg.bak" Send: [53 55 50 4C 41 17 31 00 00 00 28 00 00 00 10 00 00 00 8A 0F 64 68 00 00 0 0 00 86 25 0F 00 00 00 00 00 ] Send: [53 55 50 4C 41 ] Recv: [53 55 50 4C 41 17 32 00 00 00 32 00 00 00 10 00 00 00 6C F3 63 68 00 00 0 0 00 0F 0E 00 00 00 00 00 00 53 55 50 4C 41 ] [ 47230][I][ZigbeeCore.cpp:406] esp_zb_app_signal_handler(): Joined device is leaving network (short: 0x7df0), rejoin (NO) [ 53621][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK [ 53625][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK [ 54140][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x2861) [ 54141][V][ZigbeeCore.cpp:359] esp_zb_app_signal_handler(): Device capabilities: 0x80 [ 54141][D][ZigbeeGateway.cpp:518] zbDeviceAnnce(): zbDeviceAnnce short address (0x2861), ieee_addr (0xa4):(0xc1):(0x38):(0xdb):(0xd2):(0xf6):(0x88):(0x89) [ 54142][D][ZigbeeGateway.cpp:521] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x2861), ieee_addr (0xa4):(0xc1):(0x38):(0xdb):(0xd2):(0xf6):(0x88):(0x89) [ 54143][I][ZigbeeGateway.cpp:545] zbDeviceAnnce(): Tuya magic last hope [ 54346][I][ZigbeeGateway.cpp:588] printJoinedDevices(): joined devices: [ 54347][I][ZigbeeGateway.cpp:591] printJoinedDevices(): Device on endpoint 1, short address: 0x2861 [ 54348][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1 [ 54348][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO [ 54349][I][ZigbeeGateway.cpp:349] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4 [ 54654][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 11 [ 54654][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1 [ 54655][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0 [ 54656][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0 [ 54656][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 17 size: 2 [ 54656][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x20 [ 54657][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x82 [ 54657][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2861, 0x2861, 0x0, 0x0 [ 54658][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed--------------------------------------------------------------- [ 54662][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1 [ 54662][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1 [ 54663][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0 [ 54664][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0 [ 54664][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 19 size: 17 [ 54664][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x01 [ 54665][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 [ 54665][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 [ 54665][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x20 [ 54666][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x93 [ 54666][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x04 [ 54666][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 [ 54667][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 [ 54667][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x42 [ 54667][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x07 [ 54668][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x48 [ 54668][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x4F [ 54668][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x42 [ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x45 [ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x49 [ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x41 [ 54669][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x4E [ 54670][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2861, 0x2861, 0x0, 0x0 [ 54670][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed--------------------------------------------------------------- [ 54849][I][ZigbeeGateway.cpp:355] zbQueryDeviceBasicCluster(): basic tsn 0x0 [ 56168][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK [ 56781][I][ZigbeeCore.cpp:388] esp_zb_app_signal_handler(): Network(0x89d7) is open for 180 seconds [ 56849][E][ZigbeeGateway.cpp:359] zbQueryDeviceBasicCluster(): Error while querying basic cluster attribute 0x4 [ 56850][I][Z2S_Gateway.ino:1500] loop(): Error while pairing - cann't read manufacturer id. Gateway will restart, try to pair device once again! Scheduling soft restart in 0 ms LAST STATE ADDED: Software reset (54) Current status: [41] Software reset [ 56851][I][ZigbeeGateway.cpp:1261] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13) [ 57291][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback [ 57292][V][ZigbeeHandlers.cpp:191] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x2861) src endpoint(1) to dst endpoint(1) cluster(0x0) [ 57292][V][ZigbeeHandlers.cpp:198] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0x0), attribute(0xffde) [ 57353][I][ZigbeeGateway.cpp:1261] sendAttributeWrite(): Sending 'write attribute' command - id (0x9), type (0x20), size (0x1), value (0x1) [ 57807][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback [ 57807][V][ZigbeeHandlers.cpp:191] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0x2861) src endpoint(1) to dst endpoint(1) cluster(0xfcc0) [ 57808][V][ZigbeeHandlers.cpp:198] zb_cmd_write_attr_resp_handler(): Write attribute response: status(134), cluster(0xfcc0), attribute(0x9) [ 57855][D][Z2S_Gateway.ino:2021] loop(): Unknown model ::, no binding is possible [ 57855][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1 [ 57856][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO Reset requested. Reset device LittleFsConfig: writing to file "/supla-dev.cfg" LittleFsConfig: writing to file "/supla-dev.cfg.bak" [ 58982][V][AP.cpp:108] _onApEvent(): AP Started [ 58983][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 130 - AP_START [ 58983][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 130 - AP_START [ 58987][V][AP.cpp:112] _onApEvent(): AP Stopped [ 58988][V][AP.cpp:108] _onApEvent(): AP Started [ 58988][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 131 - AP_STOP [ 58989][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 131 - AP_STOP [ 58989][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 130 - AP_START [ 58990][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 130 - AP_START [ 58991][V][AP.cpp:112] _onApEvent(): AP Stopped [ 58992][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 131 - AP_STOP [ 58992][V][AP.cpp:88] _onApArduinoEvent(): Arduino AP Event: 131 - AP_STOP [ 58997][V][STA.cpp:216] _onStaEvent(): STA Disconnected: SSID: Supla, BSSID: 82:ee:52:e0:2b:0e, Reason: 8 [ 58997][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 113 - STA_DISCONNECTED [ 58998][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 113 - STA_DISCONNECTED [ 58998][W][STA.cpp:137] _onStaArduinoEvent(): Reason: 8 - ASSOC_LEAVE WiFi Station disconnected [ 59001][V][STA.cpp:190] _onStaEvent(): STA Stopped [ 59001][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 111 - STA_STOP [ 59002][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 111 - STA_STOP [ 59007][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 100 - WIFI_OFF [ 59007][V][NetworkInterface.cpp:262] destroyNetif(): Unregistered event handler Resetting in 0.5s... See you soon! ESP-ROM:esp32c6-20220919 Build:Sep 19 2022 rst:0xc (SW_CPU),boot:0xc (SPI_FAST_FLASH_BOOT) Saved PC:0x4001975a SPIWP:0xee mode:DIO, clock div:2 load:0x40875720,len:0x1228 load:0x4086c110,len:0xd9c load:0x4086e610,len:0x2f74 entry 0x4086c110 [ 1][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4206a3dc [ 12][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4206a3ca [ 23][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4206a3b8 [ 35][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4206a3a6 [ 46][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4206a3dc [ 57][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4206a3ca [ 69][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4206a3b8 [ 80][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4206a3a6 [ 91][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4206a3dc [ 103][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4206a3ca [ 114][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4206a3b8 [ 125][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4206a3a6 [ 137][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DM (38) successfully set to 0x42062fca [ 148][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DP (39) successfully set to 0x42062fca [ 160][V][NetworkServer.h:41] NetworkServer(): NetworkServer::NetworkServer(port=23, ...) [ 168][V][ZigbeeEP.cpp:21] ZigbeeEP(): Endpoint: 1 [ 200][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 17 successfully set to type UART_RX (2) with bus 0x4081bdf4 [ 211][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 16 successfully set to type UART_TX (3) with bus 0x4081bdf4 [ 221][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 12 successfully set to type USB_DM (38) with bus 0x40827084 [ 232][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 13 successfully set to type USB_DP (39) with bus 0x40827084 =========== Before Setup Start =========== Chip Info: ------------------------------------------ Model : ESP32-C6 Package : 0 Revision : 0.01 Cores : 1 CPU Frequency : 160 MHz XTAL Frequency : 40 MHz Features Bitfield : 0x00000052 Embedded Flash : No Embedded PSRAM : No 2.4GHz WiFi : Yes Classic BT : No BT Low Energy : Yes IEEE 802.15.4 : Yes ------------------------------------------ INTERNAL Memory Info: ------------------------------------------ Total Size : 332508 B ( 324.7 KB) Free Bytes : 277724 B ( 271.2 KB) Allocated Bytes : 42296 B ( 41.3 KB) Minimum Free Bytes: 277724 B ( 271.2 KB) Largest Free Block: 249844 B ( 244.0 KB) ------------------------------------------ Flash Info: ------------------------------------------ Chip Size : 8388608 B (8 MB) Block Size : 65536 B ( 64.0 KB) Sector Size : 4096 B ( 4.0 KB) Page Size : 256 B ( 0.2 KB) Bus Speed : 40 MHz Bus Mode : QIO ------------------------------------------ Partitions Info: ------------------------------------------ nvs : addr: 0x00009000, size: 20.0 KB, type: DATA, subtype: NVS otadata : addr: 0x0000E000, size: 8.0 KB, type: DATA, subtype: OTA app0 : addr: 0x00010000, size: 3328.0 KB, type: APP, subtype: OTA_0 app1 : addr: 0x00350000, size: 3328.0 KB, type: APP, subtype: OTA_1 spiffs : addr: 0x00690000, size: 1384.0 KB, type: DATA, subtype: SPIFFS zb_storage : addr: 0x007EA000, size: 16.0 KB, type: DATA, subtype: FAT zb_fct : addr: 0x007EE000, size: 4.0 KB, type: DATA, subtype: FAT rcp_fw : addr: 0x007EF000, size: 4.0 KB, type: DATA, subtype: SPIFFS coredump : addr: 0x007F0000, size: 64.0 KB, type: DATA, subtype: COREDUMP ------------------------------------------ Software Info: ------------------------------------------ Compile Date/Time : Jun 29 2025 10:13:25 Compile Host OS : linux ESP-IDF Version : v5.4.1-1-g2f7dcd862a-dirty Arduino Version : 3.2.0 ------------------------------------------ Board Info: ------------------------------------------ Arduino Board : ESP32C6_DEV Arduino Variant : esp32c6 Arduino FQBN : esp32:esp32:esp32c6:PartitionScheme=zigbee_zczr_8MB,ZigbeeMode=zczr,FlashSize=8M,CDCOnBoot=cdc,DebugLevel=verbose ============ Before Setup End ============ [ 355][I][Z2S_Gateway.ino:1140] setup(): setup start [ 356][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace [ 356][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 9 successfully set to type GPIO (1) with bus 0xa [ 357][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace [ 357][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 3 successfully set to type GPIO (1) with bus 0x4 [ 457][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace [ 458][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 14 successfully set to type GPIO (1) with bus 0xf [ 459][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type GPIO (1) successfully set to 0x42067ace [ 459][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type GPIO (1) with bus 0x9 [ 460][V][esp32-hal-rmt.c:454] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz [ 460][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type RMT_TX (10) successfully set to 0x42068eca [ 461][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type RMT_RX (11) successfully set to 0x42068eca [ 461][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type INIT (0) with bus 0x0 [ 462][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 8 successfully set to type RMT_TX (10) with bus 0x40839710 [ 463][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1 [ 464][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO Storage initialization readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ] Storage: Number of sections 1 Reading section: 0 readStorage: 7; Read: [3 13 0 E5 E4 E5 E4 ] Section type: 3; size: 19 storedCRC 58597, CRC calc 58597 LittleFsConfig: file "/supla-dev.cfg" size 970 LittleFsConfig: initializing storage from file... LittleFsConfig: init result success LittleFsConfig: writing to file "/supla-dev.cfg" LittleFsConfig: writing to file "/supla-dev.cfg.bak" ConfigTypesBitmap: Set config type 0 to 1 Channel[110] initial caption set to 'IAS ZONE NOTIFICATIONS' Button[0] setHoldTime: 2000 Button[0] setMulticlickTime: 500 Button[0]::configureAsConfigButton Button[0] setHoldTime: 5000 Button[0] setMulticlickTime: 300 [ 610][I][z2s_devices_table.cpp:563] Z2S_loadZBDevicesTable(): Z2S_getZBDevicesTableSize 4864, sizeof(z2s_zb_devices_table) 4864, sizeof(z2s_zb_device_params_t) 152, sizeof(bool)1 [ 635][I][z2s_devices_table.cpp:640] Z2S_loadZBDevicesTable(): Zigbee devices table load success! [ 636][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 0 RECORD ID 1 MANUFACTURER NAME _TZ3000_wkai4ga5 MODEL NAME TS0044 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINTS COUNT 0x4 POWER SOURCE 0x0 MODEL 20736 LAST RSSI 0 LAST SEEN (MS) 2771 KEEP ALIVE (MS) 0 TIMEOUT (MS) 0 BATTERY () 148 USER FLAGS 0 USER DATA 0 SUPLA CH[0] 0 SUPLA CH[1] 1 SUPLA CH[2] 2 SUPLA CH[3] 3 SUPLA CH[4] 4 SUPLA CH[5] 5 SUPLA CH[6] 6 SUPLA CH[7] 7 SUPLA CH[8] 8 SUPLA CH[9] 9 SUPLA CH[10] 10 SUPLA CH[11] 11 SUPLA CH[12] 255 SUPLA CH[13] 255 SUPLA CH[14] 255 SUPLA CH[15] 255 [ 639][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 1 RECORD ID 1 MANUFACTURER NAME _TZ3210_up3pngle MODEL NAME TS0205 IEEE ADDRESS A4:C1:38:2F:FD:D:4:14 SHORT ADDRESS 0xACB6 ENDPOINTS COUNT 0x1 POWER SOURCE 0x3 MODEL 8192 LAST RSSI 0 LAST SEEN (MS) 2771 KEEP ALIVE (MS) 0 TIMEOUT (MS) 0 BATTERY () 228 USER FLAGS 0 USER DATA 0 SUPLA CH[0] 12 SUPLA CH[1] 255 SUPLA CH[2] 255 SUPLA CH[3] 255 SUPLA CH[4] 255 SUPLA CH[5] 255 SUPLA CH[6] 255 SUPLA CH[7] 255 SUPLA CH[8] 255 SUPLA CH[9] 255 SUPLA CH[10] 255 SUPLA CH[11] 255 SUPLA CH[12] 255 SUPLA CH[13] 255 SUPLA CH[14] 255 SUPLA CH[15] 255 [ 641][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 2 RECORD ID 1 MANUFACTURER NAME _TZE200_n8dljorx MODEL NAME TS0601 IEEE ADDRESS A4:C1:38:45:60:A9:D0:79 SHORT ADDRESS 0x671A ENDPOINTS COUNT 0x1 POWER SOURCE 0x3 MODEL 8192 LAST RSSI 0 LAST SEEN (MS) 2771 KEEP ALIVE (MS) 0 TIMEOUT (MS) 0 BATTERY () 148 USER FLAGS 0 USER DATA 0 SUPLA CH[0] 13 SUPLA CH[1] 255 SUPLA CH[2] 255 SUPLA CH[3] 255 SUPLA CH[4] 255 SUPLA CH[5] 255 SUPLA CH[6] 255 SUPLA CH[7] 255 SUPLA CH[8] 255 SUPLA CH[9] 255 SUPLA CH[10] 255 SUPLA CH[11] 255 SUPLA CH[12] 255 SUPLA CH[13] 255 SUPLA CH[14] 255 SUPLA CH[15] 255 [ 644][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 3 RECORD ID 1 MANUFACTURER NAME _TZE284_myd45weu MODEL NAME TS0601 IEEE ADDRESS A4:C1:38:34:1A:6B:6B:7B SHORT ADDRESS 0x3EB6 ENDPOINTS COUNT 0x1 POWER SOURCE 0x3 MODEL 4353 LAST RSSI 0 LAST SEEN (MS) 195827 KEEP ALIVE (MS) 0 TIMEOUT (MS) 0 BATTERY () 178 USER FLAGS 0 USER DATA 0 SUPLA CH[0] 14 SUPLA CH[1] 255 SUPLA CH[2] 255 SUPLA CH[3] 255 SUPLA CH[4] 255 SUPLA CH[5] 255 SUPLA CH[6] 255 SUPLA CH[7] 255 SUPLA CH[8] 255 SUPLA CH[9] 255 SUPLA CH[10] 255 SUPLA CH[11] 255 SUPLA CH[12] 255 SUPLA CH[13] 255 SUPLA CH[14] 255 SUPLA CH[15] 255 [ 646][I][z2s_devices_table.cpp:206] Z2S_loadDevicesTable(): Z2S_getDevicesTableSize 15360, sizeof(z2s_devices_table) 15360, sizeof(z2s_device_params_t) 120, sizeof(bool)1 [ 675][I][z2s_devices_table.cpp:335] Z2S_loadDevicesTable(): Devices table load success! [ 676][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 0 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x1 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 0 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #1 PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 0 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 678][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 1 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x1 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 1 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #1 DOUBLE PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 1 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 679][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 2 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x1 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 2 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #1 HELD SUPLA CHANNEL FUNCTION 130 SUB ID 2 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 681][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 3 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x2 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 3 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #2 PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 0 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 683][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 4 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x2 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 4 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #2 DOUBLE PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 1 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 685][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 5 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x2 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 5 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #2 HELD SUPLA CHANNEL FUNCTION 130 SUB ID 2 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 687][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 6 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x3 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 6 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #3 PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 0 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 689][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 7 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x3 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 7 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #3 DOUBLE PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 1 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 691][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 8 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x3 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 8 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #3 HELD SUPLA CHANNEL FUNCTION 130 SUB ID 2 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 693][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 9 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x4 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 9 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #4 PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 0 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 695][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 10 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x4 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 10 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #4 DOUBLE PRESSED SUPLA CHANNEL FUNCTION 130 SUB ID 1 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 697][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 11 IEEE ADDRESS A4:C1:38:AE:2F:E0:CE:E1 SHORT ADDRESS 0x42E9 ENDPOINT 0x4 CLUSTER 0x6 MODEL 5100 SUPLA CHANNEL 11 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 11000 SUPLA CHANNEL NAME BUTTON #4 HELD SUPLA CHANNEL FUNCTION 130 SUB ID 2 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 0 [ 699][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 12 IEEE ADDRESS A4:C1:38:2F:FD:D:4:14 SHORT ADDRESS 0xACB6 ENDPOINT 0x1 CLUSTER 0x500 MODEL 2000 SUPLA CHANNEL 12 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 1000 SUPLA CHANNEL NAME SUPLA CHANNEL FUNCTION 0 SUB ID -1 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 1 [ 701][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 13 IEEE ADDRESS A4:C1:38:45:60:A9:D0:79 SHORT ADDRESS 0x671A ENDPOINT 0x1 CLUSTER 0x500 MODEL 2000 SUPLA CHANNEL 13 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 1000 SUPLA CHANNEL NAME SUPLA CHANNEL FUNCTION 0 SUB ID -1 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 2 [ 703][I][z2s_telnet_server.cpp:47] log_i_telnet(): ENTRY 14 IEEE ADDRESS A4:C1:38:34:1A:6B:6B:7B SHORT ADDRESS 0x3EB6 ENDPOINT 0x1 CLUSTER 0xEF00 MODEL 1101 SUPLA CHANNEL 14 SUPLA SECONDARY CHANNEL 255 SUPLA CHANNEL TYPE 3038 SUPLA CHANNEL NAME SUPLA CHANNEL FUNCTION 0 SUB ID -1 USER FLAGS 0 USER DATA(1) 0 USER DATA(2) 0 USER DATA(3) 0 USER DATA(4) 0 KEEP ALIVE(S) 0 TIMEOUT(S) 0 REFRESH(S) 0 ZB device id 3 [ 704][I][z2s_devices_table.cpp:687] Z2S_initSuplaChannels(): initSuplaChannels starting ConfigTypesBitmap: Set config type 0 to 1 Channel[0] initial caption set to 'BUTTON #1 PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[1] initial caption set to 'BUTTON #1 DOUBLE PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[2] initial caption set to 'BUTTON #1 HELD' ConfigTypesBitmap: Set config type 0 to 1 Channel[3] initial caption set to 'BUTTON #2 PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[4] initial caption set to 'BUTTON #2 DOUBLE PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[5] initial caption set to 'BUTTON #2 HELD' ConfigTypesBitmap: Set config type 0 to 1 Channel[6] initial caption set to 'BUTTON #3 PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[7] initial caption set to 'BUTTON #3 DOUBLE PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[8] initial caption set to 'BUTTON #3 HELD' ConfigTypesBitmap: Set config type 0 to 1 Channel[9] initial caption set to 'BUTTON #4 PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[10] initial caption set to 'BUTTON #4 DOUBLE PRESSED' ConfigTypesBitmap: Set config type 0 to 1 Channel[11] initial caption set to 'BUTTON #4 HELD' ConfigTypesBitmap: Set config type 0 to 1 Notification: registered - context 12 ConfigTypesBitmap: Set config type 0 to 1 Notification: registered - context 13 ConfigTypesBitmap: Set config type 0 to 1 [ 708][D][ZigbeeCore.cpp:86] addEndpoint(): Endpoint: 1, Device ID: 0x0050 *** Supla - starting initialization (platform 0) *** Supla - Config initalization Automatic firmware update is disabled Device mode: 0 Security level: Supla CA *** Supla - Config load for elements RemoteDeviceConfig: Registering field 0x00000010 Clock: automaticTimeSync: 1 Channel[110] function missing. Using SW defaults Button[0] don't load config PowerCycle: 0 (enabled) Channel[0] function missing. Using SW defaults Channel[1] function missing. Using SW defaults Channel[2] function missing. Using SW defaults Channel[3] function missing. Using SW defaults Channel[4] function missing. Using SW defaults Channel[5] function missing. Using SW defaults Channel[6] function missing. Using SW defaults Channel[7] function missing. Using SW defaults Channel[8] function missing. Using SW defaults Channel[9] function missing. Using SW defaults Channel[10] function missing. Using SW defaults Channel[11] function missing. Using SW defaults Channel[12] loaded function: 236 Binary[12] setServerInvertLogic 0 Binary[12] config serverInvertLogic 0 Channel[13] loaded function: 230 Binary[13] setServerInvertLogic 0 Binary[13] config serverInvertLogic 0 Channel[14] temperature correction 0.00 Channel[14] humidity correction 0.00 *** Supla - Config load for elements done *** Supla - Load state storage Validating storage state section with current device configuration Storage state section validation successful readStorage: 4; Read: [0 0 0 0 ] readStorage: 1; Read: [0 ] Relay[110] restored relay state: OFF readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [0 ] readStorage: 1; Read: [1 ] *** Supla - Load state storage done *** Supla - Init elements Relay[110] turn OFF (duration 0 ms) Button[0]: Initialized: pin 9, pullUp 1, invertLogic 1, state 1 Channel(13) value changed to 1 Channel(14) value changed to temp(-275.00), humi(-1.00) *** Supla - Init elements done GUID: CF49D4EC0031305AAA0D93377F219553 Device name: Zigbee to Supla Gateway Device software version: SDK 25.06.01-dev *** Supla - Initializing network layer [Wi-Fi] Network AP/hostname: ZIGBEE-TO-SUPLA-GA-F0F5BD03090C Using Supla protocol version 23 Current status: [5] SuplaDevice initialized Enter normal mode [Wi-Fi] setNormalMode *** Supla - Initialization done =========== After Setup Start ============ INTERNAL Memory Info: ------------------------------------------ Total Size : 332508 B ( 324.7 KB) Free Bytes : 272308 B ( 265.9 KB) Allocated Bytes : 45504 B ( 44.4 KB) Minimum Free Bytes: 268388 B ( 262.1 KB) Largest Free Block: 245748 B ( 240.0 KB) ------------------------------------------ GPIO Info: ------------------------------------------ GPIO : BUS_TYPE[bus/unit][chan] -------------------------------------- 3 : GPIO 8 : RMT_TX 9 : GPIO 12 : USB_DM 13 : USB_DP 14 : GPIO 16 : UART_TX[0] 17 : UART_RX[0] ============ After Setup End ============= LittleFsConfig: writing to file "/supla-dev.cfg" LittleFsConfig: writing to file "/supla-dev.cfg.bak" WiFi: establishing connection with SSID: "Supla" [ 862][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 101 - WIFI_READY [ 940][V][STA.cpp:186] _onStaEvent(): STA Started [ 940][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 110 - STA_START [ 940][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 110 - STA_START [ 989][V][STA.cpp:206] _onStaEvent(): STA Connected: SSID: Supla, BSSID: 82:ee:52:e0:2b:0e, Channel: 3, Auth: WPA2_PSK [ 990][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 112 - STA_CONNECTED [ 991][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 112 - STA_CONNECTED [ 2014][V][NetworkInterface.cpp:78] _onIpEvent(): sta Got New IP: 192.168.0.126 MASK: 255.255.255.0 GW: 192.168.0.10 [ 2014][V][NetworkEvents.cpp:117] _checkForEvent(): Network Event: 115 - STA_GOT_IP [ 2015][V][STA.cpp:110] _onStaArduinoEvent(): Arduino STA Event: 115 - STA_GOT_IP [ 2015][V][STA.cpp:171] _onStaArduinoEvent(): STA IP: 192.168.0.126, MASK: 255.255.255.0, GW: 192.168.0.10 Connected BSSID: 82:EE:52:E0:2B:0E local IP: 192.168.0.126 subnetMask: 255.255.255.0 gatewayIP: 192.168.0.10 Signal strength (RSSI): -30 dBm Establishing encrypted connection with: beta-cloud.supla.org (port: 2016) [ 2044][D][NetworkManager.cpp:83] hostByName(): Clearing DNS cache [ 2057][D][NetworkManager.cpp:127] hostByName(): DNS found IPv4 95.217.7.69 [ 2057][V][ssl_client.cpp:68] start_ssl_client(): Free internal heap before TLS 215808 [ 2058][V][ssl_client.cpp:75] start_ssl_client(): Starting socket (domain 2) [ 2099][V][ssl_client.cpp:170] start_ssl_client(): Seeding the random number generator [ 2104][V][ssl_client.cpp:178] start_ssl_client(): Setting up the SSL/TLS structure... [ 2105][V][ssl_client.cpp:198] start_ssl_client(): Loading CA cert [ 2114][V][ssl_client.cpp:292] start_ssl_client(): Setting hostname for TLS session... [ 2114][V][ssl_client.cpp:313] ssl_starttls_handshake(): Performing the SSL/TLS handshake... [ 2876][V][ssl_client.cpp:334] ssl_starttls_handshake(): Verifying peer X.509 certificate... [ 2876][V][ssl_client.cpp:342] ssl_starttls_handshake(): Certificate verified. [ 2877][V][ssl_client.cpp:358] ssl_starttls_handshake(): Free internal heap after TLS 177056 Connected via IP 192.168.0.126 SSL error: 48, UNKNOWN ERROR CODE (0030) LAST STATE ADDED: UNKNOWN ERROR CODE (0030) Connected to Supla Server Initializing SRPC (proto: 23) LAST STATE ADDED: Register in progress Current status: [10] Register in progress Send: [53 55 50 4C 41 17 01 00 00 00 4B 00 00 00 78 04 00 00 70 69 65 74 72 61 73 2D 38 31 40 74 6C 65 6E 2E 70 6C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 FB A5 87 43 98 39 7D B0 66 C2 53 2B E7 43 AE CF 49 D4 EC 00 31 30 5A AA 0D 93 37 7F 21 95 53 5A 69 67 62 65 65 20 74 6F 20 53 75 70 6C 61 20 47 61 74 65 77 61 79 00 00 00 00 00 00 00 00 00 00 00 ] CH[110], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [6E 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[0], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [00 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[1], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [01 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[2], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [02 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[3], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [03 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[4], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [04 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[5], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [05 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[6], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [06 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[7], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [07 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[8], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [08 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[9], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [09 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[10], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [0A 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[11], type: 2900, FuncList: 0xEF, function: 130, flags: 0x9010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [0B 54 0B 00 00 EF 00 00 00 82 00 00 00 00 00 01 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[12], type: 1000, FuncList: 0x0, function: 236, flags: 0x8010000, online, validityTimeSec: 0, icon: 0, value: [00 00 00 00 00 00 00 00] Send: [0C E8 03 00 00 00 00 00 00 EC 00 00 00 00 00 01 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ] CH[13], type: 1000, FuncList: 0x0, function: 230, flags: 0x8010000, online, validityTimeSec: 0, icon: 0, value: [01 00 00 00 00 00 00 00] Send: [0D E8 03 00 00 00 00 00 00 E6 00 00 00 00 00 01 08 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 ] CH[14], type: 3038, FuncList: 0x0, function: 45, flags: 0x8010000, online, validityTimeSec: 0, icon: 0, value: [c8 cd fb ff 18 fc ff ff] Send: [0E DE 0B 00 00 00 00 00 00 2D 00 00 00 00 00 01 08 00 00 00 00 00 00 00 00 00 C8 CD FB FF 18 FC FF FF 00 ] Send: [53 55 50 4C 41 ] Recv: [53 55 50 4C 41 17 01 00 00 00 46 00 00 00 07 00 00 00 03 00 00 00 78 1B 01 53 55 50 4C 41 ] Device registered (activity timeout 120 s, server version: 27, server min version: 1) LAST STATE ADDED: Registered and ready Current status: [17] Registered and ready Changing activity timeout to 30 s Send: [53 55 50 4C 41 17 02 00 00 00 D2 00 00 00 01 00 00 00 1E ] Send: [53 55 50 4C 41 ] Notification: sending registration for context 12 Send: [53 55 50 4C 41 17 03 00 00 00 4C 04 00 00 0B 00 00 00 05 0C 00 00 00 00 00 00 00 00 00 ] Send: [53 55 50 4C 41 ] Notification: sending registration for context 13 Send: [53 55 50 4C 41 17 04 00 00 00 4C 04 00 00 0B 00 00 00 05 0D 00 00 00 00 00 00 00 00 00 ] Send: [53 55 50 4C 41 ] Send: [53 55 50 4C 41 17 05 00 00 00 E0 01 00 00 00 00 00 00 ] Send: [53 55 50 4C 41 ] [ 3067][I][Z2S_Gateway.ino:1346] loop(): Starting Zigbee subsystem [ 3068][D][ZigbeeCore.cpp:167] zigbeeInit(): Initialize Zigbee stack [ 3071][D][ZigbeeCore.cpp:174] zigbeeInit(): Register all Zigbee EPs in list [ 3077][I][ZigbeeCore.cpp:182] zigbeeInit(): List of registered Zigbee EPs: [ 3077][I][ZigbeeCore.cpp:184] zigbeeInit(): Device type: Home Gateway, Endpoint: 1, Device ID: 0x0050 [ 3086][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Config Ready (0x17), status: ESP_FAIL [ 3087][I][ZigbeeCore.cpp:276] esp_zb_app_signal_handler(): Zigbee stack initialized [ 3092][I][ZigbeeCore.cpp:391] esp_zb_app_signal_handler(): Network(0x89d7) closed, devices joining not allowed. [ 3094][I][ZigbeeCore.cpp:282] esp_zb_app_signal_handler(): Device started up in non factory-reset mode [ 3094][I][ZigbeeCore.cpp:295] esp_zb_app_signal_handler(): Device rebooted [ 3094][I][ZigbeeCore.cpp:299] esp_zb_app_signal_handler(): Opening network for joining for 180 seconds [ 3095][D][ZigbeeCore.cpp:542] searchBindings(): Requesting binding table for address 0x0000 [ 3097][D][ZigbeeCore.cpp:482] bindingTableCb(): Binding table callback for address 0x0000 with status 0 [ 3098][D][ZigbeeCore.cpp:485] bindingTableCb(): Binding table info: total 9, index 0, count 3 [ 3098][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 1, cluster_id 0x0006, dst_addr_mode 3 [ 3099][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x1), cluster id(0x6) [ 3100][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff [ 3101][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff [ 3102][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff [ 3103][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x1, channel type 0xffffffff [ 3104][I][ZigbeeGateway.cpp:998] addBoundDevice(): New Zigbee device unit registered - IEEE address a4:c1:38:ae:2f:e0:ce:e1, short address 0x42e9, model id 0x5100, last seen (ms) 0 [ 3104][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 108, short addr: 0x4083, ieee addr: 40:82:03:70:40:82:03:70 [ 3105][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 2, cluster_id 0x0006, dst_addr_mode 3 [ 3106][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x2), cluster id(0x6) [ 3106][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff [ 3107][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff [ 3108][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff [ 3109][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x2, channel type 0xffffffff [ 3109][I][ZigbeeGateway.cpp:984] addBoundDevice(): Zigbee device unit already registered, last short address 0x42e9, current short address 0x42e9 [ 3110][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 148, short addr: 0x4083, ieee addr: 40:86:77:F8:40:82:03:70 [ 3111][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 3, cluster_id 0x0006, dst_addr_mode 3 [ 3112][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x3), cluster id(0x6) [ 3112][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff [ 3113][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff [ 3114][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff [ 3114][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x3, channel type 0xffffffff [ 3115][I][ZigbeeGateway.cpp:984] addBoundDevice(): Zigbee device unit already registered, last short address 0x42e9, current short address 0x42e9 [ 3116][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 164, short addr: 0x4084, ieee addr: 40:85:A1:4C:40:82:03:70 [ 3117][D][ZigbeeCore.cpp:482] bindingTableCb(): Binding table callback for address 0x0000 with status 0 [ 3118][D][ZigbeeCore.cpp:485] bindingTableCb(): Binding table info: total 9, index 3, count 3 [ 3118][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 4, cluster_id 0x0006, dst_addr_mode 3 [ 3119][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0x42e9) on endpoint(0x4), cluster id(0x6) [ 3120][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff [ 3120][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff [ 3121][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff [ 3122][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:ae:2f:e0:ce:e1, endpoint 0x4, channel type 0xffffffff [ 3123][I][ZigbeeGateway.cpp:984] addBoundDevice(): Zigbee device unit already registered, last short address 0x42e9, current short address 0x42e9 [ 3123][D][ZigbeeCore.cpp:512] bindingTableCb(): Device bound to EP 1 -> device endpoint: 200, short addr: 0x4084, ieee addr: 40:86:76:EC:40:82:03:70 [ 3124][D][ZigbeeCore.cpp:495] bindingTableCb(): Binding table record: src_endp 1, dst_endp 1, cluster_id 0x0001, dst_addr_mode 3 [ 3125][I][z2s_devices_table.cpp:1602] Z2S_onBTCBoundDevice(): BTC bound device(0xacb6) on endpoint(0x1), cluster id(0x1) [ 3125][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:2f:fd:d:4:14, endpoint 0x1, channel type 0xffffffff [ 3126][I][z2s_devices_table.cpp:124] Z2S_findChannelNumberNextSlot(): Z2S_findChannelNumberNextSlot a4:c1:38:2f:fd:d:4:14, endpoint 0x1, channel type 0xffffffff [ 3127][I][ZigbeeGateway.cpp:998] addBoundDevice(): New Zigbee device unit registered - IEEE address a4:c1:38:2f:fd:d:4:14, short address 0xacb6, model id 0x2000, last seen (ms) 0 [
You do not have the required permissions to view the files attached to this post.
https://pietras-81.aqi.eco/
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Niestety, nie doszło do odczytania manufacturer id - musisz spróbować ponownie.Pietras81 wrote: Tue Jul 01, 2025 2:43 pm NIe wiem czy coś da się z tego wyczytać. Czujniki temperatury
Code: Select all
ZigbeeGateway.cpp:359] zbQueryDeviceBasicCluster(): Error while querying basic cluster attribute 0x4 [ 56850][Z2S_Gateway.ino:1500] loop(): Error while pairing - cann't read manufacturer id. Gateway will restart, try to pair device once again! Scheduling soft restart in 0 ms
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
+BWNUcinas wrote: Mon Jun 30, 2025 4:17 pm Proszę o dodanie licznika energii 1-f dwukierunkowy
Peer Manufacturer is "_TZE284_iwn0gpzz"
Peer Model is "TS0601"
Licznik identyczny z wcześniej dodawanym tylko poparzeni był 3-faz
Licznik 3-faz któy działa poprawnie
Peer Manufacturer is "_TZE284_dikb3dp6"
Peer Model is "TS0601"
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Ta żarówka jest już od dawna (0.7.12) w bazielukasz06 wrote: Mon Jun 30, 2025 9:40 pm Witam, doszło mi kilka urzadzeń
Na początek proszę o dodanie żarówki Gui10 od SonoffCode: Select all
[157163][ZigbeeGateway.cpp:389] zbReadBasicCluster(): Peer Model is "CK-BL702-AL-01(7009_Z102LG03-1)"
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
+BWNU (jako T/H póki co)lukasz06 wrote: Mon Jun 30, 2025 9:40 pm Witam, doszło mi kilka urzadzeń
Edit1. Czujnik Temp Sonoff
Manufacturer - Sonoff
Model - SNZB-02LD
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
vajera
- Posts: 7293
- Joined: Wed Oct 31, 2018 7:58 am
- Location: Biedrusko
- Has thanked: 291 times
- Been thanked: 161 times
Ten jest w bramce bodajże od lutegolukasz06 wrote: Mon Jun 30, 2025 9:40 pm Witam, doszło mi kilka urzadzeń
Edit2. Smart Knob
Peer Manufacturer is "_TZ3000_qja6nq5z"
Peer Model is "TS004F"
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
-
Pietras81
- Posts: 2409
- Joined: Sun Feb 17, 2019 6:56 am
- Location: Osielsko
- Been thanked: 1 time
O to chodzi
Peer Manufacturer is "HOBEIAN"
Code: Select all
[ 35118][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0x1bdc)
[ 35118][V][ZigbeeCore.cpp:359] esp_zb_app_signal_handler(): Device capabilities: 0x80
[ 35119][D][ZigbeeGateway.cpp:518] zbDeviceAnnce(): zbDeviceAnnce short address (0x1bdc), ieee_addr (0xa4):(0xc1):(0x38):(0xdb):(0xd2):(0xf6):(0x88):(0x89)
[ 35119][D][ZigbeeGateway.cpp:521] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0x1bdc), ieee_addr (0xa4):(0xc1):(0x38):(0xdb):(0xd2):(0xf6):(0x88):(0x89)
[ 35120][I][ZigbeeGateway.cpp:545] zbDeviceAnnce(): Tuya magic last hope
[ 35324][I][ZigbeeGateway.cpp:588] printJoinedDevices(): joined devices:
[ 35324][I][ZigbeeGateway.cpp:591] printJoinedDevices(): Device on endpoint 1, short address: 0x1bdc
[ 35325][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 35326][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO
[ 35327][I][ZigbeeGateway.cpp:349] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 35704][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 35704][V][ZigbeeHandlers.cpp:155] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0x1bdc) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 35705][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(7)
[ 35705][I][ZigbeeGateway.cpp:382] zbReadBasicCluster(): Peer Manufacturer is "HOBEIAN"
[ 35706][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[ 35706][I][ZigbeeGateway.cpp:402] zbReadBasicCluster(): ZCL version id is "3"
[ 35707][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(147)
[ 35708][I][ZigbeeGateway.cpp:408] zbReadBasicCluster(): ZCL application version id is "147"
[ 35708][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(7)
[ 35709][I][ZigbeeGateway.cpp:389] zbReadBasicCluster(): Peer Model is "ZG-227Z"
[ 35709][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(3)
[ 35710][I][ZigbeeGateway.cpp:414] zbReadBasicCluster(): ZCL power source id is "3"
[ 35710][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(134), cluster(0x0), attribute(0xfffe), type(0x0), value(0)
[ 35714][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 35715][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 35715][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 35716][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[ 35716][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 21 size: 17https://pietras-81.aqi.eco/