Zgłoszenia nowych urządzeń [bramka Zigbee]

Moderator: vajera

Dany2
Posts: 26
Joined: Sun Sep 01, 2019 6:15 pm

Post

I mam jeszcze włącznik jednokanałowy

Unknown model _TZ3000_hdc8bbha::TS000F, no binding is possible

Code: Select all

[20:06:34][120018][I][Z2S_Gateway.ino:811] loop(): 
[20:06:35]Recv: [53 55 50 4C 41 17 0B 00 00 00 32 00 00 00 10 00 00 00 44 5A 06 69 00 00 00 00 9E 5F 03 00 00 00 00 00 53 55 50 4C 41 ]
[20:06:38][123711][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:38][123712][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:38][123713][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0xa, command id: 0
[20:06:38][123714][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:38][123714][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:38][123715][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:38][123715][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 19 size: 2
[20:06:38][123716][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x07 
[20:06:38][123716][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:38][123716][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:38][123717][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0xa, cmd id 0x0
[20:06:38][123717][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:38][123718][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:38][123718][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:40][125485][D][AsyncTCP.cpp:1102] _poll(): ack timeout 4
[20:06:40][125686][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:40][125687][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:40][125689][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x6, command id: 10
[20:06:40][125689][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:40][125689][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:40][125690][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:40][125690][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 3 size: 4
[20:06:40][125691][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:40][125691][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:40][125691][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x10 
[20:06:40][125692][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x01 
[20:06:40][125692][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:40][125693][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0x6, cmd id 0xa
[20:06:40][125693][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:40][125694][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:40][125695][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:40][125695][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[20:06:40][125696][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0x2f89) src endpoint(1) to dst endpoint(1) cluster(0x6)
[20:06:40][125697][I][ZigbeeGateway.cpp:1054] zbAttributeReporting(): on/off report ON
[20:06:40][125697][I][z2s_devices_table.cpp:2720] Z2S_onOnOffReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, state 0x1
[20:06:40][125697][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xb54
[20:06:40][125698][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0x3e8
[20:06:40][125699][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xfa0
[20:06:40][125699][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xfaa
[20:06:40][125700][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0x1b58
[20:06:40][125700][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0x2af8
[20:06:40][125701][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:40][126189][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:40][126190][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:40][126191][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x6, command id: 10
[20:06:40][126192][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:40][126192][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:40][126193][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:40][126193][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 6 size: 10
[20:06:40][126193][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x01 
[20:06:40][126194][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x40 
[20:06:40][126194][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x21 
[20:06:40][126194][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:40][126195][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:40][126195][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x02 
[20:06:40][126195][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x40 
[20:06:40][126196][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x21 
[20:06:40][126196][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:40][126196][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:40][126197][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:40][126197][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0x6, cmd id 0xa
[20:06:40][126198][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:40][126198][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:40][126199][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:40][126200][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[20:06:40][126200][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0x2f89) src endpoint(1) to dst endpoint(1) cluster(0x6)
[20:06:40][126201][I][ZigbeeGateway.cpp:1058] zbAttributeReporting(): on/off cluster (0x6), attribute id (0x4001), attribute data type (0x21), attribute value (0x0)
[20:06:40][126201][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[20:06:40][126202][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0x2f89) src endpoint(1) to dst endpoint(1) cluster(0x6)
[20:06:40][126202][I][ZigbeeGateway.cpp:1058] zbAttributeReporting(): on/off cluster (0x6), attribute id (0x4002), attribute data type (0x21), attribute value (0x0)
[20:06:40][126288][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:40][126289][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:40][126290][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0xe001, command id: 10
[20:06:40][126291][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:40][126291][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:40][126292][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:40][126292][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 28 size: 4
[20:06:40][126292][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x10 
[20:06:40][126293][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0xD0 
[20:06:40][126293][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x30 
[20:06:40][126293][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x02 
[20:06:40][126294][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:40][126294][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0xe001, cmd id 0xa
[20:06:40][126295][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:40][126295][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:40][126296][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:40][126297][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[20:06:40][126297][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0x2f89) src endpoint(1) to dst endpoint(1) cluster(0xe001)
[20:06:40][126298][I][ZigbeeGateway.cpp:1334] zbAttributeReporting(): from (0x6816), endpoint (1), cluster (0xe001), attribute id (0xd010), attribute data type (0x30) 
[20:06:41][126326][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:41][126326][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:41][126328][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x6, command id: 10
[20:06:41][126328][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:41][126329][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:41][126329][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:41][126330][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 9 size: 4
[20:06:41][126330][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x02 
[20:06:41][126330][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x80 
[20:06:41][126331][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x30 
[20:06:41][126331][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x02 
[20:06:41][126331][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:41][126332][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0x6, cmd id 0xa
[20:06:41][126332][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:41][126333][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:41][126333][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:41][126334][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[20:06:41][126335][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0x2f89) src endpoint(1) to dst endpoint(1) cluster(0x6)
[20:06:41][126335][I][ZigbeeGateway.cpp:1058] zbAttributeReporting(): on/off cluster (0x6), attribute id (0x8002), attribute data type (0x30), attribute value (0x2)
[20:06:41][126598][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:41][126599][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:41][126600][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x6, command id: 10
[20:06:41][126601][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:41][126601][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:41][126602][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:41][126602][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 10 size: 4
[20:06:41][126603][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x01 
[20:06:41][126603][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x80 
[20:06:41][126603][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x30 
[20:06:41][126603][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x01 
[20:06:41][126604][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:41][126604][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0x6, cmd id 0xa
[20:06:41][126605][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:41][126605][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:41][126606][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:41][126607][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[20:06:41][126607][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0x2f89) src endpoint(1) to dst endpoint(1) cluster(0x6)
[20:06:41][126608][I][ZigbeeGateway.cpp:1058] zbAttributeReporting(): on/off cluster (0x6), attribute id (0x8001), attribute data type (0x30), attribute value (0x1)
[20:06:41][126891][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:41][126891][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:41][126893][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0xe000, command id: 10
[20:06:41][126894][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:41][126894][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:41][126895][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:41][126895][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 12 size: 8
[20:06:41][126895][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x03 
[20:06:41][126896][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0xD0 
[20:06:41][126896][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42 
[20:06:41][126896][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04 
[20:06:41][126897][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x41 
[20:06:41][126897][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x41 
[20:06:41][126897][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x41 
[20:06:41][126898][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x41 
[20:06:41][126898][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:41][126899][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0xe000, cmd id 0xa
[20:06:41][126899][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:41][126900][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:41][126900][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:41][126901][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[20:06:41][126902][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0x2f89) src endpoint(1) to dst endpoint(1) cluster(0xe000)
[20:06:41][126902][I][ZigbeeGateway.cpp:1334] zbAttributeReporting(): from (0x6816), endpoint (1), cluster (0xe000), attribute id (0xd003), attribute data type (0x42) 
[20:06:41][127191][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:41][127192][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:41][127193][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0xe000, command id: 10
[20:06:41][127194][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:41][127194][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:41][127195][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:41][127195][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 14 size: 6
[20:06:41][127195][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x02 
[20:06:41][127196][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0xD0 
[20:06:41][127196][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x48 
[20:06:41][127196][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x02 
[20:06:41][127197][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:41][127197][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x0A 
[20:06:41][127197][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:41][127198][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0xe000, cmd id 0xa
[20:06:41][127199][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:41][127199][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:41][127200][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[20:06:42][127493][D][ZigbeeCore.cpp:479] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[20:06:42][127494][D][ZigbeeCore.cpp:480] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
[20:06:42][127495][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0xe000, command id: 10
[20:06:42][127496][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[20:06:42][127496][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 0, is_manuf_specific 0
[20:06:42][127497][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[20:06:42][127497][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 16 size: 6
[20:06:42][127497][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x01 
[20:06:42][127498][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0xD0 
[20:06:42][127498][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x48 
[20:06:42][127498][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x02 
[20:06:42][127499][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00 
[20:06:42][127499][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x06 
[20:06:42][127499][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0x2f89, 0x2f89, 0x0, 0x0
[20:06:42][127500][I][z2s_devices_table.cpp:3511] Z2S_onCustomCmdReceive(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, cluster 0xe000, cmd id 0xa
[20:06:42][127501][I][z2s_devices_table.cpp:157] Z2S_findChannelNumberSlot(): A4:C1:38:7F:A1:60:68:16, endpoint 0x1, channel type 0xffffffff
[20:06:42][127501][E][z2s_devices_table.cpp:54] no_channel_found_error_func(): No channel found for address A4:C1:38:7F:A1:60:68:16
[20:06:42][127502][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): -

Wielkie dzięki
Top
User avatar
vajera
Posts: 7291
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

Dany2 wrote: Sat Nov 01, 2025 7:08 pm I mam jeszcze włącznik jednokanałowy

Unknown model _TZ3000_hdc8bbha::TS000F, no binding is possible
Wielkie dzięki
+BWNU 0.9.131-01/11/2025
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
zokopian
Posts: 123
Joined: Fri Jan 11, 2019 9:00 pm

Post

vajera wrote: Sat Nov 01, 2025 6:14 pm

+BWNU 0.9.130-01/11/2025
Przy próbie sparowania niestety dalej komunikat: Unknown model AwoX::TLSR82xx, no binding is possible

Log:

Code: Select all

[ 60815][V][ZigbeeCore.cpp:270] openNetwork(): Opening network for joining for 180 seconds
[ 61285][I][ZigbeeCore.cpp:433] esp_zb_app_signal_handler(): Network(0xecf5) is open for 180 seconds
[ 61285][I][Z2S_Gateway.ino:233] Z2S_onOpenNetwork(): Network open for 180 s
[ 61286][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 61286][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 61287][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 70864][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 70865][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 255, cluster_id: 0x0013, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0xfffd, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 96, rx_time: 0
[ 70867][I][ZigbeeCore.cpp:376] esp_zb_app_signal_handler(): New device commissioned or rejoined (short: 0xb938)
[ 70867][V][ZigbeeCore.cpp:380] esp_zb_app_signal_handler(): Device capabilities: 0x8e
[ 70924][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 70925][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 0, src_endpoint: 0, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x8006, asdu_length: 6
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0000, security_status: 0, lqi: 96, rx_time: 0
[ 70927][D][ZigbeeGateway.cpp:491] find_Cb(): BASIC cluster found: short address(0xb938), endpoint(1)
[ 70930][I][ZigbeeGateway.cpp:1029] printJoinedDevices(): joined devices:
[ 70930][I][ZigbeeGateway.cpp:1032] printJoinedDevices(): Device on endpoint 1, short address: 0xb938
[ 70931][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 70933][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 70933][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 70934][I][ZigbeeGateway.cpp:631] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x4
[ 70980][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 70981][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 102, rx_time: 0
[ 70983][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 70983][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 70983][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 70984][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 70984][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 11 size: 9
[ 70985][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 70985][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 70986][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 70986][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 70986][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 70987][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x41
[ 70987][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x77
[ 70987][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 70988][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x58
[ 70988][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 70988][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 70989][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 70990][V][ZigbeeHandlers.cpp:262] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 70990][V][ZigbeeHandlers.cpp:270] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 70991][I][ZigbeeGateway.cpp:685] zbReadBasicCluster(): Peer Manufacturer is "AwoX"
[ 71934][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): basic tsn 0x0
[ 71935][I][ZigbeeGateway.cpp:631] zbQueryDeviceBasicCluster(): Query basic cluster attribute 0x5
[ 71954][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 71955][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0000, asdu_length: 16
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 107, rx_time: 0
[ 71957][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 71957][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 71958][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 71958][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 71959][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 14 size: 13
[ 71959][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x05
[ 71960][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 71960][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 71960][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 71961][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x08
[ 71961][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x54
[ 71961][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4C
[ 71962][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x53
[ 71962][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x52
[ 71962][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x38
[ 71963][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x32
[ 71963][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x78
[ 71963][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x78
[ 71964][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 71964][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 71965][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 71965][V][ZigbeeHandlers.cpp:262] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 71966][V][ZigbeeHandlers.cpp:270] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x5), type(0x42), value(8)
[ 71967][I][ZigbeeGateway.cpp:695] zbReadBasicCluster(): Peer Model is "TLSR82xx"
[ 72935][I][ZigbeeGateway.cpp:637] zbQueryDeviceBasicCluster(): basic tsn 0x1
[ 72937][I][Z2S_Gateway.ino:1042] loop(): LIST matched AwoX::TLSR82xx, entry # 404, endpoints # 1, endpoints 0x0::0x0,0x0::0x0,0x0::0x0,0x0::0x0
Scheduling soft restart in 5000 ms
LAST STATE ADDED: Software reset (70)
[ 72939][I][Z2S_Gateway.ino:118] supla_callback_bridge(): event(0x22), action(0x4010)
Current status: [41] Software reset
[ 72939][D][Z2S_Gateway.ino:1620] loop(): Unknown model AwoX::TLSR82xx, no binding is possible
[ 72940][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 72941][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 72942][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 73943][E][AsyncTCP.cpp:1521] begin(): bind error: -8
[ 73957][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 73958][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 73958][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
[ 73973][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 73974][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 96, rx_time: 0
[ 73976][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 73976][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 73976][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 73977][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 73977][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 15 size: 9
[ 73978][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 73978][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 73979][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 73979][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 73979][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 73980][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x41
[ 73980][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x77
[ 73980][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 73981][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x58
[ 73981][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 73982][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x0, cmd id 0x1
[ 73982][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 73983][E][z2s_devices_table.cpp:56] no_channel_found_error_func(): No channel found for address A4:C1:38:B3:C9:13:44:40
[ 73983][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 73984][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 73985][V][ZigbeeHandlers.cpp:262] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 73986][V][ZigbeeHandlers.cpp:270] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 73986][I][ZigbeeGateway.cpp:685] zbReadBasicCluster(): Peer Manufacturer is "AwoX"
[ 76963][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 76964][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0000, asdu_length: 12
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 102, rx_time: 0
[ 76965][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x0, command id: 1
[ 76966][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 76966][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 76967][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 76968][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 17 size: 9
[ 76968][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 76968][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 76969][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 76969][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 76969][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x04
[ 76970][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x41
[ 76970][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x77
[ 76970][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x6F
[ 76971][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x58
[ 76971][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 76972][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x0, cmd id 0x1
[ 76972][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 76973][E][z2s_devices_table.cpp:56] no_channel_found_error_func(): No channel found for address A4:C1:38:B3:C9:13:44:40
[ 76973][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 76974][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1000) callback
[ 76975][V][ZigbeeHandlers.cpp:262] zb_cmd_read_attr_resp_handler(): Read attribute response: from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x0)
[ 76976][V][ZigbeeHandlers.cpp:270] zb_cmd_read_attr_resp_handler(): Read attribute response: status(0), cluster(0x0), attribute(0x4), type(0x42), value(4)
[ 76976][I][ZigbeeGateway.cpp:685] zbReadBasicCluster(): Peer Manufacturer is "AwoX"
Reset requested. Reset device
[ 77940][V][esp32-hal-rmt.c:490] rmtInit(): GPIO 8 - TX MODE - MemSize[48] - Freq=10000000Hz
[ 77941][V][esp32-hal-rmt.c:307] _rmtWrite(): GPIO: 8 - Request: 24 RMT Symbols - Blocking - Timeout: -1
[ 77941][V][esp32-hal-rmt.c:315] _rmtWrite(): GPIO: 8 - Currently in Loop Mode: [NO] | Loop Request: [NO], LoopCancel: [NO]
LittleFsConfig: writing to file "/supla-dev.cfg"
LittleFsConfig: writing to file "/supla-dev.cfg.bak"
8x SRW-01, 1x SBW-01, 1x MEW-01,
10x TH 10, 7x Touch, 1x SV, 1x Basic R2,
2x S26, 4x mini, 2x POW R2, 1x S55,
3x Shelly 1, 1x nodemcu + BME 280,
2x H801. 4x Nous a1, 4x SP111, 2x NEO
1x MoesHouse, 2x SMTONOFF SMT002
1x Sonoff POW R3 25A
Top
User avatar
vajera
Posts: 7291
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

zokopian wrote: Sat Nov 01, 2025 7:14 pm
vajera wrote: Sat Nov 01, 2025 6:14 pm

+BWNU 0.9.130-01/11/2025
Przy próbie sparowania niestety dalej komunikat: Unknown model AwoX::TLSR82xx, no binding is possible

Log:
Ups, zabrakło jednej definicji ;) - +BWNU 0.9.131-01/11/2025 - za kwadrans.
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
kapikp910i
Posts: 9
Joined: Sun Mar 21, 2021 12:02 am

Post

Głowica sprawdzona i działa.
vajera wrote: Sun Oct 19, 2025 3:18 pm
kapikp910i wrote: Sun Oct 19, 2025 8:40 am Nie zauważyłem, już dosyłam.

Code: Select all

 _TZE204_vjpaih9f::TS0601
+BWNU 0.9.101-19/10/2025 - nowy model, mogą być błędy w datapoints - proszę o informację zwrotną - on/off, czy wyświetla stan pieca (grzeje/ nie grzeje)?
Top
zokopian
Posts: 123
Joined: Fri Jan 11, 2019 9:00 pm

Post

vajera wrote: Sat Nov 01, 2025 7:29 pm

Ups, zabrakło jednej definicji ;) - +BWNU 0.9.131-01/11/2025 - za kwadrans.
Teraz dodał się bez problemu. Wszystko działa jak należy - trzy kanały - wyłącznik, ściemniacz i temperatura barwy białej.
Dzięki.
8x SRW-01, 1x SBW-01, 1x MEW-01,
10x TH 10, 7x Touch, 1x SV, 1x Basic R2,
2x S26, 4x mini, 2x POW R2, 1x S55,
3x Shelly 1, 1x nodemcu + BME 280,
2x H801. 4x Nous a1, 4x SP111, 2x NEO
1x MoesHouse, 2x SMTONOFF SMT002
1x Sonoff POW R3 25A
Top
User avatar
vajera
Posts: 7291
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

zokopian wrote: Sat Nov 01, 2025 8:29 pm
vajera wrote: Sat Nov 01, 2025 7:29 pm

Ups, zabrakło jednej definicji ;) - +BWNU 0.9.131-01/11/2025 - za kwadrans.
Teraz dodał się bez problemu. Wszystko działa jak należy - trzy kanały - wyłącznik, ściemniacz i temperatura barwy białej.
Dzięki.
Działa Ci ta regulacja temperatury bieli? Pytam, bo u "konkurencji" tej opcji nie ma 😉
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
zokopian
Posts: 123
Joined: Fri Jan 11, 2019 9:00 pm

Post

Działa regulacja temperatury bieli - tylko nie zmienia się płynnie - dokładnie trzymając za suwak przy przesuwaniu nie zmienia się płynnie tyko dopiero po jego puszczeniu wskakuje ustawiony zakres..
8x SRW-01, 1x SBW-01, 1x MEW-01,
10x TH 10, 7x Touch, 1x SV, 1x Basic R2,
2x S26, 4x mini, 2x POW R2, 1x S55,
3x Shelly 1, 1x nodemcu + BME 280,
2x H801. 4x Nous a1, 4x SP111, 2x NEO
1x MoesHouse, 2x SMTONOFF SMT002
1x Sonoff POW R3 25A
Top
User avatar
vajera
Posts: 7291
Joined: Wed Oct 31, 2018 7:58 am
Location: Biedrusko
Has thanked: 291 times
Been thanked: 161 times

Post

zokopian wrote: Sat Nov 01, 2025 10:19 pm Działa regulacja temperatury bieli - tylko nie zmienia się płynnie - dokładnie trzymając za suwak przy przesuwaniu nie zmienia się płynnie tyko dopiero po jego puszczeniu wskakuje ustawiony zakres..
Muszę to zweryfikować, ale wydaje mi się, że aplikacja wysyła zmianę stanu dopiero po puszczeniu suwaka?
Bramka Zigbee <=> SUPLA
Więcej informacji tutaj:
https://forum.supla.org/viewforum.php?f=127
FAQ https://forum.supla.org/viewtopic.php?t=17277
Top
zokopian
Posts: 123
Joined: Fri Jan 11, 2019 9:00 pm

Post

Sprawdziłem jeszcze raz - jest lag taki koło sekundy - nie trzeba puszczać suwaka. Tożsama sytuacja jest z regulacją jasności.

log z regulacji jasności:

Code: Select all

[ 35098][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 35099][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 35099][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 35100][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 9 size: 4
[ 35100][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 35101][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 35101][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 35101][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x29
[ 35102][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 35102][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 35103][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 35103][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 35104][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 35105][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 35105][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 35106][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x29
[ 35107][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x29
[ 35107][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 35108][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 35109][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 51, rx_time: 0
[ 35110][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 35111][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 35111][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 35112][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 35112][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 10 size: 4
[ 35113][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 35113][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 35113][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 35114][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x21
[ 35114][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 35115][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 35115][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 35116][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 35116][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 35117][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 35118][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 35118][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x21
[ 35119][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x21
[ 35120][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
Send: [53 55 50 4C 41 17 0F 00 00 00 67 00 00 00 0E 00 00 00 01 00 00 00 00 00 0D 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
[ 35426][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 35426][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0300, asdu_length: 8
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 35428][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x300, command id: 10
[ 35428][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 35429][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 35430][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 35430][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 27 size: 5
[ 35430][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x07
[ 35431][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 35431][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x21
[ 35431][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x10
[ 35432][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x01
[ 35432][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 35433][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x300, cmd id 0xa
[ 35433][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 35434][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 35434][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 35435][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 35436][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x300)
[ 35437][I][ZigbeeGateway.cpp:1358] zbAttributeReporting(): color control cluster color temperature 0x110
Recv: [53 55 50 4C 41 17 12 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 0D 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=13, command=0, toggleOnOff=0
Recv: [53 55 50 4C 41 17 13 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 10 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=16, command=0, toggleOnOff=0
[ 36528][I][Z2S_dimmer_interface.cpp:69] handleNewValueFromServer(): DIMMER ALREADY ON - SEND LEVEL(brightness
Recv: [53 55 50 4C 41 17 14 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 1A 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=26, command=0, toggleOnOff=0
[ 36794][I][Z2S_dimmer_interface.cpp:69] handleNewValueFromServer(): DIMMER ALREADY ON - SEND LEVEL(brightness
Recv: [53 55 50 4C 41 17 15 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 1A 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=26, command=0, toggleOnOff=0
Channel(1) value changed to RGB(0, 0, 0), colBr(0), bright(26)
[ 37455][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37455][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 5
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37457][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 11
[ 37458][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37458][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37459][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37459][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 11 size: 2
[ 37460][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37460][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37460][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37461][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xb
[ 37462][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37462][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37463][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37464][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 37464][V][ZigbeeHandlers.cpp:388] zb_cmd_default_resp_handler(): Received default response: from address(0xb938), src_endpoint(1) to dst_endpoint(1), cluster(0x8) for command (0x0) with status 0x0
[ 37465][V][ZigbeeHandlers.cpp:392] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 37466][I][ZigbeeGateway.cpp:2573] zbCmdDefaultResponse(): tsn = 4, _custom_cmd_last_tsn = 0, _custom_cmd_last_tsn_flag = 255
[ 37466][I][ZigbeeGateway.cpp:2588] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn = 4, _custom_cmd_last_tsn_flag = 255
[ 37467][I][ZigbeeGateway.cpp:2591] zbCmdDefaultResponse(): custom cmd rssi 1413480448
[ 37470][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37470][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37472][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37472][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37473][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37474][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37474][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 22 size: 4
[ 37474][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37475][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37475][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37475][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x24
[ 37476][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37476][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37477][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37478][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37478][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37479][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37480][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37480][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x24
[ 37481][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x24
[ 37481][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37482][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37483][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37485][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37485][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37485][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37486][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37486][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 12 size: 4
[ 37487][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37487][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37487][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37488][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x28
[ 37488][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37489][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37489][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37490][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37491][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37491][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37492][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37493][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x28
[ 37493][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x28
[ 37494][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37497][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37497][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37499][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37499][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37500][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37500][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37501][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 14 size: 4
[ 37501][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37502][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37502][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37502][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2B
[ 37503][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37503][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37504][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37504][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37505][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37506][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37506][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37508][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x2b
[ 37508][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x2b
[ 37509][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37510][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37510][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37513][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37514][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37514][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37515][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37515][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 17 size: 4
[ 37516][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37516][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37516][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37517][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x2E
[ 37517][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37518][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37519][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37519][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37520][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37521][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37521][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37522][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x2e
[ 37523][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x2e
[ 37524][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37527][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37527][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37529][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37530][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37530][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37531][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37531][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 15 size: 4
[ 37531][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37532][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37532][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37532][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x31
[ 37533][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37533][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37534][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37535][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37535][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37536][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37537][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37537][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x31
[ 37538][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x31
[ 37539][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37539][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37540][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 0, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37542][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37542][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37543][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37543][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37543][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 19 size: 4
[ 37544][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37544][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37545][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37545][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x35
[ 37545][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37546][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37546][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37547][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37548][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37548][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37549][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37550][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x35
[ 37550][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x35
[ 37551][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37555][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37556][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 134, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37558][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37558][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37559][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37559][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37560][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 16 size: 4
[ 37560][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37560][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37561][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37561][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x38
[ 37561][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37562][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37563][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37563][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37564][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37565][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37565][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37566][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x38
[ 37567][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x38
[ 37567][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37568][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37569][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37570][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37571][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37571][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37572][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37572][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 20 size: 4
[ 37572][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37573][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37573][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37573][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x3B
[ 37574][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37574][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37575][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37575][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37576][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37577][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37577][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37578][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x3b
[ 37578][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x3b
[ 37579][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37580][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37580][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37582][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37582][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37583][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37583][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37584][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 21 size: 4
[ 37584][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37585][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37585][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37585][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x3F
[ 37586][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37586][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37587][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37587][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37588][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37589][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37589][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37590][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x3f
[ 37591][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x3f
[ 37591][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 37592][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 37593][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 37594][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 37595][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 37595][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 37596][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 37596][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 3 size: 4
[ 37597][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37597][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 37597][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 37598][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x42
[ 37598][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 37598][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 37599][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 37600][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 37600][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 37601][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 37602][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 37603][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x42
[ 37603][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x42
[ 37604][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
Send: [53 55 50 4C 41 17 10 00 00 00 67 00 00 00 0E 00 00 00 01 00 00 00 00 00 1A 00 00 00 00 00 00 00 ]
Send: [53 55 50 4C 41 ]
Recv: [53 55 50 4C 41 17 16 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 1A 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=26, command=0, toggleOnOff=0
Recv: [53 55 50 4C 41 17 17 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 1E 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=30, command=0, toggleOnOff=0
[ 38770][I][Z2S_dimmer_interface.cpp:69] handleNewValueFromServer(): DIMMER ALREADY ON - SEND LEVEL(brightness
Recv: [53 55 50 4C 41 17 18 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 25 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=37, command=0, toggleOnOff=0
[ 39047][I][Z2S_dimmer_interface.cpp:69] handleNewValueFromServer(): DIMMER ALREADY ON - SEND LEVEL(brightness
Recv: [53 55 50 4C 41 17 19 00 00 00 6E 00 00 00 11 00 00 00 76 1D 00 00 01 00 00 00 00 25 00 00 FF 00 00 00 00 53 55 50 4C 41 ]
Z2S_DimmerInterface[1]: red=0, green=255, blue=0, colorBrightness=0, brightness=37, command=0, toggleOnOff=0
Channel(1) value changed to RGB(0, 0, 0), colBr(0), bright(37)
[ 39746][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39746][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 5
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 39748][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 11
[ 39749][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39749][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39750][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39750][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 2 size: 2
[ 39750][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39751][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39751][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39752][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xb
[ 39752][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39753][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39754][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 39754][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x1005) callback
[ 39755][V][ZigbeeHandlers.cpp:388] zb_cmd_default_resp_handler(): Received default response: from address(0xb938), src_endpoint(1) to dst_endpoint(1), cluster(0x8) for command (0x0) with status 0x0
[ 39756][V][ZigbeeHandlers.cpp:392] zb_cmd_default_resp_handler(): command id (11), direction (1), is common (1)
[ 39756][I][ZigbeeGateway.cpp:2573] zbCmdDefaultResponse(): tsn = 5, _custom_cmd_last_tsn = 0, _custom_cmd_last_tsn_flag = 255
[ 39757][I][ZigbeeGateway.cpp:2588] zbCmdDefaultResponse(): zbCustomCmd default response async, tsn = 5, _custom_cmd_last_tsn_flag = 255
[ 39758][I][ZigbeeGateway.cpp:2591] zbCmdDefaultResponse(): custom cmd rssi 218103808
[ 39760][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39761][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 39763][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 39763][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39763][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39764][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39765][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 5 size: 4
[ 39765][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39765][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39766][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 39766][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x45
[ 39766][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39767][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 39768][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39768][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39769][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 39770][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 39770][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 39771][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x45
[ 39772][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x45
[ 39772][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 39775][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39776][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 230, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 39778][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 39778][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39778][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39779][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39779][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 28 size: 4
[ 39780][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39780][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39781][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 39781][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x48
[ 39781][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39782][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 39783][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39783][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39784][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 39785][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 39785][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 39786][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x48
[ 39786][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x48
[ 39787][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 39788][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39788][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 39790][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 39790][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39791][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39791][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39792][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 4 size: 4
[ 39792][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39793][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39793][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 39793][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4A
[ 39794][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39794][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 39795][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39795][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39796][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 39797][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 39797][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 39798][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x4a
[ 39799][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x4a
[ 39799][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 39802][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39803][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 39804][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 39805][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39805][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39806][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39806][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 7 size: 4
[ 39807][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39807][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39807][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 39808][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x4D
[ 39808][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39809][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 39809][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39810][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39810][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 39811][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 39812][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 39813][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x4d
[ 39813][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x4d
[ 39814][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 39815][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39815][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 39817][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 39817][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39818][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39818][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39819][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 8 size: 4
[ 39819][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39819][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39820][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 39820][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x50
[ 39820][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39821][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 39822][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39822][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39823][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 39824][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 39824][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 39825][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x50
[ 39825][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x50
[ 39826][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 39829][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39830][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 56, rx_time: 0
[ 39831][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 39832][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39832][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39833][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39833][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 6 size: 4
[ 39834][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39834][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39834][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 39835][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x53
[ 39835][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39836][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 39836][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39837][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39837][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
[ 39838][I][ZigbeeHandlers.cpp:42] zb_action_handler(): Receive Zigbee action(0x2000) callback
[ 39839][V][ZigbeeHandlers.cpp:234] zb_attribute_reporting_handler(): Received report from address(0xb938) src endpoint(1) to dst endpoint(1) cluster(0x8)
[ 39839][I][ZigbeeGateway.cpp:1311] zbAttributeReporting(): level control cluster current level 0x53
[ 39840][I][z2s_devices_table.cpp:3407] Z2S_onCurrentLevelReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, level 0x53
[ 39841][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xfa0
[ 39842][D][ZigbeeCore.cpp:492] zb_apsde_data_indication_handler(): APSDE INDICATION - Received APSDE-DATA indication, status: 0
[ 39842][D][ZigbeeCore.cpp:493] zb_apsde_data_indication_handler(): APSDE INDICATION - dst_endpoint: 1, src_endpoint: 1, dst_addr_mode: 255
APSDE INDICATION - src_addr_mode: 56, cluster_id: 0x0008, asdu_length: 7
APSDE INDICATION - dst_short_addr: 0x0000, src_short_addr: 0xb938
APSDE INDICATION - profile_id: 0x0104, security_status: 0, lqi: 66, rx_time: 0
[ 39844][I][ZigbeeHandlers.cpp:138] zb_raw_cmd_handler(): cluster id: 0x8, command id: 10
[ 39844][I][ZigbeeHandlers.cpp:141] zb_raw_cmd_handler(): src endpoint (0x1, dst endpoint 0x1
[ 39845][I][ZigbeeHandlers.cpp:145] zb_raw_cmd_handler(): is common comand 1, disable_default_response 1, is_manuf_specific 0
[ 39845][I][ZigbeeHandlers.cpp:149] zb_raw_cmd_handler(): manuf_specific 0x0
[ 39846][I][ZigbeeHandlers.cpp:153] zb_raw_cmd_handler(): RAW bufid: 10 size: 4
[ 39846][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39847][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x00
[ 39847][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x20
[ 39847][I][ZigbeeHandlers.cpp:156] zb_raw_cmd_handler(): 0x56
[ 39848][I][ZigbeeHandlers.cpp:165] zb_raw_cmd_handler(): ZigbeeHandlers rawCMD 0xb938, 0xb938, 0x0, 0x0
[ 39848][I][z2s_devices_table.cpp:3814] Z2S_onCustomCmdReceive(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, cluster 0x8, cmd id 0xa
[ 39849][I][z2s_devices_table.cpp:159] Z2S_findChannelNumberSlot(): A4:C1:38:B3:C9:13:44:40, endpoint 0x1, channel type 0xffffffff
[ 39849][I][z2s_devices_table.cpp:3824] Z2S_onCustomCmdReceive(): z2s_channels_table[channel_number_slot].Supla_channel 0x0
[ 39850][I][ZigbeeHandlers.cpp:191] zb_raw_cmd_handler(): ----------------------------raw command not processed------------------------------------------------------------
8x SRW-01, 1x SBW-01, 1x MEW-01,
10x TH 10, 7x Touch, 1x SV, 1x Basic R2,
2x S26, 4x mini, 2x POW R2, 1x S55,
3x Shelly 1, 1x nodemcu + BME 280,
2x H801. 4x Nous a1, 4x SP111, 2x NEO
1x MoesHouse, 2x SMTONOFF SMT002
1x Sonoff POW R3 25A
Top

Return to “Bramka ZigBee”