Czujniki T/H/P/IL i IAS - zgłoszenia, uwagi, pomysły [bramka Zigbee]

Moderator: vajera

User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Zibi_007 wrote: Mon Jul 07, 2025 9:14 pm Proszę o dodanie czujnika ruchu:
HOBEIAN::ZG-204Z
Dokładnie takiego:
https://www.zigbee2mqtt.io/devices/ZG-204Z.html
+BWNU

Code: Select all

m.quirkCheckinInterval(15000),
            // Occupancy reporting interval is 60s, so allow for one dropped update plus a small safety margin of 5s
            m.iasZoneAlarm({
                zoneType: "occupancy",
                zoneAttributes: ["alarm_1", "battery_low"],
                keepAliveTimeout: 125,
            }),
        ],
        exposes: [
            e.battery(),
            e.battery_voltage(),
            e.enum("sensitivity", ea.ALL, ["low", "medium", "high"]).withDescription("PIR sensor sensitivity"),
            e.enum("keep_time", ea.ALL, [30, 60, 120]).withDescription("PIR keep time in seconds"),
        ],

Code: Select all

key: ["sensitivity", "keep_time"],
    convertSet: async (entity, key, value, meta) => {
        switch (key) {
            case "sensitivity":
                await entity.write("ssIasZone", {currentZoneSensitivityLevel: utils.getFromLookup(value, {low: 0, medium: 1, high: 2})});
                break;
            case "keep_time":
                await entity.write("ssIasZone", {61441: {value: utils.getFromLookup(value, {30: 0, 60: 1, 120: 2}), type: 0x20}});
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

vajera wrote: Wed Jul 09, 2025 8:58 pm
Zibi_007 wrote: Mon Jul 07, 2025 9:14 pm Proszę o dodanie czujnika ruchu:
HOBEIAN::ZG-204Z
Dokładnie takiego:
https://www.zigbee2mqtt.io/devices/ZG-204Z.html
+BWNU

Code: Select all

m.quirkCheckinInterval(15000),
            // Occupancy reporting interval is 60s, so allow for one dropped update plus a small safety margin of 5s
            m.iasZoneAlarm({
                zoneType: "occupancy",
                zoneAttributes: ["alarm_1", "battery_low"],
                keepAliveTimeout: 125,
            }),
        ],
        exposes: [
            e.battery(),
            e.battery_voltage(),
            e.enum("sensitivity", ea.ALL, ["low", "medium", "high"]).withDescription("PIR sensor sensitivity"),
            e.enum("keep_time", ea.ALL, [30, 60, 120]).withDescription("PIR keep time in seconds"),
        ],

Code: Select all

key: ["sensitivity", "keep_time"],
    convertSet: async (entity, key, value, meta) => {
        switch (key) {
            case "sensitivity":
                await entity.write("ssIasZone", {currentZoneSensitivityLevel: utils.getFromLookup(value, {low: 0, medium: 1, high: 2})});
                break;
            case "keep_time":
                await entity.write("ssIasZone", {61441: {value: utils.getFromLookup(value, {30: 0, 60: 1, 120: 2}), type: 0x20}});
Dziękuję. Jestem ciekawy tej czułości. Nigdy do tej pory tego nie było w tych małych g.... ;-), albo nie zwróciłem na to uwagi :)
Widzę też, że będą przebudowy w kodzie. Idzie nowe :) Brawo!
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
LukiSpajder
Posts: 1548
Joined: Tue Aug 18, 2020 2:22 pm
Has thanked: 25 times
Been thanked: 34 times

Post

Proszę o dodanie czujnika gazu na 230 V

https://pl.aliexpress.com/item/10050071 ... pt=glo2pol

[

Code: Select all

Using 'COM3' as serial port.
Showing logs:
[15:44:24]NLME Status Indication, status: 0x6
[15:44:26]NLME Status Indication, status: 0x6
[15:44:27][452325][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Unavailable (0x3c), status: ESP_OK
[15:44:30]Send: [53 55 50 4C 41 17 2B 00 00 00 28 00 00 00 10 00 00 00 D9 DF 6F 68 00 00 00 00 34 35 06 00 00 00 00 00 ]
[15:44:30]Send: [53 55 50 4C 41 ]
[15:44:30]Recv: [53 55 50 4C 41 17 24 00 00 00 32 00 00 00 10 00 00 00 B9 C3 6F 68 00 00 00 00 D9 31 0C 00 00 00 00 00 53 55 50 4C 41 ]
[15:44:36]NLME Status Indication, status: 0x6
[15:44:38][464035][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Unavailable (0x3c), status: ESP_OK
[15:44:39][465169][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: NWK Device Associated (0x12), status: ESP_OK
[15:44:39][465172][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Update (0x30), status: ESP_OK
[15:44:40][465211][I][ZigbeeCore.cpp:355] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xf334)
[15:44:40][465211][V][ZigbeeCore.cpp:359] esp_zb_app_signal_handler(): Device capabilities: 0x8e
[15:44:40][465211][D][ZigbeeGateway.cpp:532] zbDeviceAnnce(): zbDeviceAnnce short address (0xf334), ieee_addr (0xa4):(0xc1):(0x38):(0xc0):(0xc2):(0xc6):(0x21):(0x8b)
[15:44:40][465212][D][ZigbeeGateway.cpp:535] zbDeviceAnnce(): zbDeviceAnnce joined device short address (0xf334), ieee_addr (0xa4):(0xc1):(0x38):(0xc0):(0xc2):(0xc6):(0x21):(0x8b)
[15:44:40][465213][I][ZigbeeGateway.cpp:559] zbDeviceAnnce(): Tuya magic last hope
[15:44:40][465416][I][ZigbeeGateway.cpp:602] printJoinedDevices(): joined devices:
[15:44:40][465416][I][ZigbeeGateway.cpp:605] printJoinedDevices(): Device on endpoint 1, short address: 0xf334
[15:44:40][465419][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[15:44:40][465419][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO
[15:44:40][465421][I][ZigbeeGateway.cpp:363] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[15:44:40]NLME Status Indication, status: 0x9
[15:44:40][465453][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1000) callback
[15:44:40][465454][V][ZigbeeHandlers.cpp:155] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xf334) src endpoint(1) to dst endpoint(1) cluster(0x0)
[15:44:40][465455][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(16)
[15:44:40][465455][I][ZigbeeGateway.cpp:396] zbReadBasicCluster(): Peer Manufacturer is "_TZE284_chbyv06x"
[15:44:40][465456][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x0), type(0x20), value(3)
[15:44:40][465457][I][ZigbeeGateway.cpp:416] zbReadBasicCluster(): ZCL version id is "3"
[15:44:40][465457][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x1), type(0x20), value(78)
[15:44:40][465458][I][ZigbeeGateway.cpp:422] zbReadBasicCluster(): ZCL application version id is "78"
[15:44:40][465458][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(6)
[15:44:40][465459][I][ZigbeeGateway.cpp:403] zbReadBasicCluster(): Peer Model is "TS0601"
[15:44:40][465459][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x7), type(0x30), value(1)
[15:44:40][465460][I][ZigbeeGateway.cpp:428] zbReadBasicCluster(): ZCL power source id is "1"
[15:44:40][465461][V][ZigbeeHandlers.cpp:164] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0xfffe), type(0x30), value(0)
[15:44:40][465461][I][ZigbeeGateway.cpp:432] zbReadBasicCluster(): Attribute 0xFFFE, data type 0x30
[15:44:40][465921][I][ZigbeeGateway.cpp:369] zbQueryDeviceBasicCluster(): basic tsn 0x0
[15:44:40][465921][I][ZigbeeGateway.cpp:363] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[15:44:40]NLME Status Indication, status: 0x9
[15:44:40][465952][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[15:44:40][465953][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[15:44:40][465953][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[15:44:40][465954][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[15:44:40][465954][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 14 size: 14
[15:44:40][465954][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x12 
[15:44:40][465955][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 
[15:44:40][465955][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x86 
[15:44:40][465955][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x05 
[15:44:40][465955][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 
[15:44:40][465956][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 
[15:44:40][465956][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x42 
[15:44:40][465956][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x06 
[15:44:40][465957][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x54 
[15:44:40][465957][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x53 
[15:44:40][465957][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x30 
[15:44:40][465958][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x36 
[15:44:40][465958][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x30 
[15:44:40][465958][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x31 
[15:44:40][465959][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xf334, 0xf334, 0x0, 0x0
[15:44:40][465959][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[15:44:41][466424][I][ZigbeeGateway.cpp:369] zbQueryDeviceBasicCluster(): basic tsn 0x0
[15:44:41][466465][V][ZigbeeCore.cpp:415] esp_zb_app_signal_handler(): ZDO signal: ZDO Device Authorized (0x2f), status: ESP_OK
[15:44:41][466733][I][ZigbeeCore.cpp:388] esp_zb_app_signal_handler(): Network(0x7bc2) is open for 180 seconds
[15:44:42][467213][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:42][467214][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:42][467214][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:42][467214][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:42][467215][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:42][467215][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x23
[15:44:42][467216][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x1
[15:44:42][467216][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x4
[15:44:42][467217][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:42][467217][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:42][467217][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x1
[15:44:42][467403][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:42][467404][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:42][467404][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:42][467405][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 10
[15:44:42][467405][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:42][467406][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x24
[15:44:42][467406][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x2
[15:44:42][467407][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x2
[15:44:42][467407][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:42][467408][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x4
[15:44:42][467408][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:42][467408][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x0
[15:44:42][467409][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x0
[15:44:42][467409][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x0
[15:44:42][467590][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:42][467591][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:42][467591][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:42][467592][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:42][467592][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:42][467592][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x25
[15:44:42][467593][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x6
[15:44:42][467593][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x4
[15:44:42][467594][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:42][467594][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:42][467595][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:42][467781][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:42][467781][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:42][467782][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:42][467782][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 10
[15:44:42][467782][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:42][467783][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x26
[15:44:42][467783][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x7
[15:44:42][467784][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x2
[15:44:42][467784][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:42][467785][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x4
[15:44:42][467785][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:42][467786][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x0
[15:44:42][467786][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x0
[15:44:42][467786][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0xb4
[15:44:42][467967][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:42][467968][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:42][467968][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:42][467969][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:42][467969][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:42][467970][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x27
[15:44:42][467970][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x8
[15:44:42][467970][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x1
[15:44:42][467971][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:42][467971][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:42][467972][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:42][468154][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:42][468155][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:42][468155][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:42][468156][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:42][468156][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:42][468157][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x28
[15:44:42][468157][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x9
[15:44:42][468157][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x4
[15:44:43][468158][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:43][468158][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:43][468159][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x1
[15:44:43][468341][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:43][468342][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:43][468342][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:43][468342][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:43][468343][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:43][468343][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x29
[15:44:43][468344][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0xa
[15:44:43][468344][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x1
[15:44:43][468345][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:43][468345][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:43][468346][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:43][468424][E][ZigbeeGateway.cpp:373] zbQueryDeviceBasicCluster(): Error while querying basic cluster attribute 0x5
[15:44:43][468425][I][ZigbeeGateway.cpp:1358] sendAttributeWrite(): Sending 'write attribute' command - id (0xffde), type (0x20), size (0x1), value (0x13)
[15:44:43][468454][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[15:44:43][468454][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[15:44:43][468455][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[15:44:43][468455][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[15:44:43][468456][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 26 size: 24
[15:44:43][468456][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x11 
[15:44:43][468457][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 
[15:44:43][468457][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x86 
[15:44:43][468457][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x04 
[15:44:43][468457][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 
[15:44:43][468458][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 
[15:44:43][468458][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x42 
[15:44:43][468458][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x10 
[15:44:43][468459][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x5F 
[15:44:43][468459][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x54 
[15:44:43][468459][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x5A 
[15:44:43][468460][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x45 
[15:44:43][468460][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x32 
[15:44:43][468460][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x38 
[15:44:43][468461][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x34 
[15:44:43][468461][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x5F 
[15:44:43][468461][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x63 
[15:44:43][468462][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x68 
[15:44:43][468462][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x62 
[15:44:43][468462][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x79 
[15:44:43][468463][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x76 
[15:44:43][468463][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x30 
[15:44:43][468463][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x36 
[15:44:43][468464][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x78 
[15:44:43][468464][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xf334, 0xf334, 0x0, 0x0
[15:44:43][468464][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[15:44:43][468469][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1001) callback
[15:44:43][468469][V][ZigbeeHandlers.cpp:192] zb_cmd_write_attr_resp_handler(): Write attribute response: from address(0xf334) src endpoint(1) to dst endpoint(1) cluster(0x0)
[15:44:43][468470][V][ZigbeeHandlers.cpp:199] zb_cmd_write_attr_resp_handler(): Write attribute response: status(0), cluster(0x0), attribute(0xffff)
[15:44:43][468471][I][ZigbeeGateway.cpp:925] zbWriteAttrResponse(): tsn = 19, _write_attr_last_tsn = 19, _write_attr_last_tsn_flag = 2
[15:44:43][468471][I][ZigbeeGateway.cpp:939] zbWriteAttrResponse(): zbWriteAttrResponse async, tsn = 19, _set_config_last_tsn_flag = 2
[15:44:43][468528][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:43][468529][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:43][468529][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:43][468530][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:43][468530][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:43][468531][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2a
[15:44:43][468531][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0xd
[15:44:43][468531][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x1
[15:44:43][468532][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:43][468532][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:43][468533][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x1
[15:44:43][468627][I][ZigbeeGateway.cpp:1358] sendAttributeWrite(): Sending 'write attribute' command - id (0x9), type (0x20), size (0x1), value (0x1)
[15:44:43][468689][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0xfcc0, command id: 11
[15:44:43][468689][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[15:44:43][468690][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[15:44:43][468690][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[15:44:43][468691][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 19 size: 2
[15:44:43][468691][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x02 
[15:44:43][468691][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x84 
[15:44:43][468692][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xf334, 0xf334, 0x0, 0x0
[15:44:43][468692][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[15:44:45][470658][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:45][470659][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:45][470659][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:45][470660][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:45][470660][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:45][470660][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2b
[15:44:45][470661][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x1
[15:44:45][470661][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x4
[15:44:45][470662][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:45][470662][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:45][470663][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x1
[15:44:45][470830][E][ZigbeeGateway.cpp:1373] sendAttributeWrite(): Semaphore timeout writing attribute 0x9 - device 0xf334, endpoint 0x1, cluster 0xfffffcc0
[15:44:45][470830][D][Z2S_Gateway.ino:2033] loop(): Unknown model _TZE284_chbyv06x::TS0601, no binding is possible
[15:44:45][470831][V][esp32-hal-rmt.c:305] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[15:44:45][470832][V][esp32-hal-rmt.c:306] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Asked to Loop: NO, LoopCancel: NO
[15:44:45][470849][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:45][470849][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:45][470850][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:45][470850][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 10
[15:44:45][470850][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:45][470851][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2c
[15:44:45][470851][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x2
[15:44:45][470852][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x2
[15:44:45][470852][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:45][470853][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x4
[15:44:45][470853][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:45][470853][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x0
[15:44:45][470854][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x0
[15:44:45][470854][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0x0
[15:44:45][471035][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:45][471036][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:45][471036][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:45][471037][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:45][471037][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:45][471037][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2d
[15:44:45][471038][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x6
[15:44:45][471038][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x4
[15:44:45][471039][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:45][471039][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:45][471040][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:46][471225][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:46][471225][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:46][471225][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:46][471226][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 10
[15:44:46][471226][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:46][471227][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2e
[15:44:46][471227][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x7
[15:44:46][471228][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x2
[15:44:46][471228][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:46][471228][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x4
[15:44:46][471229][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:46][471229][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x7] = 0x0
[15:44:46][471230][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x8] = 0x0
[15:44:46][471230][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x9] = 0xb4
[15:44:46][471412][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:46][471413][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:46][471414][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:46][471414][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:46][471415][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:46][471415][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2f
[15:44:46][471415][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x8
[15:44:46][471416][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x1
[15:44:46][471416][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:46][471417][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:46][471417][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:46][471516][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:46][471516][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 17 from address 0xf334
[15:44:46][471517][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:46][471517][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 3
[15:44:46][471517][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:46][471518][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x2b
[15:44:46][471518][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x42
[15:44:46][471599][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:46][471600][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:46][471601][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:46][471601][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:46][471602][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:46][471602][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x30
[15:44:46][471602][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0x9
[15:44:46][471603][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x4
[15:44:46][471603][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:46][471604][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:46][471604][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x1
[15:44:46][471798][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:46][471799][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:46][471799][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:46][471799][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:46][471800][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:46][471800][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x31
[15:44:46][471801][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0xa
[15:44:46][471801][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x1
[15:44:46][471801][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:46][471802][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:46][471802][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x0
[15:44:46][471833][E][AsyncTCP.cpp:1499] begin(): bind error: -8
[15:44:46][471973][I][ZigbeeHandlers.cpp:37] zb_action_handler(): Receive Zigbee action(0x1040) callback
[15:44:46][471974][I][ZigbeeHandlers.cpp:371] zb_cmd_custom_cluster_req_handler(): Receive custom command: 2 from address 0xf334
[15:44:46][471974][I][ZigbeeHandlers.cpp:372] zb_cmd_custom_cluster_req_handler(): Frame control 0x0
[15:44:46][471975][I][ZigbeeHandlers.cpp:373] zb_cmd_custom_cluster_req_handler(): Payload size: 7
[15:44:46][471975][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x0] = 0x0
[15:44:46][471976][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x1] = 0x32
[15:44:46][471976][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x2] = 0xd
[15:44:46][471977][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x3] = 0x1
[15:44:46][471977][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x4] = 0x0
[15:44:46][471977][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x5] = 0x1
[15:44:46][471978][I][ZigbeeHandlers.cpp:375] zb_cmd_custom_cluster_req_handler(): Payload [0x6] = 0x1
[15:44:46][471978][I][z2s_device_tuya_custom_cluster.cpp:1244] processTuyaCustomCluster(): processing Tuya custom cluster 0xEF00, command id 0x2
[15:44:46][471979][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:c0:c2:c6:21:8b, endpoint 0x1, channel type 0xffffffff
[15:44:46][471980][I][z2s_device_tuya_custom_cluster.cpp:1172] processTuyaDataReport(): processTuyaDataReport failed - no Supla channel for that device
[15:44:46][472055][I][ZigbeeHandlers.cpp:62] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[15:44:46][472055][I][ZigbeeHandlers.cpp:63] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[15:44:46][472055][I][ZigbeeHandlers.cpp:64] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[15:44:46][472056][I][ZigbeeHandlers.cpp:65] zb_raw_cmd_handler(): manuf_specific 0x0
[15:44:46][472057][I][ZigbeeHandlers.cpp:67] zb_raw_cmd_handler(): RAW bufid: 16 size: 2
[15:44:46][472057][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x07 
[15:44:46][472057][I][ZigbeeHandlers.cpp:69] zb_raw_cmd_handler(): 0x00 
[15:44:46][472058][I][ZigbeeHandlers.cpp:74] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xf334, 0xf334, 0x0, 0x0
[15:44:46][472058][I][z2s_devices_table.cpp:1469] Z2S_onCustomCmdReceive(): Z2S_onCustomCmdReceive cluster 0xa, command id 0x0, rssi: -68
[15:44:46][472059][I][z2s_devices_table.cpp:103] Z2S_findChannelNumberSlot(): Z2S_findChannelNumberSlot a4:c1:38:c0:c2:c6:21:8b, endpoint 0x1, channel type 0xffffffff
[15:44:46][472059][I][z2s_devices_table.cpp:1474] Z2S_onCustomCmdReceive(): No channel found for address !8
[15:44:46][472060][I][ZigbeeHandlers.cpp:88] zb_raw_cmd_handler(): ----------------------------raw command not processed---------------------------------------------------------------
[15:44:47]
Serial port closed!
Peer Manufacturer is "_TZE284_chbyv06x"
Peer Model is "TS0601"
Top
LukiSpajder
Posts: 1548
Joined: Tue Aug 18, 2020 2:22 pm
Has thanked: 25 times
Been thanked: 34 times

Post

vajera wrote: Wed Jul 09, 2025 8:58 pm
Zibi_007 wrote: Mon Jul 07, 2025 9:14 pm Proszę o dodanie czujnika ruchu:
HOBEIAN::ZG-204Z
Dokładnie takiego:
https://www.zigbee2mqtt.io/devices/ZG-204Z.html
+BWNU
Jeśli chodzi o ten czujnik to przeszedł dziś do Mnie ten sam model , dodaje się do bramki pojawia się dwa kanały low battery i czujnik otwarcia drzwi :D
Top
maniex36
Posts: 160
Joined: Wed Dec 14, 2022 11:01 pm

Post

Zibi_007 wrote: Wed Jul 09, 2025 8:52 pm
maniex36 wrote: Wed Jul 09, 2025 6:44 pm
vajera wrote: Tue Jul 08, 2025 7:47 pm
Widać, że czujnik jakieś komunikaty wysyła (gateway last seen ms > 0), więc skoro nie widzisz żadnej reakcji w Supla, to potrzebne będą logi z seriala.
A jak odczytać takie logi z seriala? Bo
Podłączyć bramkę pod USB w komputerze i skorzystać z dowolnego serial monitora.
Dzięki.
Top
User avatar
Zibi_007
Posts: 3985
Joined: Tue Oct 31, 2023 10:06 pm
Has thanked: 10 times
Been thanked: 31 times

Post

vajera wrote: Wed Jul 09, 2025 8:58 pm
Zibi_007 wrote: Mon Jul 07, 2025 9:14 pm Proszę o dodanie czujnika ruchu:
HOBEIAN::ZG-204Z
Dokładnie takiego:
https://www.zigbee2mqtt.io/devices/ZG-204Z.html
+BWNU

Code: Select all

m.quirkCheckinInterval(15000),
            // Occupancy reporting interval is 60s, so allow for one dropped update plus a small safety margin of 5s
            m.iasZoneAlarm({
                zoneType: "occupancy",
                zoneAttributes: ["alarm_1", "battery_low"],
                keepAliveTimeout: 125,
            }),
        ],
        exposes: [
            e.battery(),
            e.battery_voltage(),
            e.enum("sensitivity", ea.ALL, ["low", "medium", "high"]).withDescription("PIR sensor sensitivity"),
            e.enum("keep_time", ea.ALL, [30, 60, 120]).withDescription("PIR keep time in seconds"),
        ],

Code: Select all

key: ["sensitivity", "keep_time"],
    convertSet: async (entity, key, value, meta) => {
        switch (key) {
            case "sensitivity":
                await entity.write("ssIasZone", {currentZoneSensitivityLevel: utils.getFromLookup(value, {low: 0, medium: 1, high: 2})});
                break;
            case "keep_time":
                await entity.write("ssIasZone", {61441: {value: utils.getFromLookup(value, {30: 0, 60: 1, 120: 2}), type: 0x20}});
Urządzenie się dodało, a dodatkowo doszedł jeszcze jedn kanał. To jest zamierzone?
You do not have the required permissions to view the files attached to this post.
Image Wiesz, że Supla obsługuje Zigbee? Wstąp do Klubu Promila: https://forum.supla.org/viewtopic.php?t=18018
Image Szukasz nowego GG? Jest tutaj: https://forum.supla.org/viewtopic.php?t=18036
Top
endrju_88
Posts: 448
Joined: Tue Apr 25, 2023 1:02 pm
Has thanked: 3 times
Been thanked: 4 times

Post

Można prosić o dodanie czujnika wykrywania deszczu?

Code: Select all

_TZ3000_otwpdq1d::TS0207
https://pl.aliexpress.com/item/10050087 ... gKHKvD_BwE
Top
User avatar
vajera
Posts: 7293
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

LukiSpajder wrote: Thu Jul 10, 2025 1:47 pm Proszę o dodanie czujnika gazu na 230 V

https://pl.aliexpress.com/item/10050071 ... pt=glo2pol

Peer Manufacturer is "_TZE284_chbyv06x"
Peer Model is "TS0601"
Już jest - razem z custom GUI do testów.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
LukiSpajder
Posts: 1548
Joined: Tue Aug 18, 2020 2:22 pm
Has thanked: 25 times
Been thanked: 34 times

Post

vajera wrote: Mon Jul 28, 2025 1:55 pm
LukiSpajder wrote: Thu Jul 10, 2025 1:47 pm Proszę o dodanie czujnika gazu na 230 V

https://pl.aliexpress.com/item/10050071 ... pt=glo2pol

Peer Manufacturer is "_TZE284_chbyv06x"
Peer Model is "TS0601"
Już jest - razem z custom GUI do testów.
Już myślałem że przepadły te dane czujnika w czeluściach forum :D
Wgrane wszystko od nowa , co prawda dodał się za trzecim razem .
No i moim oczom ukazał się ten widok ;) :
Menu czujnik gazu 230V.png

Łał rewelacja nawet nie wiedziałem że można zmienić melodyjki ( ogólnie jak na czujnik gazu to jest bardzo cichy )
Nie wiem czy to "0,, do wysyłania melodyjek tak miało być ? Ale działa zmiana dźwięku
Test - działa
Wyciszenie (kasowanie alarmu) działa
Zmiana czasu trwania alarmu - nie działa , nie reaguje

W cloud pojawły się cztery kanały :

Stan przycisku - działa
Grzanie czujnik - pokazuje
Stężenie - pokazuje max był 351
Czujnik gazu ikona - działa zmienia stan chociaż musiałem w cloud odwrócić logikę

IMG_9461.jpeg

Czy wysyłać Ci jakieś logi odnośnie zmiany czasu , czy może musi być jakaś procedura aby to zadziałało ?
You do not have the required permissions to view the files attached to this post.
Top
szagal
Posts: 27
Joined: Thu Mar 30, 2017 8:23 pm

Post

Mam takie czujniki
temp.JPG
i one działają dziwnie ... po resecie bramki bardzo długo trzeba czekać na jakieś pomiary, a na zmianę reaguja z dużym opóźnieniem co można zrobić z tym żeby lepsze osiągnąć pomiary ?
You do not have the required permissions to view the files attached to this post.
Top

Return to “Bramka ZigBee”